Nokia C3-01 Data counter error
I've updated my C3-01 to v7.51 and it completely messed up with the data counter. Earlier it used to maintain the count even when the data usage was in GB. Now it resets itself after every 1GB. It defeats the purpose of data counter completely as in using 3G, my usage has now gone upto atleast 1 GB/day. And I've already done the usual resets & reinstallations at the user level. This problem was not present in the 7.16 but has come up in 7.51. Please look into this matter. Anyone else with problem is welcome to post his feedback.
Please mark the post as solution if it solves your problem.
Current Device - Nokia Lumia 1020/920
Just restart your phone.
Similar Messages
-
Nokia Lumia 900 Data Counter and People Tile
Is there a data counter on the Lumia 900 that I can't find? I've tried to call the 3282 data number, and it always tells me I'm at 0 even though I know i've been on the data network and not wifi.
Also, can someone explain to me how much data something like the people tile/email account setup uses? I've never understood apps like that coming from suuper old phones. Is it constantly checking your email/facebook? On some time interval? I'd really like to set up facebook and such with the people tile because it seems really nifty, but I don't want to go over my 2gb plan. I just don't terribly understand how it all works, and i'd be willing to try it out if I could see how much data i'm using..but that goes back to my first question...In the past when checking email/facebook I'd always just use the internet browser on my old Nokia e71x, and it wasn't giving me updates in real time like I know this guy is capable of. I'd like to use it, I just don't wanna eat up my data plan. Thanks for any wise words!
Solved!
Go to Solution.The email setting can remain always-on and email arrives instantly like a Blackberry if you set the synchronization settings to "as items arrive" for the email setup. There will also be a very small data usage checking for changes on various Windows Live services such as Calendar for changes so it can sync the data to the phone, or vice versa.
The People Hub tile uses existing picture thumbnails already stored on the phone from your contacts profile pictures and Twitter and the first profile picture it finds on your friends profile pictures on Facebook. Once the thumbnails are on the phone it doesnt use any more data.
It doesnt use any data to check for Facebook or Twitter until you go into the People Hub and swipe the screen into the "Whats New" section then it displays new Twitter and Facebook posts which have happened since you last checked it. Although if you have set Twitter and Facebook to email you when you receive a mention or interaction and you have your email set to receive messages instantly then you will have realtime alerts for those important things.
When you swipe to the "All" section of the People Hub and click on your picture it then gives you the option to post a message to Twitter / Facebook or Windows Live all at the same time, or selecting each checkbox for individual social networks if you only want to post a message to one or two not all. In this section you can also Check-In which places a Bing Maps location of the place you are using the GPS system. The Messaging system is persistent always-on and displays any contacts that are online on your Facebook chat and Windows Live Messenger if you have set it up, which when you receive a message is text only so uses very little data. -
Nokia N95 8GB data counter accuracy + T-Mobile (UK...
Hi.
I have the 10GB per month web 'n' walk max package.
I use the Nokia N95 8GB as a modem for my computer as I do not have a land line.
I reset the Nokia's data counter (uploaded and downloaded totals) on the 1st of each month.
Since T-Mobile changed the service about 3 months ago I receive text warnings when I reach 80% of the fair use policy (i.e. 8GB) and a text if I hit 100% (i.e. 10GB). If I hit 10GB I am told that I will still be able to surf but not download at peak times.
There seems to be a big difference between what T-Mobile claim I have used and what the phone's counter shows. This month, for example, I have received the 80% warning but my phone only shows a total (up & down) of 6.3GB, 1.7GB difference.... quite large I feel! Last month I received a text telling me i had hit 100% but my phone only counted 8GB total.
When I contacted tech support they checked the system and came up with different figures. The 1st system which I believe is the same one customers can access by logging into t-mobile.co.uk and downloading the unbilled data usage figures gave about 8.7GB total. This system until very recently used to crash if you attempted to download the internet usage and had used a few gigs of data... useful. The support person then checked a second system which gave a total of 9GB. However these two different systems are not the ones that generate the warnings and also the cut-off (or rather reduced surfing restriction) texts. So T-Mobile have at least 3 systems.
So I have some obvious issues. T-Mobile have now stated that the data counter in the phone will not be that accurate and will miss some data, implying it is to do with counting compressed data rather than uncompressed. I disagree. The phone counter will surely count all 1s and 0s coming through it regardless of what they are. At this point I made the analogy to my electricity supply... the meter is in my house, that is the device by which I and my provider go by. They do not have a meter at the power station end. They bill me for what comes into my house at my front door and not what is sent out. That is the most accurate method for the customer.
I wonder what Nokia would say if T-Mobile inform customers that their hardware can not add up?
I believe there is a trading standards issue looming here as I do not believe I am getting what I pay for. At best appears to be 90% use. Whilst it is true they do not cut me off entirely if I exceed the 10GB, they are not letting me even reach that point. I seems similar to the current issues surrounding quoted broadband maximum speeds and actual obtainable speeds.
So has anyone had similar problems and disagreements about the fair use policy? Does anyone have any information / ideas about the Nokia data counter accuracy?
I am on the verge of contacting trading standards and any other suitable body about this.
Many thanks.Thanks for replying.
