Nokia C6- Touch Screen is not responding

Hi 
 I have bought a nokia c6-00 few month back.. from last two-three day, the touch screen of this cell is not working properlly..Even i have restarred mobile many time..some time is working..but within the second again faceing the same problem...
Is any one faceed this type of problem. is this a software or hardware proble..
it is very disappointng me..
Please have any solution for same..
Regards
shtru

  Hi  Shtru,
I will suggest you try and calibrate the device first by using the keypad, the steps to do this are as follows:
Menu > Settings > Phone > Touch input > Touch screen calibration. Follow the instructions on the screen.
This should address your issue.
If this post answers your question, you can help others by clicking the green accepted solution' button.
Please ask your questions to the main board and not to my mailbox. Thank you.

Similar Messages

  • My ipod nano touch screen is not responding please help, and i tried to hold down the volume and power button but its still not working

    ipod nano touch screen is not responding to my touch and whenever i click on something it just shows up as a white box

    Have you double check to make sure VoiceOver and other accessibility features have not been turned on?  See this article for more information and assistance.
    iPod nano (6th generation): How to use VoiceOver
    B-rock

  • My touch screen is not responding, I have reset the phone, plugged into different charger and tried to update it to itunes but they will not connect because I cannot put my passcode in, HELP please!

    My touch screen is not responding, I have reset the phone, plugged into different charger and tried to update it to itunes but they will not connect because I cannot put my passcode in, HELP please!

    ME TOO.  NOW MY IPHONE 6 PLUS IS SAME LIKE YOU.
    iphone is diabled- connect to iTunes because i forget passcode.
    i cannot connect iTunes because it's always asking to enter passcode on iphone.
    So, i cannot make restore my iphone 6+. And then, I cann't erase "device" in icloud.
    My iphone is new. No icloud. didn't connect to itune backage.
    That's why I try to connect iTunes but it need to enter passcode.
    So, my iphone just keep "iphone is disbled-connect to iTunes".
    IPHONE 6 PLUS

  • Portion of my iphone touch screen is not responding

    Portion of the iphone touch screen is not responding while typing (both horizontal and vertical). All other functions are O.K.  Is it LCD problem or any calibration problem ?  Some experts says the LCD screen is to be replaced ?

    basic troubleshooting steps from the User Guide are restart, reset and restore.  Have any of these been tried?

  • Ok my iphone 3g touch screen is not responding, i can recieve calls and it can charge and connect to itunes, but i cannot go any further than using the home button or the power button, but the slide feature and touch feature is non existent

    ok my iphone 3g touch screen is not responding, i can recieve calls and it can charge and connect to itunes, but i cannot go any further than using the home button or the power button, it is only the slide feature and touch feature that has become non existent.  Also, i have a f'ew cracks in my screen for a while now and it was running smoothly up until saturday when i sat on it applying large amounts of pressure to the phone screen.  Is there a way i can fix this myself without having to recover my phone to factory settings or wasting 50 bucks to get it fixed??

    Hi Dire Dawa,
    If the screen on your iPhone isn't responding, you may find the following article helpful:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Regards,
    - Brenden

  • My phone freezes and the touch screen does not respond to my touch.

    My i-phone 4 has been freezing up on me as of late.  The buttons will still work but the touch screen does not respond to my touch.
    Is my phone hooped or can I do sometinhg to fix it?

    First thing to try is a reboot of your iPhone. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPhone restart. See if that fixes your problem.

  • My apple iPad touch screen is not responding

    My apple ipad touch screen is not responding it was working since few hours then that happened. There is no a single point on the responds to touch but everything is working on the welcome screen, detects  the Wi-Fi ... etc.
    First thing I did was passing on my local agent store. They did a soft reset what caused lose all data and apps (not a problem) but they didn't fix and asked to visit the support branch .. now i can't use the "Siri trick" and I think it's not helpful after resetting my device.
    I tried removing the screen protector but still no hope. Turned off it and cleaned the screen  but didn't help!!
    Is There another way? Any expected scenarios/time when I visit the repair branch in Egypt?
    I've upgraded to latest (7.12) 2 or 3 weeks ago

    Thanks ..
    I've mentioned that I did that now I'm in another stage, The iPad at the main reseller support department and they told me now that they will give me another in return .... the strange thing I have heard was that I have to wait 4 weeks until they get me one from Apple .. I'm i Egypt 

