Nokia c3-01 configure Next appointment on startscr...

is there a way to see the next appointments even if its on the next day e.g. the next 24 hours.
i see max 3 appointments but only the ones today. if the last appointment today is done on the startscreen i cant see that the next appointment is tomorrow morning.
is there a solution?
and is there a possibility to show the year on startscreen? only see day month weekdayname
thank you
M.

Sorry Brother, Your Device is totally misfunctioned and FAULTY, You Need to go back to Nokia Care Centre and GET IT REPLACED.
Your Device is faulty.
Please Dont Blame Nokia Or the C3-01 Device Because both are QUALITY PRODUCTS.
I have C3-01 Since 4 Months Now and I havent Had a Single Complain about my device even though I am a Rough Handler and Using the Mobile Upto its Extend.
You Have 2 options, Try To Fix your Device at Home By :
Soft reset your Nokia C3-01 Touch and Type you need to press *#7780# and then Dial. The security code is 12345. Once you complete this, your phone will come back to factory settings, but you will not loose personal data. Anyway it is recommended to make a backup before performing any of the mentioned procedures.
To hard reset your Nokia C3-01 Touch and Type you just have to press *#7370# and press Dial. The phone will request the security code that is by default 12345. Please be aware that you will loose all the data in your phone, so you should backup all relevant information.
If Problem still persist then Connect to PC Suite/Ovi Suite and Reinstall the Firmware.
BUT U NEED YOUR DEVICE TO BE UPDATED TO ITS LATEST FIRMWARE = v06.05
If still not fixed then, REPLACE YOUR DEVICE ASAP, because as given by Nokia, C3-01 Device Works according to its Specification as Specified.
If I've helped in any way, a click upon the White star to the left would always be appreciated.
If however my answer also solves your problem clicking below " ACCEPT AS SOLUTION " it will benefit other users!

Similar Messages

  • The message ~There was a problem connecting to the server "your-447023ae6b".appears when I try to play music transferred from my PC to my iMac. Files were transferred from my PC by a Genius. How do I sort it? Next appointment with genius is 5 days away!

    The message ~There was a problem connecting to the server “your-447023ae6b”.appears when I try to play music transferred from my PC to my iMac. Files were transferred from my PC by a Genius. How do I sort it? Next appointment with genius is 5 days away!

    Hi
    Thanks this has helped me solve the problem.
    I used the Outlook Anywhere connectivity tester you suggested. Selected Outlook autodiscover.
    It told me that it could not resolve things on any of the 4 tests.
    I saw that using the last test "Attempting to contact the Autodiscover service using the DNS SRV redirect method", was the only one likely to work in my case.
    I had already changed 3 entries in dns to point at my DDNS address but this had not worked, from the errors I could see that it was just the certificate name not matching so I changed the DNS entries for Autodiscover, autoconfig and _autodiscover._tcp
    to be webmail.domain.com which is a CNAME to my ddns address for the broadband router, which in turn forwards ports 80 and 443 to the exchange server for owa and activesync access. I got an error message saying that I had an illegal entry in my SRV record
    as a CNAME is not allowed, but it saved the change anyway.
    I reran the test and it worked.I can now make new outlook clients attach teo exchange.
    Thank you, after 8 hours yesterday of trying to reolve this I suddnely got it to work on one laptop but the other still would not and had lost track of what I could have changed so had no idea what actually made it work.
    Thank you for your suggestion.

  • How to ask Siri for directions to my next appointment?

    This is making me crazy, and I'm sure I'm just missing something simple: I have an item on my calendar, including the location. I ask: Siri, please give me directions to my next appointment.  Siri brings up the appointment - but nothing else. I then ask: Siri, how do I get there? "Get where?", she responds.
    I've tried a number of different questions to get Siri to give me directions to a scheduled event, but none have worked. (And, I do know that I don't need to say "Siri" or "please", but it's fun!)
    What do I need to ask Siri to get her to pull up either driving or transit directions to my next (or any) appointment/event on my calendar?

