Nokia Black update does not contain correct carrie...

In Belgium when you are on the mobile network carrier called Telenet, you'll need the Windows Phone rom image called CV Belux! Or otherwise the phone will be in constant roaming mode, because the update carrier id list for Belgium is only avaliable in that rom.
But guess what!!! The Lumia Black update screwed this up again! Now my phone states I'm on CV Belux but I'm again in constant roaming mode!
Please stop the lumia black update in Belgium and fix this...
Other - what do I now need to do to get this fixed??

Yeah, after hours of searching it must be so that my son has a 8GB i.e. a 2G version and mine just happens to be the 3G as I bought mine a month later....did not know how to know the difference but now solved, thnx.

Similar Messages

Nokia Software Updater does not recognize 6110 Nav...

Hi,
I've been trying all day to update the Firmware on my 6110 Navigator. I've checked on the website and Nokia is listing a new Firmware version available.
The problem is that when I run Software Updater I keep getting the message "Phone is not supported - Connected phone is not recognised".
I've run PC Suite cleaner and other packages to clean my registry and have installed PC Suite v6.86.9.3 and Software Updater v1.4.36en. Although all the other PC Suite functions are working fine I cannot get the Software updater to run.
Although there's a couple of posts with the same problem I cannot find a solution on any of them.
Anyone with any clue PLEASE HELP.
Thanks,

Taugis,
If the method as described by Rider5512 does not prove to be the solution you require, Microsoft does have an official Windows 7 Support Forum located here http://tinyurl.com/9fhdl5 . It is supported by product specialists as well as engineers and support teams. You may want to also check the threads available there for additional assistance and feedback.
Also to get your questions answered on the most common challenges around application compatibility when coming from a legacy operating system, why changes were made along the way, compatibility technologies inside the OS and methods for getting incompatible applications to run on Windows 7, please go here: http://tinyurl.com/yfa2yyz
Jessica
Microsoft Windows Client Team

Nokia software updater does not recognize Windows ...

I tried to install nokia software updater to my pc,WIN7 ultimate,and installation cannot begin,because its does not recognize OS.

Taugis,
If the method as described by Rider5512 does not prove to be the solution you require, Microsoft does have an official Windows 7 Support Forum located here http://tinyurl.com/9fhdl5 . It is supported by product specialists as well as engineers and support teams. You may want to also check the threads available there for additional assistance and feedback.
Also to get your questions answered on the most common challenges around application compatibility when coming from a legacy operating system, why changes were made along the way, compatibility technologies inside the OS and methods for getting incompatible applications to run on Windows 7, please go here: http://tinyurl.com/yfa2yyz
Jessica
Microsoft Windows Client Team

Lumia black update does not support glace screen i...

Recently, i have updated lumia black in my lumia 520. But as claimed in advt., I couldn't get the update of glace screen. Their is no link visible in settings.

where was it claimed? The Lumia 625 and 520 does not support Glance screen even when updated to Black.

E90 Nokia Sofware Updater does not recognize the n...

Hi
I am trying to upgrade firmware from 7.24.03 to 7.4.12. When I use the Nokia Software Update to update the software it detects the software version on my phone as 7.24.03 and the latest software version available as 7.24.03 but the nokia website states that the latest software update 7.40.12 is now available for update.
Does anyone knows why this is happening?

Something strange is happening..
Two weeks ago I checked with my SW updater..
It said..New Revsion available..Do you want to install?
...I knew from other BBs that this would take at least half an hour and that it meant sitting and watching/helping the process/steps.
I decided to wait until I had a free hour...
Yesterday I did...
Now the same SW updater say..."you have the current version"..
This is V07.24.03 dd 12 07.2007.??
Either Nokia server has a bug..or Nokia have decided to put a hold on 7.40.12 ..Reason could be that there is a Newer new version soon available.
Message Edited by peterf on 16-Jan-2008 06:21 AM

Report refresh does not contain correct data

Hi all,
I'm having a problem with an interactive report. this report contains checkboxes for each row.
When clicking the submit button, a process is called which changes the status of the checked records.
This status change should cause the IR to not query these records anymore after the submit, but they still appear even though i did a commit after the proces.
When i refresh the page the correct records are removed from the report.
Is this normal because i thought the page processes are completed before branching is executed.
Grtz,
Mario

my mistake, i was doing a query with sysdate in the where clause, but when using systimestamp this problem was solved.

