Nokia Car Kit Nokia MBC 15S chanfe for 6220 phone

I have a Nokia car kit fitted with a Nokia MBC 15S cradle which fits my old phone Nokia 6230i is it possible to fit a new cradle for my new phone Nokia 6220 or do I have to replace the whole kit incliding all the cables?
Any help greatly appreciated.
Steve

Hi davehsuperstar
You might like to look at installation guide here to give you an idea whether the CA-27 Data cable runs to the CK-7W:http://nds1.nokia.com/files/support/apac/phones/guides/Nokia_CK-7W_APAC_UG_en.pdf
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

  • :S :S Nokia 6120C - new firmware for my phone?! !?

    Hi,
    I have Nokia 6120 Classic, Product ID: 0555926 and last firmware for my phone is: v 3.83
    But for other 6120 phones last firmware version is: 5.11, 4.21 ...
    When we get new firmware for 0555926 product id phones???????? This is discrimination...
    Thanks and sorry for my english ..
    Message Edited by bavarac on 14-Jul-2008 01:30 AM

    If the nokia software updater doesn't allow you to update then your phone is most likely network branded or network locked. Most networks don't bother approving new updates leaving their customers stuck with old firmware.
    If your phone isn't network locked see this faq for more info: http://europe.nokia.com/A4577229#faq35
    Message Edited by psychomania on 14-Jul-2008 08:25 AM

  • Nokia Car Kit compatibility

    I have just updated from a 6610i to a 6230i and was told by my service provider that the new phone was comatible with my 12 month old car kit.
    When I received the new phone I had the error message "enhancement not supported" when I phoned my service provider I was informed that a CA55 cable would do the trick. I contacted Nokia before buying the cable and was told this cable would not work, in fact there was not any other phone that would work with the phone kit I have. I feel a bit agreived that the car kit is now rendered useless, having had it for only 12 months.
    Check with the phone provider about compatibility before changing your phone rather than rely on your service providers information.....

    I assumed, but shouldn't have, that because I had the kit fitted at a reputable auto electricians, that because the phone holster was a Nokia that the rest of the kit would also be Nokia. When I removed the main box of the kit I found that it was not a Nokia part. I have now got a proper Nokia kit and this works fine, although not bluetooth I got it at a good price, so it should be good for 12 months till my next upgrade. Next time I'll not assume!!!!

  • Existing Nokia Car Kit MCC4 & N95 8GB phone

    Hi,
    I've bought a car with embedded Nokia Car Kit MCC4, which was designed for old Nokia 3310 & 3330 phones. I have Nokia N958GB.
    Can I use the existing connectors (with adequate adapters of course) and expect that I can use the car kit as expected?
    I was planing to use existing wires and make some changes:
    1. HOLDER: replace the phone holder with one taht fits my new phone
    2. CHARGER: plug in charger adapter to fit new standard
    3. AUDIO: plug in 2,5mm female to 3,5mm male stereao audio jack adapter
    Thanks.

    Thanks for you interest. I'll inform you abaout all I discover about this little hack.
    For now, I have difficulties to find the audio cable adapter in my country (prety rare in Serbia).
    This is it:
    http://www.amazon.com/Female-Adapter-Accessories-Electronics-Computers/dp/B000RHMO96
    or:
    http://www.tangshop.com/35mm-to-25mm-adapter.html
    Leastways I'll make that adapter by hand, or combine few elements to derive the wishing one
    Best regards,
    Vladimir Stefanovic

  • Car kit for N73

    I have a Motorola bluetooth car kit which worked perfectly with my motorola phone, but I have real problems using it with my N73. I have to connect it manually ever time I get in the car and even then it doesn't work sometimes.
    Can anyone recommend a bluetooth car kit that definitely works with the N73. I don't want to buy another one only to find it won't work either. From what I've read, the N73 can be fussy when it comes to bluetooth.
    Thanks.

    You might be better off asking this question on the accessories board - there may even be an answer on there already.

