Nokia C7 Dialing from contact list

I'm having problem dialing from contact list and recent calls.  I can only makes calls when dialing  the numbers.  I can receive calls.  Texting works fine from contact list and recent calls, but voice call can only be done by dialing the number .Phone has to reboot everytime it happens.

Hi Remembranze,
First of all, check via Nokia Suite and on the phone itself for any firmware updates that may be available. IF there is an update, please update to the latest version offered. If there is no update, then try re-installing your current firmware via Nokia Suite. Failing this, try Restoring your phone to factory settings, and if this doesn't work, then you try performing a three finger hard reset. Failing this, you will need to take your phone to your local Nokia Care point for them to inspect.
to locate your nearest Nokia Care point: http://nokia.com/support

Similar Messages

  • I try to dial from contact list, but phone wants to email.

    This appears to have happened by itself, but it's my wife's iPhone.
    She trys to dial from her contact list, but iphone wants to email even when a phone number is touched.

    Try resetting the iPhone. Hold down the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone restarts, try and see if it works. Also, can you dial a phone number and the call go through?

  • E71 Cannot dial from Contacts List

    With my E71 phone I cannot dial numbers directly from my Contacts List. I have to write number down then manually dial. What have I set wrongly? How can I correct this?
    User of E71 Mobile Phone
    Solved!
    Go to Solution.

    I found the answer myself. Just switch the phone off and on again to make it re-boot. Frustrating but just like a computer! or maybe it was taking it 30,000 feet into the air that cured it!!
    User of E71 Mobile Phone

  • Cannot dial from contact list

    Received new  4S Iphone to replace recently stolen phone.  I did sync with my lap top and when contacts loaded to phone the format is different than it was on other phone.  No dashes no area code just all straight numbers.  When I try to call from my contacts I am unable to call anyone; however, I can manually dial the number and it works.  what do I need to do?

    Try dialing *228 and then option 1.  Be sure to wait until you a get a message saying that it was successful.

  • Pause or Confirm when dialing from contacts or recents?

    Does anyone know of a way to "pause" dialing from Contacts or Recents? Touch a Recent or a phone number in a Contact and iPhone immediately initiates a call... I'm looking for an app or setting that would ask "are you sure you want to make this call" first. Thank you!

    Kind of funny, as it's certainly happened to me that I started a call without wanting to. But I've gotten used to 2 things to stop this:
    1. don't tap and release, just tap and hold, then scroll. If you tap and hold, the call won't start, and you can choose not to call by simply scrolling up or down and then releasing.
    2. keeping my thumb to the right side of the screen when looking at the recent phone call list. That way, if I happen to tap, it just opens up the contact info.

  • How to send a number by SMS from contact list on 2...

    Guys, I cracked my brains to solve how to send a number from contact list by SMS in 2630.
    Maybe there's no such option at all?
    Please help!!!
    Message Edited by berzerk on 16-Dec-2008 09:24 PM

    I don't think there is such an option on a limited phone like the 2630.
    On phones running S60 such as the Nseries and Eseries devices (and a few others) there is an option to copy a number from the contacts into the clipboard and you can subsequently paste it into a new message. Older S40 phones like the 2630 don't have a clipboard facility to do copy/paste actions.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • E75 can't dial from contacts

    Love my new E75.  Last week I could dial from contacts no worries - this week - nada, no go, no dial.  As the phone is likely smarter than me - what am I doing wrong?? 
    Solved!
    Go to Solution.

    Try this. Turn off the phone. Remove the battery. Count to 10. Put the battery back in, turn it on and see if that fixes it.
    Cheers 
    Show the KUDOS button some love.... Hit that bad boy.... It don't hurt....
    Apple iPhone 5,
    Retina MacBook Pro, iPad Mini, Nikon D4

  • Fake sending sms from contact list

    after upgrade to 4.2.1 there's a fake with sending sms from contact list. u choose a contact and choose send sms and.. addressee is blank or previous addressee... so if u dont look carefuly u can sand some impolite opinion about your boss thinking that u send it to your wife SIC!
    do someone have the same situation?

    I have a windows pc friend with the same problem

  • Can't make calls to numbers from contact list or c...

