Nokia C7 Outgoing calls - "No Answer" problem

Hi,
I am facing a problem with my C7 phone. Whenever I try to make outgoing calls from my phone, it gets automatically disconnected and displays the message 'No Answer'. Have tried so many things but have not been able to find a solution for the same. Even hard reset has provided temporary relief to other users having the same problem. Please help. Hoping for a solution.

I've also faced the problem occasionally with the phone snapping the call quickly with the no answer display... My sim card is almost seven years old...
blitZkid
Nokia C7: Running on Nokia Belle
"If I'm helpful in anyway, a click of appreciation on the star would be nice"

Similar Messages

  • My iphone 4 squeals when i make an outgoing call or answer an incoming call.  if i put it on spkr phone...the squealing stops

    My iphone 4 squeals when i make an outgoing call or answer an incoming call thru the handset....if i switch to spkr...the squealing stops....any ideas??

    I am having the same problem. Squeal with handset calls, no squeal with bluetooth in the car or on speaker phone. Some calls have no squeal, but then I can hear the person on the other end, but they cannot hear me. Has anyone come up with a solution? I am going to reset to factory settings and see if that helps.

  • Nokia 6290 video calling and bluetooth problem

    I recently bouight a nokia 6290
    however when I tray and set up a video call it says not support by network
    any ideas how to sort the problem? also when I try and pair up with a friends bluetooth it wont let me pair up with one and it will except the other any ideas?

    Are you on a 3G network ? Video call only works when both parties are on a 3G network with a 3G signal.
    Knowledge should be your Advisor when you need help.
    1610»2110»8110»5110»3310»6210»7250i»6220»6230»6230i»6233
    Love me or hate me, its still an obsession. Love me or hate me, that is the question. If you love me then Thank you! If you hate me then ...

  • How to enable vibration when an Outgoing call is a...

    How to enable vibration when an Outgoing call is answered.
    Any chance Nokia can update the device with such feature i used to have it on my HTC HD7 really good 

    Hi Bakkal,
    Welcome to the forum!
    May we know the model of your device? We appreciate your feedback; however, this feature is not present on Nokia devices. If you're using a Nokia Lumia phone, you can post your suggestion here: 
    http://windowsphone.uservoice.com/forums/101801-feature-suggestions
    Let us know if you have another concern. Hope this helps.

  • Not able to make outgoing calls in iphone4. Regularly i face this problem, at the same time i receive incoming call, can do net surfing, can access email and sms, only outgoing calls get failed every time. please answer to solve this problem

    not able to make outgoing calls in iphone4. Regularly i face this problem, at the same time i receive incoming call, can do net surfing, can access email and sms, only outgoing calls get failed every time. please answer to solve this problem

    Good day Sidharth Namrta,
    It sounds like you are unable to make any calls, but you can recieve them, and everything else seems to work fine. I recommend you use the troubleshooting in the following article to help you get that resolved, named:
    iPhone: Troubleshooting issues making or receiving calls
    Follow the steps below to resolve this issue. Please test after each step.
    Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
    Check your phone settings:
    Check your Do Not Disturb settings: Tap Settings > Do Not Disturb.
    Check for any blocked phone numbers: Tap Settings > Phone > Blocked.
    See if Call Forwarding is turned on: Tap Settings > Phone > Call Forwarding.
    Ensure that your software is up to date:
    Check for a carrier settings update.
    Check for an iOS software update. 
    Note: Some updates may require a Wi-Fi connection.
    If the iPhone has a SIM card, reseat the SIM card.
    If the iPhone 4 or iPhone 4s is on the Verizon network, dial *228 from the iPhone and select option 2 to update the Preferred Roaming List (PRL). The PRL determines the cellular towers the phone uses for cellular service, selecting those with the best signal strength.
    Reset the network settings: Tap  Settings > General > Reset > Reset Network Settings.
    Try to make or receive calls in another location.
    Attempt to isolate to one network band:
    If you're having the issue on LTE, disable LTE, if possible, and try again.
    If you're having the issue on 3G/4G, disable 3G/4G, if possible, and try again.
    Contact the carrier to check the following:
    Your account is properly configured to use the specific iPhone that has the issue.
    There are no localized service outages.
    Your account doesn't have a billing-related block.
    Your calls don't have errors on the carrier system.
    Restore the phone as new.
    If the above steps don't resolve the issue, go to an Apple Retail Store, carrier, Apple Authorized Reseller, or contact AppleCare to send the phone in for service.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • I am not able to make outgoing call from my Nokia ...