Satellite A100 bios update does not work correctly

Hi,
I have a Satellite A100-153 PSAA9E and using Vista OS.
How do I install the new bios?? I run the .exe and nothing happens it shows that it extracts some files and then a notepad text appears that says something like this.
' INVENEC Pre-Flash Script for SanAntonio10
' 09/26/2006 Version 1.0.0.3
On Error Resume Next
'=== Declare Variables & Objects
Dim WshObj, objArgs
Dim WMIObj, chipset
Dim InfoStr, WorkPath
Dim VideoType
Dim fso, oFile etc....
and then an error appears that says if the SanAntonion10 BIOS590MP.exe is installed correct.
pls help

Hm, sounds a little bit weird. I would suggest you to do the following:
go to the drivers download page
-> http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
Download the latest common modules if available and RE-download the BIOS update.
Then try it again. If this doesnt help then perform a full system recovery, download the BIOS update and then it MUST work.
Greets

E71 - Nokia PC Suite - does not connect ? unable t...

I installed Nokia PC Suite (v7.1) on my PC's:
Connected Nokia E71 with USB-cable
(Mass Storage > Via Windows Explorer I can see the directories on the memory card of the E71)
Problem-1: Nokia PC Suite gives error: "unable to find device"
(while phone is unlocked, USB mode is not applicable)
Problem-2: Also Nokia Software Updater does not work (cannot find device)
Happens both on XP and Vista PC.
In other words... I can't access my E71 at all. Who knows a solution ?

Hi, i just ran into the same problem with the "Device Not Found" I will give the steps for what fixed my problem.
Connect the phone to your computer via data cable. Select "Connect Pc to Web". Then, inside the folders run the installer.exe** and select Repair instead of Uninstall. Now your device should work like a charm.
**If the installer.exe interrupts you saying that the version installed on the computer is newer than what you are trying to install and exits itself, you will have to go to control panel to uninstall Nokia Pc Suite and reinstall it with the phone you plan on using so it will be the correct version. Even after you reinstall Nokia Pc Suite you may have to run the installer.exe a second time and select repair before it will work. I did anyways.
I hope this fixes your problems you are having. Also the reason it is hard to get tech support for stuff like this is because when you can connect your mobile internet to the pc you can use a lot of data because you have more access to things. Eventhough you may have an unlimited data plan most if not all companies will ban your phone possibly without notice if you use more data then they want you too. Also tethering, which is what we are all trying to do. Is illegal for most if not all phone companies. Always best to read the Terms and Conditions.
As far as the USB not beeping when connecting the cable. I didn't hear mine either but it worked but if yours isn't working try this: Start -> Right-Click Computer -> Properties -> Device Manager-> Check all USB devices to make sure they are working properly and you may need to reinstall them.
Please reply to let me know if anything worked. If it did please check solution button to allow other people to find my post. Thanks for any replys to my post.

