Nokia C7 Maps - Automatically connects to Service ...

Hi,
When I load the maps software on my C7, I get a message on the top left corner of the phone saying 'Connecting to (service providers name)'. Now because of this, I am being charged by my telecom service provider for using maps. How do I set my map software to use the 'free' satellite GPS? I am travelling abroad after 3 days and would not want to be charged by my new service provider. Please help...
Thanks & cheers
Rishi
Solved!
Go to Solution.

@rishi235
Welcome to the forum!
In addition to OVI Maps application needing to be "Offline" go to Menu > Settings > Application settings > Positioning > Positioning methods - disable all except Integrated GPS, although it can take a while longer to establish position without benefit of Assisted GPS positional method.
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

Nokia Suite: Can't connect to Service (Nokia C5-05...

I updated Nokia Suite with the new version 3.4.49 recently and after that I am not able to install any app from Nokia Ovi store. Whenever I click "Download via PC", the Nokia Suite gives the error "Can't connect to service".
Please refer to the attached image.
How to resolve the issue?
Attachments:
NokiaSuiteError.png ‏11 KB

Copied from a member of the Nokia Developer Team. It worked for me.
"This problem can be also because of expired certificates that you have on your computer.
To remove the problematic certificates, do the following:
On your computer, open Control Panel and click Internet Options.
In the Internet Properties window, select the Content tab, and click Certificates.
In the Certificates window, select the Trusted Root Certification Authorities tab.
To sort the certificates, click the Expiration Date column header.
Select any GTE CyberTrust certificates that have their expiration date in the past. You should be left with one GTE CyberTrust certificate that is valid.
Click Remove and, when asked for confirmation, click Yes.
After the expired certificates have been removed, please restart Nokia Suite and try signing into your Nokia account again"
Good luck!

Insert ATT sim card in Iphone 5 = automatically connects to cellular service?

Hi folks,
I just bought an unlocked Iphone 5 a few weeks ago. I'm using it perfectly except I don't have a nano sim inserted. I have AT&T. I had a Samsung before buying the Iphone 5 and I blocked the internet access through cellular service on the Samsung. I was wondering if I buy a nano sim (using my old number) and insert it in my Iphone 5, would it automatically register me to a data plan? Would it automatically connects to the internet through cellular service even though I've never signed up for it? Yes I only want to use the Wifi on my Iphone. I do not want to pay extra money for the data plan. Keep in mind that my Iphone is unlocked already. I heard my friends saying that if you use an ATT sim on an Iphone, it will force you to use internet through the cellular service. Is that true?
Thank you for reading my question.

That is true, AT&T does not allow the use of smartphones without a data plan on their network. Unlocking has nothing to do with this and I'm wondering why someone would pay that much money for a phone they are not going to use.

Nokia E5 - Automatic Connection to BT Wifi / Fon /...

I have a Nokia E5.
I often connect to the internet on it using BT Wifi / Fon / Openzone connections. These require me to enter login and password details into a webpage and submit every time.
Is there a way I can configure a connection to automatically log me in when in a connection zone?
// Have tried Menu > Control Panel > Settings > Connection > Destinations and adding a new access point then configuring manually EAP plug-in settings. I think this should work if I knew what the right settings were and had / knew which was the appropriate authority certificate //
Has anyone managed to get this working with bt wifi?

Good question. Difficult to answer. I tried hard and could not find any EAP support in the UK, one-and-a-half years ago.
Ask one of your acquaintances with an Android device to install the free Wifi Analyzer. Within that tool, please, go to Settings (wrench icon) » Show full securities and tick that. Then go back and have a look at your Wi-Fis. If its states [WPA2-EAP-CCMP][ESS], you have found a base station (ESS) which does EAP in WPA2 with AES/CCMP encryption.
Unfortunately this way, you cannot determine which outer EAP tunnel type and which inner EAP tunnel type is/are used. Therefore, have a look at the documentation of the provider of that base station. There are rumors FON does EAP-SIM, however, I have not found a single spot, yet.
Beside EAP, sometimes it is possible to dissamble the HTML form and create a hyperlink (URL) which contains the paramaters already. If you use that URL as default page, you are logged in automatically. Again, I never tried to made up such a URL myself and did not find one either.
Nevertheless for FON, they provided the FON WiFi Connection Manager for Nokia Phones. However, I never used it. Devicescape’s Easy Wi-Fi in version 3?

