Nokia C-3 faulty camera + video issues

i bought this phone 3 days back... the image quality is very bad ..too dark n grains (noise)..i suspect dat d camera is faulty.....also the phone hangs up on playin video's ...what should i do ?? is replacement possible ??
plz help ...

ozair231 wrote:
i bought this phone 3 days back... the image quality is very bad ..too dark n grains (noise)..i suspect dat d camera is faulty.....also the phone hangs up on playin video's ...what should i do ?? is replacement possible ??
plz help ...
About the video playing issue: Upgrade to FW 04.60 and the issue should be fixed.
About the camera: You can't do anything about it, it's not just your camera a faulty one. It's all about the old, cheap camera module used, that takes you back to the dawn of cellphone cameras. All C3-00s make awful, grainy pictures and you can't do s**t about it..
"Running Windows on a Core i7 is like having a brand new Porsche,
but only be able to drive backwards with the handbrake on."

Similar Messages

Dell Venue 11 Pro Camera/Video Issue

Hello All!I have some Dell Venue Pro 11 tablets running Windows 8.1. When I got them hooked up to our domain, I tried to take video and it was choppy. I realized that the camera roll was actually on one of our servers. Thererfore, there was a delay when retrieving the video from the server to the tablet. The solution was to move the camera roll to the C: drive on the device. And bam! It worked.Now I am encountering another problem: when I am not connected to a network or wifi, I open the camera app and get the message: We can't get to the camera roll right now, Something went wrong while accessing the camera roll. I cannot figure out why it would have a problem finding it if I have it locally stored on the C: drive under Public Desktop.If anyone can help with this, I would really appreciate it!John HeimIT Support TechBerks Counseling...
This topic first appeared in the Spiceworks Community

Does not appear they carry them at this time you may have better luck suggesting it here:
http://forums.bestbuy.com/t5/Best-Buy-IdeaX/idb-p/IdeaX/status-key/New
I am not affiliated with Best Buy nor have I ever been employed by Best Buy. All of my thoughts and posts are of my own opinion and personal experience.
I may not always know the right answer, but I will always tell you what I do know. I also do free computer analysis and consultation via private message.

Camera video issue

I have a new iPad Air OS 7.1.
I am trying to make a video but the video button will not select.
Anyone have any ideas?
Thanks,
Jeff

this one gets me every time ... you have to swipe between the settings, as if the settings are a list and you are trying to line the one you want up with the dot

Have two iphone 5s with ios 7.0.2 camera video does not work. Anyone else with this issue? Anyone have a fix?

Own two iphone 5s with ios 7.0.2 loaded. Both phones do not allow camera video to start. Anyone else with this issue? Any suggestions how to correct?

Hello markittwo,
Thank you for details about the issue you are experiencing with recording video after upgrading to iOS 7.
The first thing I recommend is quitting and relaunching the applications on your iPhones:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
You can find the full article here:
iOS: Force an app to close
http://support.apple.com/kb/HT5137
If you are still seeing the same issue after quitting and relaunching the Camera app, I recommend restarting your phones and then resetting if recording video still not working:
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
Note: Reset your device only if you are unable to restart it.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
You can find the full article here:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the issue persists, the last thing I recommend is backing up and restoring your iPhones:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Thank you for using Apple Support Communities.
Best,
Sheila M.

Ios 7.1 Update Issue. Camera Video not capturing Audio

Hello Every One, I have Updated ios 7.1 after the Update the Camera Video is not capturing the audio.Please help me with the SolutionIo

Hi Aniruuthan,
Thanks for visiting Apple Support Communities.
If your iPhone is not recording sound along with video, I recommend these troubleshooting steps:
Make sure nothing is plugged in to the jack connector.
Make sure nothing is blocking any of the microphones (see the pictures below to locate the microphones on your device)
Make sure none of the microphones is obstructed by dirt or debris.
Turn the iPhone off and then on.
If necessary, find general iPhone hardware troubleshooting suggestions.
For further assistance, contact Apple Support.
You can find the article with these steps here:
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Best Regards,
Jeremy

Multi Cam Flicker Issue - Premiere Pro CC 2014

Multi Cam Flicker Issue - Premiere Pro CC 2014 can any one help me pls

Hi,
This might help :
Go to File > Project Settings > General and change the Video Renderer to Mercury Playback Engine software only. Click OK and select Delete Previews.
Thanks,
Rameez

After upgrading to mountain lion, my ip camera video feeds time out

I've been using my iMacs for a few years to monitor six ip Camera video feeds. The cameras I use are both FOSCAM and AXIS brands. I've used a few third party software solutions to do the monitoring, but I could also always use Safari to access a camera at a time by putting that camera's IP address in the address field and logging into the camera.
After upgrading to Mountain Lion, my video feeds started timing out when using DComplex's IP Camera Viewer, so I thought initially it was strictly an issue with that third party app. However, I then logged into my cameras using Safari and they timed out as well. Similarly, when using Axis Camera viewer, my video feeds would time out. It seems as whatever the issue, it does not affect Firefox, because I can still login and monitor 1 feed at a time using that browser without any timeout issues, and for some odd reason, the FOSCAM only program uFoscam works, but the problem for me with that app is that it only works with Foscam, and not the Axis cameras (besides it's an inferior program to IP Camera Viewer in my opinion as well).
Has anyone encountered this problem and come up with a solution? I'm thinking it's some sort of plugin or video codec problem, but it's well above my paygrade to figure it out.

