Nokia c3-01 constant blinking and blank screen

2 months after i purchased my nokia c3-01,i noticed a constant blinking and a blank screen whenever i try to turn on my phone. Pls i need your help.
Solved!
Go to Solution.

Your phone has suffered from a failed firmware update. You need to take it to Nokia Care Centre. Check the link below for more details.
http://discussions.nokia.com/t5/Pool-of-Knowledge/Recovering-from-a-failed-firmware-update/td-p/3981...
Please mark the post as solution if it solves your problem.
Current Device - Nokia Lumia 1020/920

Similar Messages

Mac keeps logging out and blanking screen.

hi.
for some reason my mac just keeps logging out and blanking the screen at random points each day.
its VERY weird.
is there anything i can do about it?

There are a number of things that you could try - resetting SMC and PRAM, doing an Apple Hardware Test, reinstalling system software, etc.
But, if I were you, I'd take the unit into an Apple Store or an AASP. But be certain that you backup all of your data before you take it in.
When there's no rhyme nor reason to restarts and 'blank screens' on a daily basis, it's best just to let Apple handle it - they can run tests that aren't available to mere mortals. Could be anything...
Clinton

Charger blinks and the screen goes blank...help!

i purchased my macbook in may 2011...whenever im using it ,it just goes blank the light on the charger starts blinking and doesn't turn on again...i have taken it to the apple service center 3 times ,the guy does something and it works and then the same problem arises ....any solution to this problem? can i get a new macbook?

This is the MacPro forum (desktop computer). Best to ask your question in the right (MacBook) forum.

Update and blank screen problem

Hi I recently was having the problem were my 8800 would get a blank screen and the red led would blink and the phone would not turn on. I pulled the battery and let it sit and it started to work again. After experiencing this I decided to connect my phone and back it up and try to update the software. I downloaded the bbdm and started to update my phone. I get to the point in the update " loading system software" Gets about half way though and stops completely. I let the phone sit for 2 hours and hasnt made any progress. I then disconnected it and re connected it and tried the update again. Same problem doesnt make it past loading system software. Im really at a lost. any ideas??? thanks

I recently had the same issue when I upgraded to the 4.5 OS. Blackberry had me pull the battery and run the loader.exe program. It solved my problem. You have to keep the battery out until it asks to initialize.
I hope this helps

Windows Server 2008 Standard 32-bit gives Rundll32.exe error and blank screen on bootup

Last week our file server installed automatic updates and then requested a reboot. After rebooting it repeatedly gave a blue screen and rebooted. After 5 hours on the phone with Microsoft support we all gave up on it with no solution. Later
we were able to get the machine to boot using an old mirrored hard drive of the system drive. We can now access our data drive, however after login we get this error:
Rundll32.exe : Windows cannot access the specified device, path, or file.You may not have the appropriate permission to access the
item.
and the console just shows a blank screen. We are not able to do anything on the server. I can Ctrl-Alt-Del and bring up Task
Manager and I see that SQL Server is not running, so not all services are running normally.
Any help would be appreciated.
Thanks

Hi,
Based on my research, this issue occurs because the Rundll32.exe file is corrupted. You need to extract a new copy of Rundll32.exe in C:\Windows\System32.
To do this, you can either copy it from another same version of Windows or perform an In-Place Upgrade.
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows
Server 2008 & Windows Server 2008 R2
Best Regards
Dale
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Linksys SRW 2048 constant blinking and slow

Hi all. I tried to search but was not very successful with finding my answer but my problem is that all of the ports are constantly blinking fast. Is this normal?
I have the 2048 switch connected to a linksys wrvs440n router on port 48. Even the non connected ports are blinking dimmly. The internet appear slow as well. If I directly connect a PC to the router (bypass switch) the internet speed is greatly increased.
I am not sure what to look for in the webview. Does anyone have any ideas that I can try?
I even get this constant blinking if only one PC and the router is connected.
THANKS

THanks eepro. The ports that have a pc connected to are blinking constantly which I thought meant a collision was occuring. the other ports are only dimly lit and blinking but I think that just may be the other lights lighting them up from behind the front panel. The problem is even if there is only one pc connected there still seems to be constant blinking on that one port....
The switch just came new from linksys on a warrantee return.
Thanks

No back light and blank screen

anybody can help me on these issue-no back light and blank screen

1. Restart.
2. Press F2 key couple of times.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.

Having issues with 13" MacBook Pro. Running very slow and blank screen and sleep mode.

