Nokia belle stop downloading after some time

nokia belle stop downloading after some time

@makuffu15
Is this via SW > updates upon device or via Nokia Suite upon PC?
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

GPRS services suddenly stop working after some time abt 4 hrs.Airplane on off solves it

I am using a factory unlocked iPhone 4 GSM in India. Iam currently using it on airtel network 2G services i.e GPRS services. Now the problem I have noticed is that the GPRS services suddenly stop working after some time say about 4 hours. Then what i do is to turn airplane mode on and then off or restart the phone and GPRS starts working. Agan after some time I have to repeat this exercise. Please help soon. This is happening since the time i bought this phone i.e from past 20 days. I have tried allpossible network settings and resetting network but nothing helped. everything else is working perfect.

Hi Syed,
I have also started facing the exact same problem since the past few months with my docomo service.
Earlier, EDGE / GPRS used to work just fine from my workplace where the network was good.
But recently, I got my iphone replaced, due to a network problem, from an apple store in indianapolis, and also upgraded to ios 5.....so not sure now whether this intermittent EDGE / GPRS outage is due to the new hardware or the new OS.
Did you upgrade to iOS 5 and did it help?
PS: iOS 5.0.1 also doesn't seem to be helping, I still need to restart the phone to get EDGE / GPRSt to work.....will try out the airplane mode thing....at least that shouldn't take as much time as a full reboot.
Regards,
Hemant

Multitouch Gestures Stop working after some time in Mountain Lion

I have a problem with Multitouch Gestures on Macbook Pro, using Mountain Lion. After some time 3 thinger swipe to left/right stops working. The only thing that helps to solve this problem is making a restart. Are there any other ways to get rid of this problem?

Me too. My iMac and MBP same here. Having graphics glitches when playing games neither in Mac or Bootcamp with Windows. Sometimes screen even slashed into half and freezed. Wake up from sleep also have graphics issues, like I need to use the crusor to oaint out the grey login screen, if not, it will stay white. Slowly moving the crusor will paint back the grey background.

Web Proxy sessions stop working after some time (ISA 2006)

Hi guys,
we have been using ISA 2006 with Web Publishing Rule to provide access for mobile phone to corporate Exchange via ActiveSync for years. The issue occurred roughly one month ago.
After some period of time (usually it happens once or twice daily) ISA stops to accept connections from the mobile phones. There are no errors on client devices (they don't get new mails). In Sessions tab I see that only SecureNAT sessions from phones remain,
but no Web Proxy sessions any more. There are no errors in Event Viewer and I didn't find anything strange in diagnostic logs.
I've created one more Web Publishing Rule with the same Web listener as for ActiveSync rule for OWA. The intersting thing that ISA still allows access to OWA when issue occurs. Looks like the problem with Web Proxy filter.
After OS restart ISA starts working normally.
I have ISA 2006, sp1, version 5.0.5723.514 installed on VMWare VM with Windows 2003 SE sp2.
Do you have any ideas?

Hi,
Does this issue still exist? If so, you could try to collect logs from devices to find more information.
http://support.microsoft.com/kb/2461792
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Replication DS6.2 - DS5.2 stops working after some time