    Yes this is very frustrating.  But mores, because this is such an obvious natural usage of Siri when driving, and easily enough to extract the address from the appointment knowing the context of the question.   I'm usually pretty defensive of the aggressive questioning of missing Apple features, but this one should be a no-brainer.  And yet it doesn't work.  And I need it almost every day.
    It seems that the last couple years Siri gets "dumber".  I don't casually write that.  I'm a fan of my iPhone, but more and more I keep reverting to the Google app and it's voice search instead of Siri because IT JUST WORKS so much better.    Except, the google app can interact with the other on-phone apps or data, like your calendar, etc.  So we're stuck with Siri, HOPING that it will improve, yet seems to regress in functionality every year.   (first it was the removal of WolfframAlpha knowledge base for answering datapoint questions, where now Siri just returns a webpage or wiki, not the answer..)

  • Nokia 7020 MMS Configuration

    Does anyone know the MMS configuration for Nokia 7020 on the ATT system?  I cannot picture text at the moment. 

    Hi. I bought an unlocked Nokia 7020 and I'm on t-mobile and figured out how to do this. There was no clear instructions anywhere that I can find, so here's exactly what I did. Hopefully this will help someone else.
    1. I found this on the T-Mobile web site with the access points I needed.
    https://support.my.t-mobile.com/doc/tm21387.xml?do​cid=212&navtypeid=6&pagetypeid=7&prevPageIndex=10&​...
    If you're on some other carrier, try looking on their website. I just guessed customer service probably wouldn't want to help me since I didn't get the phone through them and I hate calling help lines in general because they usually don't know anything and put you on hold. Anyway, that's just me.
    2. On the phone, I went to MENU - SETTINGS - CONFIGURATION - PERSONAL SETTINGS - ADD NEW - MULTIMEDIA MSG.
    3. Where it says Server Address, I entered the "Messaging Server", http://mms.msg.eng.t-mobile.com/mms/wapenc
    4. I changed "Used pref. access pt." to "no".
    5. Then I went into "Access Point" - "Bearer Settings" and where it says "Packet data acc. pt. I entered the "WAP GW IP Address" number, 216.155.165.050
    I didn't enter a "APN Name" anywhere or set any "Data Mode" to "Connection Oriented" and I am now able to send picture messages.
    I hope this helps someone.

  • Nokia email cant configure

    I am using nokia N97. And received mails via nokia email. Now i wish to configure my official mail. when i try to configure its says " We cannot process now. try again later." kindly help to configure. thanks in advance.
    Attachments:
    inf.jpg ‏194 KB

    Anyone can help me??????????????

  • Configuring next button

    I'm trying to configure the "next" button on a slide to do two things:
    1) launch a url in a new window
    2) continue to the next slide
    For example, I want to make sure the user watches the Articulate Engage piece, so rather than just put a link on the page, I wanted to incorporate this into the "Next" button.
    When I tried to just launch the URL from the next button, it does open the new window, but will not go to the next page automatically.
    Any thoughts on how to handle this situation.
    edit: I'm using Captivate 3.
    Thanks, John

    You can attach multiple actions to the button using the advanced actions.

  • Nokia 5130 XpressMusic - Configuration, internet c...

    Hey there!
    I need help with my phone (N5130 XpressMusic). I don't know if it is configured properly cause everytime I try to open Opera Mini, UCWEB, or any other application it says "your phone is not configured properly" or "connection failed" or something like that. Can anyone help me out with this? 
    I also asked Globe to send me my GPRS settings but the reply went like "your phone is not compatible with the setting". How can I browse the internet with these problems?
    PLEASE HELP ME OUT.
    Thank you!

    Nokia 5130 is a GPRS/EDGE enabled handset so there is no reason that the there not b settings for it. U can try the following link. www.my.opera.com/community/forums/topic.dml?id=111​656
    There are many configuration settings available for different countries & operators.
    If u still don't find the settings then call the service provider again & lodge a complaint with them in this regard. Most probably the issue will b resolved the moment u mention a complaint.
    If even this doesn't work then u'll have to change the operator. But before it do check with if any of ur friends or family having same problem with same operator or try using a sim from diff operator on ur phone.
    Please mark the post as solution if it solves your problem.
    Current Device - Nokia Lumia 1020/920

  • Trouble with nokia 5300 in configuring gprs

    Hey....am using nokia 5300..I just activated gprs for my idea connection...But to proceed further i can't add WEB to the personal configuration settings...Its being shown memory full..I made my phone memory 100% free..but still no use..plz help me..... 
    Solved!
    Go to Solution.