If you are right, and as you say "I'm guessing", your butcher's analogy seems a good one. I know that the full data packet is not just the actual data but has the header attached (which I think can be up to 60 bytes?) but assumed that only the size of the contents would be counted not the wrapping. I wonder if this is what is actually going on. It would seem extremely unfair if it is especially as it can make a good gigaybte or more difference.
T-Mobile do not provide a reliable method to keep an eye on what is being used so what chance do I have? I still come back to my electricity supply analogy which I would say is similar to yours. My electricity supplier doesn't charge me for any electrical losses that occur between my front door and the power station (well not obviously anyway).
T-Mobile don't provide any software if you use the phone as a modem (unlike their web 'n' walk software if you use their USB dongle) and suggest you find software on the net to monitor your usage. However all the software I have tried seems to have limitations as to what type of data it can and can't monitor so is less than accurate and all have crashed at times and lost the running totals. The only accurate tool in my hands seems to be the phone itself.
Surely the customers shouldn't have to worry about transmission specifics, without those the net wouldn't work at all so how can they be charged for? Customers I guess would only want to pay for the actual data they are using. If I download a 1MB file I only want to pay for 1MB. Will the TV license people start charging extra for digital TV as the data is sent in packets?
Hmmph!
Thanks. -
Date Format Error During Cycle Count Activation
Hi MM Guru's,
Could you kindly help me with regards to my problem?
I was trying to activate the cycle count for the newly plant i created under new company code.
But im getting a date format error?
Anyone who could help me regarding this?
Thank you in advance.HI All,
I have check my own data date format.
But when i tried to activate the cycle count under
Menu path:
Materials Management > Inventory Management and Physical Inventory>Physical Inventory> Cycle Counting
I will not put any date on it, that's why its weird that i get an date format error.
Where this error came from?
Thanks.. -
Hello!
I've recently purchased Nokia C6-00 for my girlfriend, however, she was stunned by the bill she received for data transfer. Could you tell me where in the phone might she find gprs data counter?
thanks!in LOG, there is history of recent call, call duration, and data counter. Normally this data counter keeps record of last 30 days(or one month). You can crosscheck the data tranferred with same bill
-
I am getting ORA-01403: no data found error while calling a stored procedur
Hi, I have a stored procedure. When I execute it from Toad it is successfull.
But when I call that from my java function it gives me ORA-01403: no data found error -
My code is like this -
SELECT COUNT(*) INTO L_N_CNT FROM TLSI_SI_MAST WHERE UPPER(CUST_CD) =UPPER(R_V_CUST_CD) AND
UPPER(ACCT_CD)=UPPER(R_V_ACCT_CD) AND UPPER(CNSGE_CD)=UPPER(R_V_CNSGE_CD) AND
UPPER(FINALDEST_CD)=UPPER(R_V_FINALDEST_CD) AND UPPER(TPT_TYPE)=UPPER(R_V_TPT_TYPE);
IF L_N_CNT >0 THEN
DBMS_OUTPUT.PUT_LINE('ERROR -DUPlicate SI-1');
SP_SEL_ERR_MSG(5,R_V_ERROR_MSG);
RETURN;
ELSE
DBMS_OUTPUT.PUT_LINE('BEFORE-INSERT');
INSERT INTO TLSI_SI_MAST
( CUST_CD, ACCT_CD, CNSGE_CD, FINALDEST_CD, TPT_TYPE,
ACCT_NM, CUST_NM,CNSGE_NM, CNSGE_ADDR1, CNSGE_ADDR2,CNSGE_ADDR3,
CNSGE_ADDR4, CNSGE_ATTN, EFFECTIVE_DT, MAINT_DT,
POD_CD, DELVY_PL_CD, TRANSSHIP,PARTSHIPMT, FREIGHT,
PREPAID_BY, COLLECT_BY, BL_REMARK1, BL_REMARK2,
MCC_IND, NOMINATION, NOTIFY_P1_NM,NOTIFY_P1_ATTN , NOTIFY_P1_ADDR1,
NOTIFY_P1_ADDR2, NOTIFY_P1_ADDR3, NOTIFY_P1_ADDR4,NOTIFY_P2_NM,NOTIFY_P2_ATTN ,
NOTIFY_P2_ADDR1,NOTIFY_P2_ADDR2, NOTIFY_P2_ADDR3, NOTIFY_P2_ADDR4,
NOTIFY_P3_NM,NOTIFY_P3_ATTN , NOTIFY_P3_ADDR1,NOTIFY_P3_ADDR2, NOTIFY_P3_ADDR3,
NOTIFY_P3_ADDR4,CREATION_DT, ACCT_ATTN, SCC_IND, CREAT_BY, MAINT_BY