    I have a Nokia N95 8GB and have the same problem. I can key in a number and dial it, but am unable to dial from the contact list or from the call register. If I restart the phone, I am able to dial numbers from my phone book, but after some time, the same problem takes over. Any suggestions?

    Me too have same problem, guys please help !!

  • Nokia 6280 failure restoring contact list using pc...

    Hello,
    I own a Nokia 6280. Firmware - v3.81
    OS: Win XP.
    I took the phone to my local phone provider(partner orange, from which I bought the device) to update the phones version. This action has deleted my entire contact list.
    Beforehand I made a backup using the pc suite back up feature, and the backup went smoothly. Now, when I try to restore my info using the restore function in the backup(content copier),it restores everything except the contact list. Somewhat in the middle of the resotration of the contact list, an error jumps saying the connection to the phone has been list. A few seconds later the connection restores automatically.
    I tried solving the problem using this thread:
    http://discussions.europe.nokia.com/discussions/board/message?board.id=pcsuite&message.id=7746&view=...
    But it didnt quite work
    What can I do to solve this problem? How can I restore my contacts?
    And if not, Is there a way to convert the Backup NBU file into Outlook VCF format?
    Best regards,
    Uri

    09-Oct-2006
    06:07 AM
    manta wrote:
    Make sureyour contacts are in the backup file )by opening the file with notepad and searching for a string you know will be in your contacts (like a friends name or a part of phone number etc.)
    I've got my entire contact list on the backup file.
    except notepad can't disipher the the names into english, and so cant hexedit's of their sort.
    Example from the notepad of the backup file:
    BEGIN:VCARD
    VERSION:3.0 /*jibrish should be the nemes*/
    N;ENCODING=QUOTED-PRINTABLE;CHARSET=UTF-8:׳’׳ ׳¢׳“;׳¨׳‘׳™׳ ׳ ;;;
    TEL;VOICE:*phone number*
    TEL;HOME:*phone number*
    TEL;HOME:*phone number*
    TEL;HOME:*phone number*
    TEL;WORK:*phone number*
    END:VCARD
    note. *phone number* replaced by me for confidentiallity.
    09-Oct-2006
    06:07 AM
    manta wrote:
    Then restore your phone with selecting restore factory settings in settings menu of the phone.
    Then try restoring again.
    I tried to recover the phone as soon as I recieved it from the phone provider with the new v3.81. That is , the manufacturer's settings were the default. Unfortunantly that didn't work.

  • How do you remove facebook contacts from contact list in IOS 8?

    Got a new 6+ today and it loaded all my facebook contacts in my contact list. How do you remove them. In IOS7 you used to go to settings/facebook/groups in upper left corner and uncheck face book, but its not there in IOS 8

    Hey mmoore216,
    Great question! You can disable your Facebook contacts from syncing with your Contacts application in the following location:
    iOS: Using Facebook, Twitter, and other social network accounts
    http://support.apple.com/kb/HT5500
    Sync contacts and calendars
    iOS can sync your Facebook contacts and calendars with your device. This feature is off by default, but you can enable it in Settings > Facebook after adding your account.
    Thanks,
    Matt M.

  • Inbox won't display senders names from Contacts list?

    Is there a way to get the iPhone email Inbox to display the sender's name from my Contacts list when the user is on my Contact's list? As it is now, when I go to my Inbox on the iPhone, it shows a list of email addresses instead of the name's of the users, even though they are on my Contacts list. Once I click on a message and view it, then it shows the Contact List user name, but it does not show that data on the Inbox page.
    Is this a bug or is there a setting to change this behavior or something else?
    Thank you.

    Mikeintokyo and C.Moser,
    I'm with ya. I wonder if someone somewhere is working on an mail app that can both display names and allow us to use emoticons. Having used emoticons for years with my students, the sudden lack of them has some of them thinking I'm mad at them. Also, when I try to use the heartmark or other symbols available thru the numbers keypad, the email I send is apparently unreadable.

  • Is there a Template for mailing labels from contact lists

    Is t here an app to use contact list to print lmailing labels?