    I got the factory setings of my phone restoed..But when i asked for the gprs settings of my phone..It is not getg saved..Itz being shown that "only 70 sets allowed and taht the settings are discarded"....
    Any solution for that...
    plz help me soon!!!!!!

  • MY NOKIA 2626 INTERNET CONFIGURATION

    My old Nokia 2626 is giving me headache. Though it had been worked upon many times by local repairers. Whenever I press the configuration submenu to check the internet setting, the phone will go off momentarily and power on after some seconds by itself. Also whenever I want to use the phone for internet browsing it will inform me that there is no packet data even when the packet data was set at 'Always on' and the G sign shows on the screen. The internet setting was sent to the phone by my network provider.
    Okkenventures

    Each time when you insert the sim, the phone gets internet settings from service provider and they get added up every time.
    In configuration menu goto default configuration and go on deleting all settings except the one you need.
    Later when you press preferred acces point, due to only 2 or 3 access points, the phone wont restart.
    Hope this helps.
    Srikanth.
    -------------------If this post helped you, click on accept as solution.------------------
    -----------------------------Appreciate by clicking on white star.----------------------------

  • Nokia n97 mini - adding next predictive dictionary

    hi guys,
    is it possible to add next predictive dictionary in other language ?
    I'm concerned about that and would like to know if it will be possible to add slovak dictionary if I buy a nokia n97 mini with preinstalled english or czech dictionary.
    thanks in advance.

    it says
    SIM CARD NOT VALID
    then when i put the unlock code which have been provided by vodafone, its says
    NOT ALLOWED
    according to vodafone i have to send to nokia
    to BLOCKED NOKIA
    bla blabla i got the addy somewhere
    they said it take 5 business days but vodafone supplied half the information
    they dont know if i have to send a prepaid satchel in it? or have to pay them or whats the contact number of that blocked nokia

  • Nokia 5800 Web Configuration

    Yesterday I bought a Nokia 5800 Xpress Music. Before I had a Nokia 6110 Navigator and I used it also for surfing on the Internet with Wap with as APN "Vodafone Live" (or else the Vodafone promotion wasn't valid).
    Well, I tried to configurate the new 5800 for surfing in Web but I really can't understand how to configurate it and how to set the APN!
    Can someone explain me how to do? Because in the guide there is no explanation... (that's absurd though!)
    Sorry for my poor English!
    Bye, Marco.

    i add information: this only happens with the browser connected via WLAN. until today, i couldn't install the opera mini browser from mini.opera.com page. today i connected via 3g and downloaded and installed opera mini without a problem. and about this: with opera browser seems to happen the same... the program asks me twice about the connection (i choose always "internet", with mi WLAN name) and the hangs in "connecting"...
    so, viewing the evidences, it seems to be some kind of problem with the WLAN....
    ah, one more thing to note: the phone was connected to the battery charger this last time i tried opera.
    my settings in the default nokia browser are: connection: internet
    and the settings in settings->conectivity are:
    settings->conectivity -> destination-> internet i have the acces point of my home (priority 1) and my provider(priority 2)
    settings->conectivity -> WLAN -> settings -> show avail : yes
    settings->conectivity -> WLAN -> settings -> search network : 5 min
    settings->conectivity -> WLAN -> settings -> test connec: never
    yes, the two browsers works fine with 3g internet (now i installed gmail, the application downloaded from his site)
    bad, i need a solution for this... the WLAN was one of the things i was most interested about this phone... :'(

  • How to report a bug in Nokia Belle so that next up...

    Hello,
    I was wondering, where and how would I report a bug that I have repeatedly seen on my 808 Pureview? It is said that Accenture handles the support for Symbian now, but how do I actually get to a place where they receive bug reports for Symbian?
    The bug is purely linked to the OS, it is when I type text messages sometimes one key would just get stuck,and the system would freeze, for like 15 seconds, and then the phone would have no other choice but to reboot. This happens from time to time. And when you wrote a very long message before this bug happens, that makes you pretty angry usually.
    I have a Nokia 808 Pureview running the last version of Nokia Belle FP2. Everything is technically "up to date"...so I just want to report this bug so that future updates do correct that, if possible!
    Thanks!

