Nokia 9500 LCD screen problems

In my nokia 9500 the big lcd looks like it has scratches on it, but actually it is not, How do I get rid of this. Waht could be the problem.
could anubody help me in this.
Regards
Murali

Sounds like a modern version of the old Psion ribbon cable failure. Yep, needs tender loving care of a Nokia Service Centre!
Steve
Steve Litchfield
3-Lib (Tips/resources/Info for Nokia smartphones and Communicators) plus All About Symbian

Similar Messages

  • Nokia N97 LCD Screen Problems - a never ending sto...

    Hello.
    I recently purchased a new Nokia N97 smartphone. Everything about the phone is awesome, such as GPS, decent camera, good audio and video playback, etc, except for one thing. First thing first, I always see ghosting or 'burn-in' of images on the screen - quiet clearly on bright backgrounds. This is one of many annoyances as it often is visible when your watching movies and will only go away if the screen is off long enough. Another fault with the screen is that it appears to not refresh fast enough as I can often see what appears to be 'scan lines' running horizontal (if the phone is horizontal). Last, but not least, there appears to be diagonal lines crossing the screen from the top left to the buttom right as well as little matrixes of dots, however they do not seem to be on the LCD itself but rather the resistve layer. This may be just a feature to make the screen more reponsive, but I don't know and it is only visible in bright light, but when it is, you can diffently notice it. Does anyone else notice these strange effects? Will a Nokia Care Center help fix it?
    And yes, screen proctectors have been removed.
    Naito.

    I have the exact same problems... Some other problems two.
    When I get a call and my correspondent quits the communication before I do, the phone freezes and I m forced to turn the phone off to deblock it.
    This is really annoying. Some times, just while navigating between menus the screen gets stuck between two menus.
    I purchased the phone 2 days ago and as you sed, its a great phone but not worth the pries, far from it.
    I m goanna bring it back to the shop to have it change to see if its my phone who has a problem or the entire N97 series.
    If that's the case I ll go for an other phone. I have always used Nokia phones, and was happy about them but this time I m am really disappointed.
    I ll let you guys know if I get these problems fixed or if it gets worst.

  • Nokia 5220 WHITE SCREEN PROBLEM *Help plz*

    hello guys ... my phone's (5220) screen has gone White ... !! i have absolutely no idea what the problem is ! i took out the battery and put it back again .. but when i turn it on ..after the nokia logo the screen goes white again !! i cant do anything except for looking at the white screen...! the phone doesnt even turn off until you take out the battery !
    I tried to connect it to my PC (via data cable) but the phone does not get connected with the PC suite !!  PLZ HELP ME  !!

    Jimmyireland is right - anything that you could do yourself requires the phone to at least boot up properly, at the moment your phone is like PC with no Windows involved, it can't find its OS to start.
    The 5220 is a series 40 phone, there is facility for a forced reboot, it needs its software to be reflashed which is why you need the Nokia service point.

  • Nokia 5220 WHITE SCREEN PROBLEM *HELP*

    hello guys ... my phone's (5220) screen has gone White ... !! i have absolutely no idea what the problem is ! i took out the battery and put it back again .. but when i turn it on ..after the nokia logo the screen goes white again !! i cant do anything except for looking at the white screen...! the phone doesnt even turn off until you take out the battery !
    I tried to connect it to my PC (via data cable) but the phone does not get connected with the PC suite !!  PLZ HELP ME  !!

    Hi ahmadace360,  
    Have you performed any sort of software update before this happened? There are two possible things:
    1) Software problem - either by corrupt firmware or failed update.
    2) Hardware problem
    Fixing any of these would require you to send the phone to the Nokia Care Center.

  • Nokia 9500 boot up problem

    I'm still using the Nokia 9500 and still loving it despite having the E90 now. I use the fax features a lot and love the sms scheduling function which sadly none is present in the E90.
    Lately, I have problems of booting up. Each time, a battery is took out and whenever I boot it up, the problem starts when I set the date and time, it becomes awfully slow. Unable to move at all. If I did not set the date and time, no issue. But once I start set the date and time, it becomes terribly slow. Many times, I had to plug out the battery a couple of time before it works but had to ensure that auto time update is on. I tried update the firmware which I had to pay since no more warranty but it still gives the problem. My firmware version now is v.06.27(00).
    Anybody encounter this problem?
    Message Edited by euthenics on 22-Jul-2008 08:22 PM
    Message Edited by euthenics on 22-Jul-2008 08:22 PM

    Any Nokia Support knows what seems to be the problem here?

  • Lenovo T410s LCD screen problem

    I've got a problem with my LCD screen on Lenovo T410s. Everyting worked good so far. Today I wanted to check another LCD for that model which I've got. So I dicsonected the original LCD, and conected the second one to check. After I saw that the second one worked good, I disconected it. Then I conected again the original one and started the laptop. Unfortunately when it started, the screen didn't shine good - it's very dark. I disconected the one and tried back the second LCD, but again the second one shined very bad. Can anybody tell me what could happened? It looks like the inverter is demaged, but I don't even know where is the one inside that model. Please give me some advices
    Solved!
    Go to Solution.