  • Car kit automatic A2DP connection

    I'm not entirely sure if this is a problem on my phone, or with the car kit, but I figured if I post on both ends, someone might know the answer.
    With my N95 and N97, as soon as I turn on my car (equipped with Nokia CK-100), I automatically get connected to BT HFP and A2DP profiles.  The car kit will tell me, "Phone connected."  A second later, "Player connected."  With the N8, the car kit will only connect to just the phone automatically.  For the player to connect while the car is on, I have to open up the music player and play a song, which will then force N8 to make the A2DP connection.  So when that happens, you hear a 1.5 second message saying, "Player connected" followed by music that is already 2 to 3 seconds into the song.  I thought it was perhaps the Car Kit getting full with the list of paired devices (memory is for 8 pairings), but clearing the list doesn't help.  I thought it was the Car Kit firmware, so I upgraded it to 4.401, no luck.  Then when I paired my old N97 and N95, both HFP and A2DP connections were made automatically when I boot up my car as expected!  But not the N8.
    Problem with the Car Kit, or problem with S^3?
    John @ Chicago // 5160 (1999.07.20) > 7160 (2001.06.09) > 6340i (2003.04.26) > 6620 (2004.08.24) > 7610b (2005.05.08) > N91 (2006.06.07) > N95-3 (2007.09.28) > N95-3 #2 (2007.12.05) > E51 (2008.03.10) > N97 (2009.06.11) > N97 #2 (2009.09.11-warranty replacement) > N97 #3 (2009.12.10-warranty replacement) > N8 (2010.12.02) > N8 #2 (2010.12.11-retailer replacement) > 808 (2012.12.10) > X2 Dual Sim (2015.01.19-for motorcycle offline maps use only) %gt; 808 #2 (2015.01.26-manufacturer replacement)

    The N8 on PR1 is still not a good excuse for the many bugs that it has.  It's just unimaginable that something that worked solidly with S60v3 and S60v5 and suddenly with the improved Symbian OS a mature and functional feature suddenly has a bug?  I just don't understand how that could've made it into the N8.  Is it the OS?  Or is it the BT chipset?  In either case, quality control got missed.
    Thanks, though, for letting me know that I'm not the only one to experience this.  I'll stop trying to fix this as this is a problem outside of my control.
    John @ Chicago // 5160 (1999.07.20) > 7160 (2001.06.09) > 6340i (2003.04.26) > 6620 (2004.08.24) > 7610b (2005.05.08) > N91 (2006.06.07) > N95-3 (2007.09.28) > N95-3 #2 (2007.12.05) > E51 (2008.03.10) > N97 (2009.06.11) > N97 #2 (2009.09.11-warranty replacement) > N97 #3 (2009.12.10-warranty replacement) > N8 (2010.12.02) > N8 #2 (2010.12.11-retailer replacement) > 808 (2012.12.10) > X2 Dual Sim (2015.01.19-for motorcycle offline maps use only) %gt; 808 #2 (2015.01.26-manufacturer replacement)

  • Echo into callers phone when mobile is on car kit

    Hi
    I've a new 6120 Classic and have just had a CK-7W car kit fitted. Problem is that when the phone is connected to the car kit the person on the caller's phone recieves an echo. Does any one know how I can get rid of te echo?
    Cheers

    Hi Everyone.
    Remember this.
    Hi.
    I have a CK-7W car kit and have just purchased two Nokia 6120's and have been told that I have to buy a new car kit. As a result I am pretty cranky as I thought it would just be a matter of changing the cradle.
    How did you guys get around this problem?
    What do I need to make my CK-7W work with my 6120?
    Can anyone help please?
    ===============================
    It took a bit of sleuthing around but I found the solution. Even the Guys at the Telstra shop were amazed.
    First I needed a new Cradle so I could use the external aerial and as I often jump in the car with a close to flat Phone battery I also needed to be able to charge the phone in the cradle.
    I do not have the part no for the cradle but it had Charger connections
    Next for Charging I needed a RCD-N807 in line power Adapter
    And a RCD-N807 antenna.
    I can now charge my phone from the cradle and have the advantage of an external antenna.
    As for keeping my phone in my pocket, I have to say that I prefer it where I can see it so I can see who's calling etc and also being in the cradle it is easy to dial out.
    As for Echo's I dont have any.
    All I have to do now is to get my Palm pilot to talk to the phone.
    Marvellous stuff technology, I thought it was supposed to make life easier not make it harder!

