Nokia C2-00 USB Modem Problem

Dear Sir,
 I am using Nokia C2-00 (Dual Sim). I connected this device with my pc through usb data cable.
 Now in device manager it is shown as Nokia C2-00 USB Modem # 2 on port 15.
 I am using Microsoft Communications Control Version 6.0 to send messages.
 All other nokia mobile sets send sms through abvoe control perfectly but when I attach Nokia c2-00 then no message is sent to mobile.
 I want to ask should I change some settings in nokia c2-00 or there is another software to install in my pc.
 I am using following softwares
Nokia Suite 3.2.100
Nokia PC Suite 7.1.180.94
PC Connectivity Solution 12.0.27.0
Connectivity Cable Driver 7.1.78.0
Maps Service API 4.0.29.0
Nokia nPlatform 3.2.100.0
Detected USB drivers:
- Default Hub Driver for USB 6.1.7600.16385
- USB Modem Driver 6.1.7601.17514
- EHCI eUSB Miniport Driver 6.1.7601.17514
Please help

tqmd1 wrote:
Dear Sir,
 I am using Nokia C2-00 (Dual Sim). I connected this device with my pc through usb data cable.
 Now in device manager it is shown as Nokia C2-00 USB Modem # 2 on port 15.
 I am using Microsoft Communications Control Version 6.0 to send messages.
 All other nokia mobile sets send sms through abvoe control perfectly but when I attach Nokia c2-00 then no message is sent to mobile.
 I want to ask should I change some settings in nokia c2-00 or there is another software to install in my pc.
 I am using following softwares
Nokia Suite 3.2.100
Nokia PC Suite 7.1.180.94
PC Connectivity Solution 12.0.27.0
Connectivity Cable Driver 7.1.78.0
Maps Service API 4.0.29.0
Nokia nPlatform 3.2.100.0
Detected USB drivers:
- Default Hub Driver for USB 6.1.7600.16385
- USB Modem Driver 6.1.7601.17514
- EHCI eUSB Miniport Driver 6.1.7601.17514
Please help
With regard to modem issue, can you tell us more what's the exact concern? Do you encounter any error message? Are you using Nokia Suite or Nokia PC Suite to do this? 
When you send messages or connect to the internet, Nokia Suite uses the SIM card that is in the internal SIM card holder of the phone. This card goes by the name of SIM1, unless you have renamed it. To send a message or create an internet connection with the other SIM card, swap the SIM cards in your phone.
Hope this helps. 

Similar Messages

  • Nokia 6120 Classic USB Modem is not working proper...

    Hello everybody!
    Something strange happened last week with my Nokia 6120 Classic (version: 03.83). I regularly use it as a USB modem and last week's Wednesday it stopped working. What the problem really is due to, is hard for me to say precisely.
    Using Windows Vista (Business, x64, SP1) "Connect to" function, I have previously connected to using HSDPA, but after last week the following happens:
    Starts with "Dialing" then goes to showing status "Verifying user name and password" for less than a second after which Vista informs that "Failed to connect to..." and the phone shows the 3G symbol with dashed arrows below.
    I've tried the following:
    - reinstalling PC Suite (the latest, greatest version)
    - reinstalling the modem drivers (between Nokia USB modem and 6120 USB modem) using the whole reboot thing
    - using another USB port, which doesn't work since Device Manager reports that the driver can't start properly
    - restarting, cold resetting the phone
    - switching to GSM only
    - testing with another computer running SP1
    - removing modem init commands for the Internet connection
    Now, the strange thing with the second computer was that everything worked just fine with it. My computer on the other hand didn't work at all!
    I've put the modem communication logs from the working computer here:
    http://docs.google.com/Doc?id=ah8pw9pjrf55_12g38wqpdt
    And the modem communication logs from my non-working computer here:
    http://docs.google.com/Doc?id=ah8pw9pjrf55_11hjcq39g4
    What was interesting on my computer is the "NO CARRIER" line which makes no sense to me: why on earth is it starting to check for a carrier signal all of the sudden??
    Any tips with this here dilemma would be greatly appreciated.
    Message Edited by manywhere on 18-Feb-2008 09:47 AM

    I tried using a Nokia E90 and connecting to the net using both PC Suite's "Connect to the Internet" and using Windows´ "Connect to" programs. With the E90, I had the same problems: fails at "Verifying user name and password" and the strange looking modem communications log.
    What the heck is going on with my Windows installation here? I tried removing the drivers again, repairing PC suite and restarting the computer, but to no avail.

