NOKIA C3-00, CANT HEAR WHEN I CALL OR RECEIVE A CA...

I HAVE A NOKIA C3-00,I  CANT HEAR WHEN I CALL OR RECEIVE A CALL UNLESS ON LOUDSPEAKER OR HEARPHONES. I TRIED TO RESTORE THE FACTORY SETTINGS BUT COULD NOT BECAUSE I DONT KNOW THE CODE. CAN SOMEONE HELP ME WITH A CODE ASWELL

Hi,
If factory setting does not help (code 12345) , please visit Nokia Care Point in your area.
To find your nearest Nokia Care Point, visit http://www.nokia.com/support and select the Repair page.
Br
Mahayv

Similar Messages

  • Cant hear person im calling or receiving call from

    I Cant hear the person im calling or who calls me, i hav to put my fone on speaker,but my fone rings,if i try to adjust the volume it shows "headphones"

    Hello Beaunita,
    I'm sorry to hear you are having issues with your iPhone. If you are not hearing anything from the receiver on your phone, you may find the troubleshooting steps outlined in the following article helpful:
    If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone - Apple Support
    Regards,
    - Brenden

  • I cant hear Voice during call after i upgrade 7.1 i use iPhone 4

    I cant hear Voice during call after i upgrade 7.1 i use iPhone 4

    Hey there Goesdhar,
    It sounds like you are not getting sounds from your receiver on your phone. I recommend the troubleshooting from the followint article named:
    iPhone: Receiver and call audio quality issues
    http://support.apple.com/kb/ts5196
    Increase the volume during the call.
    Make sure nothing is blocking the receiver. If you're using a protective case or display film, remove it and try again.
    Make sure nothing is plugged into the headphone jack or the dock connector.
    Check the receiver opening to see if it is clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush.
    Try another location with better signal. If the audio issue happens only when on a call, it could be due to the location.
    If the iPhone is paired with a Bluetooth headset or a car kit, try turning off Bluetooth on your device. Learn more about troubleshooting Bluetooth connections.
    Restart the iPhone.
    Make sure your device is up to date.
    If the issue is not resolved after restoring the iPhone software, contact Apple Support.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • HT4061 What is the correct name of the tones that my callers hear when they call me, and how do I obtain tones?

    What is the correct name of the tones my callers hear when they call me and how do I obtain those tones?

    Hi sonyadenice,
    Those are called Ringback Tones by AT&T. Other carriers may use a different name for them. If your carrier is AT&T, here is a link with FAQs about their Ringback Tones. If you carrier is not AT&T, then contact them to find out what is available.
    Here is the AT&T link:
    http://www.att.com/esupport/article.jsp?sid=52352&cv=820#fbid=q17lZzzSKGX
    Hope this helps!
    Cheers,
    GB

  • I don't hear when i call and when i receive calls

    I don't hear when i call and when i receive calls. I already formatted my iphone but nothin changed... I hear and i'm heard with headphones and loudspeaker, that's all. Who can suggest me a way to get resolved this issue?

    Sounds like there's a hardware issue with your mic and receiver(speaker used to hear people when in a call).  If you've already restored the phone as new and you're still having the same problem, you need to look at repair/replacement options.  If you are still under warranty(within 1 year of original purchase date) and there is no accidental damage to the phone, Apple will replace it at no cost.  If you are outside your warranty then Apple will do an Out Of Warranty replacement, which will cost you $199 for another 4S.

  • The I4S is frequently hanging when a call is received after updating the Sw to version 8

    After updating the Phone Software to version 8 the Instrument I4S hangs frequently when a call is received. You can see who is calling but the touch screen does not respond and only way is to switch off and on.

    Make sure that you don't have the Do Not Disturb mode enabled in your device.
    Use Control Center and verify that the Moon icon is greyed (not white).
    Check as well in Settings > Do Not Disturb > Manual and Scheduled is turned off

  • My IPhone's volume is not working. I have checked and tried everything. When I use my headset I can hear when phone rings or receive text msg when I pull the jack out I have no sound on anything

    My IPhone's volume is not working. I have checked and tried everything. When I use my headset I can hear when phone rings or receive text msg when I pull the jack out I have no sound on anything

    I had this problem with my 4s a couple of times when I'd taken the headphones out and it hasn't registered it. My solution was easy, all I had to do was turn the phone off and then on again.
    Although I'm sure you've already tried this its a sometimes forgotten and very easy solution to a lot of problems. I hope you find out what's wrong.

  • Cant hear when calling, and they cant hear me.

