Nokia C3-00 display brightness

How can I change the display brightness of my nokia C3-00?
Thanks!
Solved!
Go to Solution.

this cant be done im afraid there is no setting for it
If  i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

  • How to adjust display brightness in nokia 5130 XM

    Hi,
    i want to reduce the display brightness at night times.
    how to adjust display brightness in nokia 5130 XM
    Im not able to find any options for it

    no other way? :-(
    Even 1650 and 2626 models have the option to adjust the brightness.

  • OPTION to adjust display brightness on nokia asha ...

    Hi NOKIA Representative,
    Please provide the support and option to adjust display brightness on NOKIA ASHA 200 in the next software update. (I have NOKIA 200 V11.56  showing manfacturing date 26-03-12).
    Adjustment of display brightness is very basic and important feature in any phone, how come NOKIA forgot it in this model (NOKIA ASHA 200) ??
    Thanks,
    Raven777

    The manual display brightness option should be added to the device in the 11.81 (or newer) SW updates - so try updating your phone SW. 
    http://www.microsoft.com/en/mobile/nokia-x-updates/
    http://www.microsoft.com/en/mobile/nokia-x2-update/
    http://www.microsoft.com/en/mobile/asha-software-update/
    http://www.microsoft.com/en/mobile/support/software-update/wp8-software-update/
    http://www.developer.nokia.com/Community/Wiki/Nokia_firmware_change_logs
    https://twitter.com/LumiaSWUpdates

  • Nokia X6 Display brightness in sunlight

    Hi
    Probably a daft question but has the display brightness in sunlight been reduced with the v30. and v31. firmware updates?
    I have this impression but then I am not 100% sure, I have bought my mobile in December and we haven't had many sunny days since.
    Could anyone else confirm or disagree?
    Thanks

    After looking at an X6 on v31 and another on an earlier firmware I couldn't see any major difference in screen brightness.
    Like many touch phones from last year the X6 just isn't that good in bright sunlight. I recommend you use a light coloured theme as it will make viewing outdoors significantly easier than when using a dark theme.

  • Adjust display brightness in X3

    How do I adjust the display brightness in Nokia X3. I searched everywhere I could but couldn't find an option to change the brightness.     

    this cant be changed on this model
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • N82 Display Brightness, Whats Going On Here?

    Right I have N82 (v20) firmware and my university mate has N82 (v11).
    my mates display brightness on half way is brighter than my n82 display brigthness which is set half way.
    how come nokia decided to limit this in v20 firmware?
    If you find my post useful then click on
    Kudos!Nokia N96 (v20.050 / RM-247)
    www.shaysoft.net | Competitions!

    @ psyhcomania
    dis is wat some else stated on the other post. but this is for the n78.
    "i discovered that the brightness now depends by the sensor near front camera! if u put the n78 under a lamp 4 few secs it'll be soooo briight! then if u close the lamp u could see the brightness going down! this sensor is reallyreally sensitive with the firmware n° 11.043!
    i found another problem: the speakers quality. It's really bad if u put the volume at max! i hoped it will improve with the firmware uptading... but it was just a hope N73's speakers are better! "
    maybe its a new kinda of features or something.
    If you find my post useful then click on
    Kudos!Nokia N96 (v20.050 / RM-247)
    www.shaysoft.net | Competitions!

  • The display brightness on my macbook pro is not working

    I just bought a macbook pro in June and the display brightness keys are not working, nor is there a scale I can find in the system preferences to adjust the lighting level across the screen. Why is that and how do I fix it?

    Go to System Preferences>Displays. You can adjust brightness there. Also make sure that the "Use all F1, F2, etc. keys as function keys" are unchecked in the Keyboard preferences.

  • Dimming Display Brightness to Zero

    Hello All,
    I have been having a problem with the display brightness adjustment for a long time. Basically, the display of my 17" 1GHz G4 cannot be dimmed to black. From the System Preferences the display brightness can be lowered with the slider. In the final third however dragging the slider further to the left not only does not reduce the brightness it actually slightly increase it, and the display start to flicker.
    Any ideas what could be the cause?

    That model doesn't support dimming the display brightness to zero, except through Energy Saver (which may not work with all third party USB devices), or a screen saver that has a picture that shows nothing but black. Some third party hacks dim the display, but they are not necessarily that reliable.
    Only Apple's notebook displays dim to full black.

  • Default Display brightness is too high.

    Hi, i am using latest B2G 2.2 [2014-10-08, flame phone]
    Default display brightness almost 90%,
    Every time i update firmware, i set this value to 10%.
    i think this value is too high, it consume more battery.

    Hi, my point is default value is too high,
    it affect battery life.
    user some time forget set this value,
    so i think this value should be changed by default.
    now, i set this value to 0%
    indoor, i can see my flame screen clearly with 0%

  • X230 display brightness changes automatically

    Hi,
    I have a problem when I'm using my X230 from battery: every know and then the display brightness changes, it gets lower (even without any user activity). Also it seems that the color profile also changes, colors look washed out. After few minutes or sometimes seconds, it goes back to normal. However, I have this issue quite often.
    Is there a solution? Is it something to do with my power settings?
    Thank you.
    Solved!
    Go to Solution.

    zombyorc,
    Try the following.
    http://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/Disabling-Auto-Screen-brightness-on-Intel-HD-G...
    or
    http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T410-screen-brightness-dims-washes-out-on-b...
    *Non Lenovo employee*
    I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =)

  • Display brightness control not in Prefs Pane

    I'm using an Apple 23" sinema display. The brightness control used to appear in the System Prefs, but it no longer shows up. I unplugged all peripherals, but I can no longer get the slider to appear. Any thoughts?

