Nokia Big Screen has Small Resolution

Am using Nokia Phone Broswer 2 together with Nokia Big Screen for HDMI connectio to TV set. This produces low-resolution iamges on the TV screen, as if the phone browser choses a resolution for its own screen and is not aware of the Big Screen.
I suggest Nokia to improve the integration between these 2 apps

 It's not possible to use BigScreen to browse the internet on a TV. It currently only supports videos, pictures and music.
All the best.
Ray. 

Similar Messages

  • Nokia Big Screen won't install

     I get the error "Unable to install application from a supplier that is not trusted"
    This has been happening for about a week.
    I'm running official ANNA on an N8.
    Is everyone having this problem?
    Solved!
    Go to Solution.

    "If you faced installing problems and you have "ODML commons repository" installed in Settings... Application installer, try removing that. It's a part of some old Maps Beta that stays on system persistently. Re-install Maps if needed."
    I did this and now I can install Nokia Big Screen!  Yay.

  • Nokia Big Screen with subtitles support!

    Check this out guys!
    http://betalabs.nokia.com/apps/nokia-big-screen
    Supports subtitles only via HDMI out but still, it's awesome

     It's not possible to use BigScreen to browse the internet on a TV. It currently only supports videos, pictures and music.
    All the best.
    Ray. 

  • The middle section of my Firefox screen has small fonts. The left side has big fonts. I can't read my emails because the content is small

    So when I click on contacts to add to an email they are very small, as well as the delte, next, move buttons. All the middle section of the screen. Left side is OK.

    Reset the page zoom on pages that cause problems.
    *<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    *http://kb.mozillazine.org/Zoom_text_of_web_pages
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    If you have increased the minimum font size then try the default setting "none" as a high value can cause such issues.
    *Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
    Make sure that you allow websites to choose their fonts.
    *Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
    *https://support.mozilla.org/kb/Changing+fonts+and+colors

  • Nokia N9 screen has a yeloow tint?

    Hello
    I just bought Nokia N9 but  I see that the white color isnt true white like other devices 
    I opened Google page on both N9 and N8 , N8 has a better white while the N9 tends to yellow
    However when i look at the N9 screen from corner , this yellowish tint is gone
    Is my handset faulty or it is common N9 problem?

    Yes, mine also shown a slight tint of yellowish, not too obvious to me until i don't compare it to other phone.
    See the comparison I did with other phones.
    http://discussions.nokia.com/t5/Nseries-and-Symbian-Smartphones/808-PureView-gets-Purple-Tint-Displa...

  • Nokia N95 screen has some flickering.

    Question: where to buy the Flex Cable for Nokia N95.  The 1st version one.(not 8GB). I want to buy the original Flex Cable.

    Flex cable should only be replaced by a Nokia Care Point. Trying to replace it yourself will involve disassembling the phone and we are not allowed to discuss that here.
    You can find your nearest Nokia Care Point at:
    For UK
    http://www.nokia.co.uk/A4228006
    For Europe:
    http://europe.nokia.com/A4388379
    For Asia-Pacific
    http://www.nokia-asia.com/A4416070
    Elsewhere:
    http://www.nokia.com select your country, go to the support section, then select repair.

  • Why does my login screen when scrolling mouse over appear pixalated (has small squares wherver the mouse scrolls until the entire page has been scratched like a lotto ticket:) ?

    Why does my login screen when scrolling mouse over appear pixalated (has small squares wherver the mouse scrolls until the entire page has been scratched like a lotto ticket:) ?

    OS X Lion: Login window partially appears, cursor movement redraws screen

  • My screen has gone small, how do I get it back to normal?

    I own a 13inch Macbook Pro and the screen has suddenly narrowed so it gone really small, how do I get it back to normal?

    Use Settings > General > Accessibility > Zoom and turn this Off.

  • Resolution seems a little low on big screen TV

    I shot some video at 1920x1080 (30 frames per sec). I used continuous lighting to light my subject. ISO was 640. The final results look really good. However, after burning to DVD using Encore to prepare the DVD, the movie looks a bit pixely. It does not appear noisy at all (because of the 640 iso), just a bit mid resolution. I have seen sharper, higher quality video on my big screen tv when I view a movie or TV. My big scrren TV is 50"
    Is this normal or have I exported the movie improperly from Premiere to get this issue? The export settings I used from Premiere were: Format:Quicktime, Preset:HD1080i 29.97, H.264, 48khz
    Thank you.

