Nokia C5 flash light issue

Hi, First i set the flash light off to capture images in daylight.It worked fine.I exited the camera then and reopened it.Now i tried to take a picture using camera and flash light was on now. Why the camera is not able to remember its previous flash light mode....

I love my C5 .
My phone does not have flash light issue .
I brought it from US directly to my home town .
And this was only possible with the help of http://www.viaddress.com) The Global Leader in Package Forwarding.
This company is very cheap and relieble too .
I really recommend you all for shopping from US
Thanks
Attachments:
donkey.jpg ‏33 KB

Similar Messages

Camera flash light issue

I have purchased Xperia Z1 in Feburary 2014 and having flash light issue in Photos. If i click without flash then image comes fine but if i click with flash then at the bottom of Image(flash side) there is a extra light comes which is flash light. And that flash look more ugly if i click in low light enviroment. I used all of settings (Auto, Daylight, Night Scene). In all setting if i click in low light there is extra flash comes in Image.
Note : My Xperia is full update using sony update.

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
I suggest that you have your phone examined by a service center. Please contact your local Xperia support team for more information:
http://www.sonymobile.com/global-en/support/contact-us/
What are your thoughts about this forum? Let us know by doing this short survey.

HP Photosmart C7280 Power issue with flashing lights

I have seen many posts on the web regarding flashing lights and incorrect shut downs.
http://h30434.www3.hp.com/t5/Other-printing-questions/Photosmart-C5180-Power-Up-Power-Down-Problem-L...
I have tried everything including the "*,#" with "1,2,3" to reset the printer and I have the power cord plugged into a direct outlet, not a power strip, and nothing works. Even if I do get the printer reset and it works, shortly later the lights will start flashing again and I see a blue screen with a power button symbol and some varying code (00729C98) - it varies each time. It flashes after a short time even if I power down correctly - all on its own if plugged in. Is there a defect with faulty part on the control board? If so who do I take it to to get it fixed? The printer is less than 2 years old.

I recently had the same problem with an HP Photosmart C7280, the same model as yours. I eventually managed to get through to HP Technical Support, and they advised that the unit would have to be replaced. I think if you call through, you can get a refurbished model for a cheaper rate.
Before calling technical support, I tried all the steps that have been recommended in various posts, but nothing helped. To the best of my knowledge - and I really tried to get my printer working - the unit is dead.
(Although this is an old post, I came across it when trying to fix the same issue. So, hopefully this will help anyone else who stumbles upon this post. Some other codes my printer showed on the HP "blue screen of death" were B83FCB56, B0075110 and B02BAEC3.)
Regards
Tim

Nokia 6300 blue flashing lights

For all the Nokia 6300 users troubled by the batt consumption due to blue flashing lights, the solution is go to settings-profiles(select ur current profile)-light effects-off.
The lights wont disturb anymore.
Note- i'm reposting this info which i originally found after searching the forum. Info originally posted by tnhan(advanced sage).
I'm delighted after turning them off.
Please mark the post as solution if it solves your problem.
Current Device - Nokia Lumia 1020/920

thanks for reminding us
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Camera Issues -- Flash light

All the pictures I took with the flash light were covered by a white layer. My Z1 has been updated to the most recent version. I tried to use the auto-mode or manual mode. I always get a white layer, like I am in the fog on all my picture.
Please help!

Well, me and my friends were testing this phone and out of 20 people 2 had this problem i was one of them
... we all had same model of black xperia z1.
I managed to get to the bottom of this .... i think. First of all if u have additional case cover with too small "window" around the lens or additional protective foil the problem is getting even bigger.... foil transports more light fom flash so check if the photo is better wothout additional protective foil or case cover (im not talking about original one).
Anyway....
My phone has silver border around the lens and i had same problem over and over again. Sometimes when i restarted it i managed to get few pictures of god quality.........one day i just painted this silver border with thin black marker with caution and....viola.... problem dissapered... funny thing because out of 20 same models ony 2 experienced same problem ... all looked the same, dunno maybe flash is brighen on those 2 mabe some other problem ....anyway i know its not the best solution and it but it helped me. cheers

White flash light on Nokia N95

do enyone know trick or app to have white flash light on for a few minutes?