    These fuses are extremely tiny and not meant to be user-replaceable.
    You'd have to pull the board out and start measuring them one by one until you find an "open" one.
    No clue where exactly these are on a T410 board.
    Good luck.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Nokia 9500-Speaker giving problem

    I have Nokia 9500, 2 years old and its speaker has started giving problems. I have got it repaired from Nokia Care point about 7 times and it works fine for 2-3 days, then it goes bad. Care point guys are not able to figure out the problem. Let me know if anyone of you have experienced this. Also how do i directly report this to Nokia, since care point guys are clueless

    what is the exact problem can you let us know in detail
    tongue is too confused on what to speak

  • MSI MEGA PC 651 - LCD SCREEN PROBLEM

    Hi to anyone reading this!!!
    My MEGA PC 651 has now started to show a malfunction on the LCD screen.  Only parts of the LCD is showing and the back light flickers.  I am desperate to fix the machine as everything else works fine apart from the screen!  I've had the machine a while now and really don't want to have to get a new system for the sake of the LCD screen malfunctioning on an otherwise perfectly working system!
    Also, I am happy with everything it does and it is perfect for my needs!
    I've contacted MSI directly, although understandably, they no longer have parts for this machine - (
    Can anyone tell me where I could get a replacement screen/board from or if just the screen can be replaced.  I've had a look and can see the lcd screen fixed to the board and isn't removable - well, it is, but you would have to know what you're doing?!?!?
    IF ANYONE CAN HELP, I WILL BE MOST GREATFUL!!!
    Gary

    UPDATE: This is a barebones system i got.
    now can anyone who has a unit like this tell me if there needs to be a connection made to the system cn4  connection?
    if so what does this cable look like and where can it be found.
    I have checked and there doesnt seem to be any lose cables.
    and can some one tell where cn4  pin get connected to the front panel.
    there doesnt seem to be any connection to connect cn4.
    Please i would like to have this pc up and running.

  • S90 LCD screen problem

    My S90 LCD screen turns off by itself within a few seconds to about 30 secs.  All the other camera functions work while the LCD is off.   When I turn the camera off and turn it back on, the LCD comes back on but goes off again.   I have checked the auto screen time off and I have set to 2 or 3 mins.  But this does not affect the screen time going off by itself.   Is this a camera LCD malfunction or some other electronics inside going bad?   Obviously this is out of warrenty.  Hate to have to spend couple hundred bucks to have this fix if you can buy another camera for a little more.   I have also a S50 model that I had to change the LCD screen before when it went bad.   Any ideas I can command the LCD on my S90 ? TIA

    I am sorry to hear that your PowerShot S90 powers the LCD panel off in about 30 seconds.  If you have it set to something other than this is the Menu, then there is likely an internal issue with your camera.  If this is out of warranty, you can consider sending this into the Factory for evaluation or participate in the Canon Loyalty Program. 
    This program allows you to replace your current camera with a refurbished Canon Camera for a discounted fee, and have it shipped via Second Business Day delivery.  The refurbished unit offered through this program carries a 90 day warranty.  The original non-functioning camera would then be returned to Canon USA for recycling using a prepaid shipping label that would be provided.  If you would like to take part in this option, please call our Sales Department at (866) 443-8002 seven days a week, 8am to Midnight.  Let them know you have been working with email technical support and the Canon Loyalty Program was offered.  Be sure to have your serial number for your camera at the time of your call.
    If you wish to set up a repair, you can do so on our web site.  To start your repair process, you'll need to complete a request on our website.
    http://www.usa.canon.com/cusa/consumer?pageKeyCode=onlineRepairLanding
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Nokia E6 touch screen problem

    My E6 00 comes with symbian belle i bought it last month a week leter the touch screen stop functioning proper, i need to lock it and reopen it every minute for me to use the touch screen and even then its not all the part of the screen that is working like the option key, OK or cancel key, the drop down menu at the top of the screen which can be used to on/off the network connection. I've used *#7370# to format it twice but the problem still remain i regret buying the phone. please ! someone should help me on what to do i'm confuse

    Have you checked that you have the latest firmware onn your device via the device itself or Nokia Suite? If there is an update offered, please update. If that doesn't work, try re-installing your current firmware through Nokia Suite. Failing that, perform a three finger hard reset, and if that doesn't work, then you will need to take your phone to your local Nokia Care point for them to inspect.
    http://nokia.com/support

  • Nokia N95-3 Screen Problem!!

