NOKIA BH-111 : Increase volume using volume wheel ...

Hello,
My name is Sonus Sundar, Last month I bought Nokia BH-111 bluetooth headset. After using it for a month, Now I am not able to increase the volume of the device with the volume wheel.
I increased the volume in phone to its extent. But when I hear it from the blutooth it is twice as low as I connect the headphone directly to the phone using the headphone jack.
But there is no other issue in connecting the device or charging it.

Okay, have this little sucker so I'll answer it for myself. RDS doesnt seem to have support for radio text, it only displays names of radio stations, btw. FM reception seems to be very good.
No problems with Nokia N80. Can even stream music from phone to the headset in stereo mode, but the quality isnt very good, apparently because of bluetooth 1.1 spec of the phone.
Havent tried much FM radio recording, but after starting recording software phone makes active connection with the headset which stops to play radio and switches to "voice" mode.
Pairing after turning on the unit takes only few seconds.

Similar Messages

The mark of increasing volume doesn't appear when i use the back light key

the mark of increasing volume doesn't appear when i use the back light key

Hi,
Please write your notebook product number (p/n), which system are you using and country of purchase.
Resource:
How to Locate the Notebook product number (p/n)
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Using volume wheel

I have a volume wheel on my laptop and an trying to configure the system to use it to change the volume. I use ratpoison as a GUI, does anyone know how to bind the volume wheel?

Why can't you use xev in ratpoison?
Anyways, I messed up in my previous post, the configuration should be:
definekey top XF86AudioLowerVolume exec amixer -q set Master 1- unmute
definekey top XF86AudioRaiseVolume exec amixer -q set Master 1+ unmute
See the wiki if this still doesn't work: http://wiki.archlinux.org/index.php/Extra_Keyboard_Keys.
Last edited by Stebalien (2010-10-18 21:32:22)

Volume Wheel Fault/Issues Anyone?

I'm a proud UK new owner of an ipad (64GB wifi+3G), which like most of us, I find astonishing and already fell in love with it after just ten minutes use.
But I have one small problem: I cannot get the volume wheel on the side of the device to work properly.
No matter what way i turn it, up or down, it always turn the volume UP!
Pressing it inwards appears sometimes to mute the volume, but the only way i can reduce the volume down is to go into either the on screen volume (if I'm using the ipod or Video apps) or into the Sounds setting in the Settings app if I am running an app with built in sound which has no volume adjuster built into it.
Am i doing something wrong,or has anyone else experienced this problem?
And ideas or suggestions please?
Thanks

Drusus wrote:
Am i doing something wrong,or has anyone else experienced this problem?
If you are pressing the top of the volume rocker (not a wheel) to increase volume and the bottom to decrease volume then you are not doing anything wrong.
If you are trying to spin it like a wheel, then yes. That is wrong.

I cannot increase volume on Voice Memo

Does anyone know how to increase volume on Voice Memo?
I almost do not hear my messages (unless I shout or put my phone in front of my lips and talk loud).

Just got a 3GS today and this volume problem was one of the first things I noticed. This has to be fixed - teling people they have to use a headset mic or somesuch, when the speakerphone usage of the built-in mic works just fine, is a cop-out. Obviously an oversight ("bug") in the code. Now if someone could just figure out what the file type of the voice memos is, one could take the files of 3rd party apps that do record at a proper volume and make iTunes recognize them as voice memos. If Apple's going to release something they consider a core iPhone app in this shoddy condition, it's only fair if we get some sort of functional workaround rather than wait for someone's bugfix inbox queue in Cupertino to get caught up on.

My Nokia lumia 620 top volume button got faulty, I...

My nokia lumia 620 top volume button somehow went inside the phone and I can't increase the volume, its stuck at 0! Is there any way on Windows Phone to increase the volume without the damn key? I need a solution because my warranty is in another town and I won't be there in a week.

I get the issue is annoying, but maybe you should look into getting some different shells. Besides making a fashion statement it'll fix a broken button in no time.. (well a few seconds that is).
Besides.. choice is always good.. As a Dutch national the colour for the next few days will be.. Orange..
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..
Attachments:
WP_20130417_003.jpg ‏159 KB

Can't increase volume from nano to beats ?

IiPod 7th gen to beats Bluetooth . Can't increase volume?

If you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod to a computer
The transfer of content from other sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
TuneJack Windows Only
iPod2PC Windows Only
iGadget Windows Only
iDump Windows Only
SharePod Windows Only
iRepo Mac and Windows
iPodRip Mac & Windows
YamiPod Mac and Windows
Music Rescue Mac & Windows
iPodCopy Mac and Windows
There is also a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows or a Mac. The procedure is a bit involved and won't recover playlists but if you're interested it's available at this link: Two-way Street: Moving Music Off the iPod
I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay.

[SOLVED][Toshiba Laptop] Volume Wheel never stops generating events

I have this volume wheel on my laptop which I like to use to control the volume of the audio on my laptop. However I run into a problem:
The Good => Using xev I verified that It does generate keypress and keyrelease events (two different ones for either up or down). I would still have to remap those to XF86VolumeLower and such...
The Bad => Once I turn the wheel I keep getting keypress/keyrelease events continously even after I've stopped turning it...
The Ugly = > this makes it completely not usable.
Anyone seen this problem before? I googled around, most people seemed to have a problem getting events from volume wheels...
Edit:
Sorry for editing such an old post. This got fixed in udev-159-1.
Last edited by GogglesGuy (2010-07-07 17:55:30)

I'm still having this issue running the latest kernel and xorg. Since the event seems to be reported by xorg, would this most likely be a xorg bug or misconfiguration (and such should I report it as a bug to xorg)?