    Although there is little chance of any updates, support and bug fixes should continue for a while yet. This is a user to user forum, you can contact Nokia here http://www.nokia.com/gb-en/contact/ and if it is possible to initiate a bug fix for your phone this is the best route  to follow.
    Good luck
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • Nokia N91 SIP Configuration (problem)

    Hi all,
    As it ays in the subject, I own a nokia N91 handset and i'm having problems accessing SIP Settings.
    Basically when I click on SIP Settings, and view SIP providers. I cannot delete, edit, or add any settings at all! When I do select (for example), options - delete - delete confirmation (yes) The SIP profile doesn't delete.
    I have done a full factory reset on the phone (*#7370#), but still no luck

    19-Apr-2008 06:11 PM
    os2lover wrote:
    Hi,
    No the *#7370# doesn't affect your harddisk, only the phone memory.
    Best regards,
    Olivier Baum
    ohh thanks for this info... Im just curious, how do we format the hard drive? Thanks
    CeS
    "The best index to a person's character is how he treats people who can't do him any good, and how he treats people who can't fight back"

  • Custom field - Next/Last Appointment?

    I am looking for a solution that I have not seen referenced yet on these forums, but if this is repeating another thread, please point me in the right direction.
    I am looking for a way to update two Date fields on my Account form. I want to pull the most recent appointment regarding the account and the next appointment regarding the account and make those visible on the main form. 
    I want this to be an automatic process running in the background, but I haven't been able to do so with workflows to this point. 
    Has anyone had a similar need/solution?
    Dan Garland

    The purpose would be to have a way to track when the last time we met with an account, and if we have a followup meeting scheduled.
    Ideally this would be viewable at the organization level through an "advanced find" view by filtering for active Accounts and the Last/Next Appointment field with some kind of date range. 
    To address performance, is there a way to make a process like this run daily at a certain time (eg. 2am) then have the field update throughout the day ONLY if an appointment is created/completed/closed?
    once again, sorry for my lack of experience - i'm happy to read on my own and find out how to do this stuff, I just haven't found something quite like this particular application yet.
    Thanks in advance for any help!
    Dan Garland

  • Gprs configuration in nokia 6300

    m using nokia 6300.when i configure gprs setting manually  in personal configuration settings , it doesn't seem to work, and any third party web appliacation like opera mini cant access internet.however the native browser is running well.
    well ...i cheked other nokia phones .when u configure manually in personal configuration the access point does appear  in preffered access points automatically.and in case of my nokia 6300 manual configurations are not appearing in preffred access points...
    any help wd b highly appreciated

    Get your Configuration settings here
    Gadget
    Remember to mark all correctly answered questions as Solved. A forum is only as great as the sum of its parts, together we will prevail.

Maybe you are looking for

  • Plugins for Final Cut Pro X

    It looks like Final Cut Pro X does not support import or export of FCXML. My company wrote a plugin that appears under the import,export menu using a Final Cut Pro provate API we had to sign an NDA for. We now need to rewrite for Final Cut Pro X. Who

  • Need a tool for oracle,like we have in sqlserver profiler....

    Hi All, I need your help..I need a graphical tool for oracle for monitoring the queries which are hitting the database.Actulla our developers wants this tool.Please advice me in this ASAP We have a tool profiler in sqlserver,we need the tool which wo

  • Restoring  the Database Object!

    H, I have done some changes to existing procedure in TOAD. After some time, by mistake i have run the create script of old version. So All the changes have been lost. Is there any way to get the version which i have made changes. Thanks and Regards,

  • Airport Express and DVD's

    Hi, I wish to use my mac mini as a dvd player. If i use the airport express with its digital out, with my stereo that is surround sound (dolby) and digital in, will the surround sound go through airport express?

  • Keeping windows in front

    I want to be able to force windows like JOptionPanes, JFileChoosers, etc. to be place in front of the main window of my program. The problem is that the class that calls the 'show' methord of the new windows is not necessarily a Component object. So