Nokia Belle upgrade on Nokia X7 - Security Code er...

I have just upgraded to Belle software but now there is an annoying thing were I keep getting asked for a security code (which I hadn't used previously) on boot up, if you put the default code in it fails(12345,00000), but if you cancel you can still operate the phone normally.
Very odd...Anyone have any fixes for this?
thanx in advance!

skyee wrote:
Hi all,
here's our official Q&A on this.
Q: After the update to Nokia Belle, my phone asks me to enter new security code. I do this and get an error message stating “code error”. What should I do?
A: Please try again a few times. There are very rare cases in which the phone incorrectly asks for new a security code but does not accept the entered code.  In that situation the problem vanishes by entering any code until the phone stops asking for it.  After this, the code you had entered before the update works again normally.
Br,
yvonne
my E7-00 is asking for a security code in start up, not for a new security code , can i treat it the same ? knowing that i was using a different code than the default before the update.
please advice.
Haikal

Similar Messages

  • How downgrade nokia belle to Anna Nokia E6-00 ?

    how downgrade nokia belle to Anna Nokia E6-00 via NSU Nokia or Nokia Suite ?
    Please tell me about this...
    Thanks very much nokia & friend
    Solved!
    Go to Solution.

    Hi obedoke,
    Thanks for posting and welcome to the forum.
    Please use the forum search function before you post a question. Many times your questions was asked (and assured) before and so you will have your answer straight away. See the forum guidelines if you have any questions on posting.
    As to your question. It is not possible to go back to Nokia Anna once a device has been upgraded to Nokia Belle. If you have any specific questions, again try searching for them and if you can't find the answer feel free to post them here.
    Hope this helps,
    Kosh
    Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

  • Nokia N8 cannot get rid of "security code" after u...

    Please help me I am tearing my hair out trying to fix this!
    I have a Nokia N8 (sim lock to Vodafone)
    I have NEVER used a security code or set one on it.
    I upgraded to Belle and ever since then it asks me for "Security Code"
    I can enter ANY code including 1234  0000  12345 and anything else it always tells me CODE ERROR but then it lets me use the phone like normal.
    I can NOT do a factory reset from the menu as it asks me for code
    I CAN flash/downgrade it to scandinavian 11.5 firmware but that doesn't make the code request go away
    I downgraded it - still code request!
    I upgraded it back to Belle again using Nokia Suite - still code request!
    I can put it into TEST MODE but then can not get it to do full factory reset, which I am told might fix the issue.
    Please can someone tell me STEP BY STEP what I need to do to get rid of this annoying code request when I power the phone on
    I DID try hard reset power + camera + volume down + menu button this made other problems with apps and licence but did NOT fix the problem - luckily I managed to reflash to Belle and got my apps/licences back but still code problem
    Help please!

    check here.
    http://www.knowyourcell.com/nokia/nokia-n8/n8-guides/572758/how_to_secure_your_nokia_n8_with_a_passc...
    Disable by: Settings - Phone -Phone Management-Security Settings-Phone and SIM Card: click NONE from the choices of (Phone Autolock period). This will disable the LOCK from setting itself. Keep the code you originally created handy as you will need it should you ever decide to reactivate the lock system.
    I found this information by searching for an hour, after reading numerous posts about Resetting, etc. Useless information since what we both wanted to do was turn the damn lock system off.
    Hope you can use this info. BTW... does your main camera work? Mine does not, and the phone also fails in cold weather by shutting itself off. ugh

  • No Nokia Belle update for Nokia X7 059K1B7 in any ...

    Its like the support team forgot the Nokia X7 059K1B7 i,ve fetched all of the countries and found nothing related to this software im thinking of changing the software. In addition to that there is no update for any of the X7 series in Lebanon so any help please?
    Thanks in advance

    A quick search of the forum finds this thread /t5/Xseries/Nokia-X7-Product-Code-059k1b7/m-p/1338​067/highlight/true#M15547 which identifies this as a France variant, and it seems that there is currently no belle update planned. Keep an eye on, http://europe.nokia.com/find-products/nokia-belle-​update/nokia-belle-update-availability looking under France to see if the status changes.
    N8-00 pc059C9F6 Belle
    808 PureView pc059P6W5

  • Lost all data with Nokia Belle upgrade!!!