    Hello,  I got an iphone 4. When I'm calling or get called I cant hear them and they cant hear me. And sometimes when i try to call the speaker automatically comes on. But it wont work with speaker neither. Have tried to updated it, restarted and  restore it in iTunes.

    Hey Andreasvage,
    Thanks for the question. Based on the information you have provided, your iPhone may need to be serviced. The following link should help you get started with the process. Included, you will find information on topics such as warranty, service pricing, and express replacement service.
    iPhone Repair and Service - Apple Support
    http://www.apple.com/support/iphone/repair/
    Additional Information:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Thanks,
    Matt M.

  • My N96 problem cant hear people who call me over t...

    when people call me they can hear me but i cant hear them? but if i change my phone to loud speaker i can hear them and they can hear me still what would be the problem?
    some ppl have said sometimes 2 contacts on the speaker come off could it be this?

    Judge_dead wrote;
    that doesnt help me ither i dont want to take it to a shop i want to fix it my self
    I don't think that you could fix it by yourself. It's better to take your phone to a Nokia care point.
    If this post was helpful/useful, please click the Kudos button to say 'thanks'
    If you want to thank someone, just click on the blue star at the bottom of their post

  • Cant hear on first call but works on second call!

    My wife and I both got Xperia Z1's at the start of November. 
    Recently my wife has been having a problem with her phone.
    Nearly every time she calls me I cant hear her but she can hear me. If she hangs up and phones me back it works fine!
    Anyone got any ideas why? 

    Its been happening for a few weeks now, only seems to be when she calls me although she doesnt really use the phone to call anybody else. We tried calling other numbers yesterday and it seemed ok and also worked ok when she called me! Maybe it has sorted itself out now 

  • Cant hear voice while calling...

    Most of time it happen when I call I cant hear voice of other person and many time other person cannot hear my voice. 
    Kindly check for this issue
    Regards,

    I have the same problem. I have the volume at the max 10, and can hardly hear the other person speaking and this happens on ALL calls. 
    If it's not one problem then it's another with this phone 

  • People cant hear my phone calls

    Hi guys i recently purchased an iphone of some1 and when i make calls i can hear them ok but they cant hear me at all even when i put it on speaker phone

    Have you tried Rebooting it?
    (push home button and power off button at same time, keep holding until apple logo comes up, then let go of power off button, but keep holding home button down until lock screen comes up) hope this helps

  • I can't hear when i call someone

    when someone calls on my iphone, sometimes they can't hear me.  i can hear them, but they can't hear me.  BTW, it's an iphone 4.

    Turn the volume up... in call volume and sounds (ring, notifications, etc) are seperate volume controls.

  • What does the caller hear when they call a "Blocked Number"?

    Just curious to find out what the caller hears when they try to call me when I have blocked their number. TWC was calling non-stop to try to get me to add new services. Thanks.

    Callers you have blocked will hear "Welcome to Verizon Wireless. The number you were trying to reach has calling restrictions which has prevented the completion of your call."
    People attempting to text to your number will get a notification that delivery failed.

  • The sound from my facetime is very low.  I have gone to system preferences and adjusted the sound, it makes no difference and I cant hear when it rings

    the ringing sound from my facetime is very low and i cant hear it at all unless i am already using the notebook and facetime opens.  I have tried to adjust the sound of my notebook, on the whole the sound is not high

    Try resetting the SMC:
    http://support.apple.com/kb/ht3964

Maybe you are looking for

  • How to format hard drive on my T530

    My current T530 is permanantly going back to Lenovo for a new replacement T530 they are sending me. I want to erase all my data on here.  What would be the easiest method? Cheers.

  • Oracle 11g Release 2 - installation how to

    Hi, i have summarized my current findings with Oracle 11g Release 2 in my new blog:      http://ronnyegner.wordpress.com Ronny Egner Edited by: Ronny Egner on Sep 7, 2009 3:00 PM Edited by: Ronny Egner on Sep 11, 2009 2:35 PM

  • Video podcasts and iPod Nano

    Hi everybody! Why can't I add video podcasts to my iPod nano 4GB ?

  • ERROR: The program is unable to generate the add-on queue due to missing add-ons or Support Packages.

    Hi, Can anyone advice on below issue? ERROR: The program is unable to generate the add-on queue due to missing add-ons or Support Packages.     Add the missing Support Packages or repeat the current step and change the add-on selection. Missing Suppo

  • Yosemite and auto start

    Does anyone know how to to set up an application to auto start on boot up? Doesn't seem to work in Yosemite-.you set it up-.but when it reboots nothing changes Thanks for any help Marilyn