Hi, assuming you want to use the flash as a torch, try this
http://www.symbian-freak.com/news/007/09/freeware_the_all_in_one_torch.htm
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Hey Dears, I was working with my Macbook pro 2011, then i have some flash light in the screen, so i shutdown the computer, when i try to open it again i had a black screen, so any one of you have any idea about what should i have to do ?

Hey Dears, I was working with my Macbook pro 2011, then i have some flash light in the screen, so i shutdown the computer, when i try to open it again i had a black screen, so any one of you have any idea about what should i have to do ?

Can you start Firefox in [[Safe mode]] ?
You can also do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can initially skip the step to create a new profile, that may not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

How do I fix Cartridge Error and flashing light message on my 4215xi all-in-one? I use windows 8.1

This equipment was working just fine after I installed a re-filled black ink cartridge. A few days later I began to get a flashing light with the message: Cartridge Error. See Product Documentation for details. Sometimes my computer said the printer was offline when it wasn't. I have also had occasional cartridge door open messages when the door was closed. I have removed the two cartrdges, cleaned them with water by using a coffee filter as a swab. I have also uninstalled and, I think, reinstalled the software printer driver, but I am not entirely certain as to that.

Hi there @donpablitosan!
Thank you for posting on the HP Forums!
I would be happy to help in regards to the flashing lights and cartridge error on the printer. You had also mentioned that the computer sometimes shows the printer offline or door open errors. I should be able to help with that as well!
The first thing I suggest is to plug the printer into the wall outlet directly if it is currently in a power surge protector or extension cord. This may sound silly but this will ensure the printer is getting full power and may eliminate any unnecessary troubleshooting. If the printer is no longer getting full power from the power surge or extension cord it may give false errors or have poor connection and paper feed issues.
From what I can find it looks like you have done all the troubleshooting regarding the cartridge itself. If you have tried the above suggestion and are still getting the same issue then you may need to try another cartridge to see if the issue is coming from the printers hardware or the cartridge.
Thanks again for posting on the HP Forums!
Please post back and let me know how it goes and enjoy your day!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

Problem with the yellow flashing light on AirPort Extreme

I'm trying to use my AirPort Express and have a yellow flashing light. I contacted ISP and we tested the connection by plugging the modem into a PC directly, so there is a working connection. I tried the Airport utility and it identified an error, stating that no connection could be made
I'm not sure where to go with this, my understanding is that the AirPort Express should have no trouble communicating with modems, so it can't be an issue of hardware.
Any suggestions very welcome!

Whenever you change whatever device is connected to your modem, be sure to power down the modem first.
It will refuse to communicate with anything else, unless you do.

Black screen red flashing light

Plz help.
Today my touch screen on my bb torch 9800 wouldnt work, I did a battery pull and now my phone wont switch back on. the screen is black and there is a red flashing light.
I have had my bb neary 18 months and never had a prob before.
Can you advise what i should do next,

Hi and Welcome to the Community!
Put your BB onto a known-good wall charger for 2 hours, and do not touch it. Then, with it still on that charger, remove the battery, leaving it out for 5 minutes (with the BB still on that charger!). Put the battery back in. If it boots up, leave it alone (still on the charger) for 5 hours to see if it will fully charge and function again.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Flashing light in Wrotham supply. And not working wi-fi..

Hello.
Flashing light in Wrotham supply.
And not working wi-fi, or rather does not recognize the access point.
They are not on the list .
But the access point is at hand.
Please send me the answer to email (Personal information removed by Moderator)

