Nokia C1-02 Not identifying caller (CLI problem)

Hi everyone, I have bought Nokia c1-02 v5.40
Some Numbers are saved in phonebook with country code +923xx and some are saved without country code 03xx.
When some caller calls me, his name is not displayed (identified) but when this caller sends me sms, then his name is displayed ..... and some callers names are displayed during call but not displayed in sms.
any solution to this problem?
Thanks

Let me re-explain everything again
I have bought Nokia c1-02 (China Mobile) from CHINA which was on software v5.40 and now i have updated to v6.15. I am now in Pakistan now. The problem which i am facing is:
1. I have saved a person "Peter" with mobile number "+923xxxxxxxxx". Now
when Peter calls me, his name appears on my mobile screen but when Peter
sends me sms, then his name is not displayed in incoming sms.
2. I have saved another person "Ali" with mobile number "03xxxxxxxxx". Now
when Ali calls me, his name doesn't appears on my mobile screen but when
Ali sends me sms, then his name is displayed in incoming sms.
3. But When i save a person "Steve" with 02 mobile numbers "+923xxxxxxxxx"
& "03xxxxxxxxx" , Name of Steve is displayed both on incoming call as well
as sms.
I hope you understand my problem as it is not duplicate contacts issue.
Any solution to my problem?

Similar Messages

  • Nokia E5 - Can not hear Caller after disconnecting...

    When i disconnect the phone from the VW car kit, i can not hear a caller when they ring me, the phone does have the car symbol on the bottom status line and the only way to fix the problem is to restart the phone everytime i disconnect from my car kit....not ideal !!!
    Any ideas on why it seem sto think it still connected ?
    Regards
    mark.

    Okay! If you have the same problem, you end all runing programs in the taskbar. reset the phone several times. i can hear the caller after that. hope that the problem comes not back.
    There ist the Problem with the battery!
    Sincerley
    Alex Fromm

  • Nokia N8 with Nokia Belle does not recognize heads...

    My headset (WH-701) is no longer recognized by my nokia N8 after I had updated to nokia belle. I first have to put my headset into the 3,5 mm AV connector before being recognized, and even then the headset may stop working after a few minutes. Once the headphone is working I still cannot make use of the (music)buttons on the headset (louder, softer, next, previous, etc.) Please can someone help with this problem? There must be a solution for this? I am using the headphones every day.
    I know that already started on several topics, but Nokia has still not responded to this problem!
    Thanks in advance for your help 

    hi there mate,
    if you are having problems with your phone, you can try checking via the phone itself or via Nokia Suite, if there are any firmware updates available, and to please update to the latest version offered. If there are no updates, try re-installing your current firmware, and if that doesn't work, then Restoring to factory settings. Failing that, perform a three-finger hard reset and if that doesn't work either, then you will need to take your phone to your local Nokia Care point for them to inspect.
    to locate local Nokia care: http://nokia.com/support
    Remember to backup all personal data first

  • Nokia N8 Belle does not show caller name

    I can't get my phone to show names for people that are calling, I know there are already loads of topics about this, but none of the suggestions could fix my problem.
    Keyfacts:
    - Nokia N8 with Chinese Firmware (Belle)
    - All contacts are synchronized with GMail via Exchange ActiveSync (Mail for Exchange)
    - All contacts are saved with proper international prefix (e.g. +44..., +36...)
    - It displays the number when someone calls, so not a network issue
    - Name resolving works for text messages (except once, but rebooting fixed it)
    - It works for calls when someone from another country is calling
    - There are duplicate numbers in my phone book, but it doesn't work with the non duplicate ones either
    - There are no numbers on the SIM and phone memory only is selected
    What I tried:
    - Reboot
    - Hard reset (the actual hard reset using the three buttons, not the code)
    - Reflashing
    It would be great if anyone has any ideas what to try next.

    i have got the same problem on my Nokia n8 after upgrading it from authorised Nokia centre
    Moderators notes: Discussion of a legal nature is not allowed on the forums.

  • I have problem with concoction i can not make call or sms

    I have problem with my i phone 5 i can not make call and sms do please help me

    I think you don't understand the purpose of this forum. This is a user-to-user support forum. You're not talking to Apple. You're not talking to your cellular carrier.
    One last time and then I'm done:
    You need to call your cellular carrier and get this sorted out. No one here can help you.

  • My iphone 4 did not make call. It can receive calls, send and receive sms, internet is working. How can I solve this problem?

    My iphone 4 did not make calls but I receive calls, send and receive sms, emails, etc. How may I solve it?