  • HT1222 my Ipad touch screen is not responding so i can not use the ipad for anything.

    i left my ipad in my car after ten minutes return to use ipad but could not log on because the touch screen is not responding. i try updating but to no avail
    pls somebody should tell me what to do before i lose my mind because its really frustrating

    Did you try rebooting?
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • My iPhone 4s touch screen is not responding

    Hi, my iPhone 4s touch screen is not responding. Please help! Thank you.

    you can try to restart it
    http://support.apple.com/kb/HT1430?viewlocale=en_US&locale=en_US
    if it has no effect then one would suspect a hardware malfunction

  • My touch screen does not respond to my "slide to unlock". reset does not help. iPhone 4S works otherwise.

    my touch screen does not respond to my "slide to unlock". reset does not help. iPhone 4S works otherwise.

    I cannot use it. I can get calls and text messages but I can't respond because the screen is locked and I can't "slide to unlock" because the touch screen does not work.

  • New ipad2: touch screen does not respond

    Hello, my name is Alessandro, I'm from Italy.
    I bought a new iPad 2 from Apple Store. After a day of use the touch screen does not respond and sometimes executes commands at random. I updated the OS, I restored as a new device, but nothing has changed.
    Someone can help me?

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • HT1430 My  IPAD Mini touch screen is not responding, it is showing a message icloudBackup but the back up is not happening and the system seems to be hanged

    My  IPAD Mini touch screen is not responding, it is showing a message icloudBackup but the back up is not happening and the system seems to be hanged?

    Perform a "hard reset" on the device by pressing down and holding the home button and the sleep/wake button for up to 30secs. until you see a black screen with the Apple logo, then release.
    Then test to see if it solved the problem.

  • HT201406 My 2nd generation ipod touch screen is not responding at all is there anything i can do to fix this?

    I let my cuzin borrow my ipod and when she gave it back the screen was not responding, my volume button is pushed all the way in and the lock button doesnt work very well. Is there anything i can do to fix it or anywere i can get it fixed?

    well unfortunatley your warranty is over so the device is not covered,  BUT sounds like you have interupting signals being sent from a stuck home button constantly being pressed and maybe even a digitizer problem (the touch screen).  You can try to restore your ipod to your computer to see if it might be some kind of software related issue.  Just restore to the last sync you have on iTunes.  But FIRST...I would try to Reset your ipod.
    Go to Settings>General>Reset> Reset all settings.

  • My I phone touch screen is not responding ????

    MMy touch screen on my I phone 5s is not working?????

    Try the solution on this website: http://en.kioskea.net/faq/3778-iphone-the-touchscreen-is-not-responding
    Or reading this website: http://www.ifixyouri.com/blog/what-to-do-when-your-iphone-screen-is-not-respondi ng/

  • TS3293 iPad not backed up message appears and touch screen does not respond

    iPad not backed up message appears and touch screen does not respond

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot

Maybe you are looking for

  • IPod nano 3rd Gen 8G "Device Not Recognized" on 2 diffrent computers...

    I have the latest versions of iTunes on both a Windows XP service pack 3 computer and Windows 7 Laptop. I've tried multiple cords but both computers tell me "device not recognized", I've uninstalled and reinstalled all drivers. Done a reset and Disk

  • Error Message In Xcode

    hi i have recintly got Xcode for my computor and i am learning how to use the code. I am lerning form "tuturial for Xcode app" and copyed the code over for the first app i made there is a error message and i can not fix it. Here is the code and error

  • BAPI_OBJCL_CHANGE - Not updating in database

    Hi, I am using BAPI_OBJCL_CHANGE and BAPI_TRANSACTION_COMMIT to update the characteristics data but it is not getting updated but gives a success message. I used BAPI_OBJCL_CONCATENATEKEY to generate a object key passing OBJECTTABLE as MARA and in OB

  • How to keep socket alive

    Dear All Java Devotees.... I was stucked upon the following socket programming challenge in my projects first of all I have one Server and one Client what I wanted initially was client registered to server when the client abruptly terminated, it wont

  • Problem in screen programming

    Hi All, I have created a PUSH-BUTTON on the screen. On that button I am displaying a ICON by using the ICON NAME (ICON_INSERT_ROW).  It is correctly displaying in while logging in with EN language.  If I login with PT language it is not displaying th