VALUES( R_V_CUST_CD,R_V_ACCT_CD,R_V_CNSGE_CD,R_V_FINALDEST_CD,R_V_TPT_TYPE,
R_V_ACCT_NM,R_V_CUST_NM ,R_V_CNSGE_NM, R_V_CNSGE_ADDR1,R_V_CNSGE_ADDR2, R_V_CNSGE_ADDR3,
R_V_CNSGE_ADDR4,R_V_CNSGE_ATTN, R_V_EFFECTIVE_DT ,SYSDATE, R_V_POD_CD,R_V_DELVY_PL_CD,R_V_TRANSSHIP ,R_V_PARTSHIPMT , R_V_FREIGHT,
R_V_PREPAID_BY ,R_V_COLLECT_BY ,R_V_BL_REMARK1 ,R_V_BL_REMARK2,R_V_MCC_IND,
R_V_NOMINATION,R_V_NOTIFY_P1_NM, R_V_NOTIFY_P1_ATTN, R_V_NOTIFY_P1_ADD1, R_V_NOTIFY_P1_ADD2,
R_V_NOTIFY_P1_ADD3, R_V_NOTIFY_P1_ADD4, R_V_NOTIFY_P2_NM, R_V_NOTIFY_P2_ATTN, R_V_NOTIFY_P2_ADD1,
R_V_NOTIFY_P2_ADD2, R_V_NOTIFY_P2_ADD3, R_V_NOTIFY_P2_ADD4, R_V_NOTIFY_P3_NM, R_V_NOTIFY_P3_ATTN,
R_V_NOTIFY_P3_ADD1, R_V_NOTIFY_P3_ADD2, R_V_NOTIFY_P3_ADD3, R_V_NOTIFY_P3_ADD4,
SYSDATE,R_V_ACCT_ATTN,R_V_SCC_IND,R_V_USER_ID,R_V_USER_ID
DBMS_OUTPUT.PUT_LINE(' SI - REC -INSERTED');
END IF;Hi,
I think there is a part of the stored procedure you did not displayed in your post. I think your issue is probably due to a parsed value from java. For example when calling a procedure from java and the data type from java is different than expected by the procedure the ORA-01403 could be encountered. Can you please show the exact construction of the call of the procedure from within java and also how the procedure possible is provided with an input parameter.
Regards, Gerwin -
Hi all ,
Following code throwing no data found error.
It is working properly for IF x <> 0 condition but when count(*) is 0 then it's thrrowing error.
earlier same code working properly as our client is using this application.
code on when_button_pressed trigger:
DECLARE
user1 VARCHAR2(20);
x NUMBER(4);
BEGIN
FOR c1 IN( SELECT COUNT(*) x
FROM vinay.file_proc
WHERE sector = :sector
and block = :block1
and plot_no= :plotno
and plot_size = :plotsize)
LOOP
x := c1.x;
END LOOP;
IF x <> 0 THEN
MESSAGE('Record Exists');
MESSAGE(' ');
RAISE FORM_TRIGGER_FAILURE;
END IF;
MESSAGE(' after if');
MESSAGE(' after if');
win_api_utility.copy_file(ltrim(rtrim(:ADRIVE1)),ltrim(rtrim(:DESTINATION)),TRUE,TRUE);
MESSAGE(' copy file');
MESSAGE(' ');
SELECT user INTO user1 FROM DUAL;
INSERT INTO vinay.file_proc values(:sector,:block1,:plotno,:plotsize,user1,sysdate);
COMMIT;
MESSAGE(' ');
CLEAR_BLOCK(NO_VALIDATE);
END;
:block2.path1:=:global.drive1;
GO_ITEM('BLOCK2.ADRIVE');Hi,
I think there is a problem with WIN_API_UTILITY.copy_file can anybody tell me if there is any restriction with this package. -
Page process throwing No data found error when deleting tabular form item
Hi guys,
I am trying to run a page process just before the Tabular form's MRU process and it's throwing a no data found error. Here is my code:
BEGIN
for i in 1..apex_application.g_f02.count LOOP
IF apex_application.g_f01(i) is not null THEN
UPDATE STOCK
SET PRODUCT_QUANTITY = PRODUCT_QUANTITY+apex_application.g_f08(i)
WHERE site_id = :P21_SITE_ID and product_id = apex_application.g_f02(i);
COMMIT;
END IF;
END LOOP;
END;Here f01 is the checkbox column and the if-statement is causing the problem because if I get rid of the update statement (leaving just the commit) then it still throws the error.
When I click on a checkbox and hit delete button which fires off both this process and then MRU I get the no data found error.
Would be grateful if someone could shed some light on this. Many thanks.
Edited by: taepodong on Jul 1, 2012 7:54 AMHi,
>
I am trying to run a page process just before the Tabular form's MRU process and it's throwing a no data found error. Here is my code:
BEGIN
for i in 1..apex_application.g_f02.count LOOP
IF apex_application.g_f01(i) is not null THEN
UPDATE STOCK
SET PRODUCT_QUANTITY = PRODUCT_QUANTITY+apex_application.g_f08(i)
WHERE site_id = :P21_SITE_ID and product_id = apex_application.g_f02(i);
COMMIT;
END IF;
END LOOP;
END;Here f01 is the checkbox column and the if-statement is causing the problem because if I get rid of the update statement (leaving just the commit) then it still throws the error.
When I click on a checkbox and hit delete button which fires off both this process and then MRU I get the no data found error.
