Nokia C5-03 Low memory problems ( Other Files )
Please help. I have a nokia C5-03 the handset is showing phone memory is full. I have checked and uninstalled all unecessay applications. But problem is still there. when i check the phone memory it indicates that i have other files of 42mb installed and using phone memory. however i am unable to check what other files are installed or classfied as other files. Can you please assist me so i can know what these other files consist of or where they are located.
Hi Thetao,
I typed a more extensive reaction before, but it got lost when I pressed "post". Therefore I just respond to the main points that you mentioned (and some I found out myself).
Strange: I can't find the 40 MB Maximum User Storage on the Nokia website anymore (nor the 75 MB). But it sounds very familiar to me. It looks to me as if they removed this from the phone specs, also of other Smartphones by the way.
Yesterday, I deleted some small apps that I don't use (anymore) such as InternetRadio and I also removed Nokia email. Although the apps were below 2 MB together, this freed up over 7 MB of Phone memory (24 MB free now)! I think there were still some old emails stored in C: which I couldn't delete any other way. This helped me a great deal already but I tried your suggestions as well.
1. No map data or CITIES folder on C: 2. Switched messages memory to phone (and phone to offline mode) and I did indeed find a forgotten email account with 30 email messages. Not much but I had 24,7 MB free after that. Of course, I put messages memory back to the memorycard. 3. Used the free edition of Y-Browser to manually delete the cache folder. Not much data in that, but 25,1 MB free after that. Nice tool, with which you can reach folders that normally stay hidden! Used YBrowser to search all C: for files over 300 kB. Only 2 files: boot_space.txt in C:\ (500 kB, contains only the X repeatedly as far as I see, but is probably essential for the operating system) and C:\resource\python25\pyton25.zip (1 MB). It looks like an installation package, but I'm not sure if I can delete it. By the way: YBrowser hasn't made a shortcut in one of the menus. Only way that I found to start it was to look for it using the Phone's search function. Is there a way to make this shortcut myself?
4. Yes I did. No Images folder on C: anymore, nor other big files (see point 3)
5. I use Bluetooth for file transfer sometimes, mainly for installation files (such as YBrowser.sis, but I did this one via USB-cable). However, no big files are left on C: so I don't think I have this problem.
6. I tried to delete Nokia Chat yesterday as well (with the other apps), but it won't be uninstalled the normal way as it says "Uninstall cancelled" (not sure about the exact translation since my phone 'speaks' Dutch) Do you know if there's another way to get rid of this 3 MB app that I don't use at all?
I think I may have found an explanation and a solution for the memory problem while navigating. You mentioned the "memory in use" in the map settings. Above that option there's a slide bar for the % of memory that the navigation can use. Standard is 70%. I always thought this was about storage memory on (in my case) the memorycard. Another topic mentioned that this the working memory (so the RAM) that the navigation may use. Setting it to 70% means there's only 30% left for other apps that run in the background. The other topic states that this is nog enough so the slider should be set to for instance 30% for navigation leaving 70% free for "the phone". From behind my computer, navigation seems much more stable. I'll try this setting in my car soon and let you know how it works.
Thanks a lot for thinking along with me so far! There's already 25,1 MB of space, which is great since it was only 7 MB last Sunday. And navigation looks more stable. I'd appreciate if you have some more answers to my latest questions, but if not I think my phone will work a lot better already!
Regards, Paul
Similar Messages
-
Virtual machine installation error: low memory for swapping file
WinXp SP2, 1G memory and 1536MB virtual page files. But why when I install java virtual machine, error occored : low memory for swapping file. And then the program closed automaticly. what happened??
Maybe too much stuff in memory? Close everything else before starting the install.
-
Low memory problem in nokia c5-03
I wanted to install the Viber application for Nokia on my phone. But the memory is low and a message is displayed "Low memory on C". I have deleted all my messages and images are also not present. I have checked the phone memory the total size of the contents is 21.3 kb. I have a phone memory of 75.4 MB, but the free space is just 2.99MB. There are about 30 MB SIS applications and 42MB 0f Other files. Can i delete these files??
