Nokia CK-7W Car Kit won't switch off after switch...

Hi,
I have a CK-7W car kit (connected via bluetooth).
Recently, the car kit has been reconnecting 2 to 3 seconds after switching the engine of the car off. I cannot seem to stop this from happening, even when clearing memory or even disconnecting the car battery for 20 mins.
Any advice on how to reset the car kit would be helpful.
Thanks,
Chris

Thanks for the response.
The car kit was installed by a Car Phone Warehouse Nokia approved fitter about 4 years ago The kit has worked really well until recently!
The contol button doesn't seem to be stuck in and responds as it should to button presses. In terms of the cable being squashed or damaged. Obviously there is a chance, but in actual fact, only an inch is on show before it is hidden behind the dashboard. In this instance I'm not sure what damage might occur since I don't know how to remove the dash!
Apologies, I'm not certain I understand your comment re:
- "You can rule out the button by disconnecting it then starting the car and connecting, before switching off the car to see if the kit shuts down."
How do I disconnect the button? Does it pull away from the lead / cable?
Many, many thanks for your help,
Chris

Similar Messages

Nokia 3210, which Car kit?

My mother has bought a car with a Cark 91 kit installed.
I have bought her a 6310i to use with it but wants her 3210 back.
Which Cark number, or cradle do I need to get?
Many thanks.

dannyboy wrote:
if you have connected the amplifier wires and the nokia output wires together then you could have damaged the nokia. you would need to put the outputs from you amp to the inputs of the nokia unless the is a very powerfull amplifier.
I need to correct what I say before. Carpc and amplifier was not powered on when I try to get sound from Nokia to speakers. Because I didn't get any sound out from Nokia, I disconnect car kit's speaker wires and I plug in Nokia SP-3 speaker to junction box. So I have not been able to damaged Nokia. Also I don't wanna connect amp outputs to Nokia's inputs because then it cut sound from carpc which I don't want.

IPhone 3GS and Nokia CK-100 Car Kit

Hi All,
I am having a problem with my new iPhone and a Nokia CK-100 car kit. The car kit worked perfectly with my previous phone and the iPhone is in the compatability list for the kit so I'm assuming its been tested. When I first pair the devices they work without any problems. However when I have left the car and come back to it the kit and phone connect automatically as they should and I am able to voice dial using the kit. However when the call is connected no sound comes out of the car speakers. I have to pick the iPhone up, set audio source back to the phone then back to the car kit to get it to work. I really can't be doing this everytime I need to make a call as it defeats the object of the car kit! I have the latest software installed on the car kit and am running 3.1.3 on the iPhone.

Do you know how the installer connected it to the Symphony Head Unit?
He could have connected it to the 'tel in', or used a mute cable that connects directly to the speakers.
If it is the former, try playing with the volume on the stereo during a call, and also turn the CK-100control button during a call (this also controls the call volume).
I have seen something similar where the setting on one was high and the other low
(can't remember which way though!)
Hope this helps!
Message Edited by confiture on 03-Feb-2009 08:55 PM

NOKIA 114 AUTOMATICALlY SWITCH ON AFTER SWITCH OFF

My nokia 114 working fine,no hanging problem but sometimes it automatically switch on after switching off,not always but randomly .i contact nokia care point and they update my phone twice but on change.is it the common sw problem of nokia 114 or is it my device hardware problem ? Is anybody faced with this same problem ?Plz reply any solution . . . . . . . . . . .

How often does the rebooting happen? Does it happen more frequently when your are running some specific application or function? Also what SW version is your phone currently running? You can check this by dialing *#0000#.
http://www.microsoft.com/en/mobile/nokia-x-updates/
http://www.microsoft.com/en/mobile/nokia-x2-update/
http://www.microsoft.com/en/mobile/asha-software-update/
http://www.microsoft.com/en/mobile/support/software-update/wp8-software-update/
http://www.developer.nokia.com/Community/Wiki/Nokia_firmware_change_logs
https://twitter.com/LumiaSWUpdates

IPod Nano (4th Generation) switches on when connected to USB power - shows Menu & hangs (unresponsive to click wheel) - deems off after 5-sec - Switches off after disconnecting from USB Power - syncs with iTunes - Tried 5R's - Problem still persists

1. The iPod Nano (4th Generation - 8GB) switches on, only when connected to USB power by showing apple logo and displays Menu options thereafter..
2. However, I can not access Menu as it is unresponsive to click wheel. As a result it is inaccessible to any further use,
3. NOTE: it displays "Battery Fully charged" icon on the screen without any "Lock" icon.
4. After 5-sec to 10-secs the screen deems off.. i.e. goes to sleep mode.. And thereafter would probably remain like that (sleeeping) for eternity!!!!
5. It Switches off after WITHOUT DISPLAYING any Apple Logo immediately after disconnecting from USB Power.
6. In other words, it can be switched on only through USB power in spite of battery being fully charged.
7. Interestingly, it syncs with iTunes. It is recognised in iTunes (Latest version 11+).. Displays on screen all commands Like.. syncronising, connecting, connected,
8. Allows to add Music, videos like a normal ipod & displays all status information in iTunes.
9. Read Trobleshooting & Tried all 5R's. Registered, Resetted, updated & Restored to iOS 1.0.2
10. It is now displaying to select Language in place of Menu options, with no access through click wheel, centre button whatsoever... Problem still persists
KINDLY GUIDE ME THE SOLUTION. APPRECIATE YOUR RESPONSE in advance...