    Hello Jb1947,
    I understand that you want to print mailing labels from your Contacts. If your MacBook Pro is running Mac OS X 10.9 (Mavericks), there is a way to print mailing labels directly from the Contacts application. The information you need is located in the following article.
    Contacts (Mavericks): Print contact information
    http://support.apple.com/kb/PH15095
    Print contact information
    Select contacts or a group. If contacts in a group have multiple email addresses, street addresses, or phone numbers, you can choose which to print.Select addresses for group members
    Choose File > Print.
    Choose the print style from the Style menu, then set related options.If you don’t see the Style menu, click Show Details.
    Mailing labels:
    Click Layout and choose a label type from the Page menu. To set page margins, space between labels, and how many labels to print per page, choose Define Custom.Click Label and choose the address to print from the Addresses menu. Set any other Label options.
    Thanks for reaching out,
    -Joe

  • Composing SMS from Contact List

    I have a Blackberry Pearl 8100 and when I go into my contact list and select a name to SMS and then add another recepient to send the same message to it comes up with first person I selected to SMS again i.e. I picked Wendy first and added Brian to send the same message to, yet it shows Wendy's name twice. Yet, when I go to check the two mobile ph#'s that I'm sendin the SMS to, they are different as I expect. Also, if I save the SMS as a draft, and I open it up again in my email inbox it displays Wendy & Brian's name correctly. Furthermore, if I compose a SMS from my email inbox I don't get the problem I've mentioned above. Is there a way to solve this? 

    I have a windows pc friend with the same problem

  • Removing name from contact list

    There is a group to which I send a general e mail a few times a month.  I have these contacts listed under a group name, so when I type in the group name under "To" all the names appear.  There is one person who  no longer wants to  receive the group notices, and I have completely removed her name and contact information from my address book, but when I type the group name in my "To" box her name still appears.  She has  a "hotmail" account, as do several other members of my group.  Is there anything else I can do, short of trying to remember to delete her name every time I send an e mail to this group?  

    When you get hold of one of those first line reps on the phone, it depends very much on just who happened to answer the call.  Some of them are very good.  Others not so much.  The only reason I found out about the memory for the To: line is that another poster had asked about it and I contacted Plaxo about it.  There was an exchange of emails and they explained how the thing works.
    Do you see "Forget" to the right of the first 3 o 4 names when that list comes up?  I had no idea what that was for.  It is the automated sorting software that the mail program uses to determine what addresses you use most often when typing in a given letter/word combination into the To: field.  It then ranks them in that order.  If you want it to change you click on Forget and it should remove it from the spot in the list.  At least that's what was explained to me.  But when I first asked them about it they tried to tell me it was something to do with my browser, which it is not.  So I sent them  a screen shot of it and then they said "oh wait----yeah------that thingy", and then gave me the correct information.
    They don't all know all the features of the mail  program or address book.

Maybe you are looking for

  • How to Down load Data in Application server into the Internal Table

    hi freinds, iam having a file in the application server. now i need to send the data in the file to the internal table. is there any Function Module? i need with out using the OPEN DATA SET and CLOSE DATA SET Keywords. is there any possible? Regard's

  • Second Display flashing on and off randomly

    Since upgrading to Lion, my second display (ViewSonic VX2235wm) flashes on and off frequently. There doesn't seem to be any pattern to it. Has anyone else experienced this behavior? This problem is with a second display hooked to my 2.4 GHz Core 2 Du

  • Texts in pdf form don't appear when viewing in Acrobat nor in Reader.

    Texts in pdf form don't appear when viewing in Acrobat nor in Reader nor when printed after the form has been filled. But the texts appear when one clicks inside the field. What is the solution to be able to print and view all of the texts in all of

  • Transporting table and table maintainance generator

    Hi, Can i transport the table and table maintainace generator and function group of the table with in single request or not. One more thing is when i transport the table maintainance generator,will the entries also be transport to another system or n

  • Control Simulation and Design with DAQmx

    Hi all, thanks in advance for any helpful direction you can provide. I was recently setup with Labview 2013 Developer Suite and the Control and Simulation Design add-on and was hoping to get a little nudge in the right direction. I have used Labview