NOKIA C3-00 Urgent how to avoid activate GPRS and ...

Hi
I just got this mobile phone from Rogers last week. I have to say its connection function is cool. But I am so scared by the appearance of G and E on the top of screen when I am out of the Wifi zone that I connected before. At first, I set the mail and facebook account as automatically refresh. But now, I have to turn them off before I am clear how to completely avoid using GPRS or E (actually I don't know what does this E mean, but someone tell me this means my operator will charge me as well).
I tried every setting on my phone, but still I am not quite sure if that will work or not. I wish to set the account of mail and facebook as automatically refresh, but I don't want it to use GPRS or E.
I checked the website and found many people are complaining about this point, and no body could give a perfect and guaranteed answer. So if some one from the NOKIA professional team can give me the answer, I will be very appreciated.
I don't want those GPRS data to eat up my bills. So please!!!
Thank you so much.

You can find the phones configurations under: menu>settings>configuration>default config sett. Word of warning operators settings typically include all the settings (MMS, GPRS, Browser etc.) so deleting them could cause some of the phone operations to stop working (like MMS).
One other possibility is to make a access point settings which is garbage to do this go to: menu>settings>configuration>personal conf. sett.>add>access point>access point settings>bearer settings>packet data acc.pt. and put something garbage there and then save the settings and make them default
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

How to avoid purchase req and stock transport order to take part in MRP.

Please suggest how to avoid purchase req and stock transport order to take part in MRP.

hi,
check the settings for the MRP type...there you need to show which doc will be taken into considerations...
SPRO >> MM >> CBP...
Under CBP check for the MRP settings where it is placed(check under master data settings)...and check for the indicator for PR's and STO's release orders under tab "Additional external req. in the reorder point planning"..
Regards
Priyanka.P

How to avoid the Amount and Date values for VOID Cheques

Hi All,
I had created a two window i.e For Amount and Date. If I process the cheque the Amount value and Date should not trigger for VOID CHEQUES.
Can any one tel me how to avoid the Amount and Date values for VOID Cheques
Your help will be greatly appreciated.
Regards
Yathish

Hi,
I dont know which tablel you are referring to, is it PAYR table and the field VOIDR?
If a cheque is voided, it would have a reason and it is stored in VOIDR field of this PAYR table.
Check if the field VOIDR is filled, if it is filled, do not print the amount and date.
Regards
Subramanian

How i avoid this window and directly fetched date

hi master
sir i have three options button when i select anyone then my query change and fatch new data
but before fetching data system show new windows with this message
Do you want to save the changes you have made ?
with yes / no /cancel button
sir how i avoid this window and directly fetched date
or how bypass this message
please give me idea

bro, when u execute the query to fetch records it tries to validate the form and pops an alert message. if u want to avoid it do this
change : execute_query;
to: execute_query(no_validate);
now it wont ask for validation of the previous records present on the form, but make sure such actions are not not a threat to data integrity.
zaibi.

How do you activat siri and has siri com to norway ?

how do you activat siri and has siri com to norway ?

Settings > Siri > Siri > ON
Siri is still in beta testing and is not yet localized for Norway nor support the Norwegian language.

How to avoid output file and error lines when condition does not match

Hi Experts
A customer want to send purchase order files to several vendors and each vendor has their own requirement to content and file format. I have prepared scenarios for each vendor and a template is (conditionally) called when CardCode matches. It works fine, - PO file is generated when CardCode matches, but error lines are written to SAP B1 Control Center each time CardCode does not match the one defined in a scenario (100 or more times per day). Problem is that these error lines does not get automatic deleted. Conditional processing are made in this way:
Result Message in SAP B1 Control Center when CardCode does not match:
I tried to avoid an error line in SAP B1 Control Center when CardCode does not match in this way:
Then no error lines are written to SAP B1 Control Center, but an output file is generated each time (order file when CardCode matches and an empty file when CardCode does not match).
Any suggestions on how to avoid both errors types (error lines in SAP B1 Control Center and empty output files)?
Or - can lines in SAP B1 Control Center be automatic deleted?
Regards
Steen

Hi Steen,
using <b1im_skip> should be the right approach, if you're working with B1 OUTBOUND.
Following extract form the B1i help describes the usage to skip the outbound processing:
1.1 Skipping Outbound Processing
If you do not want to hand over the message to the receiver system, the scenario step can create a special tag that indicates to generic processing in the integration framework to skip the message processing.
Add the following to the final transformation atom (atom0):
<b1im_skip xmlns= ”” info=”my info” msglog=”true” msgout="yes">
If the integration framework skips the message, it puts the message log information to the Filtered section, if the message log is switched on. The result message contains the Message skipped by vBIU logic information.
info
To display an individual message, define it using the info attribute.
msglog
If you want to avoid an entry in the message log, introduce the msglog attribute and set it to false.
msgout
To display the skip information in the Success section of the message log, use the msgout attribute and set it to yes.
In case you don't want any MsgLogEntry in case of a skipped message, please enter the following in final atom0:
<xsl:template name="transform">
<xsl:attribute name="pltype">xml</xsl:attribute>
<xsl:choose>
<xsl:when test="$msg/BOM/BO/Documents/row/CardCode='C20000'">
<xsl:call-template name="transform2"/>
</xsl:when>
<xsl:otherwise>
<b1im_skip info="skipped" msglog="false"/>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
Best regards
Bastian

Urgent : how to calculate sub total and grand total in smart forms

Hi Friens..how to calculate sub total and grand total in smart forms..How to print them in smart forms...Also kindly explain how to handle events in smart forms..Thanks in advance

Re: Subtotal with Table Node in smartforms

Urgent: how to avoid automatically generate dynamic ACLs?