Hello!
After weeks of unsuccessfully trying to solve a replication problem, I hope that someone of this forum can give me a hint.
I have 2 masters DS5.2 and two masters DS6.2.
Replication is working fine for some days. E.g. last time the replication was working until 29.11.
But at some point the replication stops working and I get the following errors in the errors log:
[28/Nov/2007:10:51:16 +0100] - WARNING<10288> - Repl. Transport - conn=-1 op=-1 msgId=-1 - Replay of an already seen operation csn 474d3d84000002bd0000, s
equence number 1, ignoring it
[28/Nov/2007:12:48:09 +0100] - WARNING<10288> - Repl. Transport - conn=-1 op=-1 msgId=-1 - Replay of an already seen operation csn 474d58e9000002bd0000, s
equence number 1, ignoring it
[28/Nov/2007:19:06:55 +0100] - INFO: 29398 entries in the directory database.
[28/Nov/2007:19:06:55 +0100] - INFO: add:107, modify:0, modrdn:0, search:3651, delete:0, compare:0, bind:2763 since startup.
[29/Nov/2007:13:18:38 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - csnplCommit: can't find csn 474eb18e00001a360000
[29/Nov/2007:13:18:38 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - ruv_update_ruv: cannot commit csn 474eb18e00001a360000
[29/Nov/2007:13:18:38 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - replica_update_ruv: unable to update RUV for replica dc=hvb,d
c=de, csn = 474eb18e00001a360000
[29/Nov/2007:13:18:38 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
[29/Nov/2007:13:18:38 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
[29/Nov/2007:13:34:05 +0100] - WARNING<20805> - Backend Database - conn=328186 op=1 msgId=2 - search is not indexed base='ou=people,dc=hvb,dc=de' filter='(
objectClass=*)' scope='sub'
[29/Nov/2007:13:58:10 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
[29/Nov/2007:13:58:10 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
[29/Nov/2007:15:45:46 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
[29/Nov/2007:15:46:03 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - csnplCommit: can't find csn 474ed41b00001a9a0000
[29/Nov/2007:15:46:03 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - ruv_update_ruv: cannot commit csn 474ed41b00001a9a0000
[29/Nov/2007:15:46:03 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - replica_update_ruv: unable to update RUV for replica dc=hvb,d
c=de, csn = 474ed41b00001a9a0000
[29/Nov/2007:15:46:03 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
Since the replication was not working I had to initialize the DS6 masters again:
[29/Nov/2007:16:03:59 +0100] - import hvb: Index buffering enabled with bucket size 76
[29/Nov/2007:16:03:59 +0100] - import hvb: Beginning import job...
[29/Nov/2007:16:04:20 +0100] - import hvb: Processed 14166 entries -- average rate 674.3/sec, recent rate 674.2/sec, hit ratio 0%
[29/Nov/2007:16:04:41 +0100] - import hvb: Processed 22598 entries -- average rate 525.5/sec, recent rate 525.5/sec, hit ratio 100%
[29/Nov/2007:16:05:03 +0100] - import hvb: Processed 31591 entries -- average rate 493.6/sec, recent rate 405.4/sec, hit ratio 100%
[29/Nov/2007:16:05:05 +0100] - import hvb: Workers finished; cleaning up...
[29/Nov/2007:16:05:17 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - Replica (dc=hvb,dc=de) has been initialized by total protocol
as full replica
[29/Nov/2007:16:06:56 +0100] - WARNING<20805> - Backend Database - conn=334334 op=1 msgId=2 - search is not indexed base='ou=people,dc=hvb,dc=de' filter='(
objectClass=*)' scope='sub'
[29/Nov/2007:16:07:42 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - csnplCommit: can't find csn 474ed92e00001a360000
[29/Nov/2007:16:07:42 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - ruv_update_ruv: cannot commit csn 474ed92e00001a360000
[29/Nov/2007:16:07:42 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - replica_update_ruv: unable to update RUV for replica dc=hvb,d
c=de, csn = 474ed92e00001a360000
I tried to change a password. But the replication failed again and since than the replication is working again.
[29/Nov/2007:16:07:42 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
[29/Nov/2007:16:07:42 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
vereinsbank.de:636]
But I'm sure that after some days there will be a problem again.
Sometime there are also the errors:
[29/Nov/2007:16:27:05 +0100] - ERROR<8264> - Replication - conn=-1 op=-1 msgId=-1 - Internal error Failed to position cursor in db at C
SN 474ed8d5000002590000, DB error 5 - I/O error
[29/Nov/2007:16:27:05 +0100] - WARNING<10258> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Changelog error A database error is encou
ntered while servicing replication agreement "dsmmucqsu08.sys.hypovereinsbank.de:10636/dc=hvb,dc=de"
[29/Nov/2007:16:27:05 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [d
smmucqsu08.sys.hypovereinsbank.de:10636]
[29/Nov/2007:16:27:05 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [d
smmucqsu08.sys.hypovereinsbank.de:10636]
[29/Nov/2007:16:27:06 +0100] - ERROR<8264> - Replication - conn=-1 op=-1 msgId=-1 - Internal error Failed to position cursor in db at C
SN 474ed8d5000002590000, DB error 5 - I/O error
[29/Nov/2007:16:27:06 +0100] - WARNING<10258> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Changelog error A database error is encou
ntered while servicing replication agreement "dsmmucqsu08.sys.hypovereinsbank.de:10636/dc=hvb,dc=de"
[29/Nov/2007:16:27:06 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [d
smmucqsu08.sys.hypovereinsbank.de:10636]
I tried to reproduce the problem.
At the moment everything works fine and I can do many changes.
But I know that there is somewhere a problem and the replication will stop working again in the next days.
Can you give any advise?
Regards,
Beate
Edited by: 72716 on Nov 30, 2007 10:05 AM