>
You are iterating on the f02 and checking for f01 not null. That is wrong usage of the the checkbox item. Please see these links . especially the OnSubmit Process examples.
http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21676/apex_item.htm#CHDDCHAF
http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21676/apex_app.htm#AEAPI215
Regards,
PS : This is what you need to understand
>
<b>Note that check boxes displayed using APEX_ITEM.CHECKBOX will only contain values in the APEX_APPLICATION arrays for those rows which are checked. Unlike other items (TEXT, TEXTAREA, and DATE_POPUP) which can contain an entry in the corresponding APEX_APPLICATION array for every row submitted, a check box will only have an entry in the APEX_APPLICATION array if it is selected.</b>
>
Edited by: Prabodh on Jul 2, 2012 9:44 AM -
Should not raise no data found error
Hi Experts,
I am using select into statement in procedure and put some condition in select statement.
I want if condition failed then it sould put null in to target variable . It should not raise no data found error
e.g
select abc into v_abc from table
where cond1=cond;
if this select statement no give any record it should put null into v_abc and not raise no data found error
pls suggest something
UGYou could do...
SQL> ed
Wrote file afiedt.buf
1 declare
2 v_abc varchar2(20);
3 begin
4 SELECT
5 CASE
6 WHEN (select COUNT(*) from emp where empno = 1234) > 0 THEN
7 (select ename from emp where empno = 1234)
8 ELSE
9 null
10 END
11 INTO v_abc
12 FROM dual;
13* end;
SQL> /
PL/SQL procedure successfully completed.But that's no better than doing a check first as a seperate SQL in the PL/SQL.
I would do this... (if I really didn't want the no_data_found exception)
SQL> ed
Wrote file afiedt.buf
1 declare
2 v_abc varchar2(20);
3 begin
4 SELECT max(ename)
5 INTO v_abc
6 FROM
7 (
8 SELECT ename from emp where empno = 1234
9 UNION
10 SELECT null from dual
11 );
12 dbms_output.put_line(NVL(v_abc,'!null!'));
13* end;
SQL> /
!null!
PL/SQL procedure successfully completed.
SQL> ed
Wrote file afiedt.buf
1 declare
2 v_abc varchar2(20);
3 begin
4 SELECT max(ename)
5 INTO v_abc
6 FROM
7 (
8 SELECT ename from emp where empno = 7782
9 UNION
10 SELECT null from dual
11 );
12 dbms_output.put_line(NVL(v_abc,'{null}'));
13* end;
SQL> /
CLARK
PL/SQL procedure successfully completed.
SQL> -
Recurring "Invalid volume directory count" error
Hi everyone!
I'm hoping that someone can shed some light on this issue, because I'm just about to lose my mind trying to figure it out!
I manage a small companies' network of approximately 35 Apple Macintosh computers. All the computers are newer 2009 or later MacBook Pros and 2009 or later iMac running Mac OS 10.5.8 or 10.6.6.
A small number of computers persistently report one or more "Invalid Volume Directory Count" errors whenever I perform a Verify Disk check in Disk Utility roughly once per month. The errors are always easily corrected by booting the computers from their system CDs and then performing a Repair Disk and/or executing an fsck command in single user mode. Unfortunately, the problem recurs the very next time I check the affected computers' disks.
One particular user whose computer had always exhibited this problem recently received a new 2010 MacBook Pro 15, and now THIS computer exhibits the problem as well! Even more baffling, and just to be certain I avoided copying any damaged Library component from the old computer's drive, I didn't use the Apple Migration Assistant to migrate this user's hard drive to the new computer; rather, I performed a clean installation of all the applications and then copied his data to the new user account. Once again, Disk Utility reported the same error the very next time I performed a Verify Disk scan on the new computer's drive.
All staff use the same applications, and most of the other computers do not exhibit this problem.
I'm completely stumped by this problem! HELP
Message was edited by: psicilianoHi Thomas!
Thanks for your advice!
I doubt that the drives are dying for the following reasons:
1. The computers are fairly new
2. I do check the SMART status every time I perform monthly diagnostics, and the affected units' drives always report back ok
As for backing them up, I will certainly attempt do so more frequently.
I have to believe that the problem must be caused by the way in which the affected users handle their computers; although when I ask them, they always assure me that they properly shut down and/or restart their computers.
As for the possibility that a program may be causing the issue, since everyone in this company uses the same software, I would expect this problem to affect considerably more systems than it presently does.
I will continue to troubleshoot this problem and (hopefully) discover its cause once and for all.
It's these sorts of problems that will one day do me in...career-wise, anyways.
Pietro -
Home Page Date Format ERROR ...
I installed language support on my Portal 3.0.9.8 with 3 different languages: us, i=italian, f
but when i use the "i" language there are many problems with format date ...
in the Portal Home Page i have a message like "date format not valid"
and i have problems in the creation of the content area's items with the publish date.
Any one have an idea ???HI All,
I have check my own data date format.
But when i tried to activate the cycle count under
Menu path:
Materials Management > Inventory Management and Physical Inventory>Physical Inventory> Cycle Counting
I will not put any date on it, that's why its weird that i get an date format error.
Where this error came from?
