Nokia booklet doesnt boot and no bios

hi
Ive bought a new booklet and installed all the updates. While surfing on the internet i suddenly wasnt able to use the keyboard or the touchpad. I wanted to restart but the power button didnt react too. So i took the battery out of the booklet.
But now it doesnt boot and theres a black screen. I cann hear the fan but after a few minutes the booklet turns off aggain. What can i do???

There is no fan, but what you hear might be the hard disk. BTW, does the Booklet/BIOS really not offer an option to boot from SD cards (which has been a common feature for ages on many notebooks featuring such readers), or do they just need to be formatted in some particular/peculiar way? I did see an "Operating System not found" error message when waking up from hibernation while an SD card was plugged in, so under some circumstances it DOES seem to try (and give preference over the hard disk).

Similar Messages

  • Slow boot and no bios screen on first startup of day

    I have an hp pavilion HPE, "h8-1080t" that is 3+ years old. I was having problems with my video card and lack of drivers. After researching here and toms hardware I was told a radeon hd 7750 would be a good choice. Which it was. At the time
    I also upgraded to a samsung 840 evo @500g.
    The system has been running for the past 4 months with boot times of about  15 seconds to desktop.
    ==========
    system specs:
    HP H8-1080T
    intel 970 cpu, 6 cores @3.2ghz
    12g DDR3 ram
    500gb samsung 840 evo (firmware updated day on installation, approx 4 months ago)
    1.5tb hdd data drive
    after samsung. Replace nvidia gt 545 with amd hd radeon 7750. (latest drivers installed.)
    System since than has been booting normally, (about 15 seconds to desktop due to ssd.)
    =======================================================================
    Roughly a month ago I noticed that on the first boot, "in the morning," the display was slow to come up, roughly 1:45 +. It never showed the bios page, and it started taking longer and longer for it to show the windows 8.1 logon.
    I than tried a warm reboot and it showed the bios page and reboot took only 15 seconds to desktop. All my programs run quickly and normally. I also shut it down and restarted it with normal results.
    The only question is why when I first start the pc in the morning does it take so long before the screen shows anything. the only info I've come up with is from the event log and it as follows. again this only occurs during the first boot of the day, all subsequent
    reboots are normal including a complete power off/power on. any ideas would be appreciated. TIA
    The Desktop Window Manager is experiencing heavy resource contention.
    Reason : CPU resources are over-utilized.
    Diagnosis : A sharp degradation in Desktop Window Manager responsiveness was observed.
    - System
        - Provider
          [ Name] Microsoft-Windows-Diagnostics-Performance       [ Guid] {CFC18EC0-96B1-4EBA-961B-622CAEE05B0A}
          EventID 500       Version 1       Level 3       Task 4006       Opcode 39      
    Keywords 0x8000000000010000     - TimeCreated
          [ SystemTime] 2014-04-19T14:12:36.238727100Z
          EventRecordID 2065     - Correlation
          [ ActivityID] {B5DF960A-5B6D-0000-60BC-DFB56D5BCF01}
        - Execution
          [ ProcessID] 1460       [ ThreadID] 9620
          Channel Microsoft-Windows-Diagnostics-Performance/Operational       Computer Steven-HP     - Security
          [ UserID] S-1-5-19
    - EventData
        DisplayDeviceFriendlyNameLength 26     DisplayDeviceFriendlyName AMD Radeon HD 7700 Series     MemoryBandwidth 7281900     MemorySize 4003504128     Scenario
    3

    Did this operating system comes with this PC (OEM)?
    Did you also having issue with Windows Genuine?
    If yes, maybe graphic card manufactured caused this issue. I suggest contact HP to guide you to troubleshot Hardware issue. Based on my experience, OEM OS will have abnormal behavior since there is replacement CPU, graphic card, memory ect. HP build and
    test this PC based on their own specification, check the HW upgrade suggestion at HP site. try to update the driver like CPU and BIOS
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02837360&tmp_task=prodinfoCategory&cc=us&dlc=en&lc=en&product=5115727

  • Freeze at startup, cannot boot and access bios?