    Thank you for all the feedback. Really appreciate it. However, I am a newbie to Premiere and just discovered last night that to burn to DVD, I need to use Encore so I worked on learning that today. Most of the suggestions above are really a little over my head since I am so new to this. Basically, I shot HD video with 2 digital cameras - A Canon 7D and a Canon Rebel 3Ti. From there, I used Premiere to do all the editing of the video, added an intro movie at the beginning with a soundtrack from istock. I was a little unsure what to do once I had that completed. It did look quite good on my imac. From there I exported the entire thing as a Quicktime file, Preset:HD1080i 29.97, H.264, 48khz. Then I wanted to burn the file to a DVD so I could show my client. That is when I realized I just can’t burn away. So I did some research online and it looked like I needed to use Encore to do it. From there, I created a menu with buttons and it all seemed to work ok. When I reviewed the DVD on my big screen, that is when I noticed the slight resolution loss.
    Can one of you give me alittle direction (simple language for the newbie) as to what I should do? The advice above is just a bit over my head. I do not have a blue-ray burner by the way. I am also concerned about going to blue ray just because some people that will be viewing this video may not have blue ray.
    Thank you so much—I really appreciate your help.

  • Photoshop 12 screen has gotten too long on OS X, cannot get to the bottom to reduce, how do I make it smaller?

    Photoshop 12 screen has gotten too long on OS X, cannot get to the bottom to reduce, how do I make it smaller?

    Stuck Windows in Photoshop Elements on a Mac | Barbara's Sort-of-Tech Blog

  • Why did you changed the big screen picture it look so better that way PLSS !!! Put it back so small I can not  even see who's calling me

    Why did you changed the big screen picture it look so better that way PLSS !!! Put it back so small I can not  even see who's calling me

    Send feedback below:
    http://www.apple.com/feedback/iphone.html

  • My iPhone 5 has started to take small resolution photos

    My iPhone 5 has started to take small resolution photos (640x852) using the standard camera app (back camera, not the low res front camera)), how do I get back to the original large resolution photos it used to take? Thanks Natasha.

    Problem solved, see post:
    https://discussions.apple.com/message/27869012?ac_cid=tw123456

  • My macbook pro screen has froze, since last night. screen is white. small box on screen reads: if an application doesn't respond for a while ....... the app shown is finder, the cursor is a colorful spinning wheel.  help!!

    my macbook pro screen has froze.  the background is white.  there is a small box on the screen that reads:  if an application doesn't respond for a while, select it's name and click Force Quit.  the app is Finder.  the cursor is a very colorful spinning wheel while inside the box and an arrow outside of it.  I have tried using the command-opt-erase keys, nothing.  please help!!

    Restart the MacBook Pro. To do this, press Control, Command and Eject keys, or hold the Power button until the Mac turns off

  • My screen has streched out real big and the touch screen is difficult to use and can't return the screen to normal size.Has anyone ever experienced this?

    My screen has streched out real big and the touch screen is difficult to use and can't return the screen to normal size.Has anyone ever experienced this?

    Double-tap the screen with three fingers, then go to Settings and disable the Zoom function so you don't accidentally trigger it again.
    The User Guide is available at http://support.apple.com/manuals/ or downloadable from iTunes as an iBook.

  • Iphone with big screen resolution, why?

    When you turn on the cell phone the big screen appear and you can not type the password

    This is asked and answered often.  A forum search would find the answer quickly as would a review of the manual:
    iPhone User Guide (For iOS 4.2 and 4.3 Software)
    Double tap with three fingers
    It is the zoom feature.

Maybe you are looking for

  • What would i do if my iphone appears iPhone is disabled connect to iTunes

    what would i do if my iphone appears iPhone is disabled connect to iTunes

  • Report Writer Adding New GL Account

    Hi experts, I would like to add new GL Account in the existing report in Report Writer. I do Do have following information to make changes, but I don't know where I could add new Gl Account. Library = ZRU Report Group = ZBS2 Report Name = ZBS-0002 Pl

  • Unique constraint violation - Finding inserted row before commit

    Hi,   I have a scenario something like that, where I need to insert a row to a table - contact, for different employees under different department. So I happen to insert same employee contact multiple times & do commit at the last if there is no cont

  • Thirdparty remittance for Garnishment

    Hi Gurus, Need your help on this. When a third party Posting is done for Garnishment. Can you let me know what is the format of  Reference document number created by SAP in Posting run. It should be like this HRGRNXX3567 for Garnishment? We have a er

  • My imac won't turn on a1311 intel core i3 late 2010

    Hey, today after a power off my iMac won't turn on, I've tried reseting it plugging it and holding the power button but nothing happens, im really worried, i have to finish an edition and have al native videos  there... HELP!