Nokia c5- receiving speaker(ear piece) has low vol...

Y nokia is not increasing ear piece (receiving) volume??? Its almost an year I bought c5, only trouble I have is receiving volume is very low, if it is in traffic I can't hear any thing. I waited for June software update thinkin dis prob will b solved but dint happen... despite this prob, c5 simply rocks... i hope nokia releases a small updated before december regarding this issue. 

Doubt you will get an update there is a new model,
http://www.gsmarena.com/nokia_c5_5mp-4019.php
If  i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

  • The ear piece on my phone has gone quite

    Ive had my iPhone 4 for nearly 2 years & all of a sudden the ear piece has gone very quite I've turned up the volume without success any suggestion please.

    "ear piece" - do you mean the ear speaker on the phone or the headset?  You need to provide more specific detail, including what troubleshootings steps you've tried.

  • Ear piece not working

    My wife's ear piece has no sound coming out of it.  Ear buds and speaker both work when making phone calls, but nothing is heard in ear piece. Anyone got any suggestions?

    Is the iPhone brand new? If yes, maybe the factory protective plastic screen cover is blocking the earpiece speaker.

  • Ear piece speaker has stopped working. help?

    i have to use my loud speaker to talk to people over the phone as my ear piece speaker has broken suddenly. does anyone know the best way to fix this?

    Please visit http://www8.hp.com/uk/en/home.html
    on right hand side top, click "connect with HP" icon, you have options to email HP or call HP.
    hope it helps, Good luck !!!!
    Regards,
    WW
    “I am an HP Employee“
    ***** Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

  • Help with Bluetooth operation from a Nokia BH-200 ear piece

    I can pair the Nokia ear piece to my iPhone but can not get the ear piece to activate calling or receive calls. It is the same issue I have with my Nokia Advanced Car Kit CK-7W. All I can do is pair up the iPhone.

    Hey Phil,
    Is the iPhone pairing with the Nokia correctly? Does the iPhone ask for the pass code of the Nokia?
    You'll have to make the headset discoverable before the iPhone can see it an pair with it.
    This article provides general tips for pairing a 3rd party bluetooth headset with the iPhone.
    http://support.apple.com/kb/HT1664
    Jason

  • I am unable to hear anything on my iphone 4 nor can the person i call hear anything when i speak - I think that my ear piece and mike have both got magnetised how do fix the problem

    I am unable to hear anything on my iphone 4 nor can the person i call hear anything when i speak -
    I think that my ear piece and mike have both got magnetised how do fix the problem
    Please help

    I have the same problem!! It lead to many other problems with my phone
    I just arranged a repair with apple. Yes its inconvenient to be without a phone for a while but if your phone is in warranty its good to get it looked at professionally!

  • HT204368 have a blueant Q2 that does not like to stay connected. Have phone in shirt pocket but ear piece drops in and out at will. Blueant says they do not have a proble, has to be Iphone. any ideas at $99.99 plus tax and can't use it, well you figure it

    Received new iphone 5 for Christmas. Also Blueant Q2 blue tooth ear piece. Phone works great, blueant, not so. Have had numerous emails and phone calls to tech about dropping out. There is no active phone, you are connected and all I have to do is move my head to have either happen. I keep the phone in my shirt pocket and it can't be over 10-14 inches from one to the other. Any thoughts and suggestions???? At $99.99 plus tax just can;\'t afford to hit it with a hammer.

    Didn't really read much at all of your post. Much, much too long, irrelevant details and & no paragraphs.
    Can't use time machine due to corruptness
    Post over here -> Mac OS X v10.6 - Snow Leopard forum
    About my macbook and apple ID how can I upgrade my Macbook from 10.6.3 to 10.6.8 with out all the permissions being changed and corrupt??
    Same as above. Post in the correct forum.
    Need to gain access to my apple Id that would be a great start
    -> http://support.apple.com/kb/HT5625

  • The left speaker has lower volume than the right speaker of my pavilion g4-1202ax..

    please help me with this problem..
    the left speaker has low volume..
    but the balance is equal..
    what should i do??
    is any one there wants to help me?? 

    I tried tightning the cables to the computer too.

  • The ear piece on my 4s has stopped working help??

    Help my ear piece just stopped working

    "ear piece" - do you mean the ear speaker on the phone or the headset?  You need to provide more specific detail, including what troubleshootings steps you've tried.

  • Sound is coming from the ear-piece and its really really low

    Title pretty much says it.
    My iPhone is acting really weird ever since this morning, sound isnt coming from the bottom speakers anymore but instead from the ear-piece and its really low.
    I tried resetting the phone with holding down the home and sleep button at the same time but its still the same.
    Anyone else having this problem?