    Guys, I'm in very weird situation. After resize one partiion in my hard drive (using Gparted), at startup, I press ESC to access the BIOS options menu, following info displayed on screen Processor Type: Intel(R) Core(TM) i5-4460 CPU @ 3.20GHzProcessor Speed: 3200MHzL1/L2/L3 Cache Size: ...Memory Size: 4096 MB DDR3Channel 1 A: XMM1 4096 MBBIOS Revision/Date: v80.05 02/05/2015 Press the Esc key for startup menu Then the computer freezed, cannot boot to my OS (Linux Centos 7), I press Esc key but nothing happened. I've tried to reset the BIOS by removing the jumpers and CMOS battery. It works (OS loaded successfully) , but after rebooting, the same problem occur. I'm very confusing. I just bought this desktop recently. Please help me to figure this out. Thanks.  

    I would suggest doing what is known as a *Safe Boot* on your MacBook. To do this, hold down the shift key on your keyboard during startup. Among other things, this forces a check of your hard drive's directory, which is equivalent to using *Disk Utility* to repair the disk. It may or may not be successful. Note that the Safe Boot process takes a while. Keep holding down the key.
    Best of luck.

  • Nokia E50 doesnt boot...

    Hi, I've installed a signed theme I download from internet. After instalation, I applied that theme, and my E50 crash, I could'nt do anything, so I've removed the batterie, and reboot my phone... But after charging and displayed "NOKIA", the screen stay white, and it doesnt happens anything...
    Is there a way to turn the phone to its orignal configuration without phone's running ?
    thanks
    (I think that theme was made for a Symbian 9.2, or my E50 runs under 9.1 ... But no messages tell me that it's not compatible during the instalation)
    Solved!
    Go to Solution.

    It sound like it was a badly made or corrupt theme.
    Have you tried removing the battery for 5 minutes then trying?
    If so all you can do if it won't turn on is the hard reset. Unfortunately this reset will wipe everything from the phones memory but it is your only option.
    Hard reset:
    1. Switch off the phone.
    2. Hold down the following three buttons: Green (the call answer button), * button, and '3' button.
    3. While holding these buttons, hold the power button for a second to switch on the phone.
    4. Release when the phone shows the nokia hands logo or shows other signs of life like the language selection screen.
    It may take a few attempts and very flexible fingers!

  • After installing itunes Windows 7 doesnt boot and stalls while loading atipcie.sys driver

    After installing itunes my computer stalls when loading atipcie.sys driver. Computer will not boot up in safe mode or Last known good. Only resolution was to perform System Restore to a time before itunes was installed, thus deleting the itunes installation
    Anyone know of a fix or workaround for this issue ?

    Windows 7 64 bit core i7
    BSOD while updating to iTunes 10 with suspended installation of Apple Mobile Device Support. Network drivers no longer working as a result. Attempted fix by downloading from a different machine and competing install via files transferred over on flash drive. No dice. Attempted removal of iTunes, QuickTime, Apple Mobile Device Support, Apple Application Support, Apple Software Update to see if this would fix. Followed this up with a restart. This seems to have improved matters as system is starting up faster. No dice. Try reinstall network drivers from Sony ViaoCare disk. Installed and restarted. No dice. Next, try Widows 7 Network and Sharing diagnostics. No dice. Next try manual removal & reinstall of network driver using Device Manager, restart. Can't seem to re-install Network Controller. Still trying to solve this.

  • Any way to boot the Nokia Booklet 3G from SD(HC) ?

    Mentioned in /t5/Mini-Laptops/nokia-booklet-doesnt-boot-and-no-bios/td-p/896609#M1800 but this probably merits a thread of its own:
    Isn't there a way to boot from an SD card (which has the advantage over USB of not sticking out - and will often be there anyway as Windows 7 is in dire need of a ReadyBoost) ?
    Does an SD just need some special format, or can the Booklet 3G's BIOS really not recognize it at all (though even the earliest EeePC could) ?

    Unfortunately booting solely from SD card is not possible in Booklet 3G. SD card controller is not USB device but attached to PCI bus. BIOS is able to boot only from USB devices. Some Netbooks have their SD card readers attached as USB devices thus allowing to boot from SD card similarly to any other USB stick.
    The only way is to load enough of the OS from HDD/USB-stick to have PCI driver for SD card reader and then continue booting from SD card. For Linux that would mean that bootloader and /boot partition with initrd (having PCI SD card support) should be on HDD/USB medium and root partition can be in SD card. For Widows things are trickier. You;d have to read a lot about Windows PE and have a lot of time to craft the solution.
    Anyway for OS to be stored on SD card you need to have extra boot partition on HDD or USB medium, that BIOS of Booklet  is able to read.
    Nokia Booklet 3G upgraded with Intel x18-m SSD and Fedora 13 (Linux) as main OS