  • E61i with Bluetooth car kit - How do make calls wi...

    Hi, I have a new E61i and find most things spot on but find I can make and receive calls through the car kit while its connected fine. My problem comes when the phone goes into the locked mode after the set period of time.
    At this point, although I can still receive calls I am unable to make them through the kit. It shows its trying to dial out then come up straight away with call ended. Unlock the phone and it all works again.
    With a full function car kit now not working 100% its a bit frustrating!! I have tried most of the settings within the bluetooth section of the phone, e.g. the remote SIM mode, but still no joy.
    Any help would be great.

    OK, I solved this for myself after much playing about with the menus and settings. Why oh why is their no direct support from RIM without haveing to purchase a support package?? This is clearly a topic that should be covered in the intruction manual sent out with the ohones, anyway this how to do it in case anyone has the same problem.
    1/ Make a bluetooth pairing.
    2 go to "options", press OK
    3/ go to "Networks and Connections", press OK
    4/ go to "Bluetooth Connections" press OK
    5/ select the paired device and press OK
    6/ select "Full Menu" press OK
    7/ select "Options" press OK
    8/ scroll down to "Services and deselect the tick in "SIM Access Profile"
    9/ Press return and select "Save" press OK.
    The phone now works perfectly with my built in car kit.
    Sirely it is about time phone and car manuefacturers got together to develop a system that works on all car kits.

  • IPhone 4 + TomTom Car Kit

    Hi,
    does anyone know if the new iPhone 4 fits into the four TomTom Car Kit?
    thanks a lot for quick answer!!!
    Sebastian

    Since no one here has an iphone 4, it would be impossible to definitively answer your question. My guess is that it will work fine. However, why not contact TomTom directly as they would be in the best position to answer your question right now.

  • E60 with 616 car kit

    I am trying to pair the E60 phone with the 616 car kit in sim access mode. The phone and car kit go through the pairing process and generate the 16 digit code. The pairing completes on the phone but then the car kit requests a further pin code. Whatever code is then input is incorrect.
    Has anyone got any ideas what I am doing wrong.
    I have successfully paired a 6230i in this way but with the E60 I can only get it to pair in handsfree mode and not sim access mode.

    The pin its asking for is your sim card pin number as the 616 car kit takes over as the phone so it needs the pin to access the sim card correctly. Same as if you stick your sim card in another phone. See page 20 of the user manualMessage Edited by krytens4000 on 06-Oct-2006
    04:10 PM

  • Iphone 4 and tomtom car kit

    if i replace my 3gs with the new iphone 4, will the new one fit in my tomtom car kit?

    This is the response I got from mail support today:
    The TomTom car kit is currently available only for the normal iPhone, iPhone 3G and iPhone 3G S. As iPhone 4G is a newer product from Apple, it has not been tested for the TomTom car kit. Hence we regret that we will not be able to comment on its compatibility with iPhone 4G as of now. However, we are getting a lot of requests from customers regarding the same query and we are in a process to release a iPhone 4G compatible version of TomTom car kit soon. Also, I have forwarded your feedback to our Product Development Team for further review. We take all customer feedback received very seriously in the future development of our products. Suggestions are gathered and organized to understand the areas our customers are most interested in enhancing.

