Nokia chat app error. temporary service problem. ...

nokia chat app error.  temporary service problem. (Code 403)  what can i do?

Hi CLONEDmack
The following problems can cause a connection error:
Loss of network coverage
Network congestion
Invalid or missing SIM card
Incorrect access point name (APN) settings
Incorrect date or time on your mobile device
If my post helped you, please don't forget to click on the "White Star" and if it resolved your issue click on "Accept as Solution"

Similar Messages

  • E72 v31 and Nokia Chat

    I upgraded to v31 and Nokia Chat will not open anymore.  I have also tried a hard reset, but it won't get past "updating" the chat program.  I would put in my ovi account details and it would say that there is a temporary service problem (code-2).

    Hi Friends
    Today i tried to install nokia chat it asked me to update the service and i said yes, thereafter it asked for access point and i got all the four IM's.
    I hope the problem was into the nokia messaging ( client delivery server) and now its being rectified. I tried it over my Nokia e72 and now i am online on all 4 IM's.
    regards
    http://shailendraraj.blogspot.com
    if u find this helpful kindly press on GREEN STAR

  • Chat app. Problem

    do 0 hi frndss..
    M using my nokia e5 from last 15 days.
    But its inbuilt chat app. Shows an temp. Error(3)
    while sign in..
    Plz. Help. And plz tell me the location where the access points
    of service provider's are storrd.
    B'coz i wanna delete unused apn's.
    Thinks it's happns due to conflicts of same apn's

    Nokia's chat application is buggy, most time it doesn't work properly. U better install any third party chat application like Nimbuzz or Fring.
    Access points are stored in Tools > Settings > Connections > Access Points > destination (internet/mms/wap)

  • Chat App not working on Nokia C3-00

    I have purchased a Nokia C3-00 3 weeks ago and I found that Nokia Messaging App is not working well.
    Whenever I try changing my online status in Gtalk or Yahoo! IM, the app hangs and screen gets garbled..I cannot go to home screen without a restart. My Chat version is 2.0.29 
    And along with this garbled screen, my chat status is shown as online even if i have shut down chat app. 
    Even an update is not helping. I tried a partial restore phone to factory settings but even that failed.
    Please help me solving this problem. 

    Hi,
    I tested this issue with my C3-00 phone, sw version 8.63 and chat sw version is 2.0.22.
    Chat function works fine with me and i have Ovi chat account and it works well.
    So can you check your phone sw version and  maybe update needed.
    http://europe.nokia.com/support/product-support/device-software-update
    It can be also that chat functionality is not supported by some countries or operator.
    So i suggest you contact in your local area Nokia Contact Center.
    To find your nearest Nokia Care Point, visit http://www.nokia.com/support and select the Repair page.
    Br
    mahayv

  • Nokia c3 Update through wifi / Chat App not found

    hi guys, I successfully updated my nokia c3 through wifi to the latest version 4.60, although I'm currently having a chat problem, when I try to open it, it says "Application not found".
    What would be the best thing to do? I already tried to restore factory settings. Thanks!

    You u need to 1st BACKUP EVERYTHING
    then perform the Firmware Upgrade
    then RESTORE your packed up Programs and Data ...
    or just goto the Ovi store and find some free chat apps and reinstal them,
    its cheaper to paste the links it sends your mobile into your phones browswer and surf using Wifi Connection to download apps and themes. good luck
    N95-1 (8GB-MicroSD),LCG-Audio,Fring,Nimbuzz,Skype,Youtube,iPlayer,Garmin4-GPS.Googlemaps,SkyFire,ZoneTag,Gravity, Sennheiser CX-400-IIs,500-IIs,TR-120 Wireless,HD215'S.AudioTechnica ATX-M50's.BT B-Tube BT Speaker.

  • Nokia music apps problem

    I have unable to download music in Nokia music store error is getting detail as under
    Activation problem

    Hi, thanks for your post.
    You likely owned another Nokia phone before which was used with your Nokia Music Unlimited subscription. You will have to contact Nokia Care by phone, mail or chat (where available) to have the license transferred to your Lumia. Please be aware that after this is done it may take 5 working days for the transfer to propagate through the system.
    Kosh
    Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

  • My nokia moblie give the error cantact service

    hi...my mob give the error cntact service plz ...give me argnt solun what can i do..plz contact my no 9*********
    Moderator's Note: We have removed your contact number for security purposes. 