Thanks.. -
Hi,everyone,
I had installed R Enterprise in my Oracle 11.2.0.1 base on win7,using the R 2.13.2, ORE 1.1, I can using the part function: like
library(ORE)
options(STERM='iESS', str.dendrogram.last="'", editor='emacsclient.exe', show.error.locations=TRUE)
> ore.connect(user = "RQUSER",password = "RQUSERpsw",conn_string = "", all = TRUE)
> ore.is.connected()
[1] TRUE
> ore.ls()
[1] "IRIS_TABLE"
> demo(package = "ORE")
Demos in package 'ORE':
aggregate Aggregation
analysis Basic analysis & data processing operations
basic Basic connectivity to database
binning Binning logic
columnfns Column functions
cor Correlation matrix
crosstab Frequency cross tabulations
derived Handling of derived columns
distributions Distribution, density, and quantile functions
do_eval Embedded R processing
freqanalysis Frequency cross tabulations
graphics Demonstrates visual analysis
group_apply Embedded R processing by group
hypothesis Hyphothesis testing functions
matrix Matrix related operations
nulls Handling of NULL in SQL vs. NA in R
push_pull RDBMS <-> R data transfer
rank Attributed-based ranking of observations
reg Ordinary least squares linear regression
row_apply Embedded R processing by row chunks
sql_like Mapping of R to SQL commands
stepwise Stepwise OLS linear regression
summary Summary functionality
table_apply Embedded R processing of entire table
> demo("aggregate",package = "ORE")
demo(aggregate)
---- ~~~~~~~~~
Type <Return> to start : Return
> #
> # O R A C L E R E N T E R P R I S E S A M P L E L I B R A R Y
> #
> # Name: aggregate.R
> # Description: Demonstrates aggregations
> # See also summary.R
> #
> #
> #
>
> ## Set page width
> options(width = 80)
> # List all accessible tables and views in the Oracle database
> ore.ls()
[1] "IRIS_TABLE"
> # Create a new table called IRIS_TABLE in the Oracle database
> # using the built-in iris data.frame
>
> # First remove previously created IRIS_TABLE objects from the
> # global environment and the database
> if (exists("IRIS_TABLE", globalenv(), inherits = FALSE))
+ rm("IRIS_TABLE", envir = globalenv())
> ore.drop(table = "IRIS_TABLE")
> # Create the table
> ore.create(iris, table = "IRIS_TABLE")
> # Show the updated list of accessible table and views
> ore.ls()
[1] "IRIS_TABLE"
> # Display the class of IRIS_TABLE and where it can be found in
> # the search path
> class(IRIS_TABLE)
[1] "ore.frame"
attr(,"package")
[1] "OREbase"
> search()
[1] ".GlobalEnv" "ore:RQUSER" "ESSR"
[4] "package:ORE" "package:ORExml" "package:OREeda"
[7] "package:OREgraphics" "package:OREstats" "package:MASS"
[10] "package:OREbase" "package:ROracle" "package:DBI"
[13] "package:stats" "package:graphics" "package:grDevices"
[16] "package:utils" "package:datasets" "package:methods"
[19] "Autoloads" "package:base"
> find("IRIS_TABLE")
[1] "ore:RQUSER"
> # Select count(Petal.Length) group by species
> x = aggregate(IRIS_TABLE$Petal.Length,
+ by = list(species = IRIS_TABLE$Species),
+ FUN = length)
> class(x)
[1] "ore.frame"
attr(,"package")
[1] "OREbase"
> x
species x
1 setosa 50
2 versicolor 50
3 virginica 50
> # Repeat FUN = summary, mean, min, max, sd, median, IQR
> aggregate(IRIS_TABLE$Petal.Length, by = list(species = IRIS_TABLE$Species),
+ FUN = summary)
species Min. 1st Qu. Median Mean 3rd Qu. Max. NA's
1 setosa 1.0 1.4 1.50 1.462 1.575 1.9 0
2 versicolor 3.0 4.0 4.35 4.260 4.600 5.1 0
3 virginica 4.5 5.1 5.55 5.552 5.875 6.9 0
> aggregate(IRIS_TABLE$Petal.Length, by = list(species = IRIS_TABLE$Species),
+ FUN = mean)
species x
1 setosa 1.462
2 versicolor 4.260
3 virginica 5.552
> aggregate(IRIS_TABLE$Petal.Length, by = list(species = IRIS_TABLE$Species),
+ FUN = min)
species x
1 setosa 1.0
2 versicolor 3.0
3 virginica 4.5
> aggregate(IRIS_TABLE$Petal.Length, by = list(species = IRIS_TABLE$Species),
+ FUN = max)
species x
1 setosa 1.9
2 versicolor 5.1
3 virginica 6.9
> aggregate(IRIS_TABLE$Petal.Length, by = list(species = IRIS_TABLE$Species),
+ FUN = sd)
species x
1 setosa 0.1736640
2 versicolor 0.4699110
3 virginica 0.5518947
> aggregate(IRIS_TABLE$Petal.Length, by = list(species = IRIS_TABLE$Species),
+ FUN = median)
species x
1 setosa 1.50
2 versicolor 4.35
3 virginica 5.55
> aggregate(IRIS_TABLE$Petal.Length, by = list(species = IRIS_TABLE$Species),
+ FUN = IQR)
species x
1 setosa 0.175
2 versicolor 0.600
3 virginica 0.775
> # More than one grouping column