    I recently bought a Nokia N95-3 from Amazon and this is the 6 day that I have it. Last night it was almost fully charged. I left it atop one of my drawers and haven't touch it until about 10 minutes ago. I tried to unlock it and notice that it was turned off! I was wondering why it had turned itself off. I go into my room to charge it and it says low battery! I was wondering how that happened since when I left it last night no programs were running and the backlit light was off. And on the bottom right side of the screen I notice a little something. First I thought it was a smudge, then a pencil mark. I tried to get it off using a microfiber cloth that I use for my camera's screen and that didn't work. It looks like a heart moniter black line about 1 cm long. I have been very careful with my phone and I haven't scratched it,dropped it, or used it carelessly. I even use the little pouch it came in to protect it. Here are some pics of it. Tell me if I should contact Amazon or Nokia! Thanks!
    PIC 1 (http://i133.photobucket.com/albums/q58/dracon27/DSC07696.jpg)
    PIC 2
    (http://i133.photobucket.com/albums/q58/dracon27/DSC07697.jpg)
    PIC 3
    (http://i133.photobucket.com/albums/q58/dracon27/DSC07700.jpg)
    PIC 4
    (http://i133.photobucket.com/albums/q58/dracon27/DSC07701.jpg)

    I have the same problem too. I got 2 growing (and shrinking) black lines near the top. The problem started to happen a few hours after buying it. The weird thing is, the 2 lines grows and shrinks on daily basis. However, when they shrink, they always come back to the full length afterwards. I think this is more of a software related issue than hardware.
    Sending an email to Nokia customer service didn't help. They just didn't reply back.
    I will try to take it back to the store (CompUSA) for a replacement. It's very frustrating. Anyone know how to resolve this issue?

  • Nokia 300 touch screen problems

    hi ,  i have bought this nokia 300 recently and after just three months its touch screen is malfunctioning, the proble is that if u touch the left side if the screen the effect is visiblle on  a little right side, not that exact point which i want to click. e.g if i touch alarm , it open calender, need help 

    uvijay wrote:
    Nokia 300 touch is not working.I understand Nokia touch is not working properly for many people . But unfortunately we bought two touch models of Nokia both not working.
    Hi uvijay,
    Welcome to the forum.
    Have you done calibrating the touchscreens of the two devices? Also, check if soft reset will fix your problem. You can do a soft reset by dialing *#7780#. After that you'll be asked to enter a lock code. Just enter 12345 if have not changed it. You can also do the steps advised by @ng85 (message no. 4) above. 

  • Nokia 5233 touch screen problems

    Sometimes when someone calls me and I try to receive the call by pressing the touch screen button on my 5233, the button does not respond and I have to pick up the call by pressing the green button. Other times it works fine.
    Since the  problem is not regular when I visited the nokia service center they could not provide any solution.
    Would you please suggest something.

    I have the same problem with 5230...unlocking to attend the call by sliding does not work.
    I have one more issue /t5/Nseries-Devices-and-S60/screen-pad-gets-locked-whenn-dialling-5230/td-p/652534

  • E71x lcd screen problem

    Thanks in advance for any advice or suggestion.  My nokia e71x screen went black for some reason, the phone is still working, just that I could see nothing on the screen.  I tried reset several time but it didnot help, I tried to push around the screen with my fingers then the screen would come back on for a few second and went black again.  Any help is greatly appreciated.

    Obviously a hardware problem of some sort if it comes back on when you press on the screen.   I assume you have AT&T service since the E71X is an AT&T specific model.  I would start with AT&T first for a warrenty exchange/repair.
    E71-2 Grey Steel
    type: RM-357 code: 0569371 FW: 410.21.010
    08-02-2010 Nokia E71-2 (236.06)

  • Nokia Asha 310 Screen Problem

    Hello and good day!
    I recently purchased (about 2 weeks ago) a Nokia Asha 310 White and observed that when i turn the screen in landscape mode during web navigation or typing in QWERTY mode the left side seems to fade to black very little, especially when the background is white. Just the left side fades a little bit to black.
    Are all these screen the same or is it just mine?
    If you need a photo to understand the problem, i will try to make one.

    While not being sure about the warranty policies, if your screen is not broken/cracked, it should be honoured under warranty. Although, their decision might be having some valid reasons, you should still ask them as to why that particular component is not covered in warranty as its not externally damaged due to any of your doings.
    If your phone has no water damage, I'm unsure as to why Nokia Care rejected to service it under warranty. Maybe visiting another Care Center nearby might be helpful.
    Screen Cost, I don't have a proper idea, but the simple (non-touch) display of my 6500 cost me 1800. So this larger and touch based display might have that cost.

Maybe you are looking for

  • CN41N and S_ALR_87013533 report not showing Production order planned cost

    Hi Experts, I am having issue to get total planned production order values in my CN41N or S_ALR_87013533 cost report. I am facing 2 issues : 1. CN41N repoet does not show individual material cost planned in BOM. 2. CN41N report and S_ALR87013533 repo

  • Why are certain characters invalid in SharePoint file names/folders?

    Hello. I know which characters are not accepted in file names, but someone asked me today why that was and I was stumped! Does anyone know?

  • My iphoto keeps freezing everytime I open it.

    What do I do? Is there a way to rei nstall Iphoto without losing everything?  Everytime I try to even open I photo it does not respond and I need to force quit Iphoto to do anything on my computer. help!

  • Capturing JButton event in a JList

    All, I have a JList that renders each list item with some special formatting of a JLabel and a Jbutton. The button is an 'OK' button that must be acknowledged. When the OK button is acknowledged it should be deleted from the list model. I am having t

  • How to get sliced image into my table ?

    hi all :) i have created a sliced image of my country and added rollover with disjointed fx. i have also exported the code which works fine by it self. however when i try to get the code into a table cell on my website it breaks the table. so please