  • Nokia Booklet 3G and Windows 8

    Hi everybody!
    I've been reading this forum for a long time. I've already had two Booklets. First was the US version (beginning of 2010) and now I've been using another one, this time bought in EU.
    I know it's slow but still it offers the combination of features that I really like so I hope I'll be able to use it for some more time.
    Recently I've decided to try new release of Windows 8 Consumer Preview. Installed it without problems and have been running it for last couple of days.
    There's one thing missing though and that's the thing I really liked and used a lot before - the fn+F10 key functionality. I've installed the "Nokia_Booklet3G_HotKey" before all other software, I've tried various combinations. No success. I can only use fn+F10 to turn on and off BT+3G+WiFi all together.
    Here's why I decided to ask the Nokia Booklet 3G community for help and advice. Might be someone else tried to use Windows 8 and found a solution?

    Thanks mate, going to give it a go then. The 3G modem functionality is essential to me so if it works with that driver - I'm happy
    If this post has in anyway helped you, help others here in the community by clicking on the white star below and if appropriate - "also accept as solution"  

  • My ipod is freezing during booting and my pc doesnt recognize it

    Hi
    I did a restore ipod from my ipod and after it completed it , my ipod cant boot. It freezes during booting and my computer doesnt recognize it when i plug it.
    Is there anything I can do ?
    Thanks.

    http://support.apple.com/kb/ht1808

  • Nokia 603, doesnt switch on and shutdown after Nok...

    respected sir,
    i have recently bought a new nokia 603 ( march 2012 ) and didint used it much uptill now just 1 hour talk counter it runned uptill now, i upgrade it as soon as i bought it in the month of march, till 10th april it showed that your phone is up to date upgraded, but jsut two days before(12th april), i check online through wi-fi that its updates are availble of ( improved software size 24mb ), i didnt updated it as i was short of time, so i left it as it is, and didint proceed with the update ( i didnt pushed any button to start the update ).  after aafew hours my frined called me and told me that Skype has started to work in Nokia 603 as it was not working prevoiusly, i checked in my phone just 5 mints and Skype really started to work, i just went to office, over thier i recieved a call from my client and during call my phone got switched off by itself, i tired to restsrt it, but it didnt, on way back to home i took the phone to NOKIA CARE PAKISTAN(peshawar) office, they told me your phone software is totally dead and we will try to put another software in it, i was so much depressed that how Nokia is using such sub-standard software that it corrupted in just afew days, i really felt ashamed of buying Nokia phone, as i am an old fan of Nokia phones but Nokia 603 really disappointed me.

    Hi bilalaslam2020,
    Welcome to the Nokia discussion boards!
    Please accept our apologies for the troubles your device has caused you. This is not something that happens often and in your case, it may be just a bad software install.
    As you have spoken to our Nokia Care in Pakistan, they will be able to deal with your issue promptly and fix your Nokia 603 as it will be still under warranty.
    Let us know how you get on with this.
    Regards,
    haZey
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • My not nice story with Nokia Booklet 3G, polish st...