Request does not contain any saved update rules; rollback not possible

Hi,
In BW on hana, there's a 3.x flow DSO where it loaded a request from PSA.
It failed due to activation error SID Generation. But unfortunately, due to PSA Deletion process chain, it's PSA Request got deleted.
Now, we couldn't delete the red request(failed request) from the 3.x flow DSO.
If we try to delete, it shows job has been completed successfully with the following message:
Job started
Step 001 started (program RSDELPART1, variant &0000000004233, user ID )
Delete running: DataStore object ZREBATE, from 630,138 to 630,138
Delete is scheduled; Selection conditions were substituted
Request REQU_6412GVIEWBJ0TZZIMZE2TZIOR does not contain any saved update rules; rollback not possible
Deletion of request REQU_6412GVIEWBJ0TZZIMZE2TZIOR from data target ZREBATE failed
Deletion of request REQU_6412GVIEWBJ0TZZIMZE2TZIOR from data target ZREBATE failed
Request REQU_6412GVIEWBJ0TZZIMZE2TZIOR does not contain any saved update rules; rollback not possible
Job finished
I went to the table RSICCONT and checked the mentioned request. But I couldn't find delete option enabled. Even our basis team doesn't have authorization to delete the mentioned request from the standard table RSICCONT.
Request you to please help me how to handle this.
Regards,
Antony Jerald.

Hi Antony,
Once you have deleted the data in PSA there is no way to reconstruct the request hence you can do below things to correct it
1) Identify the No of Records which having error , because if you have more records it will take more time as in debug mode we have option to edit only one record at one.
2) Display only one record in Active table and change it using the Debug option ( not recommended ), but as you are in corner we need to use this
3) change the records with respective values and active the request again
Regards
Jagan

SOLVED - BIOS UPDATE "SYSTEM DOES NOT CONTAIN the NECESSARY WMI SUPPORT for this VERSION of HPQflash

If you get infamous error when updating HP Portables (laptops/notebooks/ netbooks) BIOS within Windows:
"SYSTEM DOES NOT CONTAIN THE NECESSARY WMI SUPPORT FOR THIS VERSION OF HPQFLASH":
I am posting a solution found for own business laptop (HP 8540W & 8760W) so WebSearch engines index/register it in a few days - future sufferers come here and get a SOLUTION, finally. Disreagrd previous "experts" advises, they don't work 100% & pity on TechSupport folks who get HP paychecks yet don't know products their co. designs/manufactures (on deep Technical level):
Below is a SOLUTION (WORKING) !
Go into Services (Run "services.msc" or get there thru ControlPanel-->AdminTools-->), find following 2 services ==> make sure they're running, chances are they're NOT (as in my case I keep them disabled unless need running):
1) "HP Software Framework"
2) "HP Service" [no typo - a real plain name]
If not running, set Properties-->Manual and click "Start", make sure both are running.
Rerun BIOS updater, choose option for "Within Windows" or something to that effect (using HPQ/ROMpaq updater), rather than "create USB BootDisk on Key", this time it should work without the hassle of a BootDisk creation.
Should work from within Windows environment.
Notes:
a) Likely only one (1) service is responsible - namely "HP Software Framework" for HPQ Updater to fail, but doesn't hurt to reenable/restart both services.
I in fact am responding to other customers who elect to Update BIOS within Windows, perhaps oldfashioned but to me Boot Updater is more natural & always works regardless of WMI Support.
b) After done, don't forget:
*) Recheck BIOS settings - update may've added new and/or changed old, so rescan tobe sure.
**) Go BACK into Windows-->Services.msc & redisable both aforementioned Services if were originally disabled; or you're a computer Pro, you know what you're doing & like me keep all HP services disabled. The ones we got on EliteBook 8760W are pests consuming system resources, you just enable "Software Framework" when occasional issues emerge with HP softupdate (typically no issues) & redisable after use, rest of services are bloatware - some attempt to overrun Windows Wireless console, some seekout HP Networked printers (Ethernet, Wireless, but not USB), some do this & that - I study/know which one does what and decided to disable all. This is called a "minimalist" philosophy & turns your machine into a fast beast, I recently sold a very obsolete 4-year laptop which however handles 3DMCAD & complex designs/simulations, better new machines out fo a store, as new machines are loaded w/bloatware chocking down resources.
BUT nobody is requiring you to disable anything though.
The solution merely states the fact:
These 2 (or 1) services when not running halt BIOS Update "within Windows" (you can still run "BootDisk option", however, if preferred).
Simply restartung them solves your problem. Usually
Ya'll have a good day and enjoy!
===========
BELOW ARE IMPORTANT WARNINGS:
1) IF YOUR BIOS UPDATE STILL FAILS, SOME OTHER PIECE IN WMI SUPPORT IS MISSING - IN MY CASE WAS THESE 2 SERVICES, BUT THERE'S REMOTE POSSIBILITY SOMETHING ELSE MIGHT BLOCK UPDATER. DON'T WASTE TIME & CHOOSE "USB/BootDisk" options instead
2) Once BIOS updater does its job, will ask to auto-restart - let it go on & complete, it will self-shutdown (click "Next" to skip 60-second timer), then do NOT turn it on manually!, wait - it'll turn on by itself in 15 seconds, let it boot into Windows, you're done!
3) WARNING: close other apps before proceeding, be 100% sure your ACpower won't be interrupted or better yet - make sure battery is in/charged (so if ACpower accidentally disconnects, you're autoswitched onto battery) b/c power loss may result in severe damage to internal hardware. In the old days it'd result in fatal damage, these days powerloss would still result in a major repair (ROM chip corruption).
So to summarize: those 2 services I specified, are often responsible for whether HPQ/ROMpaq will or won't run.
Other causes possible, but I've not witnessed; and if so - choose BootDisk option.
===
Stan M. Starinski, MSEE.