Solved!
Go to Solution.Memory Full: Delete or remove some data from C: Phone memory"
The phone notifies you if the phone memory or memory card memory is getting low. There can be different error messages shown this situation, e.g.:
"Memory Full: Delete or remove some data from C: Phone memory"
"Disk Full : Automatic retrieval of mailbox for exchange disabled"
To free phone memory, transfer some data to the memory card with the File mgr application (select Menu > Applications > File mgr.). Select or mark files to be moved, select Options > Organise > Move to folder and then the destination folder.
In order to free memory, you could also remove or move the following:
Messages from Inbox, Drafts and Sent folders in Messaging.
Retrieved e-mail messages from the phone memory.
Saved Web pages. Clear the web browser cache to free some memory (select Options > Clear privacy data > Cache).
Saved images, videos, or sound files.
Contact information.
Calendar notes.
Downloaded application packages.
If there are applications which are not needed any more, uninstall them (select Menu > Settings > Data mgr. > App.mgr. > Installed apps.).
Any other data that you no longer need
If possible, use the memory card instead of phone memory in the Camera application (select Options > Settings > Memory in use to define the memory where the images are stored). You can also use Nokia Suite to transfer images and video clips to your PC.
If you are deleting multiple items and any of the following notes are shown: Not enough memory to perform operation. Delete some data first or Memory low. Delete some data, try deleting items one by one (starting from the smallest item).
LAST OPTION Is hard reset TYPE in *#7370# code os 12345 if asked.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520 -
I have newly installed PE8 on a Quad core, 4GB Mem, 6 TB Hdrives, Win XP SP3.
Open new project import 5 jpg photos (less than mb each), select them and add as group slideshow. As soon as the work area starts to render each of the pictures I got the "low memory" warning and basically the program stops responding. I am appalled that only 5 photos brings it to its knees--somethng is wrong
I have tried almost everything, (virtual memory is managed by windows all 6gb of it), defragged disks and virtual disk page file (ms sysinternals), cache is set to its own hd with 750 GB of space. I submitted this problem to adobe tech support and got referred to tech articles which did not help. I have tried running with msconfig turning off everything but it still does not work. I have done more reinstalls than I can count. More puzzeling is the fact that I monitor the ms process explorer from sysinternals and it show lots of physical and virtual memory available when the low memory warning occurs. I have reset the prefs and just about everything else but nothing works.
Attached is screen shot of PE8 and the Sysmonitor at the time the error occurred.
I have installed this same file into win 7 machine64 bit and it appears to work so I know the program works on other OS and machine, but I really need to work on my main photo processing machine (ie the Win XP).
I have seen many other similar post for memory related problems, has anyone found a cure?Like you, I come from a 30 year career as an advertising still photographer. Back in my dark past, I got a degree in cinematoghraphy (video was basically live feed to air in a studio back then, or live capture to 2" video tape, for delayed broadcast.), but had so many still clients, that I really had no time to use my studies in film.
Fast forward some years, and digital image manipulation caught my attention. Most of my images were assembled in the darkroom via analog compositing, and when I saw my first Scitex computer, I knew that I was looking into the future. In a few years, Aldus introduced PhotoStyler for the PC, and PageMaker for layout. The future had hit my desktop. Shortly thereafter, Adobe introduced Photoshop for the Mac, and then for the PC. I shelved PhotoStyler for Photoshop 2.5 and never looked back. Though I still shot film, soon everything was digitized and on my computer, before delivery. Aldus sold PageMaker to Adobe, and the development team for PhotoStyler went on to form Ulead.
