Nokia c2-02 showing local mode after software upda...

I TRIED TO UPDATE NOKIA C2-02 WITH PC SUITE AND INTERNET CONNECTION
IT WAS ALL GOING SMOOTHLY AFTER SOMETIME IT SHOWED RESTART YOUR PC FOR FURTHER INSTALLATION I DID IT AND NOW AFTER RESTARTING MY PC WHEN I ON THE PC SUITE APLLICATION IT SHOWD NO PHONE CONECTED AND MY NOKIA MOBILE IS SHOWING "LOCAL MODE".
PLEASE SOMEONE HELP ME HOW TO RESOLVE THIS PROBLEM
I AM WORRIED

Nokia c2-02 showing local mode after software update

Similar Messages

Ipod stuck in recovery mode after software update

My ipod is suck in recovery mode after software upgrade ios 6. No matter what I did it's still stuck and itunes doesn't recognized it.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

C60 BOOT UP IN MAIN MODE AFTER SOFTWARE UPGRADE

Any one aware of why the C60 would go into maintenance mode after software upgrade from TC5.0.1 to TC7.2.1???
Software loaded and appears to install properly ???
Thanks.

Hi Chet,
You can try a factory reset in addition to the suggestions in the following post for similar issue
https://supportforums.cisco.com/discussion/12394476/c60-possibly-faulty
HTH
Manish

N78 - N-GAGE 1.40.1557 trouble after software upda...

Everything worked fine with my N78, except minor RealPlayer issues, but after software update 12.046 to 13.056 N-Gage application won't launch games, won't uninstall old n-gage ones, won't install new n-gage trials. The phone's application manager still uninstalls other games (not n-gage) but with everything n-gage related it says "removing failed". The purchased games via GPRS/CSD/WAP Vodafone portal run normally like before. Whenever I launch N-Gage and try to run a game it tells me I need to update it or asks me to uninstall a n-gage game but fails the uninstall with "error -2". I downloaded a n-gage trial game via GPRS/CSD/WAP Vodafone but it failed to install with message "file corrupted" - that never happened before. These "error -2", "error -1" and "error -5" keep popping up with everything n-gage related. Everything else works fine as ever. I did two backups of my personal data after emptying the memory card (music and videos) and checked all backup boxes on Ovi Suite 1.0 and 1.1 on my desktop and laptop machines (one computer has internet, the other doesn't). Then after the software update errors I restored one backup with Ovi Suite 1.1. As it failed to correct n-gage problem I re-updated the software to 13.056 with no luck of change. What should I do to bring back n-gage? Thank you.
Solved!
Go to Solution.

I had enough of Symbian S60 3.2 application manager's faulty behaviour (did not install neither uninstall packages) and decided to try the famous last resort code *#7370#, suggested by user samposuv at Antony Pranata's Forum Nokia Blog (http://blogs.forum.nokia.com/index.php?op=ViewArticle&blogId=34687&articleId=93). It worked nicely as it cleansed the phone to the core. As I had previously backed everything up, it was easy to restore all the purchased items at Vodafone portal. Installed n-gage 1.40.1557 once more, as it had been the root of all trouble, as well as the latest version of NetQin free antivirus. The minor RealPlayer issues still persist but they are manageable (I have to wait about 15 seconds before the 2nd read of a video file in order to watch the pictures or else only audio is heard - happens sometimes, not all the times). In the end only have to account the loss of a n-gage file, acquired by a give-away code by Nokia Publishing, so "no biggy". The Speed Dial was just "off" (oops!). Sorry for mistaking 13.052 for 13.056 - mAbAd! PeeaCe!

Iphone 4S stuck in DFU mode after software update

I tried to update my iPhone 4S but for some reason it failed and went into DFU mode. When I tried to restore the device from iTunes an error code (9) pops up. After several failed attempts I gave up and decided to visit an Apple store. To my disappointment, the restoration failed and because the device was out of warranty (bought in Oct 2011) I was offered a like for like handset for £149. But I declined, I couldn't grasp the fact that my phone stopped working due to a software update and I had to pay for another one. I was also told by the Apple rep that due to the age of some devices, they were not able to handle software updates! That really upset me because if I had known that, I would not have even bothered with updating my phone. Besides, I've had this phone for just under 3 years I didn't think it was that old to not be able to survive a software update.
Apologies for the rant.. but is there anyone who has/had same experience and is there no way to restore the device?