> x = aggregate(IRIS_TABLE$Petal.Length,
+ by = list(species = IRIS_TABLE$Species,
+ width = IRIS_TABLE$Petal.Width),
+ FUN = length)
> x
species width x
1 setosa 0.1 5
2 setosa 0.2 29
3 setosa 0.3 7
4 setosa 0.4 7
5 setosa 0.5 1
6 setosa 0.6 1
7 versicolor 1.0 7
8 versicolor 1.1 3
9 versicolor 1.2 5
10 versicolor 1.3 13
11 versicolor 1.4 7
12 virginica 1.4 1
13 versicolor 1.5 10
14 virginica 1.5 2
15 versicolor 1.6 3
16 virginica 1.6 1
17 versicolor 1.7 1
18 virginica 1.7 1
19 versicolor 1.8 1
20 virginica 1.8 11
21 virginica 1.9 5
22 virginica 2.0 6
23 virginica 2.1 6
24 virginica 2.2 3
25 virginica 2.3 8
26 virginica 2.4 3
27 virginica 2.5 3
> # Sort the result by ascending value of count
> ore.sort(data = x, by = "x")
species width x
1 virginica 1.4 1
2 virginica 1.7 1
3 versicolor 1.7 1
4 virginica 1.6 1
5 setosa 0.5 1
6 setosa 0.6 1
7 versicolor 1.8 1
8 virginica 1.5 2
9 versicolor 1.1 3
10 virginica 2.4 3
11 virginica 2.5 3
12 virginica 2.2 3
13 versicolor 1.6 3
14 setosa 0.1 5
15 virginica 1.9 5
16 versicolor 1.2 5
17 virginica 2.0 6
18 virginica 2.1 6
19 setosa 0.3 7
20 versicolor 1.4 7
21 setosa 0.4 7
22 versicolor 1.0 7
23 virginica 2.3 8
24 versicolor 1.5 10
25 virginica 1.8 11
26 versicolor 1.3 13
27 setosa 0.2 29
> # by descending value
> ore.sort(data = x, by = "x", reverse = TRUE)
species width x
1 setosa 0.2 29
2 versicolor 1.3 13
3 virginica 1.8 11
4 versicolor 1.5 10
5 virginica 2.3 8
6 setosa 0.4 7
7 setosa 0.3 7
8 versicolor 1.0 7
9 versicolor 1.4 7
10 virginica 2.1 6
11 virginica 2.0 6
12 virginica 1.9 5
13 versicolor 1.2 5
14 setosa 0.1 5
15 versicolor 1.6 3
16 versicolor 1.1 3
17 virginica 2.4 3
18 virginica 2.5 3
19 virginica 2.2 3
20 virginica 1.5 2
21 virginica 1.6 1
22 virginica 1.4 1
23 setosa 0.6 1
24 setosa 0.5 1
25 versicolor 1.8 1
26 virginica 1.7 1
27 versicolor 1.7 1
> # Preserve just 1 row for duplicate x's
> ore.sort(data = x, by = "x", unique.keys = TRUE)
species width x
1 setosa 0.5 1
2 virginica 1.5 2
3 versicolor 1.1 3
4 setosa 0.1 5
5 virginica 2.0 6
6 setosa 0.3 7
7 virginica 2.3 8
8 versicolor 1.5 10
9 virginica 1.8 11
10 versicolor 1.3 13
11 setosa 0.2 29
> ore.sort(data = x, by = "x", unique.keys = TRUE, unique.data = TRUE)
species width x
1 setosa 0.5 1
2 virginica 1.5 2
3 versicolor 1.1 3
4 setosa 0.1 5
5 virginica 2.0 6
6 setosa 0.3 7
7 virginica 2.3 8
8 versicolor 1.5 10
9 virginica 1.8 11
10 versicolor 1.3 13
11 setosa 0.2 29
but when I use the following The ore.doEval command get the errors,
> ore.doEval(function() { 123 })
Error in .oci.GetQuery(conn, statement, ...) :
ORA-29400: data cartridge error
ORA-24323: ?????
ORA-06512: at "RQSYS.RQEVALIMPL", line 23
ORA-06512: at line 4
and I try to run the demo("row_apply", package="ORE") get the same errors:
demo("row_apply",package = "ORE")
demo(row_apply)
---- ~~~~~~~~~
Type <Return> to start : Return
> #
> # O R A C L E R E N T E R P R I S E S A M P L E L I B R A R Y
> #
> # Name: row_apply.R
> # Description: Execute R code on each row
> #
> #
>
> ## Set page width
> options(width = 80)
> # List all accessible tables and views in the Oracle database
> ore.ls()
[1] "IRIS_TABLE"
> # Create a new table called IRIS_TABLE in the Oracle database
> # using the built-in iris data.frame
>
> # First remove previously created IRIS_TABLE objects from the
> # global environment and the database
> if (exists("IRIS_TABLE", globalenv(), inherits = FALSE))
+ rm("IRIS_TABLE", envir = globalenv())
> ore.drop(table = "IRIS_TABLE")
> # Create the table
> ore.create(iris, table = "IRIS_TABLE")
> # Show the updated list of accessible table and views
> ore.ls()
[1] "IRIS_TABLE"
> # Display the class of IRIS_TABLE and where it can be found in
> # the search path
> class(IRIS_TABLE)
[1] "ore.frame"
attr(,"package")
[1] "OREbase"
> search()
[1] ".GlobalEnv" "ore:RQUSER" "ESSR"
[4] "package:ORE" "package:ORExml" "package:OREeda"
[7] "package:OREgraphics" "package:OREstats" "package:MASS"
[10] "package:OREbase" "package:ROracle" "package:DBI"
[13] "package:stats" "package:graphics" "package:grDevices"
[16] "package:utils" "package:datasets" "package:methods"
[19] "Autoloads" "package:base"
> find("IRIS_TABLE")
[1] "ore:RQUSER"
> # The table should now appear in your R environment automatically
> # since you have access to the table now
> ore.ls()
[1] "IRIS_TABLE"
> # This is a database resident table with just metadata on the R side.
