Nokia C5-05 Video Playing Problem (Firmware Proble...

Nokia C5-05 Original Firmware V20.5.039 have many bugs like whenever we plays videos it hangs or not playing properly in its realplayer and when i press back button the mobile get restarted,i have even check the other C5-05 and it also shows the same problem,so its in the firmware.Other bugs like when we press options button in menu then the down left corner the select or any other button is not appearing like other v5 mobiles have!!!
And many other bugs too!!!
So please Nokia should release a new firmware with all the bugs solved because am not able to play any video on my new C5-05 mobile,i have benn always a Nokia Mobiles Fan,since 5 years  am using Nokia Symbian Mobiles!!!

Nokia C5-05 Original Firmware V22.5.007 have many bugs like whenever we plays videos it hangs or not playing properly means it is having glitches and finally an error comes showing that memory full close some application and try again in its realplayer,while the same video on the same mobile is playing good in uc player or smartmovie.i have even check the other C5-05 and it also shows the same problem,so its in the firmware.Other bugs like when we press options button in menu then the down left corner the select or any other button is not appearing like other v5 mobiles have!!!
It also have two calculator icons appearing in the menu!!!
And many other bugs too!!!
So please Nokia should release a new firmware with all the bugs solved because am not able to play any video on my new C5-05 mobile,i have benn always a Nokia Mobiles Fan,since 5 years am using Nokia Symbian Mobiles!!!

Similar Messages

  • Nokia asha 200 video playing problem

    My Nokia asha 200 not play some high bitrate videos as (320x240,video bitrate= 512kbps,frame rate= 15fps).but Nokia 108 can play 480x240 resolution video easily,please please help about it ,please a software update for us, can't play video please help me and us, i want need minimum resolution=320x240 , 25fps,700kbps.

    Although a Nokia 108 looks similar to your Nokia Series 40 device, the Nokia 108 has a complete different operating system and chipset, created by MediaTek. Anyway, are you sure it is the combination out of resolution, bitrate and framerate? Which error message do you get exactly? Could you please double-check …

  • Video playing problem

    I m experiencing serious video playing problem unable to play avi files of size 150mb above as i have downloaded titanic n was unable to play it!!!!! Pls look in the matter

    hi mate, what device are you using, and what have you encoded the bitrate and audio codec of the video?

  • Video Playing problem (Zen Vision M 60

    I just got my 60gb zen vision M for christmas and i started transfering files right away to test out its playback quality etc
    When i get to video particularly my anime video it plays the first 5 or so seconds and then freezes... no sound and no video.
    The video is a naruto video from dattebayo fansubs. I think it is divx encoded (will double check to make sure)
    What should i do to solve this issue?
    I have not tried any other video's as yet but will do so soon

    **bleep** it looks like it's slight differences in the encoding of the files that determin whether or not they play
    I used Bleach episode coded by Lunar and that worked fine.
    If it is down to minor differences in encoding that's causing this problem, surely it should be fixed as soon as possible, because of the massi've amount of different ways of encoding the player isn't really fit for avi playback if it's this temperamental :/
    *UPDATE*
    I've looked at the bleach file that works and the Naruto file that doesn't work in GSPOT.
    There are a few very minor differences that I don't really understand but the one that jumps out at me is the container:
    The naruto files that don't work have the container 'Multipart OpenDML AVI, "rec list" style DivX Style "packed bitstream" AVI (223 frames in first part, 639 frames follow)' and the bleach file that works is 'OpenDML (AVI v2.0) DivX Style "packed bitstream" AVI'
    I've bolded what I think the problem is, would those 223 frames (first part) be the 8/9 seconds before it freezes?
    Could this be the problem?
    *FURTHER UPDATE*
    The naruto file that has the line 'First part 223' lasts 9 seconds whereas another file that has the line '(205 frames in first part, 32998 frames follow)' lasts 8.
    I'm almost certain this is what the problem is.......any chance of a firmware fix for the avi playback not supporting multipart AVI files?
    Message Edited by antonusklesk on 2-25-20060:40 PM
    Message Edited by antonusklesk on 2-25-20060:4 PM
    Message Edited by antonusklesk on 2-25-20060:44 PM