    Hi
    After upgrading to Noka Belle everything went fine, but today when i tried to switch off my Nokia N8 by pressing the power off buttong, "Switch Off Phone" option was not available on the screen, it showed only Lock Phone, profiles etc. when i tried by long press the mobile got switched off. but when i powered it on... there was no data like my whole pictures, videos, contacts, messages all got erased. i did restored the same from my backup, but whenever i swtich off and on all the data is getting erased. this is very strange... how to over come this probelm? is there any way i can reinstall sybian anna again?... please help.
    Regards
    Ganesh
    Solved!
    Go to Solution.

    You could try a factory reset (which will delete ALL data on the phone and restore it to 'factory' conditions).
    Settings - Phone - Phone Management - Factory Settings - Delete Data and Restore.
    Try this first off. Re-sync your data and turn the phone off and on again.
    If the problem persists, perform a factory reset and then re-install the firmware.
    If you go to the 'software update' menu, you will be shown the firmware version that you are running. You will also be given the option to re-install the Belle firmware.
    Re-install the firmware, then re-sync your phone. Turn your phone off and see if the problem persists, hopefully this will sort it out. If not take it to a Nokia Care Point and see if they can identify the problem.
    You will not be able to reinstall Anna without reflashing your phone, however this will likely void any warranty and cannot be discussed on this forum.
    The NCC may be able to reinstall the Anna firmware for you, however try what I have suggested above as you may have a corrupted firmware and re-installation may cure the problem.
    Hope this helps.

  • Nokia 500 security code

    when i switch on my nokia 500, it always ask the security code. so, please give me steps to off this setting.i want that mobile should not ask the code while switching on.

    Please take following steps & you will get solution
    1# go to menu> tools > settings > general > security > phone & SIM card
    2 # now set ''PIN code request'' as ''off''
    3# set '' phone auto lock period '' as ''none''
    4 # set '' allow remote lock'' as ''no''
    # If this is helpful, please click on ''accept as solution'' & add ''kudos'' i.e. Blue Star.
    Thanks for reading Happy to help.
    Using Nokia E63-1 (308.07)
    510.21.010 (28-03-2011)
    RM-437 [S60v3 FP1]

  • Forgotten Nokia C3 Security code Help me!

    Hi,
    I've a Nokia C3 I've changed my security code and forgot Please who it will open?

    Are you refering to your sim pin or the phones security code? 3 wrong attempts with the sim pin will require the PUK code to unlock. PUK is available from your service provider. Th unlock code , on the other hand should only be reset by a Nokia Care Point. They will probably require proof of purchase before doing so for you.

  • Rest security code for nokia 2630

    HI Team,
    I'm using nokia 2630 mobile, I forgot my security code and try to reset factory settings"*#7780#" but it’s showing code error......
    I generated Master code: 7511450750 but its showing code error......
    Can u guide me and help me to reset my security code.....
    My mail ID: ****
    Thanks in advance....... 
    Moderator's Note: Personal details removed. We kindly ask you not to share your phone number publicly on this forum.

    Take your phone to your nearest Nokia authorized service/repair center, and they should be able to reset the phone and the security code along with that.
    Find a repair center through the "Contact us" link at the upper right hand side of this page.

  • Nokia Belle Refresh N8--Colorize IT

    I am from India I have N8 (Product code--0599255) and I cannot find Colorize IT on my phone after update.Please anyone help me to find it where it is located in the phone.Please also tell me if anyone got this Colorize IT on there phone after the update...
    Solved!
    Go to Solution.

    Hi all,
    I have updated my N8-00 from Nokia Belle to Nokia Belle Refresh via Nokia Suite and the file was 306MB in size and after the update I did not get Microsoft Apps but received Nokia Maps though I had Nokia Maps Suite 2.0 installed before the Nokia Belle Refresh update and also I did not get the Colorize IT application also and I heard that Social was also updated to version1.5.234 but mine is still at 1.5.216.
    Overall, my Nokia N8-00 has become more stable and performance in speed has increased with this update. I am from Kenya and received Nokia Belle Refresh shortly after Skyee announced that it is being rolled out on 27th August 2012.
    Can anyone from Nokia or who has installed Nokia Belle Refresh confirm if Social was updated to version 1.5.234 or is it still at version 1.5.216 and also if Microsoft Apps were included in the Nokia Belle Refresh update after installation via Nokia Suite. Here is the Official Changelog from Nokia.
    Thanks.
    Ngwangwa - Six Million Ways To Die Choose One