Bought my MBPro summer 2009. About a month / 6 weeks ago it began to run extremely slow at points. Now it is running poorly and getting very slow on a daily basis, to the point where it will not open applications, documents or even web pages for in excess of 5 minutes. I'm beginning to lose patience!
Also at the exact same time of these performance issues occuring, my MacBook Pro will not awaken from sleep mode when the lid is closed. Showing a blank dark screen and having to hard reset in order to boot up my system again and get it running.
What is the best solution in order to resolve these issues?
Your help is greatly appreciated.

Did you run Disk Utility>First Aid? If so what were the results? This is a copy of mine, note that the bottom line says: The partition map appears to be OK:
Ciao.

Switching a projector between mac monitor and blank screen...

is it possible to switch the image projected by a digital projector between the screen i am seeing on my ibook and a blank/no-input style screen? i always used to be able to do this with a pc laptop. just so i can hide the screen from the audience temporarily while i look for files etc without having to unplug the whole thing!.... many thanks all.

anna_ed, Welcome to the discussion area!
No, the iBook only mirrors the internal display to the external display.

IPhone 5c got stuck before it started update to iOS 8 and it goes back and forth between Apple logo screen and blank screen

how do I fix my phone now that it is stuck before the update and only goes back and forth between a blank blue screen and the Apple logo screen. Tried the reset and that didn't work. Please help

Hi Mitchblue,
If your phone is not able to get past the Apple logo, I suggest that you use the following article to help you restore the software in the phone:
If you can't update or restore your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT1808
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Beep and blank Screen after 10.4.11 Update

I have a PowerBook G4 that I use for odds and ends; it is not my primary computer. Last night I did some work on it, and when I quit, software update came on with a security update, 10.4.11, and some others (Safari as I recall). I told it to go ahead, and things seemed fine through the entire process until the reboot at the end. When the computer came back on, it gave three beeps and stayed with a black screen and the power light at the base of the screen blinking. This evening I put my 10.4 DVD in the drive and tried to boot from that. No luck (i.e., same behavior), and now the DVD is stuck in the drive.
Ideas? The computer was working fine prior to this.

Hi Charles, and welcome to the forum!
Your HD got hosed pretty bad, you may even have to pull it to get to boot off the Install Disk.
Have you done a PRAM reset...
http://docs.info.apple.com/article.html?artnum=2238
Try to restart your computer, hold down Command-s and type in the following:
/sbin/fsck -fy
Enter
(Space before -fy important)
If you can boot from the Install Disk eventually...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
May even need to do an Archive and Install if you have room on the HD...
http://docs.info.apple.com/article.html?artnum=107120

Lenovo H330 Beep Code: 1 long 3 short and blank screen

I have an issue with startup, every now and again my startup initiates what sounds like 2 long beeps followed by 3 short ones - 'beep-beep' + 'beep+beep+beep' - but from what I've seen, throughout online discussion, it is only 1 long beep followed by 3 short ones. After this tune is played my screen remains blank, and on another attempt of start up the PC runs fine. Any ideas?
Solved!
Go to Solution.

Since the computer's behavior changed after re-seating the memory I would double check the memory slots. Remove the memory and shine a flashlight into the slot to see that there is no debris in the slot and that the contacts look fairly shiny. Also look at your memory module contacts. You can lightly rub these contacts with a pencil eraser to insure they are clean. Just be sure there is no eraser residue left on them before re-inserting them into the computer and avoid touching the contacts with your fingers.
If the above doesn't offer any help then try booting the computer with just one memory module installed. I assume you have two in there. Then see how it boots. If it boots Ok then swap the module for the other one. If both of them boot Ok by themselves then move the memory module over to the other slot and try booting up the computer.
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

White Screen and Blank Screen

Hi guy
I recently bought a 9720 and as new as it is,it fell when doing a back flip(long story)... So as we speak all I'm getting is a black blank flickering screen and sometimes that black screens becomes a "white screen of death"...
And I've been doing my research and because the 9720 is still new,no one has experienced what I'm experiencing maybe... So guys if anyone has a solution to this pls help out,pls pls pls,
Thank you