  • USB Modem problems on old iMac

    *I was reffered here from another subforum, so this is actually cross-posted. Sorry... *
    I'm trying to help my dad install a new modem on his tray-loading tangerine iMac. This was my first computer, and she's still doing well except for the modem being taken out by lightning, for the second time. The first external modem he used was the Supra Express USB modem, and it remains in the network list. I've asked him, but there doesn't seem to be a way to delete the previous modem config--all the options are grayed out.
    The error he keeps getting is "communication device does not exist." He's installed the Smart One 56K USB External Data Fax Modem for Mac (56USBPMAC). It's supposed to be compatible. He's configured the modem with his ISP info and selected the modem script from the scripts list from the Network Prefs, but he still get this error (it's the same as the one he got before installing).
    Anyone know what could be the problem?
    His info:
    iMac G3 rev. B CD-ROM tray-loading
    OS 10.3
    RAM 96k

    Hi Jessica
    This is from memory so I may get things wrong.
    In the network pane you should get the option to select the order in which the coms devices are chosen. Usually you just drag the one you want to the top of the list and that's that.
    I'm not sure if it works with modems as I haven't dealt with one in over a year now!

  • Nokia 2865 CDMA USB Modem

    Hi Mobile Guru, I want to surfing internet with Nokia 2865 USB Modem. But i am unable to install Nokia 2865 USB Modem. when i  connect the Nokia 2865 to PC via CA 53 Cable with PC Suite 7.1, there is Not found Nokia 2865 USB Modem. Is there USB MODEM in Nokia 2865 CDMA Phone ? If Yes, what's the procedure to find the USB Modem? i found only Bluetooth Modem in My Nokia 2865 CDMA Phone When i connected the phone to PC via Bluetooth. Help Plz.............

    hi,
    this is the link to your original post : /discussions/board/message?board.id=connectivity&thread.id=21349
    i would suggest u use it to go to ur original thread and click "Reply" rather than creating new threads on the boards
    if my post helped u out, please click the Star next to it to add some KUDOS to my name

  • Nokia 3120 classic blutooth modem problem

    Hi,.
    I have a Nokia 3120 classic, on my PC I have Nokia PC Suite and a bluetooth dongle. Now when I connect my phone & PC via bluetooth everything is great, I can sync with my PC, transfer files, update contacts & messages, even send & receive SMS via PC. But I cannot connect to the internet. When I try to it says it is searching for bluetooth modems but none are found. If I connect my phone to the PC via USB cable, no problem, I get connected in seconds.
    What's up?
    Many thanks,
    Henry.

    I also have the same nokia 3120 classic. But I cant c my contacts in pc thru bluetooth or cable. So can u pls suggest me as how to get it done as u explain in ur report?
    Moderator note: e-mail address removed. We do not encourage the sharing of personal contact information on the public boards for reasons of security.
    Message Edited by michaels on 06-Oct-2009 01:09 PM

  • Nokia N70! USB cable problem.

    Hi everyone! I am having this real problem with connecting my phone to the pc. When i first brought the phone i had no problems in connecting it, but after few months my OS refused to recognize my phone =(! I have reinstalled the software many times, took the latest version of Pc Suite from the internet also but still no use =(! It says that the device has malfunctioned and is not recognized! I have formatted my phone aswell and reinstalled the software but still no use! =(! I am using CA-53 USB cable! Please help me! i need to remind you people again that it used to work in the beginning but suddenly stopped! Please help!!!!

