Nokia Connectivity Driver 1.00.139 Will Not Uninst...
I have tried anything and I am at my wits end. I have had so many nokia phones now and have just purchased the N73. The problem is I am still unable to re-install Nokia PC Suite. The previous phones I had were 6680 and 6260 both using the DKU-2 Cable. They were both connecting fine until one day it decided to re-install and look for the cable drivers after connecting the cable. It ended, saying it could not find the drivers (not that i had erased them or anything). I uninstalled PC Suite several times, the program has gone from add/programs but the driver still remains. In the Program files folder the following files remain: PC Suite Backup-Containing 104 files Connectivity Cable Driver Folder - Containing file nmwcd.inf (setup information). I have also tried to re-install the dku-2 driver to remove it but get the following error message: "Installation was unable to start the uninstallation of the previous version of Nokia connectivity cable driver". I also get that message but Saying PC Suite when trying to upload PC Suite 6.8. I have no idea what the previous version of pc suite I installed as i still have so many saved exe files on my computer. But I am currently using Windows XP SP2 on an AMD Athlon. The last cable used is DKU-2 and the driver remaining on my computer is 1.00.139. How can I manually remove all traces of any nokia software? I don't know what else to do, and if it doesn't get sorted I'm gonna have to send my phone back as my new phone will be useless! Please Please Please Help? :-(
20-Nov-2006
06:30 PM
raa4 wrote:
That doesn't work the problem is it will not uninstall in the add/remove programs, and the suite cleaner will not do it, or can re-downloading the driver to remove the same driver work.
Sorry this was in response to
20-Nov-2006
06:30 PM
raa4 wrote:
I HAVE FOUND THE DRIVER PROBLEM SOLUTION!! uninstall all nokia drivers from add/remove progs..then download them from nokia then reinstall yr new ones....that worked for me,it seems the drivers u get in the pc suite bundle dont work,took me all bloocy day lol,hope this helps anyone
Thanks for a reply anyway
Similar Messages
-
ipod touch 4g wont connect to itunes or come out of recovery mode, its just stuck on the connect to itunes screen and will not come out, i tried doing a restore but something happened and now it wont finish or do anything else please help and my itunes will not see that its connected. i also tried going though control panel and restarting the service and nothing happens. also i tried redoing the driver but its saying it cannot find any drivers for it
lol ok nvm i fixed it
-
Whenever I update from Windows 7 get error 1602, iPod shows USB connection to iTunes, but iTunes will not recognize the device. None of the Apple documentation helps. The Apple Mobile Device driver is loaded and operating. The anti-virus software and firewall are not at fault (were uninstalled, and made no difference). The iTunes on my older machine running Vista does recognize the inoperative iPod (iTunes has detetced an iPod in recovery mode) and allows me to restore the device. Can anyone help to resolve this problem on the Windows 7 PC?
So yu tried all of this:
Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
If you had then time for an appointment at ther Genius Bar of an Apple store. -
My macbook pro is connected to wifi but it will not connect to the internet.
My macbook pro is connected to wifi but it will not connect to the internet. When I go on safari, it says that "Safari can't verify the identity of the website". Then I tried to update flashplayer but you need the internet to update it. All this only started happening after that Moutain Lion software was downloaded onto the laptop. Please help, I have been internet-less for a couple months now.
Hi rynhelp,
If you are not able to connect to the internet after installing Mountain Lion, see this article for information on how to start troubleshooting:
OS X Mountain Lion: Use Network Diagnostics
http://support.apple.com/kb/PH10984
You may find additional troubleshooting information in this article useful:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
It is written for Lion but works for Mountain Lion as well.
Cheers,
- Ari -
My iphone will not sync to itunes. It will connect to the computer but will not show up anywhere in itunes. PLEASE HELP!!
Hey there Kellee,
It sounds like the device drivers for your iPhone are working in Windows, but the phone is not showing in iTunes. You should be able to get that showing again with the steps in this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Start with these three steps, and there are more in the article if you need them.