Nokia 5800 automatic connection with a bluettoth d...

i want my nokia 5800 with open BT to automatically connects to my car bluetooth without doing anything.
because i enter and exit the car a lot
How can i do it this ???? with an application maybe ????
thanks !!!

hi mate,
have you checked via the settings of the 5800 and your car head unit's Bluetooth that it pairs automatically? my mother has a Nokia 2690 and it pairs up automatically with the car head unit's Bluetooth capabilities as soon as she starts the engine.

My Nokia X2 automatically connect to internet

My Nokia X2 automatically connect to internet,I think it happens because of loaded facebook nd whatsapp application in it,how to off the automatically connection to the internet.

you will need to delete the access points.
menu-> settings-> configuration-> preffered accesspoint-delete.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Nokia OVI Maps - Free Navigation

Nokia OVI Maps - Free Navigation
Mobile navigation for everyone, the Ovi Maps takes you where you want to be and shows you what you want see, with navigable maps for over 70 countries worldwide. All this with only one click. And it's all free.
- Free Drive navigation
- Free Walk navigation
- Free maps and map updates
- Free Events guides
- Free Lonely Planet guides
- Free Michelin guides
You thought Garmin and TomTom were in trouble when Google announced its free Navigation service? Wait until investors hear Nokia's news.
Reuters is reporting that Nokia will offer free navigation on its smartphones. However, instead of just the US (the current Google limitation sans hacking), Nokia will be demonstrating its reach by offering free turn-by-turn directions in 74 countries and 46 languages - a move that should cover 20 million smartphones globally with Ovi Maps available in over 180 countries.
Update: The original San Francisco Chronicle report has been pulled but Google cache caught a bit more saying that Nokia's navigation service is "capable of operating completely offline" unlike Google Navigation which requires data connectivity.
Update 2: Nokia just made the download link live. Hey, where's the N97 and N900.
Update 3: And it's official. Starting today, Ovi Maps walk and drive navigation is free across the globe. Drivers receive turn-by-turn voice guidance including lane assistance, traffic information (in 10 countries including the US), and safety camera and speed warnings while pedestrians will be guided on shortcuts through parks and pedestrian-only zones in over 100 cities across the globe. It all works offline too, which should extend battery life and keep that navigation humming even while puttering about in data dead zones without racking up international roaming charges (take that, Google). From March 2010, all new Nokia GPS enabled smartphones will come installed with the new Ovi Maps application and pre-loaded with local country map data and walk and drive navigation with access to location-aware Lonely Planet and Michelin travel guides at no extra cost. Additional premium guides like a weather service and events / movies are also included. Just 10 devices from Nokia's massive catalog are available today a list that includes the N97 Mini, 5800 XpressMusic, 5800 navigation edition, E52, E55, E72, 5230, 6710 navigator, 6730 classic and X6.
Click here to get buckled up !
- http://maps.nokia.com/explore-services/ovi-maps/ovi-maps-main
Download the offline SIS installation
- http://www.1filesharing.com/download/FBWAYFO7/Nokia%20OVI%20Maps%20-%20Free%20Navigation%20Edition.r...
I'm an Xploit - Please feel free to post your issues, feedbacks in this discussion forum and I'll do my level best to help, otherwise my knowledged friends whom are around willing to help you. Thank you !

mmm ... i just update my device, uh .. so bad im late .. btw, the new maps is great..
I have
- voice guidance
- 4 usual country maps installed
- the POI's good
- languages are good
btw, mine has offline download and instructions too
thnx mates
I'm an Xploit - Please feel free to post your issues, feedbacks in this discussion forum and I'll do my level best to help, otherwise my knowledged friends whom are around willing to help you. Thank you !

N8 Automatically Connects to the internet.

Hi,
My new Nokia N8 automatically connects to the internet. When I open applications that need internet connection it connects without asking. For example if I open Ovi Maps, SW update, or games that use the internet it automatically connects without asking me.
I am using PR 1.2 with the following settings:
Data Use in home Network: Always Ask
Data use when abroad: Always Ask
It never asks me it just connects. This is using my data.
Thanks

When you first set up N8 did you sign in to Nokia account or did it time out and you chose "Later"
I chose later
Presumably if you go to Menu > Settings > Connectivity > Settings > Destinations > Internet - network access point = Priority1?
My wireless network is number 1. When im not near my wirless network other applications (such as games) automaticly use data.
Try opening your browser > Options > Settings > General > Access point - change to "Ask when needed" and see if makes any difference.
That is the option that I selected. It asks me when I open the browser only. Not other apps.
In OVI Maps top right of screen does it say "Accounts" or "Hello username" tap on this > Nokia account - does it say "sign in" or "sign out"?
"Accounts", "Sign in"
I found an example of this:
http://www.youtube.com/watch?v=OOro3mowj1Q
At 11 Seconds "Network Connection" pops up. On my phone it does not. It just connects. Its not just ovi maps its everything.