  • Nokia 6270 MP4 Video - Big Problem

    Hello,
    I've bought a Nokia 6270 a few months ago, and i still cannot get MP4 video to play properly.
    I've figured out how to get MP4 videos to play, but no matter what bit rate i set it to, it lags behind the video.
    I've even tried 96 kbps and 15 frames a second.
    Has anyone gotten MP4 videos to play properly on the Nokia 6270? Without lag?
    Is it a firmware issue? I am running firmware 3.69 on Nokia 6270.
    Thanks.Message Edited by ddragonwarrior on 01-Sep-2006
    05:04 PM

    http://www.nokia.co.uk/nokia/0,1522,,00.html?orig=/softwareupdate
    try to update it there
    just select any phone on the list it will detect ur phone automaticly and update it if it can b updated
    hmm depends on wht software ur using really or camara settings and everything....
    but dont expect to much from it

  • Video playing problems

    I literally JUST got back from the apple store, after they reset my phone because it was freezing. I'm trying to play a video I took and its all choppy and lagging a lot. I've reset and shut my phone off and its still doing that. The video is a slow-mo one, but its also doing that to my normal videos. How do I fix this?

    the same thing is occuring on my PC with purchased videos. They are freezing in specific parts throughout the videos. The audio is fine. I am running a new windows vista pc with itunes 7.3.2.6. I have tried playing back the music videos on a macbook and they work fine.

  • Video Play problems

    Hi,
    I have a multistate frame sitting over a video, which is set to auto-play. When I preview in Content Viewer it runs perfectly, when I check it on the ipad the video won't run until tapped. How do I get this video to auto-play, I think multi-state frame over it may be interferring.
    any help would be appreciated.
    Thanks!

    Thanks to Harm, Hunt and Stan for your quick responses. I need to absorb each one.
    1).MJPG (Motion JPEG) codec is required to view this video clip correctly. This codec is available from Main Concept and Morgan,
        I will take Morgan for a "spin" as suggested.
    2) Trail version has everything MPEG disabled and will be enabled when I get the full version,
    3) Single most critcal factor is what codec the clip uses.  
    I must have missed on the Adobe website the statement that the Trial version does not support anything MPEG. Why would Adobe remove this from the  PPro Trail Version? I was under the assumption that trial is a full version for 30-days and converted to full version by just entering a valid license number.
    One other note, why would these same MJPG AVI clips play in PPro 2? I did not add any codecs to the full version. I have about 6 projects that I used these AVI clips in and all worked.  Could it be that I started iwth a full blown version and all the MPEGs were enabled including MJPG? .
    Again, thanks to each one of you. Fortunately, being a prior PPro owner, my cost to upgrade is resonable. I've invested too much learning time in this product to move to something else. I'll say this qestion is answered when I can confirm it works.   .

  • 'Source play' and 'audio-video sync' problems with PE8 on fast WIN7 64 bit computer

    I am transferring Hi8 videos, about 2 hours long, to my WIN7 64 bit computer with PE8.  [Dell Mobile Precision M4400 Computer Workstation (Intel Core 2 Duo T9900 500GB/4GB); NVIDIA Quadro FX 770M, 512MB] I seem to have several problems: 
    First, after importing the file (.avi), I get a message about ‘dropped frames.’ 
    Secondly, when I try to play the video in the source monitor, the audio plays but the video doesn’t; it only shows the first frame [this is after waiting until the video is ?recognized? ]   I can use the shift-arrow key and see that the video is there.
    Thirdly, I can play the .avi file in other players, e.g., avidemux or PE pro CS5 on another computer.  There, I see that the audio and video are not in sync; the audio can be up to 300 ms ahead of the video (as determined using avidemux). 
    Questions:
    1.  Why doesn’t the source monitor play the video? Is this a problem with PE8 (latest update as of 3 March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
    2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

