Nokia c5-00 bricked during software update
I've brought my nokia c5-00 on 20th jan 2011.
Today I was updating my phone to it's latest version, but the software update failed in mid showing error "connection lost with the device". And from that point phone dosen't starts. When i press the power button i.e the red button used to cut calls, it only vibrates a bit with no light on screen and switches itself off.
I've tried everything to make it work like pressing the call, star and 3 button to hard reset it but it had no effect on it, my phone dosen't even starts for charging.
Then after a failed long effort to restore my phone I decided to take it to the nokia care.
I showed it to the nokia care representative and after examining the phone by pressing the power button she instantly asked me if it's a failed software update by pc. I said yes it's due to failed software update. Then she forwarded it to the technician to repair the phone.
Now comes the shock.....
The technician said that the software update is failed due to a [B]bend in PCB plate[/B] and he showed me the PCB. The bend in PCB is something like this
And here are the images of my phone
I want to know how can the PCB plate bend like this if there is not even a scratch on the phone. Nokia care technician had denied warranty due to the bend in the plate. Where lies my fault in this?
I live in meerut and visited two nokia care centers
1- Nokia care, baccha park
Remark- will charge 70% of the original price of the phone and will change the PCB plate.
2- Nokia care, abu lane
Remark- They said the phone can be fixed or cannot be fixed and will charge Rs 1500.
My phone is still under warranty.
What should I do now?
/t5/Pool-of-Knowledge/Recovering-from-a-failed-firmware-update/td-p/398147
heres a clickable link
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520
Similar Messages
-
My new IPAD froze during software update thru itunes on my winows PC. The normal reset instructions holding the home and power buttons do not work. Itunes no longer recognizes my IPAD. What can i do?
See here -
Recovery Mode
http://support.apple.com/kb/HT1808
iPad not showing up in iTunes on a PC
http://www.apple.com/support/ipad/assistant/itunes/
iPad not showing up on a Mac
http://support.apple.com/kb/TS1591 -
My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
HT202157 My Apple TV blocked during software update. What should I do?
My Apple TV blocked during software update. What should I do?
You can't do much else besides pull the plug. If it causes further problems you should be able to restore as below:
Get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
On the other hand you may be able to simply start the update again. If however the update continues to fail, you should try the restore routine above. -
Error message during software updates
I am constantly receiveing the following error message during software updates. This time it happened with an HP printer update, but it has happened with iTunes and Safari as well. Does anyone know what I need to do?
The system extension “/System/Library/Extensions/GeneIOUSBCFSubclass.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update
Thanks!Try using Help > Updates from one of your CS6 applications.
When you return home, you might try uninstalling CS6 and reinstalling it again. It sounds like some stuff may have become corrupted. -
Ipad stuck at apple during software update
my iPad is stuck at apple logo during software update … what to do i have important date stored in it
If the reset doesn't work, you will have to force iPad into Recovery Mode.
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
Bandwidth usage details in SCCM 2007 during software update deployment
Hi All,
How can we know or check that how much bandwidth has been used during software update activity in SCCM 2007use performance monitor / performance counter perhaps
http://social.technet.microsoft.com/Forums/en-US/473bf861-6d81-4a3b-b603-2dfdbfa80c62/is-there-a-perfmon-counter-for-network-utilization?forum=perfmon
---Pat -
my iphone 4s froze during software update. I have removed and reinstalled itunes, but still will not recognize it nor reset it. In the screen I can only see a pic of the usb cable indicating me to conect with itunes. have done it several times but still does not solve my issue. I cannot use the device at all. any suggestions?
Unable to Update or Restore
http://support.apple.com/kb/HT1808 -
LOST MY CONTACT DURING SOFTWARE UPDATE
I LOST MY CONTACTS DURING SOFTWARE UPDATE A WEEK AGO , TRIED TO RESTORE FROM MY LAST BACK UP HELD ON MAY 16, BUT FAILED , AM EVEN SURE I'V SELECTED ALL DATA BACKUP FOR ANY OF MY PREVIOUS BACKUP , TRIED TO RESTORE FROM ANY BUT FAILED , TRIED THE GMAIL CONTACTS ALSO FAILED , WONDERING WHERE MY CONTACTS I'VE SAVED FOR MORE THEN 10 YEARS ARE GONE ....AM TOTTALY DISSAPOINTED SINCE AM A BLACKBERRY USER SINCE 5 YEARS , ALWAYS SUPPORTED BLACKBERRY AGAINST IPHONE USERS , ALL MY FREINDS ARE NO MORE USING BLACKBERRY AND SWITCHED TO IPHONE OR SAMSUNG , AM HAVING AN EMPTY BBM LIST NOW , BUT STILL SUPPORTING AND EVEN BOUGHT THE Z10 FIRST WEEK OF RELEASE , I WOULD UNDERSTAND THAT A TECHNICAL PROBLEM HAPPENED DURING THE SOFTWARE UPDATE , BUT CANT UNDERSTAND THE USELESS BACK UP I'VE ALWAYS DOING ! AND THE WORSE IS THAT LAST SOFTWARE UPDATE TURNED THE Z10 TO A WORSE MOBILE.
Hum, it is worrying...
So... your contacts seem to be on:
Gmail,
your previous backups.