    Hi nitinkharade,
    What's the model of your phone? The message Contact Service indicates that there could be an internal problem with it. The following steps may help resolve or give some indication as to the source of the issue:
    Remove and re-insert the SIM card and the battery (if the battery is removable).
    If your phone has a memory card, remove and re-insert the card.
    If your phone still displays the same error message, you have to bring it to the nearest authorized Nokia Care Point for inspection and possible repair per @Abi99's advise. See: Local support to know the nearest Nokia Care Point within your area. 
    Note: Sending the phone in will delete all your personal data.
    We look forward to your reply.

  • Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....

    Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open.   I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
    Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
    Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank you

    Hi Iss9243,
    Welcome to the Support Communities!
    You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue.  Hope it helps ....
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Judy

  • APP Error same problem last 4 days..

    Hi gurus,
    Thanks for your time,
    i done all settings, i check all settings twice
    but
    When i run APP it showing some problem,
    iam sending log overview for your review.
    Due date determination additional log----
    >>Document 400007 line item 001 visa MYR 3,333-
    >>Terms of payment 12.09.2009        0 . 000%     
    >> 00 days grace period is being considered
    >> Maximum cash discount should always be taken
    >> Payment must take place before 12.09.2009, next payment on 13.09.2009
    >> Item is due with 0.000% Cash discount
    Payment method selection adittional log----
    >>Payment method selection for items due ow to the amount of MYR 3,333-
    >>Payment method "C" is being checked.
    >>Street or P.O. box entry is  missing
    >>No permitted paymnet method exists
    Information re. Vendor 400011/ Paying company code STFM..........
    ........Payment not possible because of reported error
    End of log
    Job finshed
    Please resolve my problem.
    Thank you
    Anil
    Malaysia.

    Error is because Street / PO Box is set mandatory in OBVCU (Pay method Country definition). You need to fill up these fields in Vendor / Customer Master.

  • The error is occured that Spooler SubSystem App has encountered a problem and needs to be close.

    When, I give the print option in my printer HP Laser Jet 1005, the error is occured that Spooler SubSystem App has encountered a problem and needs to be close. And the Computer is hanged. Kindly give me the suggestion to short out the problem. Kindly give me the reply in my e-mail I.D - {Personal Information Removed}

    For those who still have this problem, I found the solution on this forum -thanks MP2000 (see http://h30434.www3.hp.com/psg/board/message?board.id=Networking&message.id=839#M839)
    Go to the computer that the HP F4280 printer is connected to.
    Click on Start --> Printer and Faxes
    Right click on HP Deskjet F4280 and select Properties
    Click on Advanced tab
    Uncheck "Enable advanced printing features"
    click OK
    And it works!

  • Unique App Error 523 problem

    I have a BB 8350i
    I installed no new themes or applications and the device was sitting idle and locked.  I pressed a button to check the screen and noticed it first told me "Uncaught Exception Index 37 >=37" and then goes to white screen with "App Error 523 / Reset"  I tried removing battery, and pressing reset many, many times to no avail.
    Now though, when it tries to boot up after reset, I hear my ringtone sound for incoming text message (same ringtone for BB messenger notification, and voicemail) and still goes through the same loop with the uncaught exception and ends ath the app error.
    I've tried hooking the device up to my desktop manager but once the device gets into the error messages, my dm software says it can't connect and freezes..
    I last performed a backup of my device about 2 weeks ago but I'd still really prefer not to have to wipe out my data. 
    Unless I'm mistaken, I understand that I can either wipe out the device somehow (don't know how) and start from scratch with my backup file and hope it works, or replace the device if I can.. ?  Am I right and what is the best way to fix this?
    I tried researching on my own on the internet but couldn't find any other reported problems combining the Index 37 error with the App Error. 