    "I think you're telling me you're using a backwards compatible Digital8  camcorder to capture your video as DV-AVIs. Is that right?" YES
    "Are you using  Premiere Elements to do this capturing?" YES, AS ABOVE PE8
    "Go to the File menu and select Properties. It should show a standard DV codec being used for your video and audio."
    WMP v12 is dumb. Under properties, media, it says 'video.'  However, avidemux gave me the information state above: video -- Codec 4CC: dvsd, frame rate: 29.971 fps; audio -- codec: PCM, channels: Stereo, frequency: 48 kHz.
    So, back to the Questions:
    1.  Why doesn’t the source  monitor play the video? Is this a problem with PE8 (latest update as of 3  March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
    2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

  • Real Nokia 5610 doesn't play Video in QVGA at 30fp...

    Hi all, I really disappoint that my Nokia 5610 doesn't play any resolution of video at 30fps, even i've tried whatever bitrate, whatever resolution (QVGA, QCIF, ...), whatever audio bitrate, it still can't play back smoothly with 30fps, onlt 15fps it supports. So why Nokia provide such imperfect information to us. My friend 5610 also can't playback 30fps, QVGA.

    Umm, this is interesting...
    Message Edited by el_loco on 15-Feb-2008 07:56 PM
    640K Should be enough for everybody
    El_Loco Nokia Video Blog

  • My nano 5th generation, plays a little music stops and reboot. the videos play without a problem, what can i do?

    my nano 5th generation plays a little music, then stops and reboots.  only when i play music.  it does this each time i play music,   the videos plays non stop, no problem.  what is the problem?  .....PLEASE HELP!

    Hi maryboneapart,
    If your iPod nano is restarting itself while playing music, I would suggest trying each of the steps in this troubleshooting assistant, checking after each one to see if the problem continues:
    iPod nano (5th generation) Troubleshooting
    http://www.apple.com/support/ipod/five_rs/nano5gen/
    Cheers!
    - Ari

  • Problem: Audio from the video plays, but video does not show.

    Hi,
    I used the following code to play the video. The audio from the video plays displaying the player but there is no visual.
    There is no problem with the video as I have tried several other videos with .mpg and .mov extensions.
    import javax.swing.*;
    import java.awt.*;
    import javax.media.*;
    import java.awt.event.*;
    import java.net.*;
    public class MediaPanel {
        JFrame frame = new JFrame("Movie Player");
        static Player player = null;
        public MediaPanel(){
            try{ // method using URL
                URL url=new URL("file",null,"c:\\temp\\A.mpg");
                player = Manager.createRealizedPlayer(url);
            } catch( Exception e) {
                System.out.println(" Unable to create the audioPlayer :" + e );
            Component control = player.getControlPanelComponent();
            frame.getContentPane().add( control, BorderLayout.CENTER);
            frame.addWindowListener( new WindowAdapter() {
                public void windowClosing(WindowEvent we) {
                    MediaPanel.stop();
                    System.exit(0);
            frame.pack();
            frame.setSize( new Dimension(600,600) );
            frame.setVisible(true);
            player.start();
        public static void stop(){
            player.stop();
            player.close();
        public static void main( String args[]){
            MediaPanel panel = new MediaPanel();
    }

    use this code "Component control = player.getVisualComponent(); "
    instead of this code " Component control = player.getControlPanelComponent();"
    But if you want show both of them, modify as following
    Component control1 = player.getControlPanelComponent();
    Component control2 = player.getVisualComponent();
    then add the two control (control1 & control2 ) to your JFrame panel

  • Encounteri​ng with the problem of capable video play modules

    I have owned a HP DV6 Pavilion Laptop , 4 years ago. Now i am unable to run any kind of games on my system which is bit irritating. I am a filmamking student so video editing software like Adobe Premiere Pro shows continous error during the startup process and ultimately crashes.
    The message which displayed is "Adobe Premiere Pro could not find any capable video play modules. Please update your video display driver and start up again". I have updated video driver but it is still showing the same error.
    I cannot run any games and video editing softwares. Please help me regarding this problem and provide me the links that from where i have to seek help.