Hi @Game_Developer
Welcome to the HP Support Forums!
I understand that you are having trouble with wifi connectivity. What light is flashing on that supply? I assume it is the power supply.
Have you tried your notebook with a different wireless network?
Do other devices connect to your router without any trouble?
I would start with this to make sure the wireless is working properly on the notebook, or appears correctly in device manager.
Resolving Universal WLAN, Wireless, and Wi-Fi Errors
And only after verfying that all is good, would you want to look at the following steps, if you are still having troubles.
Troubleshooting wireless network and Internet (Windows 8)
Also, you can look at the power management for your wireless adapter:
Disable the Power Off option for the adapter:
1. Open Device Manager. (Win Key+R > type devmgmt.msc > OK)
2. Expand the Network adapters.
3. Right click on the Ethernet/Wireless Adapter and click Properties.
4. Click the Power Management tab.
5. Remove the check mark beside Allow the computer to turn off this device to save power.
6. Click OK.
7. Test.
Forget the network: (Windows 8)
1. Press Windows Key + C
2. Click Settings.
3. Click Change PC settings.
4. Click Network on the left.
5. Click Manage known networks.
6. Click the network name.
7. Click Forget.
Reset the TCP/IP settings on your PC:
1. Go to your start screen/menu and type CMD.
2. Right click on the command prompt icon and chose Run as administrator.
3. In the window that opens type "netsh int ip reset resetlog.txt" without quotes, and press enter.
4. Restart your PC and test.
It may also help to reset the winsock catalogue:
1. Go to your start screen/menu and type CMD.
2. Right click on the command prompt icon and chose Run as administrator.
3. In the window that opens type "netsh winsock reset" without quotes, and press enter.
4. Restart your PC and test.
Reinstall the network adapter drivers:
1. Download the drivers from here but do not run them yet.
2. Go to your start screen/menu and type Device Manager.
3. Expand Network adapters.
4. Right click on the wireless adapter and choose Uninstall.
5. Run the downloaded drivers from step 1.
6. Restart your PC and test.
Test an ethernet connection:
Self explanatory. Test if the issue persists on a wired connection to rule out the wireless adapter hardware so troubleshooting can be directed towards the right areas.
Test another connection:
Many people rule out their home network as an issue if another device is working on the same network. Networking is not that simple. Each device interacts differently with your router or modem and it is impossible to rule out settings in that device until the notebook has been tested on another network.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

How to turn flash light on (N96)?

Hi,
I was wondering how can I turn on the flash light on my new Nokia N96. I need it e.g. to see in the dark etc.
On my N93 for example I have a separate button for this function.
I have tried with an old application NTorch Lite (OTStudio), which doesn't install correctly, and SpotOn, which does install but I get a "camera error".
I can install both of them fine on N93, though only red light is flashing.
So is there a way to do that or is it really possible that such a modern smartphone doesn't have this function?
Thank you for your replies!

... well I have troubles with installing that application on my N96 (as I already stated above) ... I can install it (I see some strange symbols during the installation; before you have to change the date on the phone), then I have problems when entering the code (I don't see the inserted numbers) though it seems that application does accept the code.
I hear the beep after I start the program but then nothing happens. Well I saw flash light emitting light only once and I actually don't know if that was because of the NTorch or not.
So I presume that the application is unstable.
P.S.: NTorch http://gallery.mobile9.com/f/142226/
Message Edited by ultrap on 16-Oct-2008 11:18 PM

Why is the flash light on iPhone 6 half red?

I have noticed that the flash light (near the camera) at the back of iPhone 6 is half red, Any idea why?
Cheers!

Hi Rockstaprince,
If you are having unusual flash behavior on your iPhone and you are unable to turn it off from Control Center, you may want to make sure your iPhone is fully backed up in iTunes, then try restoring it to factory settings and see if the issue persists prior to restoring your backup. You may find the following articles helpful:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
Apple Support: Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/ht1414
Regards,
- Brenden

Strange noise and flashing lights -- can this be battery/power-related?