    Sometimes when you download stuff like themes, apps, even updates to yahoo msgr it causes that error code (someone told me its a corrupted file), I had it happen weeks after the update I did. I think BB App World even caused it for me once. I have about 200 phones and this comes up from time to time, if you get that message you have no choice but to wipe, re-install the software, and then use your backup to reset your info (I've tried avoiding it but you really can't). If you really didn't download anything or update anything then I'm not sure what caused it, I just know how to fix it.
    I use JL_Cmder to wipe my devices and then hook the device up to BB desktop mgr and it will tell you that you need an update to your software and will install the newest version of your software for you, then you go back and do a restore.
    Make sure your BB desktop mgr is the most current version. I don't know the link to get JL_Cmder, it's all over these forums and on the internet too if you do a search. If you don't like JL_Cmder try BBSAK. BTW, you found a great place for help, I've learned tons from the people here and now everyone at work and of course my friends think I know everything about BB...really I just come on here and do a search.
    Happy Berrying!
    Well Behaved Women Rarely Make History

  • File Proxy Service Problem on errors

    In continuation of this thread...
    File Proxy Service Problem on errors
    We are now facing two problems.
    1.The proxy service is executed twice
    2.File is getting moved to error directory with prefixed file names which we are not able to retrieve and use in the notification email.
    Not sure how to fix :(

    1.The proxy service is executed twice Check if this is due to transaction timeout issue as discussed here. Re: OSB File polling working twice with the same file
    2.File is getting moved to error directory with prefixed file names which we are not able to retrieve and use in the notification email.I am not sure wehther you have any option here. You can check with support. Alternatively can raise notification mail with the timestamp and some file/business identifier from the file. The support person can then open the file from error directory to verify the file/business id in the file or educate the support user that the files will have a prefix

  • Nokia 301 app store problems

    I have a problem with the Nokia Store app in my Nokia 301 (single SIM) RM-841 v.8.02 S40 phone. It's an unlocked phone.
    I opened the store app and it said there was a required update. I said yes and it updated. However, after that, the Nokia Store app doesn't work properly and hangs, and it also displays the icon with a key over it. The Nokia internet doesn't work properly either after the store app update.
    I tried to use the recovery tool wich I downloaded from Microsoft. I installed it, connected the phone with the appropiate USB cable, followed the instructions. The recovery tool detected my phone but after that, it just doesn't seem to work and it says installation failed and gets stuck at 10%.
    What can I do to solve and/or fix the issue to be able to use the Nokia Store app again and the Nokia internet browser.
    I have Windows 7 of 64bit.
    Can anyone help me?

    On the first (differ), you have to say YES, or the download does not work.
    On the second (keep), depends on the app. However, I go for NO usually.
    The built-in apps do not have the download URL embedded, when you first update. Furthermore, even the next updates are going to show that warning because the webserver scripts redirect while updating. Therefore, this message. Botching. This is actually a software-bug in the app and webserver scripts. With one experienced computer scientist, this would not have happened.
    If you do not keep the data, you start all over – except for apps which store your data online, like the Nokia Store. If you start over, you make sure, you do not have RMS with unexpected settings. This is important, if you used an already updated app, which FOTA downgrades. Because you do not know, if FOTA downgraded an app, NO is the safe way. We saw that with Nokia Xpress on some models. Anyway, again, a software-bug because apps can be designed to handle unknown/future settings easily. Botching.

  • Web service Invocation from ADF mobile app errors

    Mobile App Gurus,
    The webservice when invoked from ADF web app is working fine but, when invoked from Mobile APP errors in emulator with as below...
    D/oracle.idm.mobile.OMAuthenticationServiceManager_onPostExecute( 1096): Authentication serivce is oracle.idm.mobile.SSOAuthenticationService
    D/oracle.idm.mobile.OMAuthenticationServiceManager_onPostExecute( 1096): Authentication context status is IN_PROGRESS
    D/oracle.idm.mobile.OMAuthenticationServiceManager_retrieveAuthenticationContext
    ( 1096): Authentication context for the key appsnet5login.sysadmin retrieved from the credential store is : null
    D/oracle.idm.mobile.OMAuthenticationServiceManager_onPostExecute( 1096): Authentication serivce is oracle.idm.mobile.BasicAuthenticationService
    D/oracle.idm.mobile.OMAuthenticationServiceManager_onPostExecute( 1096): Authentication context status is IN_PROGRESS
    D/oracle.idm.mobile.OMAuthenticationServiceManager_doInBackground( 1096): Invalid Authentication URL.
    Please can you let me know if I am missing some step in ADF Mobile App framework.
    Thanks,
    Shreedhar
    Edited by: sh**** on Apr 22, 2013 5:11 AM
    Edited by: sh**** on Apr 22, 2013 6:50 AM