PIX501 v6.3(3)is configured as Easy VPN client and authentication is done on
ACS server.
Downloadable ACL is applied to this vpn h/w client after the VPN connection
is established (shown in blue colour in the sh access-list output).
However, the are 2 dynamic ACL applied to the same connection which
override the downloadable ACL as defined in the ACS server for this VPN
group.
Question: How to get rid of the 2 dynamic ACLs as shown below?
access-list dynacl128; 1 elements
access-list dynacl128 line 1 permit ip any host 218.189.206.74 (hitcnt=0)
access-list dynacl129; 1 elements
access-list dynacl129 line 1 permit ip any FBP_Staging 255.255.255.0 (hitcnt=1)

I think it is not possible to avoid automatically generated dynamic ACLs, you may have to use some other interface for this or configure PIX with proper VPN configuration for client.

How to de-activate Qty and Price fields for Service purchase requisition

Dear all,
We have a request to de-activate (leave it as "Display") the fields of quantity and gross price when changing a service purchase requisition of a specific document type.
In example: We want that purchase requisition type NB, allows in change mode (ME52 or ME52N) to change the quantity and gross price of the services. On the other hand, these two fields must be only visible for order type ZNB. Besides this must be happening only for services.
Changing PT9 or PT9B will affect also the creation, and if we only configure based on transacction and document type does not work.
Any help will be highly appreciatted.
Cheers

Hi,
You may have to write a output requirement routine and assign the same to the output type in NACE.
But i don't think you will get the old and new data of Purchase order in requirement routine (program : SAPLV61B). You may have to export the data into memory from either a BADI method or User exit and then import the same in requirement routine.
Regards
Vinod

Urgent - How to join multiple facts and dimensions in OBIEE rpd??

Hi,
In my RPD I have 3 facts and 4 dimensions and the joins defined are as below
Physical layer - All joins are FK and inner (1:N)
FACTA-------------- DIM_TIME, DIM_CUST,DIM_CAL
FACTB-------------- DIM_TIME, DIM_CUST,DIM_CAL
FACTC-------------- DIM_TIME, DIM_CUST,DIM_CAL, DIM_XYZ
BM layer - All joins are complex, inner
The logical table F1 pulls columns from FACTA, FACTB and FACTC . Complex join exists between all 4 dimensions DIM_TIME, DIM_CUST,DIM_CAL, DIM_XYZ to logical table F1.
Issue: I need to build a report with $ column from FACTA, FACTB and FACTC and need to add filter conditions using columns from DIM_TIME, DIM_CUST,DIM_CAL, DIM_XYZ.
However when ever I add a filter condition from DIM_XYZ the physical query generated is not generating code to access data from FACTA and FACTB. Instead it is subsituting a NULL and just pulls data frm FACTC.
My Questions: What is the best way to build the physical and BMM layer using FACTA, FACTB,FACTC, DIM_TIME, DIM_CUST,DIM_CAL and DIM_XYZ??
I need to resolve this issue ASAP so any help is appreciated. Thanks
Edited by: user11935561 on Feb 10, 2010 6:27 AM
Edited by: user11935561 on Feb 10, 2010 6:28 AM

You can find the same issue in
Logic of queries in OBIEE
or
Connection between 2 fact tables
Follow the link
http://there-n-back-again.blogspot.com/2009/04/oracle-analytics-how-to-report-over-non.html
Put 'All' or 'Total' at levels for dim_xxx for those facts you need in your report from facta and factb
Regards
Nicolae

Help-urgent - how to update service pack and apply patches for ADS

Dear all,
   I've just download the sp 11 and the patch ,how should i update my ADS? I've try to search the forum but to no avail. Pls advise,thanks.
Regards,
Joan