Everything I do now is digital, but still every image goes through my computer. I too work in .PSD format and keep that workflow all the way to my video production. I seldom use JPEG, unless a client hands it off to me, or I need to do a Save_As for a client's Web site. I just do not like the compression, even at low levels (high quality levels), and have always had a very powerful computer (for each generation), so large files were where I was most comfortable.
When I began producing video (DVD-Video), I explored the best was to maintain the ultimate quality, and tested extensively, how my NLE handled the large files. I became convinced that the results were better (to my trained eye), when all manipulations were done in Photoshop, rather than in the NLE. I could see the difference, and wanted the ultimate, for both me and for my clients. I also liked the ultimate quality control from PS, rather than leaveing the "decisions" to the whims and limitations of the NLE. When I moved to PrPro, I tested again, and found the results from PS to still be superior. Now, I do have to admit that I have not tested with each version upgrade of PrPro, or with PrE, and I am sure that they have improved, but still rely on PS for everything. The biggest plus for me, regarding PrPro was that it COULD handle my .PSD's, so no conversion, even to TIFF. I'm with you on the need to work with .PSD's, or .TIFF's, at the least. One reason that I rely on PrPro for sitll image work is that I can Import a Layered .PSD as a Sequence, keeping my Layers. I can then animate each Layer, as I want and do so quite often. This inability to Import my un-Flattened, Layered .PSD's into PrE is a big drawback. Until PrE adds Sequences, I do not expect this to change. Still, if one does not need to animate the Layers and retain them, PrE's ability to just work with .PSD's is a really big plus.
For me, to date, PrPro does everything that I want, but I can see the benefits of a program, like ProShow Producer, so I'm exploring it. I'll probably pick up a full-paid copy, just to test it's workflow and output vs PrPro. Right now, I'm waiting on the next big SlideShow Project to "buy" ProShow Producer for me.
I am still working with SD Projects, but will soon add HD and export to BD. I believe that this will get me closer to that quality "Holy Grail." Of course, this will also bring an upgrade for my workstation, my OS and a new video camera, plus a BD burner. It will be with this output in mind, that I will be testing ProShow Producer, plus PrPro CS4.1 (or whatever version it's up to by then).
Now, I'm looking less for any automation in the SlideShow production, mainly because I am a "control freak." I want complete power in the editing suite. The only use for automation is for batch processing my stills for use in an NLE, or SlideShow production program. I understand the allure of the automation to most editors, but that is just not my personal style. My workflow is much slower, but then I enjoy determining every aspect of every image.
Let me know what you think of the ProShow products, as I will greatly appreciate your observations, especially as you come from a background very similar to mine.
Good luck,
Hunt -
Low memory problem drawing a route with MKAnnotationView
Hi!
I'm drawing a route like it's done in http://spitzkoff.com/craig/?p=81 but i'm not loading de coordinates from a file, i get the coordinates from GPS with CLLocationManager.
The problem is that my app crash with low memory in the device. I guess it's the way i'm drawing the route.
In - (MKAnnotationView *)mapViewMKMapView *)_mapView viewForAnnotationid <MKAnnotation>)annotation i can use dequeueReusableAnnotationViewWithIdentifier: like i do for the PinAnnotation?
And if doesn't exist i can make initWithAnnotation:annotation reuseIdentifier: ?
Should this solve my problem?
Does AnnotationView's consume much memory?
Thanks!And sorry for my bad englishHi!
I'm drawing a route like it's done in http://spitzkoff.com/craig/?p=81 but i'm not loading de coordinates from a file, i get the coordinates from GPS with CLLocationManager.
The problem is that my app crash with low memory in the device. I guess it's the way i'm drawing the route.
In - (MKAnnotationView *)mapViewMKMapView *)_mapView viewForAnnotationid <MKAnnotation>)annotation i can use dequeueReusableAnnotationViewWithIdentifier: like i do for the PinAnnotation?
And if doesn't exist i can make initWithAnnotation:annotation reuseIdentifier: ?
Should this solve my problem?
Does AnnotationView's consume much memory?
