Nokia c 6 is not starting in new 10 days old piece

i have buy a mobile nokia c6 just 10 days ago
it started giving me peoblem lots at the begining of the day 1
its got hang 3 to 5 times a day i have to remove battery number of times
now the new problem arises my cell started becomeing hot at the battery and at battery bottom portion of cell
now its not woking i just get black screen and cel get swtched off itself no display other than that black display
where shold i replace it or what shold i do plz help
i guess i have lost my hard earned money
SHARING IS CARING

i got nokia c6 ,white on last month feb 13 th utter flap mobile from nokia i got attracted my model appearence internally un happy with with brand
battery :it is getting too hot after charging
sound even it is 80 cc volume we cannot hear the ring tone when the phone is kept in room
touch :very very poor we have to beat on the screen some times to enter that option some time i think it si not the touch phone from nokia touch beat from nokia
screen:when i press back or option button the screen is getting half first completes full screen after 2 or 3 seconds
applications:when im using one application when enters toother application it shows memory is full close some applications even photos too will not open
hardware:back door for battery shakes dont fit properly slide for qwerty key board shakes
at finally i thought not to go for nokia next time.
it concentrated only on apperences of mobiles. internalli it is failure one

Similar Messages

Will not start on New Install. Opening goes straight to Crash reporter

Will not start on New Install. Clicking on icon does not open a window and goes straight to Crash reporter. I cannot access a window to try to open in safe mode (unless there is another method than outlined in the help article).
I run Windows XP and trying to install the latest 15.0.1 version. Before install, I did disable my Symantic virus protection. I have never used Firefox and would like to try it, but I'm having little success so far to even get started.
Please let me know if anyone has any other ideas or need more information from me.

hello Singyt, the bug report associated to this kind of crash indicates that it might be a malware related issue.
your crash report also shows a file named "urixalog.dll", which doesn't turn up any search hits on google, which is also slightly suspicious. could you search for that file on your pc and upload it to a site like virustotal.com in order to analyze it.
please do a full scan of your system with the security software already in place and/or a different tool like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes].
[[Troubleshoot Firefox issues caused by malware]]
edit: the bug report also suggests that a monitoring program named spector pro/360/... which essentially acts like malware, might cause the issue. in case you have that installed please remove it. otherwise [https://support.mozilla.org/en-US/kb/Firefox%20crashes%20when%20you%20open%20it#w_backdoor-ulrbot-c here] would be a removal guide for urixalog.dll

I installed the new version of LIghtroom (2015) from Creative Cloud. Creative Cloud says I successfully installed the new version. However, the shortcut icon that was installed does not start the new version. I've also gone to the properties link itsel

I installed the new version of LIghtroom (2015) from Creative Cloud. Creative Cloud says I successfully installed the new version. However, the shortcut icon that was installed does not start the new version. I've also gone to the properties link itself but, no success in starting. How do I launch the new version?

Thank you, toinimj59. I did this part and the installation completed (apparently it didn't earlier--included an acceptance of the standard terms and conditions...
Solution 1: Sign out from Creative Cloud desktop app and sign back in
Sign out from, and back in to, the Creative Cloud desktop app. Click here for instructions
Launch Lightroom.

Adobe Scout issue: not starting a new session for loaded SWFs

We have an issue with Adobe Scout. It does not listen (doesn't start a new session like it sould) for a SWF loaded by another (main) SWF. The SWFs have advanced telemetry enabled and the setup is correct as described inhttp://www.adobe.com/devnet/scout/articles/adobe-scout-getting-started .html. Please help
Thank you
I am using Win 7 64-bit, the latest versions of Adobe Scout and Flash Player, Chrome 32 / IE 11.
Also I have made sure that the Scout server is listening, as descibed in the article linked above: Verify that the Scout server listening. Open Scout, and then type localhost:7934 into your web browser. It should respond quickly with "server dropped connection", "no data received", or something similar (since Scout is not an HTTP server). Scout should show the error message "can't start a session because the telemetry data isn't valid". If the browser stalls for a long time, and then comes back with "server not found" or something similar, then the socket isn't working.

