Nokia c3-01 camera = 1.3 M (NOT 5!!!) = bad qualit...

i didnt expect that ill got a very bad pictures from a 5 MEGAPIXEL camera!!
all the pictures, videos i toke with it ARE GARBAGE!!!
My 5 years old SA.....NG with outdated 2 megapixel camera takes much much better pictures with it!
NOKIA FAILED HARD this time
Just to prove its garbage camera, try to take a picture while slightly moving it = BLURRY PICTURE!
im just ripped off by nokia, thats what im thinking about it

1. Yes its not a bug. Early versions of Android did not support flash on video as well, they needed a whole new OS update for that. An entirely new camera software should be written for that which can only be done via a new OS update. I doubt it possible on a firmware update.
2. I said "headset". So you can buy a Nokia 3.5mm adaptor with music and call controls which works even when phone is locked.
3.
4. Your phone is supposed to have automatic brightness control. And you could try searching for other apps for your phone outside of Ovi Store. Ovi Store is actually just new. There are a lot of independent developers with apps in other sources. This has been the norm for almost 10 years of Nokia phones.
5. Yes I've experienced it on a 5310.
6. A process is a task... Plus as I already mentioned, the phone's CPU is weak, and it cant support a CPU intensive process like calling with any other process.
RS 8.7k? A C3-01 in my country costs around 8500PHP, and for the record, I consider it a lower-midrange phone. The problem is that its price is determined by the build and look, not the feature and capability. If you wanted something with all the capabilities you mentioned, you should have bought yourself a Symbian phone. Most of them are more expensive than your phone, but there are a few that are about the same price.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Similar Messages

Mah nokia lumis 710 camera not working... what to...

mah nokia lumis 710 camera not working... what to do????

When you try to open the camera either by hitting the camera key or going to the app list, what happens?
1. Reboot the phone. Press the volume down and power keys together for 15 seconds until the phone vibrates and starts up.
2. Check that the software of the phone is updated.
3. Reset the phone by going to Settings > About. This deletes all the content of the phone so make sure to create a backup copy of your files. See "Reset and restore your phone" in this link to backup important data on the phone: http://support.microsoft.com/kb/2606900.
If above steps would not help, bringing the phone to a Nokia Care Point is what I'd suggest: http://www.nokia.com/global/support/locations/

Nokia Lumiya 530 Camera Problem

Hello Ser ji my Nokia Lumia 530 Camera Zoom Not Working Please Help To Work my camra Zoom please

farby is correct, SwtBharat. The Lumia 530 does not support camera zooming. However, you can zoom in the photo to enlarge details after you have taken a photo. Place 2 fingers on the screen, and slide your fingers apart. To zoom back out, slide the fingers together.
For any feedback and suggestions, feel free to post it here: https://windowsphone.uservoice.com/forums/101801-feature-suggestions. Hope this helps.

Nokia 3500 Classic Camera standby mode

Somehow my Nokia 3500 Classic Camera , While opening the camera its showing as camera standby, so how i can solve this issue?
Help me quickly Pleaseeeeeeeeeee
PraveenB

update your phone software by your self connect your phone with data cable to pc on pc suite mode then open nokia software updater the serach and there is a new update click ok yes to update the software during thiz update period do not disconnect the data cable and last your software is completed your phone may be stop working until its start do not disconnect
silvi

CAMERA ON STANDBY & DO NOT KNOW HOW TO CHANGE IT

CAMERA ON STANDBY & DO NOT KNOW HOW TO CHANGE IT?
Since the phone has come back from repair I can not use the camera feature, I have no idea how to remove "Camera on standby"
Regards
John

They always perform a software update after a repair, but it sounds like in your case something went wrong here.
You don't say what kind of phone you have. If it is an S60 "Symbian" model, you can reformat it with the code *#7370#; if the phone is compatible with NSU (www.nokia.com/softwareupdate) you could reinstall the latest software yourself using your PC.
Failing both of those, you would have to go back to the repairer and tell them a new problem has been caused by the work they did.
Message Edited by mccbleue on 23-Feb-2009 07:57 PM

X2-02 camera issues - .nrw files not converting to...