Try the steps:
How to perform a recovery-mode restore
If your iPhone, iPad, or iPod touch is already showing the "Connect to iTunes" screen, please go to step 5.
Connect your USB cable to your computer but not to the iPhone, iPad, or iPod touch until step 3.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button down, connect the USB cable to the iPhone, iPad, or iPod touch. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen. When this screen appears, you can release the Home button:
Note: If the image of a battery appears, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again. If you don't see the Connect to iTunes screen, try these steps 1 through 4 again.
iTunes should automatically open and display the following message:
"iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
Note: If iTunes not open after two minutes, please open iTunes yourself.
Use iTunes to restore the device.
More info here: http://support.apple.com/kb/HT1808

Iphone in recovery mode after software update

Hello, I have just downloaded and upgraded my software on iphone 4.
It seemed to have taken about 2-3 hours.
There was an error (which I missed) and now I have on my phone the white apple sign, on my itunes it says - "Itunes has detected an iphone in recovery mode. You must restore this iphone before it can be used with itunes.
My only option on itunes is to restore to original settings, which Im guessing I will lose all my data etc?
Does anyone know of an alternative solution?
I have held down the home and power button but no luck.
Please help!

Try the steps:
How to perform a recovery-mode restore
If your iPhone, iPad, or iPod touch is already showing the "Connect to iTunes" screen, please go to step 5.
Connect your USB cable to your computer but not to the iPhone, iPad, or iPod touch until step 3.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button down, connect the USB cable to the iPhone, iPad, or iPod touch. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen. When this screen appears, you can release the Home button:
Note: If the image of a battery appears, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again. If you don't see the Connect to iTunes screen, try these steps 1 through 4 again.
iTunes should automatically open and display the following message:
"iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
Note: If iTunes not open after two minutes, please open iTunes yourself.
Use iTunes to restore the device.
More info here: http://support.apple.com/kb/HT1808

Java Web Console starts in "user local mode" after Sol 10 Patches

After applying Solaris 10 recommended patch cluster, the web console on my SPARC platform starts the web console such that only the local host clients can connect via web (https://localhost:6789/). Webconsole log file states "the console instance "console" is starting in local user mode. Prior to applying the patch cluster, the log file stated "the console instance "console" is starting in user mode." How do I get it to start in regular user mode?
Patch cluster is dated: 24-Apr-2009. I am running Version 3.1 of the webconsole. Using the webconsole primarily for adminsistration of Sun Java Directory Server 6.3.1 using the DSCC.

Thank you for the response. Prior to implementing your recommended fix, I discovered the following Example in the man pages for smcwebserver:
Example 3 Using SMF Property to Allow Remote Access
The following sequence of commands allows remote access to the Sun Web Console server.
# svccfg -s svc:/system/webconsole \
setprop options/tcp_listen = true
# svcadm refresh svc:/system/webconsole
Executing the above commands restored full webconsole access.

Artists not showing in iPod after software update.

Need help...After updating the software in a 5G Video iPod, songs successfully transferred, but the artists for those songs do not show up? Example, I transferred U2's Vertigo over where Vertigo listed and played in Songs, but U2 did not show up under Artist in the iPod? Has anyone else experienced this problem and found a solution?
Dell Dimension 8300 Windows XP
Dell Dimension 8300 Windows XP

Try looking/posting here.
Microsoft Support – Office for Mac
Microsoft Support – Office for Mac (2)

Iphone 4s now in recovery mode after software update 7 ??

hi. i have seen a few comments regarding this, but this is my BUSINESS PHONE and I cannot get it out of recovery!
it went into recovery after I uploaded (ironically) the bug fix realeased yesterday.
Now, nothing! Just the itunes connection picture on the phone and message regarding 'phone is in recovery mode'
HELP!
Thanks

Try the steps:
How to perform a recovery-mode restore
If your iPhone, iPad, or iPod touch is already showing the "Connect to iTunes" screen, please go to step 5.
Connect your USB cable to your computer but not to the iPhone, iPad, or iPod touch until step 3.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button down, connect the USB cable to the iPhone, iPad, or iPod touch. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen. When this screen appears, you can release the Home button:
Note: If the image of a battery appears, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again. If you don't see the Connect to iTunes screen, try these steps 1 through 4 again.
iTunes should automatically open and display the following message:
"iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
Note: If iTunes not open after two minutes, please open iTunes yourself.
Use iTunes to restore the device.
More info here: http://support.apple.com/kb/HT1808