Volume wheel on Toshiba Portege M700-S7005X doesn't work

I had to reinstall windows on my computer, and everything works perfect, except for the fact that my volume wheel no longer does anything. I have to adjust volume using the system slider. Anyone know how to get my wheel working again? Thanks!
-Daniel

Thanks for your answers so far.
@Xaver:
No I have win 7 clean install (instead of Vista), which is the reason I tried the workaround I linked to.
@nifer:
No yellow bangs in the device manager, and, even more important only one entry called something like "Toshiba virtual modem" under "modem" in the device managaer (I thinkthat the four entrys for the 3g moduldrivers should be under "modem" in the device manager)
- Is it possible to check this powerrail without having to disassemble the whole notebook? Where is the modul located?
@xardas: I think it has, at least the guy who sold me the (used) notebook said so. The model Number begins with ppm70e, which I believe is the specific model of m700. There also is a sticker with a "wireless WAN IMEI" and a number at the backside and a slot for the sim-card behind battery-pack, which both would be very suspicious for a notebook not having a 3G modul.

[SOLVED] Volume Wheel on Laptop Not Working

Hello everyone, installed arch for the first time a couple days ago and have pretty much everything setup to the way I like. However, I can't seem to find how to get my laptop's volume wheel to work. Sliding the wheel simply doesn't do anything.
I've looked around on the wikis and haven't been able to find anything.
Last edited by tazzerthespaz (2015-06-11 17:36:30)

I'm using openbox. Found a previouse forum post detailing how to find the correct key and then I stuck that in my rc.xml for openbox.
The forum post: https://bbs.archlinux.org/viewtopic.php?id=106820

G20 - Problems with volume wheel

My volume wheel isn't working as it should, when i'm trying to turn the volume down, it jumps up again. same when turning up, it's jumping down. To turn it up or down i have to turn and turn and turn before it moves. If I'm turning the sound up its like it's moving 1 up, 1 down, 1 up, 1 down, 2 up, 1 down... and so on.
Does anyone have any solution for this problem? It's like this in Qosmio player and Windows.
Truls

Hi again
I am not technician but according to your explanation I believe that there is mechanical problem with volume control dial. On this way we can just speculate but just intensive check can give you an precise answer.
In my opinion you should contact Toshiba service partner in your country and explain them the situation. Sorry but I dont see any other solution.
If the warranty is still valid the repair will be for free. If you need ASP address you can find it under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true
Bye and good luck!

Nokia 6300, amr sound volume problem

I have Nokia 6300 the phone volume can not play high when play amr files.

Yeah.I've also experiencing that on my N5300.I think it's on the firmware.
If you want to address this issue, you can drop a message to Nokia Care.To send an email, please click on the link below.
http://www.nokia.co.uk/A4222231

Want to increase volume on my laptop

Want to increase volume on my laptop but nothing I have tried works.

Hi,
One thing can may help a little is the following. Right click the speaker icon in the Taskbar and select 'Playback Devices'. Left click the default device once to highlight it ( it's usually 'speakers & headphones' ) then click the Properties button. Click the Enhancements tab and put a tick in the box next to 'Loudness Equalization'. Click Apply to save the change and then click OK in all remaining windows and see if this has helped at all.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Volume gain fluctuation problem in iPad(random decreasing/increasing volume) with audio monitoring enabled.

I have one bass track and a drums track picked from loops and when playing the guitar(iPad2 with apogee jam connected) with monitoring enabled I get gain fluctuation problems(random decreasing/increasing volume, some times mute). When I stop playing the guitar audio feedback gets back to normal.
Any idea?

Hi George Ward2
I'm wondering if you accidentally or unintentionally locked the audio in a segment/s where you intended to fade up or down. Altho you say it plays fine when you review it in iMovie. The place to review it is in iDVD. However adjustments are made in iMovie for the actual audio and video. Here's what I found in the Help Menu for iMovie since there isn't much info on the iDVD portion of the help menu for the same symptoms:
Making your movie louder or softer:
If you find that all or part of your movie is too loud or too soft, you can adjust the volume of your movie in the timeline viewer. You can increase or decrease the volume of the entire movie or just specific audio clips. For example, at a certain point in a video you might dramatically increase or decrease the volume of accompanying music.
IMPORTANT: These instructions are for setting the volume of video that people will hear as they play your movie. If you only want to adjust the volume of your computer's speakers, see "Adjusting the volume of your computer in iMovie HD" below.
To make your movie louder or softer:
Click the Timeline Viewer button (shown above).
Select the clip or clips whose volume you want to change in the timeline viewer.
Tip: To learn how to select multiple clips, see "Selecting clips" below.
Click the clip volume button (shown below), and then drag the slider to adjust the volume.
Tip: You can also type a new percentage in the field next to the clip volume button to adjust volume.
You can also make finer audio adjustments within a clip. For more information, see "Fading audio up or down."
Just out of curiosity .... is the source audio 12 bit or 16 bit?
Hope this is helpful and good luck.
SDMacuser

How to use Mouse Wheel Events

Hello Everyone
I am using Datagrid in my Canvas.
I use mouse wheel to scroll the datagrid. But in one scroll
through that wheel make the more than 4 rows to be scroll.
So Now my requirement is to control the delta value of mouse
wheel event and how to use that with my datagrid so that i will
able to scroll one row through mouse wheel scroller.
Thanks

please give me some suggestion around it.
I want to scroll one row of datagrid with per mousewheel
scroll. I am not getting how to use the scrollMouseWheelMultiplier
property of the IConfiguration class because i am not able to
create the object of this class.
I am using the Flex 3.0 and flash 9 version.
please help me out around this.

NOKIA BH-111 : Increase volume using volume wheel ...

Similar Messages

Maybe you are looking for