    Hello tanay2904,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that your computer is producing error messages in regards to the video graphics modules, and I would be happy to assist you! To begin, I will need to ask you a few questions: 
    What version of Windows do you have installed on your computer?
    Has your computer completed all of its important Windows Updates?
    Have you updated your HP drivers using the HP Support Assistant?
    Is this an on-going, or recent issue?
    Which games are you attempting to play on your computer?
    What specific version of Adobe Premiere Pro are you running on your computer?    
    In the meantime, I recommend downloading the latest drivers for Adobe Flashplayer and Java. These will help with the compatibility between your software and the graphics hardware on your computer. In addition, if you are using Windows 7, you can download and install the Intel High-Definition (HD) Graphics Driver as well as the AMD High-Definition Graphics Driver. These drivers should help with the performance of your programs.  
    Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
    Regards  
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • X3-02 Convenience, problems & firmware update

    I've been using this phone for 5 months
    V 05.60 installed and no updates available noted in OvI Nokia Suites
    Of course first problem I have and most users encounter is the wireless can be connected but cannot be accessed or used... sad one feature down...
    Second, when a msg come, I want to unlock and click the "unlock" on the screen suddenly the screen become blank and the phone like "empty" or “die” and not responsive to anything...
    I hv to wait for a few minutes then I can unlock the phone and reply the text.
    Third, the music button key is very convenience but when I play video then I need to make a call I have to quit everything (similar when I'm browsing) just to make a single phone call...
    The problem is on resuming the video if we use the dedicated music/play button the video will got only sound but no video... (Sad).. If I open again from the gallery, I hv to watch the video all over again from the beginning...
    Overall the phone is good and no other problems encountered.
    If possible the dedicated key can resume the video with the picture as well, video support navigation as we can navigate to whatever time we want inside the video (watched half way and want to continue another half not all over again) and support a little multi-tasking like no need to quit application just to make a short phone call. Hoping can access and use wireless as it is much faster rather wasting money on slow connection
    Hope the new firmware update fixes these problems and gives us more convenience
    Thx in Advance

    Connect the phone to PC and open OVI Suite.. Goto Tools-->Software updates..
    For the Phone software you may see something like this(if there is no update available..)..  Device Software version v xx.xx installed. If you are having problems with it you can reinstall it .. Clicking on reinstall it will do it..
    --------------------------------------------------​--------------------------------------------------------​--------------------------------------------------​--If you find this helpful, pl. hit the White Star in Green Box...

  • Video playback problems [6500 Slide]

    Video playback at 25, 29.9, 30 fps is jerky, only 12.5, 15 fps videos play correctly... Lowering the bitrate or using a less complex profile/codec doesnt help much. Funny thing is, it can play its own videos which are whooping 640x480 @ 25fps and 2000-3000kbps [for comparison: the videos i encoded were only 320x240, 25fps, 200kbps] without a problem! O.o So, why has it problems playing my less complex to decode videos?
    I tried following ways of encoding in SUPER:
    MPEG4
    h.263
    XviD (h.263/basic)
    320x240
    25, 29.9, 30 fps
    AAC
    2ch
    44.1kHz
    96kbps
    All jerky! :[
    But halving the fps... Viola, it plays fine!
    Is this a known issue?
    Will this be fixed in the next firmware? Hope so! >.
    Cant nokia release some video coding tool with profiles for each phone model, to ensure flawless playback!? -.-
    Regards, KD

    I found the intel driver doesn't like xv output.  In VLC go Settings > Preferences > Video > Output modules and set X11 video output. See if that works.  If it does you can do similar things to totem using something in the gnome-media package (can't remember what exactly of hand...)

  • My Nokia C3 does not play youtube while connected ...

    My Nokia C3 does not play youtube while connected through wifi, well it does play with my GPRS connection

    Yes, I am having the same problem. All other things are working but youtube videos are not playing on Wi-Fi???
    Someone from Nokia please help.
    Vishal
    Moderator Note: Personal details removed. We kindly ask you not to share your personal contact details publicly on this forum.

Maybe you are looking for