HT4623 phone hanging mode after software updation, ios 6.1.2

hi, today i try to update (6.1.2) my i phone 4S through itunes from my Laptop, after updation completed i got one error msg. then my phone not working, i cant switch off mobile, it is hanging mode, why it is like that? Tojo Dubai

What error message did you see?
This Apple doc is a good place to start with update/restore problems -> iOS: Resolving update and restore alert messages

Recent emails not showing in outlook after software update

i updated my software yesterday to maverick and it has runied my search in outlook. office 2011. when im trying to search a recent email, its showing emails only until dec jan 7th 2014. the emaisl are there but im not able to use the search functions, im having to manually run through thousands of emaisl of find something i recieved 2 months ago or 3 months ago.
please advise how do i solve this. im sure, its somethign small but its annoying .
help!

Try looking/posting here.
Microsoft Support – Office for Mac
Microsoft Support – Office for Mac (2)

Numbers doesn't show old spreadsheets after software update

I Need to use my iPad to access the spreadsheets I created in numbers and before I update to OS8 I was able to see them from my iPad. What's the deal? I've got the "use icloud" turned on. What am I missing?

Your Mac is storing the spreadsheets in icloud. But when you updated your iPad to iOS 8 you most likely turned on iCloud Drive. The two do not communicate with each other and the Mac running Mavericks does not support iCloud Drive. Once you update your Mac to Yosemite iCloud Drive will work on both.
In the meantime you might be able to email the spreadsheets from your Mac to your iPad.

BlackBerry Z10 - voice mails not showing on Hub after software update

I have a BlackBerry Z10 smartphone with Verizon and yesterday I upgraded to the 1.0.4.1 version. Now my voice mails are gone from the Hub and I don't even get notifications whenever somebody leaves me a voice mail. I called Verizon and they were not able to help. Is anybody having this same issue? Can somebody help? Thanks in advance.
Solved!
Go to Solution.

I had the same problem as you - including the missing voicemail option to add to the hub. No amount of battery pulls or re-starts helped. Here is what worked for me: Go to Setup and activate Visual Voicemail. Agree to the $2.99 monthly fee. Wait 5 minutes as directed and then call yourself and leave a voicemail or two. You will notice the Visual Voicemail icon (and message indicator) now appears in the Hub. Go back to Setup and deactivate Visual Voicemail. Your regular voicemail, and test messages, should now remain. Not sure if you/I will get charged the $2.99 for 10 minutes worth of Visual Voicemail but it will be worth it to get the regular voicemail back. Hope this helps. Post back with your results.

Files not showing captured images after belle upda...

after belle update i cant see the images i have captured with n8's camera in files(file manager of phone) even though i can see them in gallery.......only the captured images after update are not showing..does anybody else have the same problem..how could i resolve it?????
Solved!
Go to Solution.

I have the similar problem after updating to Belle on my N8. My photos, previously taken with the phone are still somewhere on the memory card and are visible if I want to add them to the contact profile, but otherwise, can not locate them? Tried thru attach to e-mail, MMS, connected to PC and browsing .... It must be some hidden folder. Does anybody can help me? Thanks!

Lumia 520: Can't connect to 3G after software upda...

unable to select 3g network in my lumia 520 after updating phone (docomo network)
Moderator's note: We have amended the title of this post as this was moved from another thread.

Hi facing,
Welcome to the forum.
What connection did you use when you updated your phone? Is it cellular data connection or Wi-Fi? Have you tried contacting your operator about this? Try to remove and reinsert your SIM and then reboot your phone. You can also try to update your phone's settings by scanning the QR codes on this link: t5/Pool-of-Knowledge/Nokia-Windows-Phone-8-App-Updates/td-p/1640082. For the steps on how to scan QR codes, see this: http://www.windowsphone.com/en-US/how-to/wp8/web/scan-codes-tags-and-text.
Let us know the outcome.

Nokia c2-02 showing local mode after software upda...

Similar Messages

Maybe you are looking for