    I am having the same problem with ios 4.3.5

  • Hi I call you from Iran. Today I encountered a problem I hope you can help me. I have iPhone 5 with version 6.1.4. Jailbreak I would rather not unlock. My problem is that the Operator name (top left) searching ... The appearance of! And no matter how I tu

    Hi
    I call you from Iran.
    Today I encountered a problem I hope you can help me.
    I have iPhone 5 with version 6.1.4. Jailbreak I would rather not unlock.
    My problem is that the Operator name (top left) searching ... The appearance of!
    And no matter how I turn off and I remove the SIM card Sarchyng not stop.
    Even when I'm not on the phone's SIM card No SIM card Does not appear.
    I appreciate your help.
    Thank you for your attention.

    ilove.perspolis wrote:
    Hi
    I call you from Iran.
    Today I encountered a problem I hope you can help me.
    I have iPhone 5 with version 6.1.4. Jailbreak I would rather not unlock.
    My problem is that the Operator name (top left) searching ... The appearance of!
    And no matter how I turn off and I remove the SIM card Sarchyng not stop.
    Even when I'm not on the phone's SIM card No SIM card Does not appear.
    I appreciate your help.
    Thank you for your attention.
    I read this to say that the phone is not jailbroken and the OP does not want to jailbreak it.
    The only way to unlock it is to contact the carrier it is locked to, and ask them to unlock it.
    You are also in the unfortunate position that the iPhone is not supported in Iran due to the international embargo.

  • How do I know if Bonjour is enabled on my device and Mac?  My Mac could not identify an APP:  "Document to go" that I bought for my iPad.  One of the problems could be that Bonjour was not enabled?

    How do I know if Bonjour is enabled on my device and Mac?  My Mac could  not identify an APP:  "Document to go" that I bought for my iPad.  One  of the problems could be that Bonjour was not enabled?

    If you're trying to run an iPad app on a Mac, forget it. You can't. Otherwise please clarify what the problem is.

  • We bought a time capsule then the wifi has a problem since it does not identify the existing wireless network and it says that its need to have an update firmware. The existing firmware is 7.3.1, does it have an newest update firmware existing now?

    We bought a time capsule, 1TB, then the wifi has a problem since it does not identify the existing wireless network and it says that its need to have an update firmware. The existing firmware is 7.3.1, does it have an newest update firmware existing now? Does APPLE do not provide latest firmware for this item?

    How old is that Time Capsule?  The fact that it still have firmware 7.3.1 suggests that it's not the latest model.  The latest firmware available for my two-year-old model is version 7.5.2.  Apple does provide firmware updates.  You just have to let the Time Capsule download and install them.  Use AirPort Utility to do that.
    Regarding your Wi-Fi problem, please explain what you mean by "it does not identify the existing wireless network".
    By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject.  In the future just type a short summary of your post into that field and type the whole message into the field below that.

  • UPDATE TO PROBLEM PLEASE HELP: validator on af:inputText not being called

    I have the following inputText component bound to a validator method on my page:
    <af:inputText inlineStyle="width:650px" id="txtDescription"
    binding="#{backing_osQualAdd.txtDescription}"
    validator="#{backing_osQualAdd.validate}"/>
    Below is the validate method:
    public void validate(FacesContext facesContext,
    UIComponent uiComponent, Object object)
    // Add event code here...
    System.out.println("test");
    Upon submit (partial submit) of the page this method does not get called. Why is this?

    I found what the problem is but now I have another problem. The problem was if there is nothing in the inputText then the validation method won't be called. But the problem with this is I can't just set required="true" on the inputText because I'm using a button that does a partialSubmit to fill in the inputText.
    So basically what I'm saying is I need to create my own required validation. Is this even possible?

  • My 4s is dropping calls when switching towers- my 3GS did not have the same problem in the same areas?

    This 4S is a major step backward for my compared to my 3GS-  Less battery life, much poorer ability to switch signal types without losing the call.  What are they thinking adding all these bells and whistles without making a damned battery that can get through a full day and an antenna that can handle a variable network?  This stuff was solved YEARS ago by Blackberry. 
    I've done the location off fix for the battery- no help whatsoever.  Any ideas on the tower change call drop problem?!  Very frustrated that I spent $400 on this POS

    ...and the fact that I'm locked into this thing for 2 years is absurd when it's so flawed.  What a scam.

  • I am not receding calls or messages on my new iPhone 5 unless I make a call first is anyone else having this problem

    I am not receiving calls or messages on my new iPhone unless I make a call first, this is when I have full service.

    Try resetting your network settings, go to settings, general, reset , reset network settings, Then reset your phone also, hold the home and off button down until the apple symbol comes up, then release. See if that solves it first.

  • Nokia 6300 not receiving calls

    Does any one know why my 6300 will not receive calls from any other carrier ,it only takes calls from optus? Help!

    Do any other SIM cards work in it ? Sounds like it could be blacklisted.
    Normally when a handset is blacklisted , you can send and receive SMS , but not make or receive calls.