> # You will see this below
> class(IRIS_TABLE)
[1] "ore.frame"
attr(,"package")
[1] "OREbase"
> # Apply given R function to each row
> ore.rowApply(IRIS_TABLE,
+ function(dat) {
+ # Any R code goes here. Operates on one row of IRIS_TABLE at
+ # a time
+ cbind(dat, dat$Petal.Length)
+ })
Error in .oci.GetQuery(conn, statement, ...) :
ORA-29400: data cartridge error
ORA-24323: ?????
ORA-06512: at "RQSYS.RQROWEVALIMPL", line 26
ORA-06512: at line 4
>
whether my oracle's version 11.2.0.1 has no the RDBMS bug fix, and other problems? ThanksOracle R Enterprise 1.1. requires Oracle Database 11.2.0.3, 11.2.0.4. On Linux and Windows. Oracle R Enterprise can also work with an 11.2.0.1 or 11.2.0.2 database if it is properly patched.
Embedded R execution will not work without a patched database. Follow this procedure to patch the database:
1. Go to My Oracle Support:http://support.oracle.com
2. Log in and supply your Customer Support ID (CSI).
3. Choose the Patches & Updates tab.
4. In the Patch Search box, type 11678127
and click Search
5. Select the patch for your version of Oracle Database, 11.2.0.1.
6. Click Download to download the patch.
7. Install the patch using OPatch. Ensure that you are using the latest version of OPatch.
Sherry -
Hello,
I have text item called 'store' in my form. When the user keys in a store#, it should either provide a LOV of stores (if the store already exists in my tables). Else it should simply enable a bunch of fields/blocks in the form. However, when I key in a store that does not exist in my tables, it throws the '0RA-01403: No data found' error. The exception is supposed to catch it right? why does still it show that message in the form?
Below is my code:
DECLARE
v_prop_id number;
v_user varchar2(10);
v_user_id varchar2(10) := fnd_global.user_id;
v_status boolean;
v_chk number;
BEGIN
IF :PAY_HEAD.STORE is not null THEN
IF length(:PAY_HEAD.STORE) = 5 THEN
NULL;
ELSE
IF length(:PAY_HEAD.STORE) <= 4 THEN
IF :PAY_HEAD.STORE > 6999 THEN
:PAY_HEAD.STORE := '7' || lpad(:PAY_HEAD.STORE,4,'0');
ELSE
:PAY_HEAD.STORE := '1' || lpad(:PAY_HEAD.STORE,4,'0');
END IF;
--message(:PAY_HEAD.STORE);
SELECT COUNT(*)
INTO v_chk
FROM PN_PROPERTIES_ALL
WHERE property_name like :PAY_HEAD.STORE || '%';
IF v_chk > 1 THEN
v_status := SHOW_LOV('STORE_LIST');
END IF;
END IF;
END IF;
BEGIN
SELECT property_id
into v_prop_id
FROM PN_PROPERTIES_ALL
WHERE property_name = :PAY_HEAD.STORE;
EXCEPTION
WHEN NO_DATA_FOUND THEN
message('test5');
:GLOBAL.PAY_STATUS := 0;
:GLOBAL.PROPERTY_STATUS := 'NEW';
SET_ITEM_PROPERTY('PAY_HEAD.INSERT',LABEL,'Save');
SET_ITEM_PROPERTY('PAY_HEAD.APPROVE',ENABLED,PROPERTY_FALSE);
SET_ITEM_PROPERTY('PAY_HEAD.SUBMIT',ENABLED,PROPERTY_TRUE);
SET_ITEM_PROPERTY('PAY_HEAD.INSERT',ENABLED,PROPERTY_TRUE);
SET_BLOCK_PROPERTY('PAY_DETAIL_ACCTS',INSERT_ALLOWED,PROPERTY_TRUE);
SET_BLOCK_PROPERTY('PAY_DETAIL_RECON',INSERT_ALLOWED,PROPERTY_TRUE);
SET_BLOCK_PROPERTY('PAY_DETAIL_COMM',INSERT_ALLOWED,PROPERTY_TRUE);
SET_ITEM_PROPERTY('PAY_HEAD.ST_CITY',ENABLED,PROPERTY_TRUE);
SET_ITEM_PROPERTY('PAY_HEAD.ST_STATE',ENABLED,PROPERTY_TRUE);
SET_ITEM_PROPERTY('PAY_HEAD.LOCATION_TYPE',ENABLED,PROPERTY_TRUE);
END;
END IF;
END;Thanks,
Chiru
Edited by: Megastar_Chiru on May 3, 2010 2:57 PMIf you are able to run your Form from the Forms Builder, I suggest you turn Debug Messages on then run your form. The Debug Messages will display an Alert informing you of the trigger that is about to execute. This is a help debugging step, just don't forget to turn the Debug Message off again! :D
To turn Debug Messages on, go to Edit - > Preferences - > Runtime Tab -> Debug Messages checkbox.