    Do not forgot to do this every time you install reinstall pc suite! Now i have one more problem! I cant reinstal simbian software via Nokia Software Updater coz drivers arent working
    I starting to hate nokia ( really! )
    CAN NOKIA FIX THIS PLEASE???? or they will loose customers!
    Btw, i glad i helped you

  • Nokia 3710 - PC usb connection problem

    I have the latest firmware on my 3710 and the settings on Connectivity are set USB Data Cable to PC Suite.
    When I connect the USB Cable from my PC to the phone, my PC which runs Windows 7 Home Premium does not even recognized that there has been some kind of USB connection. Is my phone faulty?

    Nokia doesn't supply USB cables with all its phones. So it may b the case. From where did u get that cable? And is it new or used? If its a Nokia Original & its not working then u can check the compatibility on the Nokia Website of ur region.
    Please mark the post as solution if it solves your problem.
    Current Device - Nokia Lumia 1020/920

  • NOKIA 5500 SPORT - USB Connectivity problems

    When connecting my 5500, the message "new hardware found", "portable device driver" and "NOKIA 5500 Sport" pops up all the time, I rpt: All the time..
    I am able to make a back-up, but I am not able to read dato in the nokia browser (liike contacts)..
    Can you help me ??
    xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
    Operativsystem:
    Microsoft Windows XP
    Bygg 2600
    Service Pack 2
    Språk: Norsk (bokmål)
    Språk for ikke-Unicode-programmer: Norsk (bokmål)
    Lokal: Norsk (bokmål)
    Inndataspråk: Norsk (bokmål)
    Nokia PC Suite:
    Versjon 6.83.14.1
    Språk: Norsk
    Connectivity Cable Drivers:
    Versjon 6.83.9.0
    PC Connectivity Solution:
    Versjon 7.7.10.0
    Microsoft Outlook:
    Versjon 11.0
    Bygg 8118

    Excuse my ignorance to NOKIA forums.. But what is "WPD loop posts" ??

  • Usb modem problem on Arch Linux

    hello everyone please feel free to look at the link I've provided.
    http://www.mudah.com.my/vi/1336427.htm?ca=11_s
    Also this one
    http://racoma.com.ph/archives/smart-bro … kit-review
    I know you would probably guess what my aim would be?;)
    Running this device on my arch desktop. ^^
    If ever I want to use this, I first need to have an xp machine to serve as a host and let it share a connection on my linux machine.
    If you could provide me with steps how to run this on Arch it would be helpful for me. 
    Thanks in advance...
    Last edited by kaola_linux (2008-11-16 02:27:50)

    Anyone with the same scenario? Please help a newbie like me...:) Thanks
    I had found this guide, is this similar or there will some changes?
    http://streetsmartingit.blogspot.com/2008/07/how-to-use-smartbro-prepaid-kit-on.html
    Last edited by kaola_linux (2008-11-16 02:29:18)

  • NOKIA 2865 USB MODEM

    Have Nokia 2865 USB Modem ? I am unable to install Nokia 2865 USB Modem with PC Suite 7.1 ,DKU 2 or CA 53 Cable. When i connected with Bluetooth, Nokia 2865 Bluetooth Modem appear. Any One Help Plz........

    greetings,
    arie i've got the same problem as you. i've installed nokia pcsuite 7.1 it did detect my handset but refused to install the modem. here's the tricks i've used .....
    just uninstall the pcsuite you use then install this version 6.85 dalam Bahasa Indonesia
    you may found in here : "http://www.nokia.co.id/dukungan/dukungan-produk/nokia-2865-cdma/software"(without qoute)
    but before you install the pcsuite install the cable driver that came along in the site then connect your phone after you installed the pcsuite
    i hope this would help you.....................
    cheers ,
    cahbagoods

  • Please help: Problem sending fax to one recipient using Apple USB Modem

    Hello,
    I'm using an Apple USB Modem to send an receive faxes on my PowerMac G5. This is working great to the most recipients, but not one with a Philips fax machine.
    The problem is, that everybody can send faxes to him - except of me
    I'm using a software called Pagesender for this, I e-mailed the support and he told me, that the my fax is timing out and some of his customers have made positive reports of Zoom and Best Data Modems in cases where the Apple Modems have encountered line noise.
    Also the Tiger fax solution doesn't work ... The odd things are, that I could send faxes using a stationary fax machine and don't have problems to send faxes to others ...
    Is there really no solution for this.
    Best regards
    René