  • How can I remove ALL of  iTunes as 8.2.023 is not identifying my iPhone

    I have spent days on this and other discussions trying to fix my unintentional update to iTunes 8.2.023. Apple was called and they could not resolve and were sent a few logs from Apple and Widow Diagnostics. They have now ignored recent email and phone calls on the case which is still open. Version 8.1.1 worked fine every time with my iPhone, that upgrade back in April was truly painless. Last week's Install was fine without error and it converted my library to their new format. Error then popped up "An iPhone has been detected, but it could not be identified properly.." Apple tech and Engineers have had this open case for a week now without a resolution. I tired the very first night to return to prior version 8.0.52 manually from Apple and later let Vista use Restore point which successfully restored to a point with correct version of 8.1.1 yet iTunes still Failed to have iPhone "Identified Properly" I uninstalled al iTunes applications and reinstalled iTunes per Apple instruction Friday (19Jun)and it still failed to work. I made no other changes yet iPhone popped up in iTunes identified last Saturday(20 Jun) morning for unknown reason and then failed the next day. I tried all things found in discussions, I have no Wireless Network in fact no network exists other than a single desktop connected to the internet. I unplugged/disabled internet connection, unplugged all but 1 USB device, moved iPhone to different USB Port, performed Hard Reboot of iPhone, used msconfig to disable all start up services and programs except those needed by Microsoft & Apple, Verified drivers for iPhone and Apple Mobile Device Services are updated, etc. etc. Unrelated and with nothing to lose I updated Vista to Service Pack 2 which made some device changes but no other effect on iTunes. I uninstalled 8.2 and got a fresh download without Firewall/AntiVirus running. I do know I am not the only one with this problem and the only solution that seems to have worked that makes sense or I have not been able to do is revert back to older 8.1.1 version. I know I may risk losing library but that can be rebuilt. At issue is no backup or restore should iPhone fail (it did just that two months ago) and no access to selections available in iTunes library which is only reason for my having iTunes. Buying 3G S or updating iPhone elsewhere to Firmware 3.0, though suggested by Apple, has not worked for those who tried. Apple is not supporting.

    I got rid of AMDS, ASU ,QuickTime and iTunes from control ones I also found folder in Vista with D:\Users\Rick\Music\iTunes\Previous iTunes Library and there is one dated 2009-03012.itl. I moved this file up one folder and delted existing iTunes Library.itl. iTune still failed to identify my iPhone. There are other files iTunes Library Extras.itdb, iTunes Library Geniyes,itdn and iTunes Music Library,xml date dtd 06/18/2009 after upgrade except the latter which is date 06/23/2009. So something is not allowing me to pull or put everything back to when it worked.
    YES this is my only iPhone and only PC I have access to with iTunes.
    Here is what Apple gave to someone Sunday 28 June:
    http://discussions.apple.com/thread.jspa?threadID=2035950&start=75&tstart=0
    I checked these out too and they appear the same printed out nearly a week prior. I agree with Coach TO, if I had bad drivers or Vista errors it would not have shown up only when I updated to latest Version of 8.2.023. My Phone was identified on a PC with iTunes at the local AT&T store. He suggested I get phone into Recovery made while connected to iTunes and that resolves the problem 9 out of 10 time. Weak spot was he tried to get phone into Recovery without iTunes connection and thought I may have iPhone problem, then changed his mind when it worked while connected. He also stated it could take an hour. I have not tried to put my iPhone in Recovery lately, I think I did a while back and it failed to go into Recovery as error "iPhone detected by, not identified..."Has anyone tried forcing phone into Recovery? I understand you may lose all that is on phone. If iTunes still fails to identify would we not be in worse shape even if iTunes holds a recent backup which it does not for many of us? Will Apple take back or exchange phone if yours is not identitifed, AT&T today told me I had to go to Apple Store for this or anything to happen.

  • Help - Nokia N8 will not notify me when I have a m...

    Help please...
    My Nokia N8 does not notify me when I have a message or a missed call. The only way I know is that the indicator light will flash but it says nothing on my home screeen so I have to go into log or inbox to check what it is notifying me of. Anyone had this problem before?
    Thanks

    Are you using the notification widget on any homescreens
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

Maybe you are looking for

  • Different material description for RG1 register

    Dear Experts, I have a client requirement for change in material description (materialmaster) to a different description. The description maintained in material master is for viz SS CT BT 200mm-123-093MKO But excise need description SS BILLET Where t

  • CQ 5 Tag Search with German special characters

    Hi all, I configured CQ 5.5. to do search on a set of custom tags that I created for documents. I did that by adding some new tags in /etc/tags/custom and adding this path in /apps/dam/content/search/searchpanel/facets/tagoptions. I noted that search

  • MST PVSTP interoperation

    Hello, I've read the "understanding MSTP article" from cisco's website and I have several uncertainties. These have deepened even more after performing several experiments. I've setup a test scenario with the following configuration: C1 Cisco PVST --

  • Missing vi.lib files in Run-Time LabVIEW 2012

    Hi I've got a problem executing VI's under RT in LabVIEW 2012. Our system consist of multiple independent modules which are opened and run from a Manager VI. VI paths to the modules are read from an .ini file by the Manager VI. We have build a single

  • Help! I deleted my Font Book on my MacBook!

    I deleted my Font Book (apple application) on my MacBook (the first one, it's white) and cannot retrive it. I moved it into the trash and emptied the trash can. Please help. Thank you,    Hannah.