-Solutions:
if all your contacts are on Gmail: copy them manually on your device,
they are a priori all in your backups: wait that Link won't be in Beta anymore, and then restore.
P.S.:
You make backups and don't register your contacts on SIM, is it possible ? Personally, I rarely register contacts on SIM. If there is a malware, it can be charged from the SIM to the Phone, this is why. -
Nokia Pc suite / Ovi Suit / Software Updater.... N...
Hi I have tried all three Nokia Pc suite / Ovi Suit / Software Updater. to update the firmware of my nokia n95 8 gb. but none of them is updating my phone. Right now 20.0.16 is the firmware on my mobile but you can check it out that the latest firmware available for N95 8GB ,,,, 31.0.015 . i tried this on my other laptop as well but showing me the same problem. i cant understand that when i am using the newest versions of Nokia Pc suite / Ovi Suit / Software Updater than why they are not installing the new firmware on my phone and showing me the message that it has already got the latest firmware which is totally wrong. i have attached a pic for the helpers to help and guide me out of this situation. thanx
Attachments:
n95 8gb.JPG 57 KBHi, farby thanx for the reply, First of all my phone is already unlocked and one my friend is also facing this same problem. as i have mentioned that there is update available on the nokia website. its just he Updater software which is not updating although it is connected to internet. maybe you should look to the picture i have attached to this thread. In the pic it is saying that 20.0.16 is the firmware is present on my mobile But you can check it out that the latest firmware available for N95 8GB ,,,, 31.0.015. and just look at the difference in the firmware versions. Its not like that N95 8gb is a latest phone and would have to wait for the new firmware. There should had been many firmware updates available between 20.0.16 to 31.0.015 versions. i hope so that you will understand which i am trying to explain. thanx bye
-
When is Nokia N97 mini getting an software update?
Does anyone have an idea when is the Nokia N97 mini getiing a software update after 11.0.045?
nokia dont give dates for releasing firmware you will just have to keep checking
and remember updates depend on region/product code and network,ie network has to approve the update
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520 -
Freezing up during software update
I just installed loin on one of my hard drives on my early 2008 Mac Pro. During software update the OS either crashes or freezes up.
I was eventually able to correct the problem. It first started because the phone's battery got completely discharged - thought the USB cable would keep it powered but that wasn't the case.
Anyway, tried to reboot the phone by removing and reinstalling the battery and the phone would not turn on, so this is how I understood what happened. Disconnected it from the USB cable and got the following message:
Your BlackBerry® Device Software is updated and you can safely disconnect your device.
Warnings were encountered during the loading process:
Application data could not be restored to the device. The backup data file has been saved to "file name". You can use the Desktop Software Backup/Restore tool to restore this information.
Recharged the phone, did the restore and the phone is back to life !
Cheers,
Giorgio -
Throttle CPU utilization during software updates
Are there any settings to throttle CPU Utilization during software update installation on client computers? I am deploying updates to test systems currently and noticed that the CPU utilization was being pegged at 100% during the install. After
the updates installed, the system returned to normal.Also note that ultimately, it is the Windows Update Agent that is installing the update(s) so it's not really within ConfigMgr's scope of control and would happen no matter what method you chose to use to update these systems with Windows Updates which
leads me to believe these systems have perf issues to begin with. Are they VMs?
Jason | http://blog.configmgrftw.com -
Keep awake during software updates?
hello.
so I'm using ARD, and automator, ical, to schedule a software update on certain machines at certain times. so far I havnt had much luck, I think due to the fact that machines go to sleep during the update. I would prefer not to have to set my stations to stay awake all the time, but instead to stay awake during software updates/ permissions repairs, long enough to complete the task and send the confirmation back to ARD.
Thanks for any help someone may have/suggestions/etcUse ARD to send the Unix command *systemsetup -help*
This will return a bunch of different commands for you to look at that are related to power and energy saving settings. Choose one that changes the sleep settings. Make sure you send the command as the root user
You can always read the man files for the pmset command using your Terminal app. Also check out this page too:
http://www.hmug.org/man/1/pmset.php -
How can you restore photos lost during software update on iTunes?
How do you restore or even find photos lost during software update of iphone 4 on iTunes?
Why did you not back it up before performing the update? Did you perform the update on a computer other than the one you normally sync with?
As already stated, if you didn't back it up, the data is now gone.
Maybe you are looking for
-
Switch row into a column in the view
EMP TABLE empid pay_type_id pay_factor 101 A 10 111 A 15 112 B 3000 101 C 250 111 C 250 PAY_TYPES table pay_type_id pay_type_code description A var
-
Error while submitting the Invoice
Hello Everyone, We are using SRM 5.0 with Extended classic scenario. I am having a problem while submitting the Invoice. I keep getting errors saying I need to enter a quantity for a line item that has already been billed in full. When I enter a qua
-
Any help to rest it is appreciated
-
Batch action quit in same spot 2x in a row
I'm running a batch action to make jpge previews of 10,000 Tiff files. First time I ran it, it quit after 3000 images. I just deleted those and tried again, Woke up this morning and it quit right at the same place. How does one resume the batch wher
-
Problem with load balancing on ACE 4710
Hello. I'm setting ACE4710. I'm using DSR (Direct server return). The load balancing cannot be distributed now. I append the network configuration. Could someone please help out? THANKS!