    Hi,
    Today I observed one weird thing, I am not able to make any outgoing call from my Nokia C7 with Vodafone Sim inside it. After sometime I put some other card and It started working fine. I thought the problem is with Sim hence I put my Vodafone Sim in other phone and It also worked fine.
    Whenever I am trying to make call from Nokia C7 with old Vodafone Sim it gives error "NO ANSWER".
    But I dont understand that why Nokia C7 is not working with Vodafone Sim which was inside it since I purchased the phone.
    Please help as Vodafone customer care has nothing to do as Sim is working fine with other phones.
    Regards,
    Firoz Shaikh

    Have you accidently changed any settings?
    try factory reset the phone and try again
    type in *#7780# and enter 12345 if asked for a code
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • E7 Problem with outgoing calls

    Hi, I own the E7 for the last 5 months or so, but since 1 month after purchase, my phone's outgoing calls switched off completely and even after the normal tries of restarting the phone etc. it didn't turn on again. It does not go through at all and says no answer. However, I could send sms, receive calls and also access the internet. I checked with vodafone and they confirmed that there was no problem from their side and all bills payments were received by them on time.
    So I decided to replace the SIM with my friend's SIM and use the phone. Surprisingly, the outgoing calls were on. After that I again put my old SIM back into the phone and the outgoing calls started working fine. The problem now is that this turning off of the outgoing calls is happening too frequently.
    I asked Nokia care to look into this and they did nothing but reloaded the software, but this was of no avail. Couple of days back, I got the phone upgraded to Symbian anna. However this problem is still not solved and is frequent as before.
    Can anyone help me understand what the real problem might be? And what is the right solution?

    hi
    sometimes, E7 does not like old sim cards or sim cards with specific configuration, or cards with some minor scratches from frequently changing phones.
    try changing the sim card.
    there could also be a mechanical problem in the sim slot which can and will be overlooked by our dear nokia care liners.

  • SPA8000 Problem with outgoing calls from trunk

    Hi all,
    I have SPA8000 with the latest firmware 6.1.12.
    Tried the first time to configure the trunk groups. With incoming calls it caused no problems. But with the outgoing calls cannot solve the problem:
    When dialing, the SPA8000 try found number to itself.
    Port 8 in trunk group 1.
    10.120.0.67 - ip of SPA8000.
    172.17.1.1 - ip of PBX
    302 - number of trunk.
    444 - other number on PBX.
    INVITE sip:[email protected]:6060 SIP/2.0
    Via: SIP/2.0/UDP 10.120.0.67:5361;branch=z9hG4bK-e9bbff35
    From: <sip:[email protected]>;tag=1e668866b76f0b0do1
    To: <sip:[email protected]>
    Remote-Party-ID: <sip:[email protected]:6060>;screen=yes;party=calling
    Call-ID: [email protected]
    CSeq: 101 INVITE
    Max-Forwards: 70
    Contact: <sip:[email protected]:5361>
    Expires: 240
    User-Agent: Linksys/SPA8000-6.1.12
    Allow-Events: talk, hold, conference
    Content-Length: 202
    Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
    Supported: x-sipura, replaces
    Content-Type: application/sdp
    v=0
    o=- 13756 13756 IN IP4 10.120.0.67
    s=-
    c=IN IP4 10.120.0.67
    t=0 0
    m=audio 19469 RTP/AVP 8 101
    a=rtpmap:8 PCMA/8000
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-15
    a=ptime:30
    a=sendrecv
    SIP/2.0 404 Not Found
    To: <sip:[email protected]>;tag=63d33124-0
    From: <sip:[email protected]>;tag=1e668866b76f0b0do1
    Call-ID: [email protected]
    CSeq: 101 INVITE
    Via: SIP/2.0/UDP 10.120.0.67:5361;branch=z9hG4bK-e9bbff35
    Server: Linksys/SPA8000-6.1.12
    Allow-Events: talk, hold, conference
    Content-Length: 0
    What is wrong? What must I do to outgoing call?
    Screenshots of configuration:

    Hey!
    Thank u soo much ana_bidi! It worked and my phone is back to life
    I even sent an email to Nokia and I got the weirdest reply ever! They were telling me to check if my sim was inserted correctly I was like whaaaat? And I did mention to them that I can receive calls and send/recieve SMS! I seriously don't know what made them suggest that thing
    Anyways thanks again for the solution!
    Have a great day! 
    Walid Shaaya

  • IPhone 4s 6.1.3 problems with 3g,In and Outgoing Calls

    Hi Everybody!
    I got a factory unlocked (originally was Vodafon locked) iPhone 4s with firmware 6.1.3.When I insert my sim (Hungarian Telenor) when only EDGE is on it founds the signal and seems like everything is working.After a few hours or sometimes even a day passes by a phone stays on full signal with Carrier logo and Edge on, but my friends reporting that they cant call me(like im offline) and i cant make calls either.The interresting stuff is that the Edge connection is fully working during that im offline for my friends via Calls and i can send and recieve imessages and viber messages.
    When i switch 3g on it disconnects from service drops the EDGE and never finds the way back and stays 'searching' or 'no service' at all..
    I thought that its my Carrier's fault so i went to spoke with them and tried 5different micro Sims( cause i wrote that 4s-s are sensitive to SIM card types).. this thing not worked either,
    Then i tried the phone with a T-mobile SIM card.. it does the same..connects to the services,but with 3g switched on not finding service..so totally like with my sim.
    Here Comes the bumm... i Tried the phone with vodafone sim and everything works.. simple connectivity to 3g with full internet usage,can make and recieve calls...I spoked with all of the Carriers and also Apple and no body can give me nothing..the phone is off varranty so changed to a new one isnt an option..
    Anybody? Something? im beginning to give up .. please help if you can..Thanks!!
    ps.:i restored over 20times,reset network settings,switch off and on automatic setting time.. every little possible things that people wrote on forums before..

    neverstop wrote:
    1. Settings > General > About - Carrier sais Carrier 14.0 when i restore and startup with my Telenor  sim.. ..
    1. In order
    2. ...... everyone is pointing on the other and i cant do anything about it..just the whole 3g/call failed stuff is bothering me...
    2. It appears configuration issue. I use three iPhones (in my family) on four unsupported carriers. Never had any problem except on one. Outgoing calles to one particular party failed. Set right by Carrier.
    3. Is there something like the Unlock process was not fully succesfull...
    3. Never heard. It is digital : Yes or No. In the instant case, unlock is successful.
    Download firmware afresh via iTunes or from here iPhone4,1_6.1.3_10B329_Restore.ipsw
    and save. Insert Telenor SIM in the iPhone. Backup. Option+Restore (Mac) Shift+Restore (PC) pointing to saved firmware. Reject Carrier updates, if any offered by iTunes. Setup as New.
    Observe.

  • Thank you for providing immediate  feedback.   bt that solution did not help me to solve the problem.still am nt able to make outgoing calls. i dont find any problem in recieving calls also right. bt i dont have any problem in recieving calls.

    Thank you for providing immediate  feedback.   bt that solution did not help me to solve the problem.still am nt able to make outgoing calls. i dont find any problem in recieving calls also right. then i dont what is wrong with my iphone.The same sim which i used in iphone4s is working in all other phones.its not the problm of carrier.
    Iphone 4s Black 16gb

    Rather than starting a new thread every time it would be easier to follow you if you stick to the one thread

  • I have problems with outgoing call no audio, only works with speaker. I bought my iphone on december 2011.