  • Nokia Belle can be installed on Nokia N96

    i want to know can i install nokia symbian belle operating system on my N96 with Nokia suit or not 
    thanks and regards 

    Hi sulemanakbar,
    Thank you for your first post and welcome to the Nokia discussion forum.
    Just to confirm the Nokia Belle update is only available for Symbian ^3 devices. You can check a the full list on the link below:
    http://europe.nokia.com/find-products/nokia-belle-update
    If you scroll to the bottom of the screen you can see the full list of devices the Nokia Belle upgrade is available for.
    To check your device latest software please refer to the link below:
    http://europe.nokia.com/support/product-support/device-software-update
    Hope this helps.
    Regards
    Raoul_Duke
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • Nokia Belle Refresh update just launched

    *NOTE: Please read this post before making a reply. At this time there is no information on when which product codes are made available so please do not post such requests and keep this thread clean and easy to follow. We will make sure to let you know of any additional information as it becomes available.
    Hi all,
    great news! We just started to roll out our next update for Symbian called Nokia Belle Refresh for Nokia N8, Nokia E7, Nokia C7, Nokia C6-01, Nokia X7 and Nokia Oro with version number 111.040.1511 (Nokia E6, version number 111.140.0058, will follow still this week, Nokia 500 updates will follow shortly).
    This update again brings new features to Symbian smartphones, for example:
    -          a new browser with HTML5 web apps support, a new set of homescreen widgets, and the previously released Microsoft Office Mobile App and Nokia Maps Suite 2.0 in one package.
    -          Nokia N8 will have some extra apps for imaging
    The update will be rolled out in phases, starting with the vanilla versions (ie. basic software variants without any specific operator or country configuration). Country and operator variants will follow within the next weeks, depending on local and operator approvals.
    pS: Just like after updating from Nokia Anna to Nokia Belle, some apps may not work due to compatibility issues. If you need more information on available apps, please contact your local Nokia Care support. Furthermore, you can also contact the respective App developer to enquire about the compatibility.
    Best regards,
    Yvonne from Nokia Care

    Someone please tell me what's happening.
    I have launched Nokia Suite and a screen about the new Nokia Belle update was available, so I connected my C6-01 via USB cable and started the update process.
    After some minutes the device restarted and Nokia Suite informed me about the successful update to v111.40.1511 .
    Then I checked in "Device Management" in my C6-01 and discovered with extreme horror that the version in my phone is still the v111.030.0609 .
    Now I have to reinstall 46 applications, deleted by the update process. I'm very disappointed for this and wondering why Nokia Suite did informed me about a wrong update.
    Sorry for my poor english.

  • Nokia Belle roll-out has started - check here for ...

    Hi all,
    good news to share! We are very happy to announce that Nokia Belle is now available for download for Nokia N8, Nokia E7, Nokia E6, Nokia X7, Nokia C6-01, Nokia C7 and Nokia Oro in the majority of our markets, for example: India, Russia, United Arab Emirates, Turkey, Poland, UK, Germany, Italy, Vietnam and Indonesia. For Nokia 500, Nokia Belle will be made available within the next few weeks.
    You can find,
    - an overview about what Nokia Belle is all about via http://europe.nokia.com/nokia-belle-update
    - the availability of Nokia Belle for your country via http://europe.nokia.com/nokia-belle-update-availability
    - and all the latest FAQs via http://europe.nokia.com/nokia-belle-update-faq
    Also check our story with more details about Nokia Belle in Nokia Conversations.
    To update your phone, you'll need to connect it to a PC via a USB cable and then start Nokia Suite (make sure you have the latest version 3.3.86 installed) – as Nokia Belle is a major upgrade, it is not possible to update over the air / OTA and the update also won’t be available in Nokia Software Updater. For a step-by-step guide,  you can check the Nokia support pages and we have also done a video that tells you everything you need to know. Please note that the update to Nokia Belle removes your apps & music licenses, but you can re-download compatible apps easily via Nokia Store and your music licenses can be restored by playing the respective track. (We’ve done more detailed explanations in the FAQ pages, so check here for more infos.)
    If you get a notification on your phone that the Nokia Belle update is available for you and it doesn’t show in Nokia Suite, please make sure that you have the latest Nokia Suite version 3.3.86 installed and then use the refresh button there.
    pS: And last but not least, I also want to use the opportunity to introduce Suvi aka Kerttu, who will keep you up to date with news about software updates in the future. Welcome to the Forum, Suvi!
    BR,
    yvonne