Hi Joan,
To deploy an SCA or SDA, proceed as follows:
      1. Make sure you have downloaded the SCA or SDA from SAP Service Marketplace.
      2. Start the SDM GUI. To do this, execute the following file:
            a) Windows: RemoteGui.bat in folder \usr\sap\<SID>\<instance>\SDM\program
            b) Unix: RemoteGui.sh in folder /usr/sap/<SID>/<instance>/SDM/program
      3. The SDM GUI screen appears.
      Note: With SAP Web Application Server 6.30 the SDM server is started whenever you start the SAP system. To check whether the SDM server is running, use the tools SAP Management Console (Windows) or jcmon (UNIX).
      4. Choose "SDM Gui -> Login" or the icon "Connect to SDM Server". The dialog box "Enter Login Information for SDM Server" appears.
      5. Enter the following information:
            a) Password
            The initial password is "sdm" (without quotes).
            b) User description (optional)
            c) Hostname
            d) Port
            With instance number 00, the default port number is 50018. If your instance number is different from 00, the port number changes to
            Port = 50018 + 100 x <instance number>.
            You have to calculate the new port number and enter it manually.
      6. Choose "Login". The SDM GUI appears.
      7. Choose tab "Deployment".
      8. Choose "Add SCA/SDA to Deployment List (Local File Browser)". A file selection screen appears.
      9. Select the SCA or SDA file you would like to deploy and choose "Next" to read the information on the following screens.
      10. Choose "Next" until the "Start" button appears.
      11. Choose "Start". After the SCA or SDA has been completely deployed, a success message appears.
      12. Choose "Confirm" to return to the SDM GUI.
      13. When you have finished work, log out from the SDM server. Choose "Deployment -> Logout" or the icon "Disconnect from SDM server" for this.
If this answers your question, please mark the question accordingly and do award points if helpful.
Regards,
Arafat

How to avoid the summation and grouping in querry

Hi Experts!
when i do the simple query with
Documents dates in a rows
Debits as a key figure,
query groups the dates and sums up the Debits.
1) Although I want to see all dates with debits not summed up and postings dates not grouped
2) i want to count all dates when debit postings were done (and other option count them by month).
Regards, Andrey

Hi,
You can avoid grouping by clicking on the button <b>Table Display</b> in Query Designer. This is the fourth button from last. It has 3 purple color boxes in it (■■■). this will display the query in table format.
In the same Query Designer right-click on the object, click on properties.
Change <b>Supress result row</b> combo box to Always. This will supress the result.
regards,
Pruthvi R

'Merge Cell' is greyed out - how do I activate it and merge two cells together?

I am just learning Numbers, trying to merge two cells together should be a very simple process!
I have followed the instructions in help
The 'merge cells' function remains greyed out no matter what I do - I therefore cannot merge two or more cells into one!
Please help, is there something I need to activate in the cell?

Hi Claudia,
Actually, a "truly blank document" would be an empty canvas, containing no table of any type, no document header or footer locations, no document margins, no page definitions, no page orientation. Just a blank sheet onto which you could put whatever objects you wish.
Perhaps Apple should have named the 'not blank' templates "Basic" rather than blank, removed the header column, and left the header row intact. That would match the "Basic" table style available in the Tables button's menu, used for adding a table to a Sheet.
If you really do want to always start with a table which has no header rows and no header columns, it's easy enough to set up.
Open a new 'blank' document (Apple's 'blank').
Click on the Table 1 icon in the Sheets list and press delete. (faster than selecting cell A1, then taking two trips to the Table menu to delete first the (header) row then the (header) column)
Click the Tables button and choose Plain to insert a 'plain' table (no header row, no header column)
(optional) Add or delete rows or columns to make the blank table the size you desire.
(optional) Position the table where you want it.
Save the result as a Template.
In Numbers Preferences > General > For New Documents, select Use Template, then Choose your new template.
Until you change that preference, any New document you make will contain your new, 'blank' table.
Regards,
Barry

How to avoid ORA-01918 and ORA-00959 while impoting a dump file

While importing a dump file, I encountered the ora-01918 (user does not exist) and ora-00959 (tablespace does not exist) errors. This has occurred due to the fact that the user and tablespace mentioned in the dump file did not exist in my database.
Is there a way to avoid these errors via specifying some values to IMP parameters?
Appreciate help.

user7864190 wrote:
While importing a dump file, I encountered the ora-01918 (user does not exist) and ora-00959 (tablespace does not exist) errors. This has occurred due to the fact that the user and tablespace mentioned in the dump file did not exist in my database.
Is there a way to avoid these errors via specifying some values to IMP parameters?
Appreciate help.If you import with FULL=Y parameter (and of course if you exported with FULL=Y), imp will create tablespace and users.
imp full=y file=xxxxxxxxxx.dmpOn the other hand, it could be better to create tablespaces manually (according to your disk structure)
Btw, this is wrong forum. :)
Regards
Gokhan

How to Avoid the Tax and Shipping point and plant redetermination

Dear experts
my business requirement is to change the Ship- to address while creating the sales order . Due to this my taxes and shipping/plant data get re determined . The order type i am using triggers to planned order and availability check .
When i change the address of ship to the proposed date gets changed and effects the delivery planning ,
Please suggest a way if i chnage the address of SH during sales order creation or change ( VA02) . my shipping data should not determined and the availability check wont carry out
Regards
Vinay Kr Joshi

HI,
if you change the ship-to-adress, in my oppinion it is right, that there is a new planning.
if you wont have this planning, you should set the dates fixed in the availability check. sign date and quantity fixed.
Hans

NOKIA C3-00 Urgent how to avoid activate GPRS and ...

Similar Messages

Maybe you are looking for