I've got X2-02 and am experiencing the same problem on this link: http://discussions.nokia.com/t5/Cseries/C2-02-camera-issues-nrw-files-not-converting-to-jpeg-files/m...
I tried all of the tricks mentioned and nothing became fruitful in converting the files to jpeg (viewable on PC).
Anyone who has a solution to this, kindly post it here...!
Moderator's Note: We have moved your post and changed the title into a subject-related title. This is to keep the forum organized and let other forum users easily see and respond to this post.

imranshahab,
Welcome to Nokia Discussions!
Try this online image convertion site: http://bit.ly/1dyiDQm
Or try sending the .nrw files to another bluetooth capable phone and see if it does convert the file to jpeg after receiving it.
Good luck

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says
'' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information. ''
When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says
'' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance.
Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''
I dont know how to get around this please help

CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras

How do I add photos to the camera roll that were not taken on my iPad? I imported photos to my iPad from my camera, and now I want to add them to my camera roll which is sync'ed with Dropbox as a back up mechanism.

How do I add photos to my camera roll that were not taken one my iPad? I have iMported photos from my camera to my iPad. Theses photos are in the imported photo album. I want to move these photos to my camera roll but can't figure out how to this. I want them in my camera roll because that is the album that syncs with Dropbox where I want to backup my photos. Thank you for your help.

Consider using sshfs to mount your Pi from your Linux boxes. It's much easier to configure and manage than samba. It sounds like you already have your Windows machines mounting your Pi so Samba is doing its job in that respect.
More info on sshfs in the Wiki: https://wiki.archlinux.org/index.php/Sshfs
To help get you off the dime, here's a modified line from my fstab that I use to mount my Pi with:
gav@PI:/mnt/backup /mnt/rpi/backup fuse.sshfs rw,relatime,user_id=0,group_id=0,allow_other 0 0
Subsitute my mount points with yours.
For a password-less mount:
ssh-copy-id gav@PI
after you've set up ssh and generated some keys on your client box.
Here are some relevant lines from the smb.conf file on my Pi that I use for my one Windows box in the house that might help you with your write permissions:
security = user
hosts allow = 192.168.1.0/255.255.255.0
guest account = gav
; And my share setup:
[rpi]
comment = Public Stuff
path = /mnt
writable = yes
; printable = no
; write list = @krb
[torrent_dl]
path = /mnt/video/torrent_dl
writable = yes
create mask = 0770
directory mask = 0770
guest ok = Yes
case sensitive = No
read only = No
Hope this helps.

Hi, I just downloaded and installed Photoshop cc and the Camera Raw version is not the latest one available,so now I can no longer open files from my Nikon D750! Can I update ACR?

I just downloaded and installed Photoshop cc and the Camera Raw version is not the latest one available,so now I can no longer open files from my Nikon D750! Can I update ACR?
I have been using the new version of ACR with PS6 and have been able to open the D750 files,now I'm stuck.
Thanks,
Greg E

You were probably using the Release Candidate version of camera raw 8.7, which one gets from Adobe Labs.
http://labs.adobe.com/technologies/cameraraw8-7-cc/index.html

I am making an iMovie trailer on my iPad 3(updated) and I recorded a few clips on my iPad Camera but they are not being detected on the iMovie Videos section. How can I make them show up?

I am making an iMovie Trailer on my iPad 3 (updated) and I recorded a few clips using my iPad Camera but they are not being detected on the iMovie Videos scetion. How can I make them appear so I can use them in my trailer?

Hi Stuck-in-NY,
If you are looking to transfer your purchases to your computer, you may find the following article helpful:
Apple Support: Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Regards,
- Brenden

Camera Roll Photos does not sync to Ipad2 using icloud

Icloud camera roll photos will not download my camera roll to my ipad 2, only will download the phonestream photos. Can someone tell me how to get the camera roll photos to sync on ipad.

Welcome to the Apple Community.
Only photos taken after turning on Photo Stream will be added to Photo Stream and synced between devices.

I have restored my new replacement iPhone 5s from my latest iCloud back up. However my camera roll pictures are not displaying. Its not saying i don't have any pictures, it just shows empty white squares? How do I get my pictures back? Thanks!

I have restored my new replacement iPhone from my latest iCloud back up. However my camera roll pictures are not displaying. Its not saying I don't have any pictures in my camera roll, it has all the spaces for them, but it just shows empty white squares? How do I get my pictures back? Thanks!

It's difficult to say whether it's stuck or not as the time to restore a backup can depend on many factors. You'll have to decide when you think it's just not continuing. You could try turning the phone off (hold the power button until you see the red off slider, then slide to turn off), then back on to see if that would get it going again.
When you're convinced it's just hung, you can go back to settings and tap Stop Restoring iPhone to stop the restore. You'll then have to try restoring it again (Settings>General>Reset, tap Erase All Content and Settings, go through the setup screens and when given the option, choose Restore from iCloud Backup). Be sure it's connected to your charger and wifi while it's restoring the backup.
You might also try the approach posted here by ezjules: https://discussions.apple.com/message/19518589#19518589. This seems to have worked for some people who had trouble restoring their photos from an iCloud backup.