    I have problems with outgoing call no audio, only works with speaker. I bought my iphone on december 2011.

    Had the same problem, no audio on incoming or outgoing calls and only could hear the conversation of the call if I put on speaker. It seemed to start after I did a recent IOS update this past month. I tried restart, reset and restore of my iPhone but nothing changed. It appears not to be a software issue but a hardware problem. I got my phone this past summer so it was still under warranty and got it replaced.

  • When I make an outgoing call the recipient cannot hear me very well as though the volume was turned down very low. However when I activate the speakerphone the recipient can hear me loud and clear. I transferred my SIM Card into a new device Same problem

    When I make an outgoing call the recipient cannot hear me very well as though the volume was turned down very low. However when I activate the speakerphone the recipient can hear me loud and clear. I transferred my SIM Card into a new device only to be subjected to the exact same problem. I have reset the phone clearing all the data and updated to the most recent software version available from itunes; and still no improvements. The results of my switching to a new phone would indicate a software issue.
    Does anyone out there have this problem and how can it be fixed?
    Thanks,
    Teresa

    Try removing the screen protector that is covering the microphone.
    Scratch that; wrong answer. I thought you meant you had trouble hearing.

  • Hello apple I have the problem with my iPhone and my friends have this problem too. My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it bu

    Hello apple
    I have the problem with my iPhone and my friends have this problem too.
    My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it but when answer both of us can't hear anything and when I put my iPhone to my face the screen is still on and when I quit the phone application and open it again it will automatic call my recent call. And when my friends call me my iPhone didn't show anything even the missed call I'm only know that I missed the call from messages from carrier. Please check these problem I restored my iPhone for 4 time now in this week. I lived in Hatyai, Songkhla,Thailand and many people in my city have this problem.
    Who have this problem??

    Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

  • Problems with outgoing calls after update

    I have an iPhone 5. Since I've updated it to iOS8, I can't make outgoing calls in any way, shape, or form. If I dial the number and press the call button, nothing happens. If I click on the contact from my call log, nothing happens either. Someone help me please!!

    Hi there hwelch3,
    I would recommend taking a look at the troubleshooting steps found in the article below. 
    iPhone: Troubleshooting issues making or receiving calls 
    -Griff W.

  • Why does my iPhone 4s beep when answering incoming calls or placing an outgoing call?  How do I turn it off?

    Starting today my iPhone 4s now beeps when I am making an outgoing call or when I receive an incoming call.  I am wondering if this is due to the recent upgrade to 7.0.4.  My phone is on Verizon.  Does anyone know how to turn this beep off?

    This is a new feature of iOS 8 ... go to your iPhone's FaceTime settings and turn off "iPhone Cellular Calls".

Maybe you are looking for

  • Problems with GUIXT statement TEXT with parameters

    Hi, i use guixt with DLOGON.TXT for logon-dynpro. In the docu i find, that it's possible to use some parameters for the statement TEXT. These parameters are: -border, -intensified, -fixedfont and Size="n" . I try to use them, but i get always error.

  • Query to find out empty records

    Hi experts, I want to find out those tables in my databases which does not have any records or data. I have many tables in my databases which are totally empty. Please help me to build a query . Which database view i should access to find out the tab

  • How to make BEX analyzer work in ALV?

    Hai, As we have an export button on alv, it has 2 options  : EXCEL & Bex Analyzer. Export to excel is working fine, but Bex is showing a dump as follows: The following error text was processed in the system ECD : You can only work in client 000 The e

  • Zenworks and windows 7 policies

    We are running Zenworks v10 with all the updates. We are trying to create a lock-down policy for our users. When I log in to the ZCM using a windows 7 box I can configure all the policies okay and they work. The issue is when I log into the system as

  • Border around page messing up my ruler

    Hi, I'm trying to use the ruler for exact placement of fields on the screen so that they print in the exact location on the form.  I can't because there is some kind of border around the page that impacts my ruler measurements.  Is there a way tell t