  • 9630 does not connect with Bluetooth Car Kit Speakerphone

    Whenever I try to make a call with my Motorola T215 Car Kit Speakerphone, my BlackBerry 9630 Tour "smart"phone says, Connection to Motorola T215 failed.  I have followed the pairing instructions that came with the car kit precisely and repeatedly, but still get the same result.  To add even more enjoyment to my experience, my connection with the Bluetooth device seems to go on and off as it pleases.  I figure the only way to put an end to this issue is to smash it with a hammer, but if you know of another solution, I would appreciate it.  My carrier is Sprint, and OS version is 4.2.0.285. 

    The first thing I would suggest doing it running an upgrade on your device software. To do this you will need your USB cord and access to the internet.
    Go to: www.blackberry.com/update and then follow the prompts to update your device software.
    This should back up your device data automatically, but to be save incase of any situation that may arise do a backup of your device through the BlackBerry Desktop Software.
    Once the update is done, test the Bluetooth connection.
    Hope this helps.

  • Can an apple care plan be used for a phone that was previously broken and was later turned in for a new undamaged phone?

    I dropped my iphone and the screen cracked so I am paying $200 to exchange it in the mail for a fixed phone.  I know the apple care plan can only be bought for new phones, but will this phone count as a "new phone" and be able to be covered under apple care?

    I see ads on Amazon selling "used" Apple care, If this is decided by the laws of a country, does anyone know if it applies to the US?  I'm interested in covering my MBA and I could save about $100 if I went for one of these "used" deals on Apple Care.

  • Car-Kit

    Hi
    I'm running a N9 and Lumia 9, is there any car kit on the market that supports both phones? CK-200 only lists N9.
    Solved!
    Go to Solution.

    Hi
    I would guess that CK-200 will support Lumia 800 but perhaps test results have not been published.
    CK-100 will support both (not simultaneously), and you can get music streaming from this kit too.

  • Car kit cradle for nokia N95

    I have just bought a new car which has a hands free car kit in it suited for a nokia 6288, my phone is a nokia N95 so it is wider than the cradle that is already fitted for the 6288 and the connection plug in the cradle from the wiring is different in it to what suits a nokia N95.
    can i just buy a new cradle that fits a nokia N95 and change the cradles over and if so what about the plug that connects to the phone from in the cradle, can you buy adaptors for these of some sort to change it to suit the N95 instead of 6288?

    Hi
    The N95 does not have a wired carkit option, only Bluetooth.You don't mention what carkit it is that is already in the car but try pairing to it by Bluetooth and that should give some type of identity.
    Cradle wise you can have one for the N95, but it will only hold and possible charge the phone.
    The Nokia CR-99 will fit but it's a generic cradle.
    There are also third party cradles for the N95 such as the Brodit branded ones.
    www.brodit.com
    Hope this helps?

Maybe you are looking for

  • V2.2.1 is waisting connections / kodo 2.2.1 usable?

    Hi, Summary of the problem: Since 2.2.1, the deepness of the object mapping seems to have a direct correlation to the minimum number of connections needed to execute any query. Insufficient connections cause a kodo system lock. I'm currently moving f

  • Bridge output module

    I have down loaded the output module and placed the the folder in to Bridge CC extensions and the file into workspaces. I still can't get the output module to work. A the PC doesn't ask me to Authenticate the folder and also the PC comes up with a co

  • WDS and authentication

    We have 1200 APs configured with mobility networks (mGRE tunnels terminated on a WLSM). The APs are pointed at the WLSM WDS and pass their authentication requests to the WLSM acting as the WDS using WLCCP. However, these APs also provide wireless acc

  • Oracle Bi publisher installation on windows box

    Hi, The oracle BI publisher is installed in one of the test servers.The jdk1.6.0_06 is used for this installation.The installation was successfully completed and the oracle bi publisher is started by means of a command prompt window which shows the s

  • Is the datatype SDO_GEOMETRY available within the Oracle Express XE edition

    I am trying to run the create table script as listed in the B28004-01 2 Day plus locator Developer Guide for Oracle Database Express Edition. It will not recognise this datatype of SDO_GEOMETRY. Is it included ???