I'm having the same problem with both my Vivotek wired network camera and Panasonic wireless network cameras. At first I thought this was an issue with the video framework in Mountain Lion, but if Firefox is working (I haven't tried it yet), it sounds like it may be an objective-c video library that has been changed. It's possible Firefox is using an objective-c interface that calls an objective-c function that isn't called by Safari or IP Camera Viewer, etc., (possibly a function that is on its way to be deprecated) or Firefox could use it's own library that directly calls the video framework.
Could be the Mountain Lion objective-c framework has a buffering issue.
Since this is occuring in both 3rd party software and Apple software, it sounds like it's an Apple issue. 3rd party applications typically utilize the Apple Developer objective-c frameworks to access video frameworks/libraries (for example, MJPEG). Thus, contacting 3rd party developers may not solve the situation (unless they can figure out a temporary bandaid--possibly figuring out the video framework call that Firefox uses and patching their software to do the same (not a simple task), but could still provide more feedback to Apple via their developer status.
Has anyone attempted to record from their cameras via iMovie or Final Cut Pro X HD? I will try mine later tonight to see if it records the hanging. If it does, then it's looking more and more like Apple's the culprit.
My suggestion is for everyone to file a bug report via http://www.apple.com/feedback/macosx.html

Video issues in mac os 10.6.4 and windows 7 64x

To start with, my computer is the late 2008 model Imac, has 3g of memory, and wasn't experiencing any video problems until earlier this month. I've already had it serviced, and was told that the issue was resolved, and was unrelated to hardware. Fifteen minutes after repair and setup, the exact same symptoms occur.
I'm thinking, Ok, perhaps this is a bad install of windows, since it happened in a windows program (everquest 2, an online game), and rebooted into Mac. Almost immediately, I saw video problems (snow, pixels, lines, distortion)on the mac side, which had occurred with the windows side.
My husband is angry, I'm angry, so I decide that I'm going to trash everything and start off completely fresh. I intended to reinstall mac 10.6.4 after erasing everything, so I removed the windows partition, and attempted to reinstall snow leapard, without using the original leapard disc that came with the system. I didn't realize until too late that I had forgotten to erase the original os, but I figured I'd see if there were any problems and go from there. I had no initial problems with the install of either os (mac or windows), except to note that I couldn't install the apple software updates on the windows side. I was able to fully update the mac side before attempting any installation of the windows os.
I started having video problems really quickly in the windows side after the full installation and update, but the system disabled the initial nvidia drivers and went to plug and play drivers. The only thing that displayed any further problems was the ISight camera, but that was to be expected without the apple updates.
I did read the bootcamp manual afterwards, and saw that my IMac, being an earlier version, might not properly install bootcamp drivers for windows 7 64x, although we had successfully located and manually installed the drivers earlier when first installing windows 7 64x. Keep in mind, I'd had the os installed for several months without any video problems, and in fact, it worked like a dream in both os after the computer had a previous repair of the hard drive, sound card, and logic board.
Anyway, to continue, after the video symptoms occurred on windows, I switched back over to mac to look for and install a video firmware download that I had located through these same forums. I had to change os because it was a dmg, so I did so. Now, I still had the snow leapard install disc in the computer, so that's the first thing I saw on the screen when booting into mac. I immediately started also seeing the pixels and some distortion, but it stopped briefly. I tried bringing up Firefox to get to the download, but the computer froze (showed the little round ball)and wouldn't respond further. I tried several reboots, and could usually at least get into snow leapard, but the computer froze each time.
Finally, after several attempts, the computer won't boot into either os, and won't go into the install disc either. I'm completely at a loss, because I'm told this IS NOT a hardware issue, and the problem was resolved with simply resetting everything. The problem was NOT resolved with that reset, because I'm able to reproduce this issue consistently with multiple reboots, and have even recorded it with a camera I have. I'm at my wit's end, because I'm on a fixed income, and this costs me time and money I just don't have. It's caused me to get behind on one of my bills, because I have to have a computer, and further repairs, while covered under warranty, are going to cost me further money to get to and from the service center. Not to mention the fact that it's going to take another month for me to wait for my money to become available so that I can pay for the ride back and forth for the repair.
Anyone, anyone at all, have any suggestions that may help? I have access to another computer, and can try using that computer to help me boot the other computer up, if I know how. Please, this is so frustrating to me, so I'm hoping someone can suggest something that may help.
I know I mentioned in the post what type of video issues I'm experiencing, but I figured I'd reiterate to make it easy. The computer will display a distorted image on bootup, like a pixelated off-center image. You know, kinda like 2 punch cards held up to each other, with the same holes, but off center. You also get snow, when able to boot up, with the screen sometimes showing half the screen, flickering. Like the screen is broken, but it's not even scratched. And it's not all the time either, if it was, I would think maybe an internal screen was broken or cracked (I've worked tech support for devices with internal screens, so I understand you can have a perfectly good outer screen, but a cracked inner screen). Right now, on bootup, I get that punch card effect, then the screen goes blank. I should mention that sometimes the system will show that, but then boot into windows with no immediate distortion, but will show distortion in the mac side if I'm able to boot into snow leapard. Hope this information helps someone give me an answer that helps.