Thanks!And sorry for my bad english -
Newbie : memory problem with file uploading
Hello
I'm exdending a web app based on jsf and , being new to it and java in general, i'm having a problem with file uploading.
The customer needs to upload large file (more than 30 MB). The application accomplish this using a fileupload component, to let the user select the file, and passing the array of bytes to a web service method.
I'm using netbeans 6, tomcat 5.5.
When i try to upload a file too large i got an outofmemory on the local tomcat. So i've rised jvm memory and going on with tests i've found that growing the size i got an http 500 error from the service (the developer of the service has found an out of memory too ).
I think the service is not modifiable, so i were asking if threre were a way to optimize the file uploading process (a component, a library, a pattern ...) or my only chioice is to rise available memory on both sides.
I've notice the wsdl declares as base64binary type the data parameter , while netbeans 6 generates a client proxy with a byte[] parameter. Is correct or is a netbeans problem?
searching with google i've found few thing i haven't fully understood due to my lack of experience:
the mtom , how can evaluate if it's suitable to help in my problem (i suppose it involves more the web service rather than the client)
something about the size of a soap body.
thank you in advance
StefanoWhich component exactly are you using? Declaring the stream as a raw byte[] is certainly not efficient. Write code yourself, don't let it autogenerate.
I can highly recommend you the Tomahawk t:inputFileUpload component. It is easy to integrate in Mojarra. You can find here an useful article: [http://balusc.blogspot.com/2008/02/uploading-files-with-jsf.html]. -
Nokia Asha 206 Phone memory problem.
I have a Nokia Asha 206. Recently I updated it. After the update now out shows phone memory full all the time though I don't have any file in phone memory accept those which I could not delete. Please tell me how to solve this problem cause even if anyone sends me text msg it does not come to my phone cause memory is full. Even I can't send any msg. Everytime I try to send or receive something it showed memory full.i have external memory having 700mb free space but only 37kb internal free space.
Hi, wasimul. Welcome to our community. We suggest deleting some of your files like photos, videos, and text messages that you no longer need. You can also save your contacts directly to the memory card to avoid such issue. Another option is to reset it to its original settings. Here's how: Restore factory settings. The link is still applicable regardless of your location. We look forward to your reply.
-
Memory Problem in File Handling
Hi friends,
I have created an application (linked with database) based on permutaion and combination problem which is really a very heavy application. Whle running the application, if i prefer Console as basic output source (System.out.println()), it works fine but if i use PrintWriter as a source and tranfers all my output to an excel file, created at runtime, ite will terminate with an exception: Out of Memory:. Please suggest me the solution to solve this issue. I have also tried -Xmx option but it also fails.
Regards,
Ankurok here is teh code for you dear:
try
st_gsm = cn.createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE,ResultSet.CONCUR_UPDATABLE);
rs_gsm=st_gsm.executeQuery("select min(to_number(gsm)) gsmmin,max(to_number(gsm)) gsmmax from deckle where source='B'");
rs_gsm.first();
gsmMin=Integer.parseInt(rs_gsm.getString("gsmmin"));
gsmMax=Integer.parseInt(rs_gsm.getString("gsmmax"));
gsm=gsmMin;
st_cnt = cn.createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE,ResultSet.CONCUR_UPDATABLE);
if(machine.equals("") || machine.equals(null))
JOptionPane.showMessageDialog(this,"Please enter the Machine first");
else
rs_cnt=st_cnt.executeQuery("select count(1) records from deckle where source='B'");
