Nokia C3 - To interrupt the Internet connection?

Please how to interrupt the Internet connection? After the off-switch on the phone always online.
Thank you very much.

have you email set up on your phone ?
Menu > Settings > Connectivity >
Packet data > Packet data connection
When needed
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

TS1702 Some of my apps were updating when there was an interruption in internet connection. Now they don't want to finish the update process. Any ideas?

Some of my apps were updating when there was an interruption in the Internet connection. Now they won't complete the update process. Any ideas?

See:
Downloading apps stuck on waiting...: Apple Support Communities

Can I tether the internet connection from a smartphone to my iPod?

Hello everyone,
I own iPod Touch 4 with iOS 4.3.3 (8J2). I want my iPod be able to connect to the internet when WiFi broadcasting is not available around while I am on the go.
So my question is: Can I tether the internet connection from a smartphone to my iPod? With which smartphone or mobile OS other than iPhone/iOS?
I don't want to JB my iPod Touch.
I heard that smartphones with Android can tether the internet connection to iPod Touch, bu I am not sure, I searched the internet but couldn't find anything as I wanted.
Thanks, regards.
Erhan T.

I've got a (now considered ancient) Nokia N95 8 GB mobile, with the app JoikuSpot Light on it - has been working really well though I wouldn't suggest buying Nokia if you were going to buy a new mobile...if you happen to get your hands on an old-ish Nokia or Ericsson (Symbian platform) Joiku will do a good job of creating a wifi hotspot. Some more info under this thread:
https://discussions.apple.com/message/17315266#17315266
Good luck 8-)

How to used the internet connection adsl on my com...

how to used the internet connection adsl on my computer by nokia n73 me
i whant used the adsl connection in nokia n73 me by Bluetooth or cable
and thank you

Hi Theo,
There are several ways to implement this using simple timing features of LabVIEW. Two fairly simple methods are comparing system time stamps or using the Wait VI provided in the Timing palette. The time stamp comparison requires a little bit more programming, but can be included in your main program loop. To use the Wait function, you will probably need to construct a new loop parallel to your main loop. I have attached screenshots of these two implementations. Please let me know if you have any more questions.
Donovan
Attachments:
WaitDelay[1].Png ‏5 KB
TimeStampFalse.Png ‏11 KB
TimeStampTrue.Png ‏11 KB

My iMac drops the internet connection but mantains the wi-fi network.

I have a late 2011, 2.7GHz Intel Core i5, 27" iMac with 4GB Ram. When I power up the computer everything goes great, but after 3 or 4 hours (top) the internet connection stops working; and by this I DO NOT MEAN that the network utility turns off, or that it doesn't detect any netwoks. On the contrary, the computer stays connected to the wi-fi network and detects everything, but it simply has no internet connection; it even stops communicating with my iphone through itunes (with the wi-fi sync option), and crashes LAN games when i try to play at home. When this occured for the first times I just turned off and back on the network utility, but the problem continued and I had to keep turning off and on the network (it wouldn't stay connected for more than 5 minutes). I checked with my laptop (the last alluminum macbook ever available, as well as with my mom's black macbook) when the internet stopped working in the iMac (just to check that there were no issues regarding my ISP) and the internet connection just worked great in it, and it didn't drop at all! It also worked perfectly with my dad's windows XP dinosaur laptop.
At the beggining I thought my wi-fi router had gone bad, so I changed it for a brand new wireless-n ready router (it turned out that i wasted 180 dollars, because this wasn't the issue, and I had already trashed my old router). At first, I used the wireless-n feature, but other gadgets stopped working with this type (a play station 3 and a nintendo wii). I then configured it with a mixed mode, and everything has worked perfectly (including both macbooks, an ipad 2, an iphone 4s, 4 blackberries, a play station 3, a nintendo wii, 2 network printers, 1 network scanner, a 3TB network hard disk and 3 led tvs that come network ready, along with their respectives network ready surround soundbars).... EXCEPT FOR MY IMAC! So DEFINETELY MY ROUTER IS NOT THE PROBLEM.
I've been an avid apple user for almost 10 years now, and this is the first time I encounter this type of problem (it's my first iMac), so I'm pretty much out of logical options. I've already moved my router closer to the computer, I moved my wi-fi connection to the top of the list in the network utility.
I even had to re-write this whole message again because i clicked on "Post message" and it had no internet connection, so it displayed a no-internet alert in my browser.............
PLEASE! HELP!!!!
PS: all my apple gadgets are always up to date.