"I get the feeling that this is a software issue that could probably be solved quite easily"
Since you have already tried all the normal troubleshooting solutions, take the iPod to your nearest Apple Store for a *proper diagnosis.* The staff there will be able to confirm if your problem is software or hardware _*at no cost to you.*_
!http://i50.tinypic.com/izvwo1.gif!

Optical audio in Lion switches off after 30 seconds

I have a new iMac 27" Computer purchased November 2010 with Snow Leopard on. I have upgraded to Lion OS the day it came out.
When I started using it, I noticed that the Optical steam (red beam) would switch off after roughly 30 seconds. I researched this issue and found that OS X powers down the Sound Hardware after 30 seconds if not used, as it is fine under Bootcamp with Windows 7.
So I used a program called Sound 1.0,1 to stop the Optical connection switching off, by playing a silent sound every 20 seconds. But now Lion does not support PowerPC programs by Rosetta, so am back to the original problem, that if the hardware has switched off, I miss the first 2 or 3 seconds of the start of the audio, like Skype announcing that some has signed in / out or on MSN as a message notification.
Any ideas to sort this annoying problem be most grateful.
Peter

Thanks for your help Andrew.
Have tried that and seems to be working at the mo (touch wood). See how it goes.
Can't tell you what a difference it is compared to the monitors speakers.
Thanks Again
Peter

My ipod touch (5) ios6 has suddenly crash causing it not to switch off or switch on

my ipod touch (5) ios6 has suddenly crash causing it not to switch off or switch on while i was opening the notification center

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My network goes off and does not come back unless I switch off and switch on

I have a vodafone connection.
Whenever I go underground while traveling in train, my network goes off and but does not come back unless I switch off and switch on the phone... any suggestions???

I would advice to perform a hard reset (holding Power button + Home button for at least 10 seconds until Apple Logo appears)

My phone switches off after showing horizontal lines on the screen during the restore process and then shows the error 9 problem. please help i am so stressed.

Hello
My iphone 4S switches off after showing horizontal lines on the screen cutting through the apple logo during the restore process and then right after my iTunes shows the error 9 message, this happened 2 days ago when my phone just switched off unexpectedily and has been in this recovery mode since then. i have watched videos on Youtube and i have disabled Firewall before starting the process, i think i have done almost everything. please help anyone what do i do from here?
Just for interest sake i watched this video on youtube where this guy had the same problem but the difference is that he had it on an iPad. he opened the ipad up and did something on the ipad, it took less than a minute then his ipad worked.
I would appreciate it if someone would respond to this as fast as they can i am so stressed.
Regards
Lwando

Read here:
http://support.apple.com/kb/ts3694#9
Error 9 is usually a security software issue.

Muvo N200 Switches off after 1 tr

I'm experiencing a very very irritating problem with my player. It just switches off after playing single track. This problem only surfaced after using for approximately for 2 - 3 months. The other irritating part is that I couldn't access Recovery Mode and thus could not do any firmware upgrade, etc. Anyone can help me on this issue or must I return to Creative to have it RMA ? Thnx

Not if you don't have any problems with .2.0.
Some people will like .5.0 because it gives support for 3 levels of sub-folders which then allows sync with WMP0. But it also changes the volume scale which others don't like!
PB

Switch off after 20%

Hi ,
For the last two days, i m facing this issue, my iphone4S switch off after battery level goes just below 20%. I need to charge it again to switch ON the mobile.
I have upgraded to iOS 6.1.2 two weeks back. Can anyone please help me, your help will be highly appreciated.

Try fully discharging (until it shuts off) and then fully recharging (don't unplug until 100%) to recalibrate the battery meter. You may need to do this a few times.

3G still won't turn off after hitting home and sleep button at same time. Any other ways to try?

3G still won't turn off after hitting home and sleep button at same time. Any other ways to try it?

And when you held them neither the red Off slider nor the Apple logo appeared?
If not then your sleep button is broken, you will need to get it serviced.

My iphone's screen goes black and it behaves like that it is switched off.No switches work and the power button also does not respond.The ringtone do not also respond.The only way to switch on the phone is to press home button and power button together.

My iphone's screen goes black and it behaves like that it is switched off.No switches work and the power button also does not respond.The ringtone do not also respond.The only way to switch on the phone is to press home button and power button together.

Pressing the Home button and the sleep/wake or on/off button together until you see the Apple logo and then release is called a reset.
If no change after a reset, the next step is restoring your iPhone.

Mac 10.6 won't turn off after update

Macbook air a1304 won't turn off after updating unless you push on/off button.

Phone your nearest HP Support to request warranty service. Worldwide contact info can be accessed here>Contact HP
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

My ipad atomatically gets switched off after every 5 mins

From first day only my ipad atomatically gets switched off after every 5 mins and then atomatically gets on after 2-3 mins. is it a hardware problem or some problem in settings? if anybody knows the solution then please let me know....

Is this a brand new iPad2. Did you notice this occurring before you started adding apps? Is this is occurring if you do not have any apps you have started running either active or in the background?
If you have already tried powering off the device, you can try to do a hard reset (Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears, ignore the red slider, let go of the buttons.) and see how it runs without starting any apps.
I do not have instructions for doing a restore but that is the only other step that I think of that you can take to resolve a software based problem.
If you are still seeing the behavior after trying most or all of the above, I would suggest taking it in or returning it for service.

Nokia CK-7W Car Kit won't switch off after switch...

Similar Messages

Maybe you are looking for