I have had two occurrences of a very strange sound and never-before-seen flashing of a light on my TiBook. Here is what happened:
I recently got a new battery (a NewerTech Extend 4800) for my 3 year-old PowerBook. I carefully followed the directions that came with the battery and installed it, then plugged in the power adapter to charge it up. I then started the computer so I could see the battery’s progress. Upon start-up, a “whooo” sort of sound came out of the computer for a few moments and the little sleep indicator light flashed several times (as did the apple light on the back of the computer lid). Nothing appeared to be out of order and the computer started normally otherwise. I was able to monitor the battery’s progress and since everything seemed to work normally and no one I talked to seemed to think I’d damaged anything, I just used the computer normally for the next two weeks with no problems.
Then last night the computer just shut down all by itself – I did not put it to sleep and it is not set to go to sleep on its own (my power saving setting is only set to dim the screen), nor did I click “shut down.” I thought perhaps somehow the power cord had not been attached and the battery had run down, although the new battery has been warning me properly when the battery is getting low, so that doesn’t make sense. It would not wake, so I restarted it. Upon restart, the same noise and flashing light situation occurred again.
I called the company that sold me the battery and the tech guy’s suggestion there was to reset the PMU and he gave me an Apple article to instruct me on how to do that. I have done that, but there is no evidence that that has solved whatever the issue was. I am hoping that someone can identify the sound and lights pattern and advise me as to whether it is some more serious issue, or if it’s nothing to worry about. It has been suggested to me that it is possibly a power adaptor issue, but since I’ve run down and recharged the battery without incident several times in between the two occurrences, that doesn’t seem logical either. Is there a known signal a computer makes when there is some power/charging issue?
Thanks for any help you have or for at least posting if you have had a similar experience. So far, no one I’ve talked to has ever heard of this before.
15" Powerbook G4 (tiBook), 1 Ghz, 1 GB, Super Drive Mac OS X (10.4.3)

Hi ChloeB,
Your description of the "moaning" sounds at startup sounds like something I'm dealing with. I came across the following post by EWW in the "My Powerbook Won't Start Up". I recommend the link and wish to specifically credit EWW with the posting, as I found it helpful. The URL is
http://discussions.apple.com/thread.jspa?threadID=380101&tstart=0
Begin Pasted Posting
Hi, limberlingo, and welcome to Apple Discussions.
Power On Self-Test Beep Definition - Part 2 (Oct. 1999 and later Macs)
http://docs.info.apple.com/article.html?artnum=58442
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
Your Powerbook is not detecting any good RAM at startup. This may indicate that your RAM (all of it — do you have one module or two installed?) has gone bad, or that it isn't seated properly. The first thing to try is reseating it: remove the module(s) and then reinsert it(them). Then try starting up again. If that doesn't do the trick, and you have only one RAM module, it's probably bad and will have to be replaced. A single RAM module having intermittent problems before failing completely (as it apparently has now) would account for all your problems.
If you have two modules, it's much less likely that both of them have failed or loosened in their slots simultaneously. Post back with results of your testing.
End of Pasted Post by EWW
There's another thread I found where one of the causes of a three-tone warning was found to be a pinched ribbon cable coming off the bottom of the trackpad. You can find that in the thread titled "Solution to Freezes Caused By Ribbon Cable" - - the information provided by Marc Posner, Anthony Brade and others.
The URL is
http://discussions.apple.com/thread.jspa?threadID=228678
Hope this helps.
Paratus

Iphone 4s won't turn on, but flash light is on

Hello all, I have an iPhone 4s which is approx 5 weeks old, has never been dropped and has no water damage. The other day the flash light came on and I couldn't get it off but the phone was working perfectly fine. Then the phone died and now I can not get it to turn on. When you plug it into the computer it is not recognized and the screen is just completely black there are no signs of it saying its charging or anything, all that happens is the flash light turns back on. I have tried pressing all the various buttons for various amounts of time, both plugged into the computer and not plugged in, but nothing seems to work. I am currently in the Galapagos Islands for another 3 weeks so I can't go to any places to get any help and it is my only camera here so it's a serious bummer. If anyone has any suggestions please let me know, it is greatly appreciated!!!

personally the only time i have seen this is with liquid damage or fake parts fitted to the device
(if it is fake parts apple will have to deny service)
under the tab in the dock connector you should see a small sticker in the middle (white is good, orange/red is liquid)
also the same applies to the bottom of the headset jack in the top of your handset
if you have any further issue or still not sure as to why this is happening simply book a genius bar appointment at your local apple store via www.apple.com/retail

Nokia C5 flash light issue

Similar Messages

Maybe you are looking for