    Hello,
    I'm using an Apple USB Modem to send an receive faxes on my PowerMac G5. This is working great to the most recipients, but not one with a Philips fax machine.
    The problem is, that everybody can send faxes to him - except of me
    I'm using a software called Pagesender for this, I e-mailed the support and he told me, that the my fax is timing out and some of his customers have made positive reports of Zoom and Best Data Modems in cases where the Apple Modems have encountered line noise.
    Also the Tiger fax solution doesn't work ... The odd things are, that I could send faxes using a stationary fax machine and don't have problems to send faxes to others ...
    Is there really no solution for this.
    Best regards
    René

  • Problems with Vodafone/Huawei E220 wireless usb Modem

    Hi there,
    My faithful Powerbook is having issues with a company issued Vodafone Vodem (Huawei E220 wireless HSDPA 3G USB modem).
    It worked well at first, but then after restarting, waking from sleep or rebooting from off, the Vodem would cease to connect to Vodafone, with the Vodafone Modem Software giving me a cryptic message "No modem or data card attached".
    Yesterday, I tried reinstalling and uninstalling the software, and after several installation/uninstallations, it finally reconnected. It has since stopped working again since shutting down the Powerbook overnight. Reinstalling has not yet worked.
    I read somewhere on the net that leaving the modem plugged in for a minute before attempting to connect might work - alas no such luck.
    Has anyone else out there had problems with their Vodafone/Huawei E220 USB wireless modem, and how did you resolve the problem?
    I have tried both the New Zealand 2.07 version, plus the European 2.08 version of the Vodafone connectivity software.
    I am running a Powerbook 15", 1.67ghz, MacOS 10.4.11, 512MB, no other peripherals connected.

    No experience, but what happens if you log out then back in?
    Does a New User have that problem?

  • Power management problem with USB modem

    I now use a MS-6743 (i865G) board. My previous board was MS-6533, it did not have USB v2.0.
    The problem is my Aztech (originally Smartlink) USB modem prevents the system going into standby mode but this should be a USB 2.0 issue because I'm using the same driver for the modem like previous mainboard config. I could go into standby mode flawlessly with my old board.
    Furthermore I'm using USB keyboard, mouse but no power management property dialog box appear for those devices. So I'm pretty sure the problem is because of USB 2.0. Is there a way to come around this issue? Thanks in advance...

    To pin point whether or not IRQs conflicts is to be blamed, please kindly post your IRQs conflicts for us to verify.
    A signature of your system setup will proves greater help for others to advice you with more accurate directions and benefits you in the future.
    Please read this  Moan Guide too.

  • Problem with USB modem

    I have just bought a macbook with mac os X tiger. I have a problem with network configuration when I'd like to setup my broadband. I'm now using Tiscali broadband which supplied me a USB modem (Sagem Fast 800). I've already installed the software and driver. The problem appeared when I tried to configured the network setting. I couldn't find "external modem" or "ethernet adaptor" as the manual suggests. As a result, I couldn't make any interent connection. It'd be so grateful if anyone who's using tiscali broadband can kindly give me the solution for this.

    Hi,
    Thanks a lot for your reply. I've looked in the network port configurations and found "Airport", "Bluetooth", "Biult-in Ethernet" and "Built-in Firewire". All of these are checked but I can't see the "external modem" port. I also rebooted the conputer after installing the software and driver. There is a software "ADSL Monitor" shown up in my desktop but can't see the device in the network configurations.

  • Problem with USB modem in OS Yosemite

    Hi, I  am using HUAWEI E173Bu-1 mobile broadband USB modem, after installing OS Yosemite in my mac book pro it was not working properly. Even it doesn't show the signal of the network provider. Anyone faced similar problems and solved the same pls help..

    Have you checked the manufacturer's web site for an update?

Maybe you are looking for