What do I do with this error? "could not complete your request because the file appears to be from a camera model which is not supported by the installed version of camera raw?"

what do I do with this error? "could not complete your request because the file appears to be from a camera model which is not supported by the installed version of camera raw?"

It can be that you have an old version of Photoshop Elements and a new camera.
Please tell us
Which operating system you are running on
Which version of Photoshop Elements you are using
Which camera the raw images come from (Make & model)
Brian

CS5 RAW Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information.

I rented a Nikon D600 & D610 and CS5 cannot open the RAW files, i do not have any issued with my D700 RAW files. I am getting this error message -
Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
Please visit the Camera Raw help documentation for additional information.
Can anyone please help?

yellowmledbetter wrote:
Sorry, I am on a MAC. I downloaded the link you provided and it's giving the same error message as above. Running CS5.
The error message you gave is from Camera Raw. I thought you said that DNG Converter didn't work?
The link I gave you is an article on getting your raw files to open in Camera Raw. Did you read it? I lazily gave you the link because this is one of the most common problems in this forum, and I get tired of saying the same thing over and over again. I could break it down for your specific case, but I was hoping you could read through the article and work it out for yourself.
But, here goes:
Your cameras are newer than your raw converter, so it won't understand them.
CS5 comes with Camera Raw 6, which can only be upgraded as far as 6.7.1. You can find out which version of Camera Raw you are running in three ways: in the settings title bar (Cmd-K), in the plug-in title bar (press F to start/stop full-screen mode to reveal the title bar), or Photoshop's Help menu (About Plug-ins).
Downloading raw files from newer Nikon cameras with old versions of Nikon Transfer will actually make them unreadable in Adobe software. They can be fixed with a free utility. Again, it's all in the linked article. You should be using up-to-date Nikon Transfer, or Adobe Photodownloader to avoid this problem.
All being well, you have good raw files on your computer. You can convert them to dng using Adobe DNG Converter. IF you are on OSX Leopard or Snow Leopard, you CAN'T use the latest version, because Adobe stopped support. But, if you ARE on a later OSX, you can download DNG Converter 8.6.
DNG Converter is designed to convert FOLDERS of raw files at a time. You select a folder of raw files, and tell it to create DNG copies. BUT, you have to set up the converter before you start using it...
If you load up DNG Converter, you'll notice a button labelled "Change Preferences". Clicking this, you'll see the first option is "Compatibility". Here, you must select the appropriate setting for the version of Camera Raw you HAVE (see above). If you can't work this out, just pick "Camera Raw 5.4 and later". THEN pick a folder of raw files and convert them to DNGs.
All the above is already in the article, but I gave you a personalised response. If you still can't get it to work, please give us more than one sentence. Tell us exactly what you tried, and describe exactly what happened. Which version of OSX you're running, what device and software you downloaded your raw files with, how you used DNG Converter, and so on.
I really should be in bed.

"camera raw editing is not enabled"

MAC OSX 10.6.2
PS CS4
Adobe Bridge CS4
I have a problem with camera raw: "camera raw editing is not enabled" pops up when i right-click on a picture, in adobe bridge, and I try to open with camera raw :-(((
Could you help me please? i tried many of the solutions on the forum (some of them I did not understand so I did not do it), but they didn't work...

hello,
i have completed all the steps, and it still does not work, here is what i
get when I right click on a picture to open in camera raw (attached pic)
Hélène.
2010/2/3 Omke Oudeman <[email protected]>
Could you check inBridge Preferences under start up scripts if you have at
least checkmarks in front of Adobe Bridge and Photoshop:
>
You should have only ACR plug in isntalled on your system, could you check
if it is in the right place"
>
Here is a copy of the ACR plug in instructions:
>
Mac:
1. Exit Photoshop CS4 and Adobe Bridge.
2. Open the download file and double-click CameraProfiles.dmg and follow
the
on-screen
instructions.
3. Open the Finder.
4. Navigate to the root of the local disk (not the user¹s home folder).
5. Navigate to Library/Application Support/Adobe/Plug-Ins/CS4/File Formats.
6. Move the existing plug-in to another location (for example, a new folder
on your desktop). Ensure
you keep this version in case you need to revert back.
7. Copy the Camera Raw plug-in, Camera Raw, from the download into the same
folder as in Step 5.
8. Launch Photoshop CS4 or Adobe Bridge.
>
>
>
Ok, I just did it, and it is still the same problem.
thanks
Hélène.
>
>

Nokia c3-01 camera = 1.3 M (NOT 5!!!) = bad qualit...

Similar Messages

Maybe you are looking for