Here is an explanation of the failure:
1. Prioritized replication was introduced with DS6.0;
2. When a suffix at a DS6 instance is initialized from a DS5 instance, and then an operation is performed at the DS6 instance that uses prioritized replication, replication fails;
3. By default, password policy uses prioritized replication to propagate auth-failure-lockout state updates (e.g., adding a pwdFailureTime attribute value on a failed bind attempt);
A work-around:
Disable DS6 supplying auth-failure lockout state using prioritized replication. In any password policy having auth-failure-lockout enabled, set
pwdIsLockoutPrioritized:FALSE
Note that DS6 enables prioritized lockout by default, in particular, it enables this feature when migrating a password policy received from a DS5 instance. Hence, for this workaround to be effective, the prioritized lockout feature must be disabled in any DS6 password policy that has auth-failure lockout enabled, which could include:
1. The default password policy at any DS6 instance (cn=password policy,cn=config);
2. Any password policy originating at a DS5 instance, including those in data imported into a DS6 instance, received via replication total update initialization, or added at the DS5 instance subsequent to the DS6 instance initialization;
3. Any password policy added to a DS6 instance.
Additionally, do not set any prioritized replication rules for other attributes.
It is possible the bug can still be triggered in the case of a DS6-only topology that was initialized from DS5 data.
Contact Sun support for the status of a fix for the bug. The CR is 6645742.

Internet stop working after some time on line ....?

Hey all ....!!
I have a bit of a problem, i live in South Africa, and have wireless internet, with a desktop modem connected to my iMac using a ethernet cable, and using the network settings in system preferences.
I have been using this setup for some time now and have had no problems, till a few days a go i did a apple update, where there was a security update and i downloaded it and installed it and all is good then a few days after that i was on MSN chatting to a friend and the after maybe 30mins or so the net gave me a strange error saying that the remote computer as terminated the connection, after witch i reconnect with no problems, then maybe 30mins later it dose it again.......
I then had a look at my settings and i found a option that you tick...... Disconnect if idle for 30 mins but it is not on... i turned if off long time ago ... then i thought maybe it was msn... so i quit msn and played on the net for some time it did it again and again and again.
I am getting a little bit upset with it ...... i have phoned the company that host my internet but the is not problem with the service and if i tell the help desk there about the problem and tell them i have a iMac they think i am talking about a burger... sorry not a nice to say but not many people that work there know what a iMac is ...!!!!
please please can someone help me in anyway at all.... please ....?
thank you.
iMac, 1.8Ghz Intel Core 2 Duo, 512mb, 160Gb Mac OS X (10.4.10)

I have the exact same problem... please there must be
someone there at Apple that knows something about
this... what can we do??? Wait for Leopard... ?
OK so I tried to fix the problem myself....... I unplugged the modem and retyped all me settings again..... plugged back in and then tried again it looks like i might have worked..... you should try that...... i also phoned the iStore, Someone told me that i must go to my disk utilities and do something there but that got me a bit worried..... I don’t know iMac's all that well yet and don’t want to play with something i know nothing about........ but if that dose not work then i will phone her again and post what she tells me to do ...!!!

Hi, my name is Amit, my hot corners stop working after some time. Have to go to mission control to reset them, however they stop again after some time. This is annoying. Can someone please assist to solve this problem? Thanks Amit.

Hi my name is Amit, after upgrading to OS X Maverick I often have problem of my Hot corners stop working after a short period of time. I have to go to mission control and have to reset them for them to start working again. However this is temparory and they stop working again and this is quite annoying. Can someone suggest a cure to this problem please. I will be grateful. Thanks Amit.

Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Preferences/com.apple.dock.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Desktop, leaving the window open. Log out or restart the computer and test. If there's no change, put the item you moved back where it was, overwriting the one that may have been created in its place. Log out again. Otherwise, delete the item you moved.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Webpages stop loading after some time across all browsers

I have come across a problem that 2 of the users that I support have been experiencing recently and I am trying to figure out where to begin. They will be able to use the internet, access webpages and everything for some time till at one point seemingly randomly all web browser connectivity becomes stuck at the dialog Connecting and eventually times out trying to connect to the host server. Yet other forms of internet access, like ping and telnet, work just fine at this point. Basically it seems that all traffic going to ports 80 and 8080 times out and I have pulled the logs where I believe this happened and pasted them here:
http://pastebin.com/VPSPwyBe
A temporary fix for this so far is a quick reboot and everything behaves normally for sometime till web access drops and another reboot is required. This is true across all browsers, IE, Firefox, and Chrome on a MacBook Pro Retina 15" running OSX 10.9.4. I have tried fresh installs of all the browsers and switching to a different OS X user account and still have the same problem. I have also tried to flush the DNS using the terminal and that has had no effect. There are no proxies involved and resetting the wireless adapter produces no results. Going to keep searching for some other steps to try to fix this and will keep this thread updated.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

On Windows 8, some widgets, such as the menu button near the upper right, stop working after some time, and functionality is restored by rebooting the PC.

I use the latest releases of Firefox as they become available on a Windows 8 PC. Firefox works properly, usually for a few hours, before annoying problems manifest. The problem I'm addressing here is some widgets, including some Firefox widgets and isolated widgets (such as buttons and pull-down selectors) in some websites stop working. In Firefox, the Menu button (the three stacked dashes icon) stops working. And the Download arrow sometimes stops working also. Sometimes, sub-items such as Print stop working. For some pull-downs, the up and down arrow keys might still work even though I might now be able to select with the mouse. Closing and reopening Firefox usually restores some functionality. However, I usually have to reboot the PC to restore all functions which stopped working. Then I am good for usually a few hours again. Another annoyance, which others have addressed, is the eventual appearance of Chinese-looking characters on the tab labels bar across the top. Restarting Firefox gets rid of these for the time being. Thanks for investigating.

hello, maybe that's an issue with hardware acceleration - please try [[Upgrade your graphics drivers to use hardware acceleration and WebGL|updating your graphics driver]], or in case this doesn't solve the issue or there is no new version available at the moment, disable hardware acceleration in the firefox ''menu ≡ > options > advanced > general'' (that setting will take a restart of the browser to take effect).
the oriental characters are a displaying flaw caused by the mcafee site advisor extension - please try to disable or remove that in case you have it present until there is an update by mcafee that can fix the problem.
http://service.mcafee.com/faqdocument.aspx?id=TS100162
https://community.mcafee.com/thread/76071

Entity Beans stop working after some time

hi,
I am facing this strange problem. I am devloping a Learning Management System. Once I deploy the app it works profectly fine. It calls all the session and ejb beans perfectly.
I am using the sun one 7 PE and J2EE 1.3. After the product has been deployed for a couple of hours, and i re run the application, it gives a null pointer exception. The session bean cannot connect to the entity bean.
I am using mysql as db and have a pool defined.
Is there a connection time-out problem or some problem with the entity bean, because the session beans work fine even days after deployment, but entity bean stop functioning in a couple of hours.
Some help needed !

Have you looked at the server.log to see if you have any other clues to the point of failure?

Why does ServerSocket stop working after some time?

Hi to all.
I have a following problem:
I wrote a multithread application that uses sockets ( TCP ), and use it to transfer some objects between computers in VPN.
It all works just fine, except that sometimes my server socket ( implemented as a separate Thread ) just stops working, and other computers cannot connect to it...?
I didn't specify setSOTimeout(), and did all Exception catch-ing in the thread.
Today, I had some >50000 connections in about 5 hours, and than it just stopped! My server socket stopped accepting any connections...
I restarted my application, and everything worked again properly...
Does anybody know why is this happening?
Please, any suggestion is appreciated....
Thank you.