Hello Ceramics.
Your ProBook is an Enterprise model. It would be a good idea to also post your question to the HP Business Boards as those forums deal specifically with that kind of product. Here is a link.
Have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Reader &Acrobat CAB for SCUP does not contain update info

The Adobe Reader and Acrobat CAB files for use with SCUP, Patch Manager and WSUS does not contain any pre-requisite information. It also removes pre-requisite information from Adobe updates that have already been published to a WSUS server - thus halting all Adobe Reader and Acrobat updates. When is the CAB file going to be updated ?

The applicability rule is seen in the XML format as below,
<sdp:InstallableItem ID="de22ec71-8315-42b7-b4e5-f87270f80216">
- <sdp:ApplicabilityRules>
- <sdp:IsInstalled>
<msiar:MsiPatchInstalled />
</sdp:IsInstalled>
- <sdp:IsSuperseded>
<msiar:MsiPatchSuperseded />
</sdp:IsSuperseded>
- <sdp:IsInstallable>
<msiar:MsiPatchInstallable />
</sdp:IsInstallable>
- <sdp:Metadata>
- <msiar:MsiPatchMetadata>
- <MsiPatch xmlns="http://www.microsoft.com/msi/patch_applicability.xsd" SchemaVersion="1.0.0.0" PatchGUID="{AC76BA86-A440-FFFF-A440-7A8C40011003}" MinMsiVersion="4" TargetsRTM="true">
- <TargetProduct MinMsiVersion="300">
<TargetProductCode Validate="true">{AC76BA86-1033-FFFF-BA7E-000000000006}</TargetProductCode>
<TargetVersion Validate="true" ComparisonType="Equal" ComparisonFilter="MajorMinorUpdate">11.0.00</TargetVersion>
<UpdatedVersion>11.0.03</UpdatedVersion>
<TargetLanguage Validate="false">0</TargetLanguage>
<UpdatedLanguages>1058</UpdatedLanguages>
<UpgradeCode Validate="true">{AC76BA86-0000-0000-BA7E-7E8A45000000}</UpgradeCode>
</TargetProduct>
- <TargetProduct MinMsiVersion="300">
<TargetProductCode Validate="true">{AC76BA86-1033-FFFF-7760-000000000006}</TargetProductCode>
<TargetVersion Validate="true" ComparisonType="Equal" ComparisonFilter="MajorMinorUpdate">11.0.00</TargetVersion>
<UpdatedVersion>11.0.03</UpdatedVersion>
<TargetLanguage Validate="false">0</TargetLanguage>
<UpdatedLanguages>1058</UpdatedLanguages>
<UpgradeCode Validate="true">{AC76BA86-0000-0000-7760-7E8A45000000}</UpgradeCode>
</TargetProduct>
<TargetProductCode>{AC76BA86-1033-FFFF-BA7E-000000000006}</TargetProductCode>
<TargetProductCode>{AC76BA86-1033-FFFF-7760-000000000006}</TargetProductCode>
<ObsoletedPatch>{AC76BA86-A440-FFFF-A440-7A8C40011001}</ObsoletedPatch>
<ObsoletedPatch>{AC76BA86-A440-FFFF-A440-7A8C40011002}</ObsoletedPatch>
- <SequenceData>
<PatchFamily>AC76BA861033FFFFBA7E000000000006</PatchFamily>
<Sequence>11.00000.03000.10000</Sequence>
<Attributes>1</Attributes>
</SequenceData>
- <SequenceData>
<PatchFamily>AC76BA861033FFFF7760000000000006</PatchFamily>
<Sequence>11.00000.03000.10000</Sequence>
<Attributes>1</Attributes>
</SequenceData>
</MsiPatch>
</msiar:MsiPatchMetadata>
</sdp:Metadata>
</sdp:ApplicabilityRules>
<sdp:InstallProperties CanRequestUserInput="false" RequiresNetworkConnectivity="false" Impact="Normal" RebootBehavior="CanRequestReboot" />
- <msp:MspInstallerData FullFilePatchCode="{ac76ba86-a440-ffff-a440-7a8c40011003}">
<msp:MspFileName>AcrobatUpd11003.msp</msp:MspFileName>
</msp:MspInstallerData>
<sdp:OriginFile FileName="AcrobatUpd11003.msp" OriginUri="http://armdl.adobe.com/pub/adobe/acrobat/win/11.x/11.0.03/misc/AcrobatUpd11003.msp" Digest="NW3lgIGvJ90NX6tUWYP0em8G2wk=" Size="121290752" Modified="2013-05-11T12:23:59Z" />