If your Form is web deployed and you are unable to configure Form Builder so you can run your form locally, I suggest you work with your application server admin to temporarily enable Forms Runtime Diagnostics (FRD). Check out My Oracle Support (formerly Metalink) documents:
Forms Runtime Diagnostics (FRD) [ID 372323.1] (Forms 6i)
or
How to run Forms Runtime Diagnostics (FRD) in 10gR2 Forms. [ID 745280.1]
Craig... -
Data Cartridge error / IMG-00599
Hi, I have the following code:
create or replace function QBEFileSearch(url varchar2, filename varchar2) return imagelist is
compare_sig ORDSYS.ORDImageSignature;
seedimage ordsys.ordimage;
seedimagesig ordsys.ordimagesignature;
ctx RAW(4000) := null;
weights varchar2(64) := 'color="0,33" texture="0,33" shape="0,33" location="0,0"';
treshhold number;
imagenumber number;
ilist imagelist := imagelist(100);
counter integer := 1;
cursor getimages is
select inumber from tbl_images b
WHERE ORDSYS.IMGSimilar(b.signature, seedimagesig, weights, treshhold)=1;
BEGIN
seedimage := ordsys.ordimage.init('HTTP', url, filename);
seedimagesig := ordsys.ordimagesignature.init();
seedimagesig.generatesignature(seedimage);
treshhold := 50;
open getimages;
loop
fetch getimages into imagenumber;
exit when getimages%NOTFOUND;
ilist.extend;
ilist(counter):= imagenumber;
counter := counter +1;
end loop;
return (ilist);
end QBEFileSearch;
But I get the error message (Translated from Norwegian):
ERROR at line 1:
ORA-29400: Data Cartidge Error
IMG-00599: Internal Error
ORA-06512: at "ORDSYS.ORDIMGSIG_PKG", line 0
ORA-06512: at "ORDSYS.ORDIMAGESIGNATURE", line 90
ORA-06512: at "I0065.QBEFILESEARCH", line 22
ORA-06512: at line 5
when I try to execute it with the following code:
declare
results imagelist := imagelist();
begin
results := QBEFileSearch('laserlasse.no/bilder/', 'vcss.gif');
end;
Any Ideas?See my reply to your previous post....
-
Counting errors occured in personnel number (0HR_PT_2)
When loading data in BW with extractor 0HR_PT_2 we find the following message in the applicationlog:
'counting errors occured in personnel number....'
This problem causes the upload in BW to 'hang'in yellow status and the administrator must manually start the next staging (-> ODS en --> cube)
What also strikes as a bit strange is that the personnel-number in question doesn't belong to the selected CO-area in the infopackage
Anyone a clue?
Lex MeijerinkHi,
I've found this note that might be helpfull for us.
Note 800049:
Summary
Symptom
You are using time management datasources 0HR_PT_1/2/3 for extracting data from R/3. During extraction the message 023 from the message class HRTIM00DW may occur in the protocol. This is an application warning message explaining that the error happened in the application processing part of extraction. This problem should be corrected through changing the application customizing appropriately.
If you want to change the category of this message from "warning" to "information", please implement the correction instruction from this note. This correction is a modification and the change will not be delivered with the next service package and is not in the standard. Therefore, please implement the correction instruction manually. If in the future you want the message category to be changed back to "warning" then please take the change back.
Other terms
0HR_PT_1, HRTIM00DW 023, 023, 0HR_PT_2, 0HR_PT_3
Reason and Prerequisites
Modification
Solution
Please implement the correction instruction manually. If in the future you want the message category to be changed back to "warning" then please take the change back.
David
Maybe you are looking for
-
Can't hear audio when manually moving playhead
This is a very basic question, but I can't seem to find an answer through either the discussion forums or through HELP. I'd like to be able to hear an audio track in the editor by manually moving the playhead (not by selecting the PLAY button) back a
-
Not able to send or receive calls since upgrading my iPhone 4. Every time i make a call it fails. I have also noticed that my the battery life is very short as well. What is Apple and other carriers doing about this? When will this be fixed?
-
How do i get all the music that i purchased back on my ipod touch 3rd generation?
how do i get all the music that i purchased back on my ipod touch 3rd generation?
-
FollowUp: "Anniversary yearly repeats: Can the number be added automatically"
Hello all! I would like to reopen this topic: Can ordinal numbers be added to Calendar Events? I am running Calendar Version 8.0 and writing this in 2015. The original question was asked in 2008. The thread has been deleted and I have yet to find som
-
Dear all, Does Bex analyzer 7.x or 3.x support more than 255 columns in BI7.0 using excel 2007? Jeff