Hi, thank you all for answering me.
@baftos:
I didn't specify any backlog parameter value. 50 connections at a time seems more than enough for this application... ( Are you sure that 50 is the default value )
I never have more than about 40 connections simultaneously opened, and yes - each one is a separate thread.
@dannyyates:
You're rights, I should have provided some code.
Here it is:
public class Server implements Runnable
ServerSocket serversocket = null;
Socket clientSocket = null;
continueWorking boolean = true;
    public void run()
            startServer();
    public void startServer()
        try
             serversocket = new ServerSocket(3344);
        catch (IOException e)
             System.out.println(e.getMessage());
     while ( continueWorking==true )
         try
              clientSocket = serversocket.accept();
              Worker Worker = new Worker(clientSocket);
              new Thread(Worker).start();
         catch (IOException e)
              System.out.println(e.getMessage());
        System.out.println("The server is shutting down...");
class Worker implements Runnable
    ObjectInputStream obj;
    Socket clientSocket;
    public Worker(Socket clientSocket)
         this.clientSocket = clientSocket;
        try
          obj = new ObjectInputStream(clientSocket.getInputStream());
         catch (IOException e)
              System.out.println(e.getMessage());
    public void run()
        Object object;
     try {
                      try
                           object=(Object)obj.readObject();
                                               // do something with object....
                      catch (ClassNotFoundException e)
                           System.out.println(e.getMessage());
                    catch (Exception e)
            obj.close();
            clientSocket.close();
     catch (IOException e)
    catch (Exception e)
    }What I don't like here is the constructor of the Worker. Could this block the server?
Edited by: Darko on Apr 7, 2009 11:24 PM

Expose keys stop working after some time

Hi,
I am experience some failure of my Exposé keys after a certain amount of time without rebooting the system. (~2 hours+). Usually you can show the Desktop by pressing F11, show all application windows with F10 and so on. After the system booted everything works like I would expect it, but then the keys doesn't react anymore.
F11 seems to send the command to the foreground application, instead to the OS which causes fullscreen presentation for the firefox browser.
I can fix the issue temporarily by restarting the dock, however after a hour the problem reappears. That is very annoying and frustrating.
What can I do?

Have you looked at the server.log to see if you have any other clues to the point of failure?

Collaberation Suite Stops Responding after some time

I have been testing collaberation suite on linux and have everthing working to 100%, but it seems that after a day or so of running it stops working. The listeners stop and I cannot access any of the services until I restart them. The configuration is:
Dual Intel 1.7 gighrtz Xeon Pentiums with 2 Gig of ram. Could it be I need more ram?
I don't have, but 3 users just for testing so it's not highly demanded upon.
Thanks for you Help,

Hi,
What O/S are you using, and what version of the kernel?
Thanks and Best Regards
Lynne

TS1702 ios 6 not updated in my new i pad, when i tried to update my i pad after some time a error massage shown and download stoped, same thing happen in i tune , i talked to apple customer care india , aftre talked them i disable my window firewall , and

dear all i have facing promblem when i download ios 6 in itune, as well as in ipad, when i start download after some time or after 200 to 300mb it stop, and a error msg shown , i have talked to apple india cutomer care and after that i disabled my window firewall, and as well as my antivirius and i also disabled my modem firewall but after that still i m unable to update my new ipad with ios 6

There is nothing in that other thread that clarifies what you did about Error 3014
Here is the description of that error:
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

SAP instance getting stop after some time....

Hi,
Installed SAP on Cluster .SAP runs fine before and after switchover cluster when we do manually.
Problems comes after scripting ,While starting SAP Instance with SCript its work fine but after some time instance get fail.
And error comes
15:09:55
/usr/sap/SID/SCS01/exe/sapcontrol -prot NI_HTTP -nr 01 -function Stop
05.03.2014 15:09:55
Stop
OK
15:09:57
Instance on host insapr3pi01 stopped
15:09:57
Waiting for cleanup of resources
And it stop instance after some time.We are using Veritas (VCS cluster).Its continously search for cleanup of resources!!!!!!!
Regards
Adil

Sap instance start by that script but after sometime it give message in cluster software that Waiting for Cleaning of Resources.And after sometime it shutdown that instance.
Hi Adil,
When an external application (in this case SAP NetWeaver) is clustered with VCS, there are options to execute scripts at various operation cycles of the VCS agent for the application in question. I would recommend reviewing the application group configuration, corresponding VCS logs, as well as the path to the scripts and their content.
I can assist from VCS perspective if the question still stands.
Regards,
Villi

Nokia belle stop downloading after some time

Similar Messages

Maybe you are looking for