</sdp:InstallableItem>

Certificate does not contain the correct site name

Hello,
I have to make a midlet that connect to a tomcat 5.5.9 server with ssl.
I import the certificate whit tomcat alias in the wireless toolkit but when i run the midlet this error appear: Certificate does not contain the correct site name
import java.io.*;
import javax.microedition.midlet.*;
import javax.microedition.io.*;
import javax.microedition.lcdui.*;
public class HelloNet extends MIDlet implements CommandListener , Runnable{
// User interface command to exit the current
// application.
private Command exitCommand = new Command("Exit",
Command.EXIT, 2);
// User interface command to issue an HTTP GET
// request.
private Command getCommand = new Command("Get",
Command.SCREEN, 1);
/// The current display object.
private Display display;
// The url to GET from the 'net.
private String url;
* Initialize the MIDlet with a handle to the
* current display.
public HelloNet() {
url = "https://127.0.0.1:8443/Hello.txt";
     display = Display.getDisplay(this);
* This lifecycle method should return immediately
* to keep the dispatcher
* from hanging.
public void startApp() {
     showPrompt();
* Display the main screen.
void showPrompt() {
String s = "Press Get to fetch " + url;
TextBox t = new TextBox("Http Result", s,
s.length(), 0);
t.addCommand(exitCommand);
t.addCommand(getCommand);
t.setCommandListener(this);
     display.setCurrent(t);
* pauseApp signals the thread to stop by clearing
* the thread field.
* If stopped incorrectly, it will be restarted from
* scratch later.
public void pauseApp() {
* destroyApp must cleanup everything. The thread
* is signaled
* to stop and no result is produced.
* @param unconditional is a flag to indicate that
* forced shutdown
* is requested
public void destroyApp(boolean unconditional) {
* commandAction responds to commands
* @param c command to perform
* @param s Screen displayable object
public void commandAction(Command c, Displayable s) {
     if (c == exitCommand) {
     destroyApp(false);
     notifyDestroyed();
     } else if (c == getCommand) {
          Thread th= new Thread (this);
          th.start();
* Read the content of the page.
public void run() {
TextBox t = null;
StringBuffer b = new StringBuffer();
HttpsConnection c = null;
InputStream is = null;
     try {
     int len = 0;
     int ch = 0;
     System.out.println("Cerco di leggere");
c = (HttpsConnection)Connector.open(url);
c.setRequestMethod(HttpsConnection.GET);
     is = c.openInputStream();
// length of content to be read.
len = (int) c.getLength();
if (len != -1) {
// Read exactly Content-Length bytes
for(int i=0; i<len; i++) {
if((ch = is.read()) != -1) {
b.append((char) ch);
} else {
// Read until connection is closed.
while((ch = is.read()) != -1) {
len = is.available();
b.append((char) ch);
t = new TextBox("Https Result", b.toString(),
b.length(), 0);
     } catch (Exception e) {
e.printStackTrace();
String s = e.toString();
if(s != null) {
t = new TextBox("Https Error", s, s.length(),
0);
} finally {
if (is != null) {
     try {
          is.close();
     } catch (Exception ce) { }
if (c != null) {
     try {
          c.close();
     } catch (Exception ce) { }
display.setCurrent(t);
}