To start with, my computer is the late 2008 model Imac, has 3g of memory …
I'm assuming you mean the Early 2008 iMac since there is no "late 2008" one. AFAIK, it came with 2 GB of RAM standard & the common BTO option would have been 4 GB, so can we assume that you have installed an aftermarket memory module to get to 3 GB?
I've already had it serviced, and was told that the issue was resolved, and was unrelated to hardware. Fifteen minutes after repair and setup, the exact same symptoms occur.
What repair and setup? Is this something you did after getting the iMac back from service? If so, what exactly did you do?
I had no initial problems with the install of either os (mac or windows), except to note that I couldn't install the apple software updates on the windows side.
Do you mean the Windows drivers or something else? Did you follow the Bootcamp install procedure exactly when reinstalling Windows or not?
I switched back over to mac to look for and install a video firmware download that I had located through these same forums.
What video firmware download do you mean? AKAIK, there are none for early 2008 iMacs.
No offense intended, but it is hard to understand exactly what you have done because while you mention much, you don't say a lot about the specifics for a lot of that. In general, it is best to concentrate on those things & keep the commentary to a minimum.

Nokia Lumia 1020 - Pro Cam switching to Panorama

Nokia Pro Cam used to have a circle with 2 arrows at the bottom right of the screen to switch to Panorama or Smart Cam. And there was the camera button and video button on the right middle of the screen. Now, there are 3 buttons on the right middle - the camera, video, and smart cam. And no way to find Panorama. Any idea what happened and how I can get the button to switch between modes back.

hi mate, the arrow is no longer there but you can tap on the three dots and then tap on Lenses to get to the Panorama app.

Lightroom 4.4 video issues, I think it may be a windows 8 issue.

I am not sure when this started happening or what has changed. I went to import some video and in the import dialog box all my video files show "Preview unavailable for this file" in the thumbnail in the grid view. And if I try to import them i get a dialog box with a message that says Import Results > Some import operations were not performed. > There is a problem with the video file (1) > [Filename].AVI
I am currently using windows 8 and I have imported video to this catalog before from the same camera. The video plays fine in the video players(windows media player, quicktime, and the new video app on windows 8 that is the default player in the OS).
I went throught the http://helpx.adobe.com/lightroom/kb/troubleshoot-video-issues-lightroo m-4.html and did all those suggestions. I am now turning to the forums before I reach out to support.
Has anyone else run into this issue or a simililar one that may be able to give me a workaround or solution?
I am a cloud subscriber and all my programs are up to date. Windows is current, all players are current, and this specific catalog has .AVI files in it from the same camera and the firmware on the camera has never been updated since I started shooting video.
Thanks,
Alex

I had the same problem -- also on Windows 8. I was trying to import .MOV files from an Olympus OM-D E-M5 into Lightroom and got the error you mentioned.
I believe it was a problem with my QuickTime installation. I was using an unofficial distribution of QuickTime called "QT Lite", and apparently it doesn't play well with Lightroom. Uninstalled that, installed the latest QuickTime and video imports started to work.
Unfortunately I then ran into this other problem, which sometimes causes video editing to fail: http://forums.adobe.com/thread/972420

Nokia N97 - Camers pictures and videos no longer i...

As the title says all my images and videos are now no longer within the captured folder when you go into photo's, I have tried deleting all of the _PAlbTN folders, also factory reset the device, still nothing there, any ideas on what I can do to get these back in the captured folder?
Otherwise it seems a pointless feature if every firmware update you lose all the data captured over the months since the last update, I have also tried copying all in the camera album over to the PC and put back onto the phone mass memory.
It's doing my head in now, I have trawled the forums to find information but nothing.. I have a lot of other items on my mass memory which I have accumilated from over the years and transferred to each new phone I get, got something in the region of 2500 images and videos, on the mass memory stored in the traditional way, where E is the mass memory etc:
E:\Images\200610\200610A0
Instead of the new way i.e.
E:\Images\Camera\200910\200910A0
Do the files (images and videos) get assigned new tags to allow it to identify them as being taken on the device, my viewby month folder is also not working.
Any help would be appreciated.