rs_cnt.next();
records=Integer.parseInt(rs_cnt.getString("records"));
if(records>0)
* START: Creating a file for the deckle sheet
try
dt=new Date();
String filename=dt.toString().replace(" ","_");
filename=filename.replace("GMT+05:30_","");
filename=filename.replace(":","");
u = DeckleBoard.class.getResource("/DeckleBoard.class");
String path = new File(u.toString()).getParent();
path=(path.replace("file:\\",""));
System.out.println(path);
f=new File(path+"\\"+filename+".xls");
fw=new FileWriter(f,true);
pw = new PrintWriter(fw);
catch(Exception e) { e.printStackTrace(); }
* END: Creating a file for the deckle sheet
while(gsm<=gsmMax)
rs_cnt=st_cnt.executeQuery("select count(1) records from deckle where source='B' and gsm between " + (gsm-5) + " and " + (gsm+5));
rs_cnt.next();
records=Integer.parseInt(rs_cnt.getString("records"));
if(records>0)
str_sheet="select party,sheet_reel,length,width,sum(quantity) quantity,gsm,deckle_id " +
"from deckle " +
"where gsm between " + (gsm-5) + " and " + (gsm+5) +
" and sheet_reel='SHEET'" +
" and source='B'" +
" group by party,length,width,sheet_reel,gsm,deckle_id";
str_reel="select party,sheet_reel,length,sum(quantity) quantity,gsm,deckle_id " +
"from deckle " +
"where gsm between " + (gsm-5) + " and " + (gsm+5) +
" and sheet_reel='REEL' " +
" and source='B'" +
" group by party,length,sheet_reel,gsm,deckle_id";
str_mix="select party,sheet_reel,length,nvl(width,0) width,sum(quantity) quantity,gsm,deckle_id " +
"from deckle " +
"where gsm between " + (gsm-5) + " and " + (gsm+5) +
" and source='B'" +
" group by party,length,width,sheet_reel,gsm,deckle_id";
//System.out.println(str_sheet);
showCombinations();
System.out.println("\n");
gsm=gsm+5;
System.out.println("Total Quantity = "+Math.round(tot_qty*10.0f)/10.0f);
JOptionPane.showMessageDialog(this,"Process Finished");
System.out.println("============================================================");
System.out.println("Pending Sizes");
System.out.println("============================================================");
fill_pending_sizes_S_S();
System.out.println("Pending3: "+dataGSMS.length);
int v;
for(v=0;v<dataGSMS.length;v++)
System.out.println("Hello : \t");
System.out.print(typeGSMS[v]+"\t");
System.out.print(dataGSMS[v]+" * ");
System.out.print(widthGSMS[v]+"\t");
System.out.print(wtGSMS[v]+"\t");
System.out.print(GSMS[v]+"\t");
System.out.println(partyGSMS[v]);
System.out.println("Pending4: "+dataGSMS.length);
JOptionPane.showMessageDialog(this,"Process Finished2");
pw.close();
else
JOptionPane.showMessageDialog(this,"Recordset is empty...");
catch(Exception e1)
}May this help you in solving. here, showCombinations() is the method which runs for the actual COMBINATIONS logic. -
TO NOKIA : I'm bored of that freaking "low memory"...
Guys,
I'm sure I'm not the first one who met the problem :
Installing apps (whether from "extras-devel/testing or classic way) must not be a problem!
when you provide a 32GB tablet, extensible thanks to a SDHC, you can not restrict the space.
You must be aware that we can no more receive SMS or IM messages due to this problem!
and the solution must not be to remove applications as I can read !
You must allow us to use at least 16GB, and ESPECIALLY SEPARATE THE SPACE DEDICATED TO SMS/IM and future MMS.
Thanks for solving this problem soon,
and FYI, Russians users found a way.... which you must transform in order to be an automatic way to free space.
Guys, I'm reaaaaaaalllly disapointed of the "low memory" showed by the N900 when I install apps!Seriously guys, the fact that we must delete some apps (even if they are coming from extras-dev or testing) to be able maemo keep running, is BAD.How can we justify a 32 gb internal memory + 16gb on sdhc when we're limited that point!???the Russians found a way... ok, but why not having a better program allowing more things than currently?Thanks, and regards
PS : N900 users, please talk about this problem as well!