re: code tags, please see http://forum.java.sun.com/help.jspa?sec=formatting.
As for the rest:
See, we now know that you used keytool to generate you certificate. You need a new certificate. This time, when keytool asks you for a first and last name, type 127.0.0.1.

I have a manual that contains headings and index entries that contain less than and greater than characters, and . The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the C

I have a manual that contains headings and index entries that contain less than and greater than characters, < and >. The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the Contents or the Index of the generated HTML. In the Contents the words are completely missing and in the index entries the '\' characters that are required in the markers remain in the entry but the leading less than symbol and the first character of the word is deleted; hence what should appear as <dataseries> appears as \ataseries\>. I believe this is a FMv12 bug. Has anyone else experienced this? Is the FM team aware and working on a fix. Any suggestions for a workaround?

The Index issue is more complicated since in order to get the < and > into the index requires the entry itself to be escaped. So, in order to index '<x2settings>' you have to key '\<x2settings\>'. Looking at the generated index entry in the .js file we see '<key name=\"\\2settings\\>\">. This is a bit of a mess and produces an index entry of '\2settings\>'. This ought to be '<key name=\"&lt;x2settings&gt;\" >'. I have tested this fix and it works - but the worst of it is that the first character of the index entry has been stripped out. Consequently I cannot fix this with a few global changes - and I have a lot of index entries of this type. I'm looking forward to a response to this since I cannot publish this document in its current state.

DNG converter 8.3 download. does not contain camera raw 8.3 update. Where can I find it? (Mac)

DNG converter 8.3 download. does not contain camera raw 8.3 update. Where can I find it? (Mac)

Finally found it here
http://helpx.adobe.com/x-productkb/multi/camera-raw-84-support-policy.html#Revert%20to%208 .3%20on%20Mac%20OS
No installer, just the plug-in.

HT4623 After the iOS 7 update my camera does not operate correctly. It will take about 5 photos then it becomes very sensitive, moving between "video & square". I turn it off & back on, it work for a second or two & lockout again.

After updating my iPad my camera does not operate correctly. It will take about 5 photos then lockup. It also becomes very sensitive when I try to zoom in, it changes to "video or square". I have to turn off for awhile then it repeats the same malfunction, just lockup again.

After updating my iPad my camera does not operate correctly. It will take about 5 photos then lockup. It also becomes very sensitive when I try to zoom in, it changes to "video or square". I have to turn off for awhile then it repeats the same malfunction, just lockup again.

Nokia Black update does not contain correct carrie...

Similar Messages

Maybe you are looking for