The correct answer is here: http://stackoverflow.com/questions/21827477/adobe-scout-is-not-starting-a-new-session-for- loaded-swfs

HT4061 I bought a new Iphone and when I started the new one, the old is disabled

I´ve just bought a new Iphone 5c, but I still have the 3G and would like to keep it running with a different tel number.
But as soon as I started the new Iphone the old one started to to accept my passcode and now is disabled.
How can I unlock and back it up.:?

Typically, when someone replaces an iPhone with a newer model and uses the same telephone number, the old iPhone's telephone connection is disabled, but the iPhone still works (nuch like an iPod Touch). Is that your situation?

My bran new 4 day old IPod Touch 32GB just slipped onto my table and the glass on front has cracked bad - how do I get this fixed?

Hello
My New 4 day old IPod Touch 32 GB just slipped onto my kitchen table and the glass cracked - is it still under any warranty and how much will it cost to repair?

Accidental damage is not covered under the limited manufacturer's warranty, which is a year from the purchase date.
If you live near an Apple store, make an appointment.

Premiere Elements 12 will not start a new project

I loaded Premiere Elements 12 on my...
64bit HP Laptop Dv7
Intel core i7
Windows 7
Radeon Graphics (HD 6770m)
updated Quicktime
updated display drivers as requested when first installed.
reloaded PE 12
Started PE12 but when i click Video Editor and then select New Project the button shows the purple and black lines for about a minute and then stops and nothing happens
I have almost given up. I have been trying to load this program on my pc for 5 days. Nothing but problems. I have asked pc gurus at work and no one has a clue what could be wrong.
Why will Adobe Premiere Elements 12 not start on my laptop?
by the way there is no BadDrivers.txt file to delete that i can find...
Does anyone have a clue as to why the application would not start?

Rotary
It is late where I am so I will give you some things to work on.
Premiere Elements does not fare well with 2 video cards/graphics cards. Have you disabled the Intel and observed the consequences?
Determine if the problem is there with and without the antivirus disabled.
BadDrivers.txt file
Local Disk C
Program Data
Adobe
Premiere Elements
in the Premiere Elements Folder will be one file and some folders. You do not want the folders or what is in them. You want that file which is the BadDrivers.txt file. Be sure to be working with Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path shown. Be aware that after you open the program again after the file deletion, the program will generate a new BadDrivers.txt file but by that time the problem should be gone (hopefully).
I would probably be going after the Adobe Premiere Elements Prefs file -
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
12.0
and in the 12.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then delete the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists.
Better yet....check out the information in the following blog posts
http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
ATR Premiere Elements Troubleshooting: PE12: Sign In Failure (Connect to Internet or Fix Computer Clock)
We will be watching for your progress in the light of day.
Thank you.
ATR

Aperture 3.6 will not start after new install

Rebuilt my Mac Mini with a clean install of Yosemite 10.10.2 and reinstalled all my apps. Downloaded and installed Aperture from the App Store but it will not start. No crash, just nothing. Does its animated thing when double-clicked in Finder, and goes through the usual launch action from Launchpad, but then nothing. No icon in the dock, does not appear (even momentarily) in Activity Monitor. I have Final Cut Express installed and have seen other launch issues with this combo, but they all seem to result in an Aperture crash. Any ideas?

Did you install Final Cut Express after you installed MacOS X? Then install Yosemite again on top of the current system, without reinstalling the applications. See: Aperture 3.x: Aperture unexpectedly quits if Final Cut Express 4 is installed
Aperture does not work after installing FCE, but if you reinstall MacOS X after installing FCE, both Aperture and Final Cut Express sgizld work.
The download of Aperture may be incomplete. If reinstalling the system does not solve this, trash Aperture and download again.