<http://translate.googleusercontent.com/translate_c?hl=fr&ie=UTF-8&sl=ru&tl=en&u=http://maemoworld.ru/2009/12/19/%25D1%2580%25D0%25B5%25D1%2588%25D0%25B5%25D0%25BD%25D0%25B8%25D0%25B5-%25D0%25BF%25D1%2580%25D0%25BE%25D0%25B1%25D0%25BB%25D0%25B5%25D0%25BC%25D1%258B-%25E2%2580%259C%25D0%25BD%25D0%25B5%25D0%25B4%25D0%25BE%25D1%2581%25D1%2582%25D0%25B0%25D1%2582%25D0%25BE%25D1%2587%25D0%25BD%25D0%25BE-%25D0%25BF%25D0%25B0%25D0%25BC%25D1%258F/&rurl=translate.google.fr&usg=ALkJrhix881dCVtoflgo9IDhh280l8xGoA>
Solved!
Go to Solution.Ok here's some more accurate information..
The device has two flash units.. the OS flash is 256 Meg.. it has the core of the operating system held on it.
There is also the eMMC flash.. this is 32gig and is split 3 ways:
768Meg: Swap space for assistence when running lots of aps..
2Gig: OS expansion, used when installing additional packages
28Gig: Media volume.. where user files are kept..
When you save a document, image, video, whatever it is stored on the media volume.. When you connect using USB mass storage, you're accessing the Media volume..
Because the device is Linux, it can't keep applications on the Media volume.. The Media volume is FAT32, Linux programs are kept on UNIX file systems (in this case ubifs and ext3)
So.. Nokia have split the eMMC storage to allow applications to be installed onto a 2gig partition..
This means that package developers HAVE TO USE the 2gig partition.. this is described as "relocation to /opt" in packaging terms.. Many packages DON'T do this.. this means they try and cram themselves into the OS 256Meg partition.. when that fills, it all breaks..
If you've installed a package that doesn't install into /opt (and therefore onto the eMMC 2Gig volume) then you run the risk of upsetting your device.. The package maintainer needs to re-package the software correctly .. using /opt.. then the problem goes away..
2Gig of Linux/Maemo software is an AWFUL lot of Linux software..
If you're experiencing low memory problems, its almost certainly due to the poor quality of the package.. That will get fixed in time, but what Nokia have done really isn't that bad.. -
IdeaTabA1000L-F, android 4.1.2, kernal 3.4.0, serial HGC1W5PYMany months ago i came on this site looking for a solution about my low memory problems, d/l a updated software fix for this which lasted a whole day. Installed an external sd card and moved irrelevent data to it, and still had problems. Lastly, just yesterday, i did a factory reset, and basically started over. My tab is telling me there are no updates and im running the latest version. On the web, playing games etc, i keep getting low memory warning in upper corner, and the browser crashes. Even with all the cache empty. Please help me so i dont do like the little kid on the nationwide commercial and throw this down on the cement!!!!!
Exchanging an ipad for a software problem is not a solution. I am replying to everyone who complains about crashes. The ipad air along with OS7 was apparently rushed to market. It amazes me that the previous version of the ipad along with the operating system is more stable than the ipad air. How do you release something inferior to the previous model. I spent a lot of money on the ipad air because I purchased the model with 128mb of RAM. If I could go back in time I never would have done it based on the problems with this new OS.
-
SMS Deleted NOT LOW on Memory -- plus other problems. HELP!
Ive only had my Curve 8900 for about a year, and I know thats about a decade in techie years but still...I'm incredibly frustrated with the issues I've been having!
Most pressing of these issues is that my phone keeps deleting my SMS even though my memory is NOT low! I've read tons of posts about the same issue but its always resolved by freeing up some memory.
My current memory status:
File Free: 90317537
Thus I have 90.31 MB free...yes? Shouldnt that be enough?