    I don't know if you fixed it already by this time or not. But here is my findings anyway, to be able to inject the security header correctly in any SOA Gateway service, you need to have your Mobile Application Secured, meaning that there is a prompt for username/password when you open it.
    Then you will have to make a Proxy service for the webservice you are using from apps. And you must create it with a SOAP Handler also and write below sample code in the handler to inject the security header in the SOAP call. At last, you are going to deploy this proxy service to your Application Server.
    These steps were taken on a Glassfish server not Weblogic. I think there is an easy way for this if you are using Weblogic..
    Sample handler is below:
    package com.mobile.xxsoap;
    import java.util.HashSet;
    import java.util.Set;
    import javax.xml.namespace.QName;
    import javax.xml.soap.Name;
    import javax.xml.soap.SOAPElement;
    import javax.xml.soap.SOAPEnvelope;
    import javax.xml.soap.SOAPFactory;
    import javax.xml.soap.SOAPHeader;
    import javax.xml.ws.handler.MessageContext;
    import javax.xml.ws.handler.soap.SOAPHandler;
    import javax.xml.ws.handler.soap.SOAPMessageContext;
    public class CustomSOAPHandler implements SOAPHandler<SOAPMessageContext> {
        private static final String AUTH_PREFIX = "wsse";
        private static final String AUTH_NS =
            "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd";
        public boolean handleMessage(SOAPMessageContext context) {
            try {
                SOAPEnvelope envelope = context.getMessage().getSOAPPart().getEnvelope();
                SOAPFactory soapFactory = SOAPFactory.newInstance();
                SOAPElement wsSecHeaderElm = soapFactory.createElement("Security", AUTH_PREFIX, AUTH_NS);   
                SOAPElement userNameTokenElm = soapFactory.createElement("UsernameToken", AUTH_PREFIX, AUTH_NS);
                SOAPElement userNameElm = soapFactory.createElement("Username", AUTH_PREFIX, AUTH_NS);
                userNameElm.addTextNode("redsam");
                SOAPElement passwdElm = soapFactory.createElement("Password", AUTH_PREFIX, AUTH_NS);
                Name passwdTypeAttr = soapFactory.createName("Type");
                passwdElm.addAttribute(passwdTypeAttr,
                                       "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText");
                passwdElm.addTextNode("123456");
                userNameTokenElm.addChildElement(userNameElm);
                userNameTokenElm.addChildElement(passwdElm);
                wsSecHeaderElm.addChildElement(userNameTokenElm);
            } catch (Throwable e) {
                e.printStackTrace();
            return true;
        public Set<QName> getHeaders() {
            return new HashSet<QName>();
        public boolean handleFault(SOAPMessageContext messageContext) {
            return true;
        public void close(MessageContext context) {
    I hope it is clear now...
    Regards,
    Mohamed

  • LINE chat app already support nokia asha 501

    LINE chat app already support nokia asha 501
    Moderator's Note: We have moved your post and changed the title into a subject-related title. This is to keep the forum organized and let other forum users easily see and respond to this post.

    Hmm..
    I think its same as whatsapp..
    This is nice for nokia dual sim..
    Does it works in background..??

Maybe you are looking for

  • Problems generating csv using bat.xlt in CUCM 8.6.2

    Hello gentlemen I`m having some difficulties generating csv from the bat.xlt file downloaded from my CUCM publisher using excel 2010 I download the file, enable editing and macros, I hit the "create file format" button to generate the columns I need,

  • Better Way To Do This? Selector Operator...

    I'm currently writing the selection operator for the algorithm. The aim of it is to rate how the coursework block have been allocated and give there allocation a rating... How I have done it is have a method that searches through the one of the paren

  • How can you tell how much hard drive disk memory is available?

    How do you check to see how much hard drive memory you have left?

  • Keys on macbookpro not working

    Hello my left shift and alt keys on my laptop have stopped working! i bought the laptop a year ago last may so it's not long out of guarantee and too new to have problems like this.  I've searched the help section and can't find any answers to my pro

  • How to create the Portal Service in Portal 7.3,

    Dear Experts, how to create the Portal Service in Portal 7.3, as we create in Portal 7.0 by creating the Portal Project in that we create Portal Service and we can start and stop in Portal Service configuration in System Administration Thanks, Sagar