"System Update could not start properly" - New error just started (WinXP SP3)

I can no longer run System Update; it displays the splash screen, then a small window pops up with the above error message. I just ran it last a day or two ago, and it installed a few things; since then I have also run Microsoft Update and it also installed a few things, which I backed out one at a time (except for the malicious software removal updates)--all to no avail. Anyone else seen this, any suggestions?
Thanks,
Jonathan
--T61 (6460-8VU) - WinXP SP3, all the latest patches (except for KB961260, which is still backed out); .NETFramework 3.5 SP1

Hello,
I have reinstalled the system update after I did clean and download the last version from Lenovo website but still have the same pop up message says: Syystem Update could not start properly.
what's wrong??????

Nokia lumia 520 will not start

hi all not sure if anyone can help i just brought a brand new lumia 520 i have come hope come home turned it on and its just saying Nokia can anyone help please

Hi daisydoll,
Thank you for posting and welcome to the Nokia Support Discussions!
When did the problem start to happen? Did something happen to your phone prior to this concern? Have you tried removing the back cover and battery and putting it back in? Is your phone's software up-to-date? When was the last time that you have charged your phone? Is there any charging indicator whenever the phone is connected to the charger.
Charge the phone first until it gets enough battery then try rebooting the phone again by pressing and holding both the 'volume down' and 'power key' until the phone vibrates. You may try removing the battery, put it back in and make sure that the back cover is properly inserted. Try to use different battery and charger to further isolate the case.
If the above troubleshooting will not work, then you may consider visiting the nearest Care point in your place to have your phone evaluated.
Looking forward to hear a feedback from you.

ITunes and Quicktime will not start on new PC using Vista

Hi everyone,
I just bought a new PC using Vista "Home Premium" edition. No previous version of iTunes on PC. I downladed iTunes 7.6. When I try to start iTunes Windows error msg says "iTunes has stopped working check on-line for a solution and close the program". When I click on the link provided it just brings me back to the same page where I already downloaded iTunes 7.6! When I try to start Quicktime I get the same error msg.
Any suggestions on how to fix the problem?
Thank-you in advance for your help.
Nat

I had the exact same problem. Just use this article:
http://support.apple.com/kb/TS1717
What ended up happening for me was that it was a user-specific problem. For that, just follow these steps (taken from the above article):
Remove iTunes Plug-ins
third-party iTunes plug-ins can cause many issues, particularly if the plug-in has not been updated to be compatible with new versions of iTunes. iTunes plug-ins are located in the following location:
C:\Users\username\AppData\Roaming\Apple Computer\iTunes\iTunes Plug-ins
Remove iTunes Preference files
Some of the files that iTunes uses to store settings and preferences may be corrupt and cause issues. iTunes has two folders where preferences are saved. Move one of them to the desktop and test to see if the issue persists. If it does, move it back and remove the second folder. The location for the two preference folders are:
C:\Users\username\AppData\Local\Apple Computer\iTunes
C:\Users\username\AppData\Roaming\Apple Computer\iTunes
Hope this helps.

CS5 does not start from new SSD disc

I have recently exchanged my HDD with a new SSD disc on a Macbook Pro running Mavericks. I have put an image of my original disc on the SSD and after installation everything runs fine as it should, except of Illustrator CS5, which doesn't even start up.
I get the following error:
Adobe Illustrator cannot be opened because of a problem.
Check with the developer to make sure Adobe Illustrator works with this version of OS X. You may need to reinstall the application. Be sure to install any available updates for the application and OS X.
If I actually plug in my old HDD as USB disc and start CS5 there, it runs no problem. Hence it doesn't seem to be a problem of the OS (anyway, it worked fine before changing the discs).
The detailed crash report follows:
Process:
Adobe Illustrator [565]
Path:
/Users/USER/Desktop/*/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Identifier:
com.adobe.illustrator
Version:
Code Type:
X86 (Native)
Parent Process: launchd [150]
Responsible:
Adobe Illustrator [565]
User ID:
501
Date/Time:
2014-01-20 20:03:01.639 +0100
OS Version:
Mac OS X 10.9.1 (13B42)
Report Version: 11
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/AdobeBIBUtils.framework/Versions/A/AdobeBIBUtils
Referenced from: /Users/USER/Desktop/*/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Reason: image not found
Binary Images:
0x8fe14000 - 0x8fe46417 dyld (239.3) <4B280BB1-55F8-313F-86A6-8ADD644ED69E> /usr/lib/dyld
0x94c04000 - 0x94c12ff7 libz.1.dylib (53) <858B4D9F-D87E-3D81-B07A-DF9632BD185F> /usr/lib/libz.1.dylib
0x99ba0000 - 0x99ba0fff com.apple.Carbon (154 - 157) <6E680560-FD53-3C00-BDF7-7AFA28747DC8> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i5, 2.4 GHz, 8 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334348302D4346382020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334348302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Network Service: GFZVPN, IPSec, utun0
Serial ATA Device: Samsung SSD 840 PRO Series, 512,11 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: Hub
USB Device: AS2105
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Internal Memory Card Reader
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Hub
USB Device: Built-in iSight
USB Device: IR Receiver
Thunderbolt Bus:
Anybody understands what the problem could be?