I FINALLY SOLVED THIS ISSUE!!!!
New routers have "mixed" modes for your network; this means that it will automatically choose the best option between wireless-B, wireless-G and wireless-N network modes. I used to experience this issue using the 2.4 GHz. mixed mode wireless network.
Thankfully, my router can create 2 networks: a 2.4 GHz. network and a 5 GHz. network.
When I randomly changed this value to "use only wireless-B and wireless-G" trying to fix an issue with a wi-fi expander, the iMac wi-fi issue dissapeared! I tried it with wireless-N only, but it didn't work.
So, finally, I have a 2.4 GHz network with only wireless-B and wireless-G modes which works PERFECT with the iMac, and a 5 GHz. network with a mixed* wireless mode for everything else mode.
*PD: by "mixed" mode it means that the router will automatically choose between B, G and N network modes as it fits better.

Why do i keep getting the "internet connection timeout" error message?

i have been upgrading a few standard itunes albums to itunes plus versions through my 3g mobile broadband connection, while not exactly a fast process, it was working fine until i started to get a backlog of 3 or 4 albums which were waiting in a queue to be downloaded, now every time i do the "check for downloads" option i get the "internet connection timed out" error message...this has been going on for 2 days! am i right in suspecting the backlog of albums is too much for my 3g mobile broadband connection? this is really doing my head in, if any of you techies could help me, it'd be much appreciated...?

yes i have recently updated to itunes 8.2.1, but i am starting to think its apple's servers (i tried to download at my brothers house...different computer and connection...same connection timeout error), because it will still let me download an album, but not necessarily all of the tracks. when i questioned itunes customer services about the seemingly hit and miss state of affairs with downloading, they told me to wait 3 weeks before trying to download the tracks that were giving me the grief (2 tracks from an arctic monkeys album)...which kinda indicates they know there is a problem and are trying to fix it, why else would they say wait 3 wks??? they gave me 5 free music tracks too, which is handy.

Is there a way to see when the internet connection is active?

I would like to know when my iMac is communicating on the internet connection and have a way to observe that. It's not clear by looking at my DSL modem lights. Does anyone know of a program I can use that will show that clearly? It would be nice to get a freeware or shareware if one is out there...
Thanks

Your mac already has built in utilities for that.
1. Hold down the 'option' key while you click on the wifi icon in the menubar and you'll see the last item in the menulist is 'Open Wifi Diagnostics'.
Click on it. When the app opens, ignore the dialogue and 'Continue' button and instead on your keyboard hit 'Command-N'.
You'll now get a diagnostic panel with various tabs that will give you detailed info about wifi connections.
2. Open Spotlight and type 'Network Utility'. Hit 'return' to open the app. Examine the various tabs for detailed infomation about net stats.
3. Also don't forget that in System Preferences > Network will give you a lot of information. Click the padlock and enter an admin password, then play around with the 'Advanced' and the 'Assist Me...Diagnostics' buttons. The latter is particularly useful to see exactly where your connection is failing (computer, router, ISP).

Setting-up the Internet Connection

Hi All, my systems has the following Linksys products:
modem - ADSL2MUE
wireless router 1 - WRT54GS (1st floor)
wireless router 2 - WRT54G (2nd floor)
switch - SR2024 (for cable connections)
I was able to connect all the PC to the internet. My problem is I could not make all the PC be in same Gateway number in which I could not share the network printers and files to all PCs. Is there any way to solve this problem? Below are settings to each device:
ADSL2MUE - Bridge Mode only
WRT54G - IP Address (192.168.1.1), PPPoE
WRT54GS - IP Adress (192.168.2.1), DHCP
* ADSL2MUE Internet Port is connected to WRT54G Internet port
* WRT54G Ethernet Port 1 is connected to SR2024 Ethernet Port
* WRT54GS Internet Port is connected to SR2024 Ethernet Port
* Printer 1 is connected to SR2024 Ethernet port (2nd floor)
* Printer 2 is connected to WRT54GS Ethernet Port (1st floor)
* All PCs in the 1st floor is using 192.168.2.1 gateway number thru WRT54GS wireless connection.
* All PCs in the 2nd floor is using 192.168.1.1 gateway number thru WRT54G and SR2024.
I need your help on this.
Best rgds, joven

It does not matter how you set the internet connection type on the second router when nothing connects to the internet port. The internet connection type is used for the configure of the connection through the internet port. As nothing is connected in the internet port the setting is basically inoperable and makes no difference whatever you set there. You should not set a static IP address as that may affect the routing tables on the router even if the internet interface is down. Thus, just leave it on Automatic/DHCP and it should be fine.

I was lately downlaoding a 700mb file, but i lost the internet connection and i have the .part file and i cant click resume, is their any way that i can continue dowlaoding the file without the need redownloading from the begining?

I was lately downlaoding a 700mb file, but i lost the internet connection and only 635mb was downloaded and i have the .part file but the download menu says that download failed so i cant click resume, is their any way that i can continue dowlaoding the file without the need redownloading from the beginning?