Bluetooth keeps automatically connecting even afte...

does anyone know the name of the process/service that runs which tries to keep automatically connecting to my phone even when I completely close down Nokia Pc Suite?
I'm using the latest version, 7.1 believe
Thanks

Yes that is correct, I close down all icons/programs to do with PC Suite, and it still tries to connect
I manually disconnect from within my phone's menu, and it still forces the bluetooth connection shortly after
It does not force this connection until I start PC Suite

Old Nokia 7610 Supernova always connected email

Is there a way that allows Nokia 7610 Supernova (or all other phones with the same firmware) to use ALWAYS CONNECTED email such as Gmail and not to terminate the connection after 10-15 mins........... pls help!

Hi velizarcho12345,
You need to configure the Internet settings on your phone. To define how to use the service, select Menu > Settings > Connectivity > Packet data > Packet data conn. and from the following options select Always online so that it will automatically connect to a packet data network when you switch the phone on. This also applies to phone applications that require Internet connection like email.

Automatic creation of Service Arrangements in SAP CRM 2007

Dear all
we're using SAP CRM Resource Planning with HCM integration, so get the Employee Master and requried Availability Info Types replicated from HCM via ALE.
Unfortunately, between the creation of an Employee and the Time Distribution, a Service Arrangement must be created manually. As both the HCM-side steps are executed automatically as background job, we are trying to find a way to also create Service Arrangements automatically. We do not need to maintain any data other than ID and Name for the Service Arrangement in the first place.
Can you point me to a way to do this - eventually a function module that would be available for this purpose?
Many thanks in advance!
Christian

Hi Christian,
You need to do customization settings for automatic creation of Service Assignments. And for the same you need to do all these settings according to the SAP Help Document.
You can have a look at the flow of the Service Assignment from the link below
http://help.sap.com/saphelp_crm40/helpdata/en/c6/c14769c3fc814fbe3e5df8edcba791/frameset.htm
You need to do the customizations from the sap help document. You can have a look from this link:
http://help.sap.com/saphelp_crm40/helpdata/en/c6/c14769c3fc814fbe3e5df8edcba791/frameset.htm
Technical Information : As Assignment functionality is based on WFM Core, there are some BadI's exposed. You can implement them to achieve your functionality.
Badi : CRM_SRV_SDL
Implementation                                                     Purpose
CRM_SRV_SDL_WFM                                         R/3 connection to the WFM Core
CRM_SRV_SDL_RFC                                          TCP/IP connection to the SAP Business Connector when using the external   Scheduling Engine of a third party vendor.
In our development scenario, we have used the BadI's CRM_SRV_SDL to achieve the functionality.
Hope this helps.
Thanks,
Samantak.
Edited by: Samantak Chatterjee on Sep 11, 2009 9:43 AM

EDGE automatically connects and i don't know why.

I've just seen my data usage on my carrier webpage and i've discovered that EDGE automatically connects even if i don't use any internet-required application (maps, safari ecc.)
I just would like to know....why? Why should EDGE be always activated? I mean....could it activate itself only if i use an app that requires internet and then unactivate when i push the home button?

Mail checking is set to manually....and i don't have visual voicemail. I live in italy and i use TIM (which is the future and current carrier for the iPhone in Italy, current becouse since 1.1.2 TIM is inside the iPhone (under carriers), infact i don't have EDGE under Settings/Network). I have a data plan but it's limited to 600min a mounth.
So why does EDGE automatically connects?
My iPhone is unlocked: not activated by iTunes, nor jailbroken. But it's just activated.
Message was edited by: Marco

X6 not automatically connecting to in-built hands ...