Hi and Welcome to the Community!
I recommend that you attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
You may also need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
Also, please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
Lastly, do be aware that if the device was damaged, then no amount of OS or software level "fixes" will be of any use. Only in-hand evaluation by a qualified BB hardware technician could give you a proper evaluation and estimate if actual damage has happened.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Num/Cap lock blinking and computer screen not starting

ok. i have a HP pavilion entertainment pc dv7 notebook.
1)    For the last 3 weeks my screen would turn off randomly. maybe once every other day or so on. The computer would stay on and my ligths on the keyboard,( VOL bar, Multimedia buttons, Wifi button, Mute button, Caps lock and Num lock) .Only thing that would turn off is my Monitor. Sometimes when it turns off my speakers would make a status sound across the sound bar. But i can be on my computer for hours, or even leave my computer on for days with the screen open and it wont do anything.
2)   then for that last few days i notice when i turn on my computer everything would turn on EXCEPT THE MONITOR. then i hold down the power button and turn it back on and it starts up fine.
3) Then yesterday when i tried turning it on. Same thing monitor wouldnt turn on but my NUM/Caps lock would blink. So again i would turn the laptop off , turn it back on and now its up and running
I really rely on my computer so i was considering taking it to a local tech but i wanna know the issue so he doesnt give me some kinda Jive turkey story. I would just start rening a computer from Aarons rent but dont think there computers are any good for my gaming. Starcraft 2, league of legends ecct.

Hi,
Please try a hard reset and see if it works.
1. Power off your laptop
2. Remove the a/c adapter, battery and everything that is attached to your laptop.
3. Hold the 'POWER 'button down on your laptop for about 10 seconds.
4. Plug in the a/c power supply (without battery) and power on.
Please check the following link for more information:
     http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443366&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Ms-6585 with msi 4200 128 8x blue screen and blank screen with msi agp

here's the system,
sorry for the not usefull crap.
Operating System: Windows 2000 Professional (5.0, Build 2195) Service Pack 3
Language: French (Regional Setting: French)
System Manufacturer: MSI
System Model: MS-6585
BIOS: Version 1.00
Processor: Intel(R) Pentium(R) 4 CPU 2.53GHz
Memory: 512MB RAM
Page File: 212MB used, 1265MB available
Windows Dir: C:\WINNT
DirectX Version: DirectX 9.0 (4.09.0000.0900)
DX Setup Parameters: /PackageInstall
DxDiag Version: 5.03.0000.0900 32bit Unicode
DxDiag Notes
DirectX Files Tab: No problems found.
Display Tab 1: The file nv4_disp.dll is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs (WHQL). You may be able to get a WHQL logo'd driver from the hardware manufacturer.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: The registry information for the DirectPlay application 'Gangsters 2' is missing or damaged. You should reinstall that application.
DirectX Debug Levels
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
Display Devices
Card name: NVIDIA GeForce4 Ti 4200 with AGP8X
Manufacturer: NVIDIA
Chip type: GeForce4 Ti 4200 with AGP8X
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0281&SUBSYS_89431462&REV_A1
Display Memory: 128.0 MB
Current Mode: 1024 x 768 (32 bit) (75Hz)
Monitor: Écran Plug-and-Play
Monitor Max Res: 1600,1200
Driver Name: nv4_disp.dll
Driver Version: 6.14.0001.4345 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 3/20/2003 20:13:00, 3097098 bytes
WHQL Logo'd: No
WHQL Date Stamp: None
VDD: n/a
Mini VDD: nv4_mini.sys
Mini VDD Date: 3/20/2003 20:13:00, 1261418 bytes
Device Identifier: {D7B71E3E-41C1-11CF-2B67-42A900C2CB35}
Vendor ID: 0x10DE
Device ID: 0x0281
SubSys ID: 0x89431462
Revision ID: 0x00A1
Revision ID: 0x00A1
Video Accel: ModeMPEG2_A ModeMPEG2_B ModeMPEG2_C ModeMPEG2_D
Deinterlace Caps: {212DC722-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{212DC723-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_MedianFiltering
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{212DC722-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{212DC723-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_MedianFiltering
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{212DC722-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{212DC723-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_MedianFiltering
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
i cannot run agp 4x and 8x
if i try to tweek my vid card, i have blue screens
i cannot run any msi agp drivers (all i see is mouse cursor)
i'm running nvidia drivers
help me !!!

Quote from: Bas on 01-November-08, 19:55:21
Try again with Vista 32bit, 64bit is highly unstable and only a few have it running stable.
I've been running Vista x64 for the past nine months, and now with my K9A2 P--and have had no problems. I mean, none. Have not had any occasion to even consider reinstalling Vista x32. Vista x64 has been stable as a rock for me consistently since I installed it. Would not consider going back to XP under any circumstances.
There is a problem with Beard0's system that I would say boils down to device drivers or faulty hardware or some combination thereof. His experience is dramatically different from my own, and the problems he's having are not indicative of my experience with Vista, whether x86 or x64.

Nokia c3-01 constant blinking and blank screen

Similar Messages

Maybe you are looking for