    Dear Sir/Madam,
    I would like to present my story brieflywith NOKIA service- Regenersis Company (Warsaw).
    I have bought netbook Nokia Booklet 3G on 08/08/2010.I was fascinated with this machine (due to the advertisement, what later turned to be my curse, and despite the price I have bought it in EuroAGD shop, based on Lipowa Street, in Gliwice.
    I have decided to start it off a few days after (as known updates require time, and on the top of that also need good internet connection , and my internet provider was facing some difficulties these days).I realized in few minutes that WLAN connection i snot working properly ( I use home router, operating together with Windows 7 standards).My netbook was not able to connect to my internet network and others stay ,,invisible,,to it.Ommiting such a small issue, I got to conclusion :if version of the ,,Starter,, system is so poor, I will purchuase Windows7 Pro hoping it will change everything.Unfortunately, it was not the way I wished.Despite the fact I have tried to make some free space in panel, WLAN card appeared useless.I admitt I work as a driver and WiFi connection is essential for my work when abroad, as roaming prices are too high.Because of this, I have decided to complain Booklet.It is Nokia so I will not be a problem.
    First I had to find out what are where, so I called Nokia Care.I was informed my problem will be solved on the spotin any Nokia Department ( Gliwice, Chorzow or Katowice).
    How surpriced was I when Nokia Department told me totally oposite- Booklet has to be sent to Warsaw.Unfortunetely Departments are open on the week days only, and I go back to Poland on Saturdays, I have no other option than complain it at the shop.
    I started realize how difficult it is going to be on 25/09/2010 ( did not expect it would be that difficult).Well, shop manager was ,,molesting ,,me asking why I want to complain Booklet in HIS shop, while there is Nokia Department in Gliwice.I was explaining it is my business why here, thefore I said because of my working hours ( he did not mind to mention any member of my family could complain but as I wish MY complain instead of two weeks at Nokia service, will take up to one month here!
    Complain was legallu based on warranty ( which I have regreted after).
    I searched fro any infromation about my Booklet on the EuroAGD website.On 15/10/2010 I made a call to the call center and I got informed my machine is back to the shop, and the website is not updated yet.I run to the shop the same day.Stresful situation again, as shop manager looked at me, at warranty papers and opened his eyes wide.He did not know anything about my Booklet, which supposed to return from service.I was waiting over 30 minutes, trying to figure out who an why would treat me lieke a fool.
    After all they found it!Staff members foung it somewhere in the storage…I signed the papers, checked the box and…
    here it started my agony with Regeneresis Company (Warsaw)!Here comes what I have read in service report:
    ,,Dear Costumer,
    During servicing your machine ,claimed problem did not appear…( and here comes the best part)…long term tests run by out technicians did not confirm the issue.Machine works.
    I have dropped my jews!How could it work???- standard router, 100% of signal strenght, available to half of my neighbourhood but I am not able to work on my machine 4 meters from the router!There was nothing I could at the time to confirm receiving my Booklet but with the complain due to the way of proceeding the complain.I have checked the system at home (angry) and all my nerves started to be relesed…: lond term tests- all 4 minutes in total, together withseconds it takes to switch it on and off!!!
    I called Nokia on Monday: here lady on the phone completely calm informed me, she has no clue about the repair, and I need to contact with the service.
    Ok, I wrote first email to get explaination from Regeneresis- NO REPLY.Second email-STILL NO REPLY!
    Then I emailed Nokia Poland and EuroAGD.
    Then I decided to make a request to the way of servicing ( by calling Regenersis) and again was ignored. Lady on the phone told me, I should contact them via email, as she does not know any detail of servicing and contact with technician i snot possible.
    When for the THIRD time I wrote to Regenersis, claiming if I do not not get the expertise of the tests of my card I will sue them in the court, finnaly I got the answer:
    ,, We hereby apologise for any inconvieniencedue to the wrong expertise, we are very sorry to hear about not detected problem in your Booklet.We kindly request to pass your machine to the service point again.
    So all good! But I did not wish to argue with shop manager again AND wait for the nest weeks.I called Regenersis Company one more time to contact person responsible for quality control ( it took me few long calls).
    Finally , when we started the conversation I requested that they will pick michine from me and on their own cost, as I do not have time either not in mood to deal with this as they made a mistake.
    Case was closed, and I hoped this time it will be sorted out.Ho wfool was I?!
    I have received the message from Nokia Care Poland on 26/10/2010:
    ,,Concerning complain nr 88/44/2010.
    Thank you for document sent on 15/10/2010 and also 15/10/2010.In return to your complain, according to thewarranty service repair, Booklet 3G IMEI nr 35823/1030270606 by Authorized Nokia Service Center- Regenersis ( Warsaw), we would like to inform , that due to the leak of documentation it is not possible to proceed with decision.
    We also explain, that all complains due to the terms of warranty are taken under consideration after receiving copy of purchuase together with service repair copy.To check your claim in details, please fax above documents on the number below: 0225419800 or via email [email protected].,,
    It is true I did not send any scans, but all information: reports numbers, dates and so on i sent, so in th eera of telephones, computers it i snot a problem to get interested if company is providing good service and if it is in the good name of Nokia.I have dropped this after all contact I had with Complain Department of Nokia Poland. I knew it had no sense.
    I have received next reply from EuroAGD on 29/10/2010:
    ,,Dear Sir,
    In return to your message, we inform, that expertise at service did not confirm any problems in work of machine.During tests any issues did not occur. We inform complain was due to the warranty, and warranty is a legal base responsible for censiderating and decisions taken to close the complain.Seller always bases on opinions of authorized warranty service.,,
    This was not surprise!but I was just disapointed that even they were not interested to do anything about it, even when I have presented them incompetence of the service (monitor screens, where system diary was shown!).
    Courier pick up the Booklet on 25/10/2010.
    At the time I sent all screens of analize of software monitoring LAN network as well as information about another problem in Booklet!!!
    Bios started to stop to workand the whole machine slown down so drastic that to start system off was taking over 5 minutes!
    Above person once a week to get any infromation.It was taking hours.
    Next call to Regenersis and Nokia Care Poland, and this time Nokia- lady accepted a complain based on IMEI number , but nothing happened after.
    Booklet came back to me at the beginning of November, enclosinf report saying:
    ,, We inform, during servicing the repair was run according to the producent procedure.Machine works.,,
    True, Bios was working- hard discexchenged, new preinstalled Windows7 Starter, but WLAN card still not working!!!This time it cuts signal untill -55dB,in some way this was a succes but internet connection was not possible.
    Booklet went again with courier to Warsaw on 29/11/2010.This time not to be repaired but for the expertise to replace machine fro the new one.Control Department said it will take no longer than 1,5 weeks ( optymistic- I thought).
    I contacted the same person on 13/12/2010.Unfortunetely a complain cannot be done this way, so I have to do this in person in the shop, and Regenersis will send back machine together with expertise, which is already done, but I cannot receive it ( available fro the seller only).I went to the shop on 19/12/2010.I was getting upset again as shop manager said he will not accept a complain without a Booklet!Explaining that machine will arrive ditect to them and that this fact should be added in documentation gave nothing.I got strict answer:Booklet has to be brought in person, then sent to service for the expertise and with new expertise and the Booklet back, they have 14 days to consider replacement- consider does not mean I got one.
    I called Regenersis again on 20/12/2010 and explained what and why.I got information Booklet will be send the same day, and as they will receive a request from the seller, they will also send expertise vi aregistered letter.Hoping that the parcel will arrive the next day, and considerating EuroAGD procedure, these 14 days means decision would be at the begining of 2011.How wrong was I?!
    On 23/12/2011,at 09:00 my Booklet was still on the shelf in Regenersis Company (Chmas begins tomorrow, I honestly doubt that Booklet I have bought in August 2010 will get back to me in January 2011!!!
    Today, on 28/12/2011Booklet was returned to EuroAGD and sent back to Regeneris Company. And I don’t know how long its going to take again.
    Best Regards.