Great that the new firmware helped at least one user
Right, the Nokia Photo Browser doesnt show videos, since its a photo browser I wonder why the native photo application shows videos - someone should fix that bug or rename the application.
I browse and watch videos with the file manager.
You can exit the Nokia Photo Browser. Touch the screen and hold, after one or two seconds you get a menu popup, there you can do some things and exit the app. Additionally there are much more features than you would expect. If you opened a photo, you can keep the screen touched to get a magnifier. You also can double-touch it so zoom in.
Nokia Bug Tracking System @ http://dev.an3k.de/bugtracker/

Faulty camera, trackball & speaker on my 9300 curve

I took out a contract last Aug with Vodacom SA n this is my second fone since. The faults r the same with the exception of the now faulty camera. Some of the pics are all pink/purple with image only on top.<br>The fone constantly switches off and/or reboot with/out software verification. I really lurv my fone but I cnt handle these silly hickups. HELP!<br>What does it mean when they replace my "new" fone with a refurbished 1?<br>Shud I demand a new fone or shud I switch fones?

Hi Karebearek and welcome to the Blackberry Forums
Try resetting the device, with the phone turn on, take out the battery for 30 seconds and install it again, let me know
Thanks
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

HT4623 I have just finished the upgradation to an iOS 6.1.3 and have lost sound in Music and Videos. I am using an iPhone 4S. My iPhone doesn't produce sound when playing Youtube or local camera videos. However ringtones and notifications sound works fine

I have just finished the upgradation to an iOS 6.1.3 and have lost sound in Music and Videos. I am using an iPhone 4S. My iPhone doesn't produce sound when playing Youtube or local camera videos. However ringtones and notifications sound works fine.It is quite strange as well. Have you encountered this issue before?If yes then what's the solution?

I had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot!

Video issues after update - 15" Macbook Pro (Late 2011)

I recently ran some updates for my mac and ever since then, I've been having video issues where my screen is showing horizontal lines. The lines come and go as I make changes to the screen (like minimizing a window) and they came in go and varying degrees of badness. Icons will also start missing unless I hover over them or make some other video change in that area of the screen.
It could be a coincidence that it occurred after making the updates, but it is worth noting.
OS: 10.7.4
Model: 15" 2.2Ghz Intel Core i7, 4 GB, Late-2011
Graphics: AMD Radeon HD 6750M 512MB
Possibly related:
https://discussions.apple.com/message/2652280#2652280#2652280
Why is this happening?

Users with the same issue:
http://www.ifixit.com/Answers/View/23725/My+MacBook+Pro+17+freezes+and+lines+in+ screen!
https://discussions.apple.com/thread/1609243?start=0&tstart=0
https://discussions.apple.com/thread/2457853?start=0&tstart=0
Anyone?

Blqack screen, no chime and it's not a video issue

Hi, I got a big problem and I will like to know what your thinking about.
When I try to open my Intel-Based IMac, there's no video. The screen is black but the light came on and the drive and the fan make a sound. The keyboard and the mouse doesnt work and the computer doesnt make a chime.
I tried to find some info on the website of apple
http://docs.info.apple.com/article.html?artnum=300537
but it's not the same problem. The fan and the drive is working but I dont have the chime. Then it's not only a video issue, it's not only the display who is not working because the mouse and the keyboard doesn't work and the chime didn't came on.
It's the second time it do that. I didn't install a new software for the last week. The fist time, the technical support told me it was probably a software issue. After a while, I was able to turn on my computer and I made every update. After that, I made a reboot and everything worked. I taught it was ok and I turned off my computer. After the night, the same problem came on. I tried again to turn on and nothing worked. Black screen, no keyboard, no mouse, light turn on, the drive and cd make a sound and no chime. And this time, I was not able to turn on after many reboot with the power button.
I think it's a problem with the computer himself and not a software issue but I dont want to send my computer to a apple store before to confirm it. I need my computer as fast as I can and I don't have a retail neer of my home.

Your symptoms, though not exactly the same, seem to indicate a problem with your RAM. The startup chime is a signal that your Mac has passed the Power On Self Test and suitable RAM was found. No startup chime is usually a sign of bad or poorly seated RAM.
Intel-based Mac Power On Self Test RAM error codes
I would start by removing the RAM modules and test them one at a time in each of the RAM slots to rule out bad RAM or a bad slot. Then seat both modules securely.
Intel-based iMac: Installing and replacing memory (RAM)

Nokia C-3 faulty camera + video issues

Similar Messages

Maybe you are looking for