1. Update iTunes
Check that you have the latest version of iTunes installed on your computer. In iTunes, select "Check for updates" in the Help menu.
2. Check the USB cable
Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
USB cables that are bundled with third-party products or accessories might support only charging those products (and not transmitting data) or they might work only with the product with which they were sold. Using one of these cables to sync could cause issues. If you are using a third-party case, such as an extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
3. Verify that Apple Mobile Device Support is installed
iOS devices require Apple Mobile Device Support, which should be automatically installed with iTunes. To verify whether it is installed, follow the steps appropriate for your Windows operating system below.
Windows XP: Click Start and choose Control Panel. Open the "Add or Remove Programs" control panel and verify that Apple Mobile Device Support is visible in the list of currently installed programs.
Windows Vista and Windows 7: Click Start and choose Control Panel. Click "Uninstall a program" (or if using Windows Vista's Classic View of the Control Panel, click "Programs and Features"). Verify that Apple Mobile Device Support is visible in the list of currently installed programs.
Windows 8: Move the cursor to the upper right corner, click the magnifying glass, type Control Panel,and press Return. Click "Uninstall a program". Verify that Apple Mobile Device Support is visible in the list of currently installed programs.
If Apple Mobile Device Support is not listed, remove iTunes, QuickTime, Apple Software Update, Apple Application Support, and then reinstall iTunes. Follow the steps appropriate for your Windows operating system below:
Reinstall iTunes for Windows XP
Reinstall iTunes for Windows Vista, Windows 7, or Windows 8
If after reinstalling iTunes Apple Mobile Device Support is still not installed, follow steps in Trouble installing iTunes or QuickTime for Windows.
Thank you for using Apple Support Communities.
Regards,
Sterling -
My iPad is disabled and I can not input my passcode. what do i need to do? I tried to connect to iTunes, but it will not allow me to connect via compute USB as I cannot input my passcode for the iPad.
You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad and restore/re-sync your content to it
-
My keyboard will connect wirelessly but my mouse will not. I have tried many times, put new batteries in etc. The Bluetooth appears to be on (as the wireless keyboard is working). I don't have a 'wired' mouse so I can't get into preferences etc. Is the mouse dead perhaps? The green light is flickering so it should be ok???
Thank you for your help
Sully (frustrated Irishman)From what you say I would suggest the batteries are not connecting properly.
First, thoroughly clean all contacts, both inside the mouse and the contact points of the batteries. Use an alcohol based cleaner (whisky will do, hic!) dampen (not wet) cotton buds for cleaning.
Then check to see if they fit firmly. If you can shake your mouse and hear things are loose, that will be the batteries. Check the make. Apple and Duracell, in that order, are the best batteries. Where slight undersizing has been reported they are with other than the foregoing.
You can resolve the size problem with appropriate packing but that will always be a makeshift solution. After, reassemble, turn on the mouse and with luck, away you go.
Hopefully this will solve your problem but in any case let us know how you get on.
Message was edited by: seventy one -
my itunes keeps telling me to contact support when i try to connect a visa card and will not let me buy music. any ideas why?
No one here can say specifically why. But you need to do what it says, contact iTunes Support. Click the Suppor tab above then the link under the Contact Us area and you'll be take to a page where you'll be guided appropriately.
Regards. -
My iPad is locked and it says to connect to iTunes, and iTunes will not let me connect.
My iPad is locked and it says to connect to iTunes, and iTunes will not let ,me connect.
Try this:
1. Go to Settings>General>Date and Time>Set Automatically>Off
2. Set the date ahead by a few months
3. You should then be able to connect to the store -
I have a MacBook Pro 15" 2.53GHz Mid2009.. updated to Lion which is now 10.7.3 build 11D50b... when I close lid and connect to Cinema Display, display will not activate when keyboard/mouse used... disconnect display, open lid and laptop display will not activate... only way out is hold power button. Worked fine before Lion update. Any Advice?
Thanks very much Coander15... I've printed the doc you pointed me towards and I'll run through it.. hoping it helps!