    Yep **bleep** in Poland are not nice! I remember times when our tourist busses, cars and so on were robbered on your roads
    Ok, I had similar problem. Solved it just after one day without any strees and extra work - just changed my old wi-fi router (because I was able to connect to my neighbors wi-fi). Simple - just try other wi-fi. Don`t try to re-bild Nokia factory in Chine, try to use compliable router. 
    My noncompliable router was Netgear with only b/g networks. Don`t remember model.

  • Nokia Booklet 3G ATT Sim card

    Hi, I bought a refurbished Nokia Booklet 3G...I love it.  I am having a major problem though, in that I can't get unit to recognise SIM card. It works fine in my tablet, so it is activated.
    I have setup a WIFI connection, but I think its missing the driver to recognise the SIM card.
    Or maybe I have a faulty unit.
    Under "Change adapter settings"  there is no option for Broadband.....got me stumped.
    Any help much appreciated

    Hi tombrom,
    Thank you for your post and welcome.
    Have you looked at the user guide and support section on the Nokia website?
    Have a look at the following link:
    http://europe.nokia.com/support/product-support/booklet-3g
    And have look through the guide, How to and the FAQ section
    Also you can have look at the driver section here:
    http://europe.nokia.com/support/product-support/booklet-3g/software
    Try updating your device i.e the bios and the general software. All the tools and drivers required can be found in the above link.
    Have go through these updating where necessary and hopefully this will fix your issue.
    Let me know how you get on.
    Regards
    Raould_Duke
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • Nokia booklet is dead

    Hi, I do know, there is a small partition , and a big one with windows on the netbook. The small one seems to hold stuff need it to start. My son installed Ubuntu 10.10 with pausdlbo drivers, but took th total disk.....now it is dead.  What to do I do need any help Thank you all.........