Uninstall AI and reinstall from the original disks. Something got munched in the imaging. Adobe apps are not fond of such changes.

X not starting on new installation

Hello all! today I decided to try arch for the first time. THe installation went well, but now i cannot get x to start. I have read through most of the xorg wiki and cannot find a way to solve my problem. Here is the crash log:
http://bpaste.net/show/126183/
I've hit a road block and do not know what to do. any help would be great.
thanks a lot,
-Jrad

Scimmia wrote:What video card? Have you installed the drivers?
Sorry I did not post it, I am kinda new to this. I have an Intel video card and I have installed the correct drivers

Nokia Software updater is not recogonizing the new...

I can see so mant thread and discussion about the new firmware for nokia n95 8GB(RM-320), according to that the new firmware version is v35, but when i use my S/W updater its showing the update version as V31(the same i have in my Smartphone).
Can any one help me, is this update is not yet release to India or any issues with updater???
Thanks in advance.

Firmware are given to public according to the location of each ones, i mean according to the country. Saying so if you are in Canada you might have a different firmware version with someone located in Hong Kong. Also your phone have a number inside that help the SW Updater undertake your location and that number inside your phone will not allow you to have another location updates unless you change that code, note that changing that code can also change the displayed languages on your phone all depending on which country code you put inside your phone, so if your S/W updater its showing the update version as V31(the same i have in my Smartphone) it mean that the latest software update for your phone according to the code inside your phone is still version V31; and the version 35 belong to some other countries. Now check again to find out what country can download the version 35, and if you satisfy with the languages provided by that firmware 35 find the nokia country code for your nokia and input it in your phone and finally run your software updater again. Press the star icon on the left if my post help you.

EPMA Server not starting for New Installation of EPM 11.1.2.2.0

Hi i am having problem of EPMA Server not getting started .... i installed many times and configured but problem still persists that's first time i am installing the EPM suite so plz bear me for any stupid questions.....
I am using :
Oracle Version: 11.2.0.1.0
EPM Version: 11.1.2.2.0
Note:
1. While installing Oracle Client i used first option to install "Oracle Instant Client " with minimum configuration.
2. While configuring Database in " EPM System Configurator" window...in Server name it was not taking exact server name instead was taking "localhost". So i used localhost...Can this be an issue?
In EPM Configuration I got message that "Oracle data access client not installed" is it related to EPM Server.
I am confused about installation is "ODAC" and "Oracle Data Access Client" are same or different. As i am not getting "Oracle Data Access Client" to download.
I just want " Essbase , Planning and Reporting Applications".
Please do help as i need to solve this problem urgently.
Thanks in Advance.
-Sushil

Is this a personal install of the EPM? If so you may need to install the MS Loopback adaptor for Oracle db first
For EPMA it may be easier just to install the full Oracle Client as it should work then.
Cheers
John
http://john-goodwin.blogspot.com/

Nokia c 6 is not starting in new 10 days old piece

Similar Messages

Maybe you are looking for