    Display brightness is done via USB.  Is the display's USB cable connected to the computer?  With older (plasic case) Apple displays, the USB circuitry can fail.  This can cause problems with the brightness slider, USB ports on the display, and computer sleep.  Unplugging everything from the display for a few minutes may fix it for a while.

  • Cannot adjust display brightness via F-keys nor Preferences

    After updating Mavericks to 10.9.4, I cannot adjust the display brightness. Using the F1-2 keys will show the brightness icon that usually pops up. However, it's stuck and nothing happens when I press either F1 or F2 (the brightness keys).
    I tried going into Preferences and adjust the brightness from there. "Automatically adjust brightness" is not checked and when I drag the slider, it slides back to where it initially was.
    How can I fix this problem?
    Thank you in advance,
    Filip

    Hello Gnazty,
    Thanks for using Apple Support Communities.
    I'd like you to reset your SMC and PRAM as the articles below describe:
    OS X Mavericks: Reset your computer’s PRAM
    http://support.apple.com/kb/ph14222
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    Take care,
    Alex H.

  • MacBook display brightness will not adjust

    My MacBook display brightness is very low level, the F1 and F2 brightness keys bring up the transparent window and show brightness turned all the way down, but F2 does not increase the brightness. In Preferences, the display section shows the Brightness slider all the way to the top, and if I attempt to slide that down it snaps back to the top, and the actual screen brightness does not change from very low. I also have verified that the function keys are NOT set to lock out the brightness function, so pressing command and F1/F2 does nothing. So nothing from previous forums seems to apply! All other function keys operate properly (multi-window, volume, dashboard).

    OK guys, think I found a solution to this one.
    My girlfriend's mac had the same problem as yours, and I was motivated to fix it becuase I needed to use my mac for my dissertation and she kept stealing it!
    anyway, turn the brightness all the way down, press it up once and you will see the screen flash. do it again, really fast up and down up and down and the scree will stay on as long as you keep playing with the buttons.
    next, use this temporary fix to get into system preferences -> displays... and change the resolution to something considerably lower. then it stays on permanently. Not too sure about why this happens, maybe the mac can no longer handle that many colours or complexities?
    sod it. enjoy.

  • Is iphone 6 plus display brightness lower compared to iphone 6

    My iphone 6 plus display brightness is lower compared to iphone 6 at full brightness is it normal

    No.
    Apple specifies the same "brightness" for both models...500 cd/m2.
    You can read more here:
    http://www.displaymate.com/iPhone6_ShootOut.htm

  • Display brightness setting doesn't stick on power cycle

    The display brightness setting doesn't seem to stick during power cycles on my new 13" i7, it almost always sets itself to full brightness when I turn it on. This isn't really a huge deal but it is kind of a nuisance as I typically keep it around half, why should I be turning it back down every time I boot up???.
    I have un-checked the box through settings for adjusting brightness based on ambient light, and made sure it is in fact staying un-checked.
    I have also reset PRAM a few times now which seems to provide a temporary fix only. After a day or two it's back to square one again.
    Any ideas, or is this a bug that there's currently no fix for?

    Quote from: zankou on 11-June-13, 23:02:54
    Hi, I have recently bought GE60-0ND notebook with Win8 preinstalled which I got rid of in a second I got home, reinstalled with my licensed Win7. Half of things didn't work so I flashed the correct firmware. From that point on everything works perfectly, only brightness control is broken. I simply cannot control my monitor's brightness with my special keys nor in power control setup. So I googled.. and some smart guy recommended a bios flash as well. But when I try, it says either "Problem getting flash information" or "Problem getting bios information".
    Any thoughts how to get the brightness control work?
    Thanks for any kind of advice 
    Did you switch the BIOS and the EC Firmware to the Windows 7 counterparts?
    You may want to ask Svet about that error.

Maybe you are looking for

  • Why is Messages so incredibly awful?

    But seriously. Allow me to elaborate: Messages cannot order messages according to timestamp to save its life. I ONLY use my phone number to send and receive messages on BOTH my iPhone and on my desktop. I don't use an email address or anything else.

  • The lock and volume button's no longer work on my iPod Touch 3rd Generation?

    I've had my iPod Touch 3rd generation for about two years now, and have had hardly any problems with it... but now the lock button on the top of the ipod and the volume control button on the side of my ipod no longer work. Because the lock button won

  • Bill paid, but still shows as outstanding

    Hi, i recently contacted billing about this but haven't had a response. I paid my bill 2 weeks ago but it still shows as outstanding on my account. I don't want to be cut off again so i really need it resolved. I used an old bill to pay it as i could

  • Basic doubts regarding ssl with tomcat 5.5  and netbeans 5.5 for WSDL?

    I've just started my preparation of web services. I'm using JAX-WS to create my web services and client. I'm using Tomcat 5.5(not apache axis) to deploy my web services over https and i'm able to do that. I've configured my keystore and keystorepassw

  • IOS Simulator on Xcode 4.6 / 5

    The iOS simulator for iphone or ipad is very big and shows a scroll bar to check app's view, can this view be changed to normal regular size one where it shows the entire iphone/ipad properly and no scroll bars?