Hi, has anyone else had the problem where the phone won't automatically connect to the inbuilt hands free kit? We have a Kluger KX-S - our previous phone Nokia 6300 had no problems whats so ever - any ideas? thanks

You need to set the handsfree as authorised. To do so,
Goto Settings>Connectivity>Bluetooth>Toggle right to paired devices>Select hands free from list>Options>Set as authorised

[E7] Automatic connections to the internet

My E7 is connecting to the internet in regular intervals, although there should be no appearent reason. I am trying to keep all outgoing data connections to a necessary minimum, mainly to maximize the device's standby time. However, I cannot get rid of some automatic connections, thus I have no idea what processes or applications actually trigger them.
My device is set with the following configuration:
- RSS reader widgets are all removed
- RSS feeds seem to stay offline according to the update timestamp shown with each feed
- Widgets are set to offline
- Social 1.3b is installed, but does not seem to update status since only older status messages are shown
- mail synchronization is set to manual for all accounts
- Nokia situation beta was installed, but removed
- Skype, Nimbuzz and IM+ are installed, but not running
- WLAN monitoring is off
I have a couple of third-party applications installed as well of which none should be running. Is there any way to monitor the outgoing data connections? I.e. which applications are responsible?
Any hints are appreciated.
Robert

Here is the full official FAQ about this, it seems that there are some things in it which have not already been tested here:
Your Symbian^3 device establishes a WLAN connection automatically if there is an application requesting access to the network and you are under the coverage of a WLAN network which is defined in the destination settings of the device.
Usually the applications are connecting through the default Internet destination group. To see what access points you have in this group, select Menu > Settings > Connectivity > Settings > Destinations > Internet (or some other group, if it has been selected as the default destination).
If the destination group contains both WLAN and cellular access points, the switching between the access points can be controlled with the Menu > Settings > Connectivity > Settings > Switch to WLAN setting:
Select Known WLANs only to switch from cellular connection to WLAN connection immediately when the WLAN access point in the destination group is found. You can in this way save in the data costs that may be associated with the cellular data connection.
Select Manual to disable the automatic switching of currently active connection. WLAN access is established only if the user manually takes a WLAN connection in use or after the active cellular network connection is disconnected. Note that the WLAN connection is established automatically in this situation if a new connection is requested and the WLAN access point is the highest priority access point in the destination group.
If you don't want the WLAN connection to be automatically established, you can remove the WLAN access points from the default destination group:
Select Menu > Settings > Connectivity > Settings > Destinations > Internet.
Long press the WLAN access point in the list and select Delete or Move to other dest. (if the access point is in use and cannot be edited, switch the device first to Offline profile).
After removing the WLAN access points from the default destination group, the network connection will be established via the cellular connection (if defined in the destination group).
To prevent the automatic data connections to both cellular and WLAN networks, you can disable the automatic connections in the application settings. Depending on the application, this can be done e.g. in the following way:
Home screen widgets: Select Options > Widgets to offline mode.
Email: Select Menu > Applications > Mail > Settings and select Manual or a suitably long retrieval frequency in Retrieval frequency or Sync frequency settings.
Note that any applications running in the background may trigger the network connections to be established. Long press the Menu button to see the currently active applications.
If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

BI content -- Transfer rules are not mapping automatically

Have any one come across with this issue.
We have connected R/3 system to multiple BI systems.
Eg: we have 1 ECC6 & 2 BI systems.
Business Scenario is .
I have two different Companyu2019s A & B in two different Network Domains ( Domain 1 & Domain2 ).
u201C A u201C Have Ecc6 & BI in the Network Domain1
u201C B u201C Have ECC6 & BI in the Network Domain2.
With in the Individual Domain ECC6 & BI is working Fine.
Issue : -
When I connected Company u201C A u201C Ecc6 ( Domain1 ) to Company u201C B u201C BI system ( Domain2 ).
The connection is showing OK.
Replication is also OK,
But BI content installation have issue, Transfer rules are not mapping automatically with Standard Data sources ( Eg: 0HR_PA_0 ).
Thanks in Advanceu2026
@Shaik...
Pls this is critical issue ... Basis people is saying this is not the issue of Basis..Connection is OK ...SO . it is the issue of BI only.
any one Advice me ....
Edited by: shaik on Aug 24, 2008 5:39 PM

Hi Raghavendra,
Thanks for Replay,
Can you explain me how to check the data mart Connection ?
what i am doing is ....
step 1: Connection is OK.
step 2 : Replication is OK.
step 3 : I am going to Install BC Infosource ( Eg: 0HR_PA_1 )
Grouping -
In data flow before.
source system -
i check the Ecc6 system which is in different domain.
then i drag the infosource ..... the transfer rules are not mapping ( Not coming )
pls Advice....
@ SHAIK...
Edited by: shaik on Aug 27, 2008 12:41 PM

Nokia C7 Maps - Automatically connects to Service ...

Similar Messages

Maybe you are looking for