Before I installed Lion I simply hit any key on the keyboard or clicked the mouse...
The keyboard is USB (usually connected to monitor which is connected to laptop... have tried direct connect to laptop as well with no luck) and mouse is USB wireless to one of those tiny plug in's... have tried direct connect USb mouse as well with no luck.
I could plug the closed/sleeping laptop into the monitor and unplug from the monitor without incident all day/night... always worked fine.
Had heard something about this happening w/ Lion but went ahead anyway.
Oh well...
Hoping your pointer helps... will let you know how it turns out. Thanks very much for responding!!! -
my iphone 4s is stuck on the "connect to itunes " screen. it will not go away nor will restoring it work either. what do i do?
Mine gave me an error in itunes side that it didnt recognize the phone. But when I unplugged and re plugged it it was fine. Or is yours on the screen with the little plug? You might have to go to Apple. I have that happen to a friend on the 7 upgrade. She needed a new phone. oy!
-
I have a Blackberry 8330 and a MacBook. For some reason I started having connectivity issues. The handheld will not sync with the computer via pocketmac. I have uninstalled, etc 15 times. Please help
Hi Peter!
I'm sorry to read that you are having issues with your Sync account.
Your best bet is to follow the steps described in this blogposts and open a bug:
https://philikon.wordpress.com/2011/06/13/how-to-file-a-good-sync-bug/
After that, if you don't want to user Sync in your computer, you can stop it with this simple steps:
* At the top of the Firefox window, click on the Firefox button (Tools menu in Windows XP) and then click Options.
* Once the options window opens, click on the Sync tab.
* At the bottom of the Sync tab click on '''Deactivate this Device''' link -
I was updating my iphone 4s on my computer and there was an error and my phone has the connect to itunes symbol but will not connect to itunes on my computer. I am unable to use my phone and im not sure what to do..
See this support document for help. You may have to do this more than once. http://support.apple.com/kb/HT1808
-
hi can anyone help i bought modern combat 5 blackout and everytime i run it i get an error saying please check your internet connection and try again ,it will not connect has anyone got a solution pls
use it on a diffrent network if u dont have a mc donalds or sone other place to test it most librarys have wifi just to make sure its not that if its not the wifi falut and the app has been re installed may be a bug since this game is still pretty new
-
Imac G5 OS 10.4.11 Itunes will not connect to radio or store. Errors out check internet connection. Safari connects fine.
New downloads will not open i.e. ms office critical update, nor Filemaker re-validate registration, also new intaller of itunes 9.2.1 etc.
After clean install of 10.4 and all updates same problem.
Other 10.4.11 systems I have work fine on ibook etc.
Can I move the system app that opens .dmg files from OK system to imac? Would that even solve the problem?
RamonYou have 10.4.11 Macs that iTunes can connect to the iTunes Store???
I was pretty sure they changed to a minimum of 10.6.8
Are downloading iTunes 9.2.1 from here...
http://support.apple.com/kb/DL1056
Maybe you are looking for
-
I am facing problem in abap program. Requirement : i want to print the data like this delivery no- item- from batch- to batch - material shade- no of cones- netwt- grosswt- no of bags. delivery no & item from lips-vbeln lips-uecha fiel
-
Documents that I open are immediately "changed" by Indesign
Since the newest update of Indesign (2014.1), all the documents that I open are immediately "changed" by Indesign for some reason, so I have to save those documents again. If I open a document just to take a look at it and I want to close it, I get t
-
Logic Express and Digidesign Hardware
I read that Logic Pro supports Digidesign hardware and was wondering if the Express version did the same?
-
User Folder in Finder does not retain arrangement
I have selected the files and folders in my User Folder to be arranged by Name but they always get messed up each time I open it. How to make them stick? All of the other folders retain the settings.
-
Extracting individual drivers from BC 2.1 update ?
I am trying to sync a Windows PDA (Vista OS w/Parallels),,and don't want to do a total update for fear of getting problems that many of you are having trouble with.So, I am wondering whether I for example,get the bluetooth drivers (or any other separ