Apparently not. I have nothing stored on my blackberry, everything is on the Media Card (4GB) and I only have a couple applications (MSN, Facebook, GTalk) and yet my SMS get deleted regularly unless they are saved on my SIM card and also notifications on facebook are often deleted (those dont matter too much to me but I believe it is resulting from the same thing that is deleting my SMS)
Further, my call logs ARENT being deleted. So I dont think its the same memory problem everyone else seems to have.
I will be most most most grateful to anyone who can help me out here or at least point me in the right direction.
Im seriously considering shelling out for an iphone even though ive only had my blackberry for a year because I do rely heavily on smartphones and losing SMS is really driving me crazy. Sometimes I cant even read a newly received SMS before its deleted! By the time i pick up my phone its gone...
Please help!
Ive had other problems as well, not to ramble on but in case they are related:
I will be chatting on bbm for example and it will just exit out of the conversation or the application entirely.
Oftentimes it slows down so much that the minute hand or whatever stays and everything freezes until i do a battery pull (which i hate doing but have to at least once a day) This often happens when Im using the browser...
Sometimes when I am getting a call the minute hand appears again and I cant answer
Oftentimes when this happens it says that I am receiving a call from an unknown number, but when they call back it turns out its a number i have saved...weird...
Sometimes I cannot dial or call (frustrating as hell when i need to make a call urgently!) I have to again do a battery pull to fix the issue.
Ive had other issues here and there but nothing really worth mentioning after this long rant so I'll just leave it at that!!
Thanks to whoever has had the patience to read all this and I really do hope I can get some help before I release my frustrations on this piece of junk and end up having to spend tons of money on another brick...zberry wrote:
how do i go about installing it?
I suggest you follow this procedure:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Make sure that if, when you are making the backup (step 1 in the procedure), you say NO to any prompt to update your device OS at that point...you need to get a clean manual backup first so that you have it available just in case anything goes wrong. You will not be using DTM to do the update -- rather, you will be using the AppLoader included with the device OS package (as per step 2 in the instructions).
Also, make sure you have a manual inventory of all of your non-AppWorld 3rd party apps, including the source you obtained them from as well as any activation keys. You will want to re-install those fresh on the new OS rather than attempt to migrate them as part of the update.
zberry wrote:
By the way, are we not supposed to be informed when there is a new update?
The carriers are in control of notifications...some do a better job at it than others.
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Not enough memory to open file NOKIA 6120
Hi !
I have nokia 6120. I have also sandisk micro sd card (mobile premiere) with 1GB storage. I transfered a flash movie of 20Mb and another one of 11Mb into the card memory. I tryed to play it with flash player that is installed on the phone. When i select to play it from the file manager , it gives me a error: not enough memory to open file. On the phone i have 11 Mb of memory ow, but the movie is located on the sd card. I dont know why it gives me this error. I think its mean that i even cant play any of the other videos from the card ... for example a divx or avi movie !???
Anybody have the same problem ? I hope that there is a fix for this otherwise i have a big card that I cant use for such storage.... that will be a big shame.
RegardsI deleted some game and gain 1MB of Ram. Yes its quite low...strange. I need to check some friend phone which have the same type. I think that more stuff installed on phone means less ram memory available, although only some of them are rally active in stand by or none of them...I asked another friend if he have the same problem. I dont know exactly what is the model of his phone, but i now he have a symbian 3rd phone s60...the first one of this s60 3rd generation. He have the same problem when talking about opening the swf videos. I think that the phone try to fill the whole movie into his ram and then play it....so it doesnt work. When opening the avi videos..using smart movie player for symbian...no problems at all. Also using the original real player works ok, but the real player that is integrated does not support avi formats. It support mp4 format and some other. The smart movie player support avi formats, divx, xvid, mp4... I chose smart movie player because it has more functionalities then nokia real player. try it.
More info: http://www.lonelycatgames.com/?app=smartmovieMessage Edited by m4dj on 25-Nov-200709:54 PM
Regards -
Nokia 3500C -problem in file transferd via bluetoo...