I do not know if your file can be recovered. But I may be able help you to recreate it with ease. If you will settle for a composite where all image are re-sized for a particular tile size and virtually cropped to its aspect ratio. However all source image need be gathered into a folder to use my script process. Paste Image Roll Script and Picture Package Support Link http://www.mouseprints.net/old/dpr/PasteImageRoll.jsx

TC: The Internet connection is currently in use by another computer...

So, I have a TC connected to a Netopia ADSL modem from Earthlink. Ocassionally, when the computer has left the wireless network, I will come home to find the following page with the Earthlink logo at the top:
“The Internet connection is currently in use by another computer
( 172.16.1.10 ).
Enter your DSL Account logon password to switch the Internet
connection to this computer.”
If I enter the password and click "Obtain Connection", I am taken to another page that says that I can now access the Internet, blah blah blah... and another button that says "Release Connection".
First of all, it does not seem like that should be happnening, but no big deal as it takes 5 seconds out of my day to work around. The bigger problem is that only one computer can be connected to the Internet at a time. If a friend with another laptop comes over and tries to access the Internet at the same time as me, he will get the same Earthlink page popping up. If he enters the password, he will kick off the first computer and on and on and on...
I called Elink support and they, of course, told me it is a TC issue. I called Apple and they, of course, told me it is an ISP issue. I suspect that it has something to do with my TC settings (bridge mode, maybe?), but have no idea what I am doing there.
Anyone have any ideas for me? I have friends coming into town this weekend and we won't be able to share stupid YouTube clips as efficiently with only one computer!

There is nothing you can do.. if you want more than one device connected then you must double NAT. This is common practice with Satellite providers.. I am not sure why they cannot afford to buy a block of public IP.. maybe it is deliberate to prevent people using servers.
Just select ignore in the airport utility.. for the double NAT problem.. this is the equivalent to sticking your head in the ground and therefore your problems don't exist. (your opponents cannot see you if you have a bird brain!!) Of course when the opportunity comes up.. move. Go to fibre or 3g/4g with a reliable ISP who hands out public IP. Until then tighten your belt.. short commons are the order of the day.

How do I get the internet connection back onto ipad even though it connects to Wifi successfully and I have checked on my iPhone which does connect via the same wifi and to the internet?

How do I get the internet connection back onto ipad even though it connects to Wifi successfully and I have checked on my iPhone which does connect via the same wifi and to the internet?

Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make/model, the wifi security being used (WEP, WPA, WPA2), etc.

I've forgotten my pass-code to my Ipod touch 4g and when I try to restore and update it on my itunes library the internet connection cuts out. Is there another way to fix this problem? Cheers

I've forgotten my pass-code to my Ipod touch 4g and when I try to restore and update it on my itunes library the internet connection cuts out so this is not an option. Is there another way to fix this problem? Cheers

The only way is to connect the iPod to a computer with has an internet connection and iTunes and restore the iPod. Use as friiend's computer or make an appointment at ther Geniuds Bar of an Apple store.

My iPad keeps loosing the internet connection. All of my other devices work. Last time this happened, comcast charged $49 to fix it. They said that it's somethin that I downloaded. How can I get back my internet connection on my iPad ?

My iPad keeps loosing the internet connection. Last time this happened comcast charged $49 to fix it. They said that the problem was perhaps caused by something that I down loaded. All my other devices still connected to internet. Tried to reset my settings. Still won't work. Any advice ?

First, changing your DNS settings could not possibly have any effect on this problem.
When you see an exclamation point in the Wi-Fi menu, from the menu bar, select
 ▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts. You may get a warning that Wi-Fi is not available, that you're too far from the base station, or that you're using the wrong password.
Assuming that you've ruled out those possibilities, click the lock icon in the lower left corner of the preference pane and authenticate, if necessary. From the Location menu at the top of the window, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.

I got an internet connection on my phone. After getting the internet connection, I was unable to make a call or check the missed calls that I got. Please help me resolve this problem.

I got an internet connection on my phone. After getting the internet connection, I was unable to make a call or check the missed calls that I got. Please help me resolve this problem.

Safari doesn't work ! Version 6.0.2 - but the internet connection is operational using Skype - what to do?

Safari doesn't work ! Version 6.0.2 - but the internet connection is operational using Skype - what to do? runing 10.8.2
Thanks for your support in advance.

I don't know about Growl as I've never used it. But I'd remove anything that might involve your internet connection. To remove Growl: http://growl.info/documentation/growl-package-removal.php
In my earlier post I asked do you have any Anti Virus software installed?
Do you have access to another computer so you could download another browser, perhaps onto a USB stick and then install it on your Mac just to see if the problem is Safari specific:
Google Chrome: https://www.google.com/intl/en_uk/chrome/browser/
Firefox: http://www.mozilla.org/en-US/firefox/new/

Nokia C3 - To interrupt the Internet connection?

Similar Messages

Maybe you are looking for