    Hi greasergirl,
    Welcome to the Nokia Support Discussions,
    How unfortunate that your Nokia booklet has stopped working. The best option if the Booklet is not responding is to restore the Nokia booklet to it's factory settings. 
    This can simply be done by pressing F8.
    You need to press F8 before the operating system logo appears.
    In the Advanced Boot Options screen, use the arrow keys to select Advanced Boot
    Options > Repair your Computer.
    On the second screen choosing “ImageX recovery utility” should reset the system to factory defaults. Be sure to plug the Booklet 3G in.
    The entire process should take less than 30 minutes
    Hope this helps,
    John_Tesla

  • Nokia booklet 3g dead

    i was trying to update bios of my nokia booklet 3g and  power cut off and my device stop working and now its not turning on what to do?

    You need to contact Nokia care or a Nokia care point to see if they can help you.
    http://europe.nokia.com/support/contact-us
    You may also want to try asking on a forum that deals with PC hardware to see if the people there know how to recover from a failed bios update. You should be able to find forums like that by searching google.

  • Lenovo G400 doesnt boot

    Hi Guys
    my lenovo doesnt boot
    the installation was messed up
    windows was setup in drive d
    doesnt really matter
    is there something i can download to format the laptop
    it keeps on restarting
    doesnt even reach the login page
    thanks

    If the battery-LED is blinking fast (approx. 2 times per second) remove the battery, disconnect from power supply and press the power-button for 30 seconds. Then attach the power-supply  leave the battery off and try to poweron the notebook. Dead batteries also can lead to the symptoms you described.
    More hints:
    The Z60 is based on the ThinkPad T43. It also can get "Flexing". 
    Other causes may be contact with liquids in the past, damaged keyboard, crashed BIOS-update, a short in the USB-ports.
    To reset the CMOS you also can remove the BIOS-battery but take care: If BIOS-passwords had been set, you only can run the computer after entering the supervisor-password.
    My home-forum: http://www.thinkpad-forum.de
    Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
    My ThinkPad-Collection

  • Graphics card and motherboard bios

    i have recently purchased a hp pavillion p6 2371ea, trying to play a game i realised the new pc was not up to spec. having now bought a nividia gtx 650 ti im struggling to get it to work. the machine already has an intergrated graphics card in it. ive tried to find the right option in bios to disable the intergrated graphics card. the problem is the joshua h61-uatx motherboard doesnt have the option of the graphics card and the ability to disable it. any ideas as to how i can over come this issue?

    Here are the specs for your HP Pavilion p6-2371ea Desktop Computer. According to the specs, this model shipped with Windows 8 and a 300 watt power supply. To use the GTX 650 Ti you will need to upgrade the power supply to a 500 watt or 600 watt unit. The Corsair CX500 and CX600 are known to fir most HP comsumer desktop computer cases and come highly recommended. The next thing you need to do is DISABLE "Secure Boot" and ENABLE "Legacy Support" in the BIOS. Doing these things should resolve your issue.
    See THIS similar HP forum thread for conformation of your issue.
    Please send KUDOs
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Maybe you are looking for

  • One More Rant as to Fios features and "improvements"

    What kind of marketers does fios have that force their programmers to do such a horrid job? my wife and i got up this morning. beautiful sunny morning, warm for the first time. we turned on the tv, and saw a show we wanted, so i hit record... as she

  • XML Data Source using SSRS intgrated in ShaPoint

    I am trying to use an XML soap data source in my report and use the report in my SharePoint site but I get the following error: (SharePoint integration is configured as trusted site) we changed it to windows authentication but get errors on all repor

  • Chromium freezes randomly

    Hi, Ive noticed that sometimes chromium freezes. I cant press any buttons or anything. I can minimize or restore that window just fine but i cant do anything, so i have to kill chromium proccess. I think this started to happen after recent xorg updat

  • Is this upgrade OK?

    Want to upgrade my Imac running OS10.5.8 to the next best thing.  Will this slow down my mac? How far can I upgrade? What will change when I do this? This Mac was purchased March 2008.

  • CRS installation issue

    Hi, I have tried installing CRS in weblogic and displayed with below error in middle of installation. Could anyone provide me the solution to proceed further. -------DEPLOY PRODUCTION WITH A SERVER LOCK MANAGER TO WEBLOGIC ONLINE--------- Executing r