I m using Nokia 3500C since feb 2008 but i have problem in file receiving or transferd via bluetooth while I have 256 MB memory card + Phone memory (8.2 MB) and used is 221 MB in memory card..
Free space in memory card is 12.5 MB
Free space in Phone memory is 27.5 KB
So being full memory card problem i have suffered or other else prob.
Reply as soon as possible..
Thanks to all..you have to free up ur phone memory first. otherwise it will not transfer any file via bluetooth. you need to have enough free space in the ph. memory so that it can hold a temp file of exactly the size of the file being transferred
-
Are there any INI or other files I can modify to increase available memory?
I have a new CPU (Intel I7 - 950 with 8GB of memory) and I'm running Elements 9.0. I have a slide show that is just under 20 minutes long and I'm trying to create a WMV file with the highest resolution. The create output starts and gets to about 58% and stops. It never creates a file. I go the lessor resolution and it works. Are there any INI file parameters or other file attributes I can tweak to give the application more resources so I can produce a WMV slide show? I used to create 40-50 minute slide shows with an older version of the software without any problems, it just took a while to run. I cannot believe I don't have enough resources to get this created, but I don't know what I need to do.
I have the same problem with smaller slideshows. I have to restart my system, open Elements and run the slideshow build just to get a 9 minute show produced at the max resolution. It will NEVER work if I try to do ANYTHING else first. This is really getting annoying... Any suggestions - besides using a lower resolution or getting verion 10?
Thanks...Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was planned with you maintaining a master copy of your media on a computer which is itself independently backed up against loss. To use a device with a new computer you transfer the content from the old computer (or its backup) directly to the new computer, not the device to the new computer. Media syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchases which can be transferred to a computer.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store
For transferring other items from an i-device to a computer you will have to use third party commercial software. See this document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991 -
I want to ask something about firefox.
why firefox use very much memory?
can you develop to reduce memory comsume?
this problem is very distrub in my PC with low memory.
== This happened ==
Every time Firefox openedHow much memory is Firefox using right now?
# Press '''CTRL+SHIFT+ESC''' to load the Task Manager window
# Click the Processes tab at the top. (Click once near the top of the window if you don't see tab
# Find firefox.exe, and see how many kilobytes of memory it's using.
Showing around 80MB when Firefox first starts is normal. Right now, I have 75 tabs open and it's using 500MB - this varies a lot depending on what you have in the tabs.
Other than high memory usage, what other problems are you experiencing? (Examples include slowness, high CPU usage, and failure to load certain sites)
Many of these issues, including high memory usage, can be caused by misbehaving add-ons. To see if this is the case, try the steps at [[Troubleshooting extensions and themes]]. Outdated plugins are another cause of this issue - you can check for this at http://www.mozilla.com/plugincheck
Maybe you are looking for
-
Can not install powerdvd10 on B540 which was uninstall accidently
Can not install powerdvd10 on B540 which was uninstall accidently. When I try to install from downloaded exe. file there was error message "This software can only be installed on a lenovo system"
-
AJAX like screen movement in Webdynpro
Hi Experts, I saw a video demonstration on sdn "https://wiki.sdn.sap.com/wiki/display/EmTech/IslandsWDA_MHO" where with the new service pack we can move trays or other UI elements on the screen just by holding the mouse button on them like in AJA
-
How to do the paging while reading from the file !!!
I've able to display the contents of the file in my jsp as a tabular form. I want to apply the paging concept in my jsp page. As i did in my database project there i's sending the next value as a parameter and it works. But when i retrieving the valu
-
I run the Disabled Photographers Societys competitions, in this role i collect a lot of data, i have always used Windows but recently took the plunge and swapped to Mac, which i am very pleased with, i have moved all my documents over but cannot open
-
How to use XY chart of JFreeChart? Or any other choice?!
Like the title, THX!