    Also, this 'country availability' page is SUPERB!    Thanks again
    http://europe.nokia.com/nokia-belle-update-availability
    Nokias: 232, 3210, 3330, 6230, 6101, 6021, 6126, E75, E73, N900, N8, E6, E7, N9. There's a Samsung in there somewhere too, but...we don't talk about that.

  • Update on Nokia Belle for Israel

    Hi all,
    I quickly wanted to share with you the following statement that I got from our local team about the Nokia Belle availability for Israel:
    The roll-out of Nokia Belle for existing Nokia Symbian^3 phones started globally on February 7, 2012. Testing and approval of Nokia Belle as per the Israeli operators’ requirements is still in process. Subject to successful completion of such tests and approvals, we will announce the launch in Israel and the process for updating via Nokia Discussions Forum as soon as the software is available.

    Hallo Skyee!
    Can u pls update abt Belle for Israel? I checked my sisters N8 a week ago and still had no Belle for it.

  • Nokia Belle FP2 (Lite) or Nokia Belle (refresh 2) ...

    will the FP2 also available on older S^3 devices? INCLUDING NOKIA 500!!!!!? bcoz im ithcing with that new feature called swipe unlock
    Nokia user since 2004.
    Owned 3310, 1100, 3300, 6600, 6300, 5310, 5130, N79, 5800.
    Owns: 6230 (still alive) and 500....

    The Nokia Belle Refresh was just released about a week ago or so. So, even if there is indeed Nokia Belle FP2 Refresh or whatsoever for these phones, it might take (Probably) months for it to released. In anyhow, we will never know when will it released or even if there IS Nokia Belle FP2 for Nokia 500 or older.
    If I have helped you in any way, give me a kudos!

  • Nokia Belle FP2

    Anyone has an idea on an expected release date for the Nokia Belle FP2 For Nokia 701 . Nokia Adminstrators Please Give A Clue As It Is Going To October And I Expected It On September 10. Please Comment On This !
    Solved!
    Go to Solution.

    At this time no information is available as to if and/or when such update will be available and as the guidelines for Nokia Support Discussion state speculation of this nature is not allowed;
    Nokia does not comment on rumours or speculation concerning anything not officially announced by the company, and as such discussion of such matters on this forum is also not permitted.
    Thanks for your co-operation on this.
    Kosh
    Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

Maybe you are looking for

  • NPE occurs when deploying suitecase dependent on WSIF / EJB

    I am getting a NullPointerException when deploying a BPEL process that depends on an EJB accessed via a WSIF definition. Both the ejb and the suitcase are deployed onto the same oc4j instance, and i have tested the ejb from a standalone client to ens

  • Forms6i

    Dear friends, please Answer my question as early as possible(immediately) 1) How to debug in forms6i using tool debug menu. 2) Is it possible to open worddocument in forms6i using editor object.Rather than opening an notepad (if it is system_editor)

  • How do I screen capture just one element of my computer?

    I know there is a keyboard shortcut for it (Hold Command, Shift, and 4 keys, then press the Spacebar), but it doesn't work for me. Additionally, I can't find an option to adjust it in my Keyboard settings in my System Preferences. How can I turn this

  • Ipod-itunes synch

    Whenever I plug my ipod into my mac it tells me there is an error #13014 and that my ipod cannot be synched. I'm not sure why this happens, it just happened out of the blue one day. I've always ejected my ipod before removing it and I just bought my

  • Dropdown - Adobe Form

    Hi All, I have a dropdown in my form. Based on the value selected, i need to populate another dropdown in the same form. Can any help me out with this. Thanks and Regards Manish Mohan