    Connect the headset to a computer or stereo or anything else with 3,5mm minijcack to see if the headset is ok of they work there then your headset is defect if not your phone is the problem

  • Nokia 6121- ear piece won't work

    When I plug in the ear piece to my phone it doesn't seem to work. Can anyone suggest a setting I might be able to change to get it working? Or does it seem faulty? In enhancement settings I have the default set to headset.

    I have the exact same problem. It seems that all mail is contained in the folder "All mail". At least that is the case with my phone. This is very annoying.
    A fix anyone?

  • 1020 ear piece 'Lisp' - audio settings update 2.1....

    I have had several 1020's, 10 in fact that all suffered with the same issue.  When talking to someone, it sounded like they had a lisp.  this was only previlant when listening through the normal ear piece speaker.  It only did it when connected, ringing tone was fine.
    Thought it must be the phone so sent it back, then again and again...
    Tried hard re-set, soft re-set nokia recovery software, the lot.  All phones did it.  they were all yellow, sim free.  Now, I am currently on a Vodafone 4G contract.  Each phone has been sim free. Sim card has been changed more times than I have had hot dinners.
    Strangely enough, I updated the audio settings to version 2.1.4.1 and it has got massively worse!!! so much so that it's almost un-useable.  And, users at the other end can also hear the lisp and it's terrible.  So much so that I am going to hard reset the phone again and not carry out the audio update.
    I also noticed that although I had not changed my volume settings, the phone was definately quieter.  Shame, this is one update that's a complete screw up.  However, it would lead me to think the lisp issue is sofware related and not hardware.... perhaps....

    Wow, I guess no-one else has had this issue.

  • High pitched annoying vibration in receiver speaker inside phone

    out of the box my 16g iphone 3g has a very annoying vibration thru the receiver when someone is talking to me. sounds like the speaker is loose or blown anyone else having this problem? It happens even when the speaker is turned to low volume.

    Having the exact same problem with my 16GB. I only notice it when the ear volume is more than half way up. It stops if I slide my ear to the very top of the phone but holding it in a comfortable position there is a vibration. It almost sounds like when you crank up the treble on a radio and get a high pitched vibration / cracking.

  • Microphone no longer works with ear piece

    I have a BB 9800, and I recently downloaded the latest 6.0 OS Bundle 2921. Since then, I cannot use the ear piece when making calls. The speaker/handset menu goes back and forth and there is no sound in the ear piece. I can no longer take calls in the car while I drive. How do you resolve the problem?

    Hi and Welcome to the Community!
    Something may have gone wrong during the OS load, which would then mean reloading would be the thing to do. Or, there could be something wrong with that OS package, and you should try a different one.
    You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
    You may also want to try this procedure to perhaps narrow down the precise causal item:
    Load your OS "bare bones"...if anything is optional, do not install it.
    If the behavior presents immediately, then try a different OS with step 1
    If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
    Add one thing -- no matter how tempting, just one.
    If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
    Repeat steps 4 and 5 until all things are loaded or the behavior presents
    When the behavior presents, you know the culprit...the last thing you loaded.
    If the behavior does not re-present, then you know that either step 1 or 2 cured it.
    If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Problem with ear piece

    I am using the communicator 9500 model. Recently I started having earing problems when receiving a call. I can only hear a caller with the speaker phone, i.e. when the phone is openned. This affect my privacy, as everyone could hear my conversations. However, when I take the battery off and turn it on again, the ear piece would start working, but for a few hour only. What do I do and what could be the problem?

    maybe you could take the phone to an engineer? sounds like a problem with the hardware itself...

Maybe you are looking for

  • How do I get rid of the stupid menu bar on my 2nd display?

    I do not want my menu bar to display on my 2nd monitor. The fact that apple decided that it would be okay to reduce my usable space on my 2nd screen infuriates me. How do I revert this back to how it was previously? I don't want the menu bar (or the

  • Creating a PR for acquisition of an asset

    Hi everyone, This week some friend were talking about the process to buy an asset and we're a little bit concerned about the situation below. A user created at IMA11 a request to buy some laptops and then he created an internal investment order relat

  • Can't open certain images in iPhoto

    Hello. Ever since I installed iLife'06, I can't open certain thumbnails in iPhoto. They are there, you can see them, but if you double click them to open them, you get the 'searching' ring forever. I made a duplicate of one of the thumbnails, and it

  • h:dataTable and c:when

    Hi, I am trying to use jstl inside datatable but it always goes into the otherwise though the flag is true in <c:when. pls help if anyone had the same problem..Here is the code i have written <h:dataTable value="#{pc_ResetPassword.secQuestions}" var=

  • Nowhere can input reason code in function BAPI_ACC_DOCUMENT_POST

    Hi..... Field Reason code is a required field for a G/L account,But it seems that nowhere can input it in function BAPI_ACC_DOCUMENT_POST's table parameter ACCOUNTGL.Thus I can use this function to create Accounting Document .....How can I solve it ?