Nokia CS-10 Fedora Linux, doesn't make detection

Hi!
I'm looking for a documentation to install the CS-10 Nokia modem.My OS is Fedora Linux 12.
I use the scripts of:
http://www.islascruz.org/html/index.php/blog/show/Nokia-Internet-Stick-CS-10-on-Linux.html
But, in the first, I don't see the CD drive (the modem, that say the page). I found a probably solution in:
http://europe.nokia.com/support/product-support/cs-10/software
I downloaded the rmp package of the page, but I don't see a change. Firstly, like after, I don't see a CD/DVD drive to unmount or/and eject.
thnx a lot

I answer to me
Firstly, I have the USB modem without a CDROM behavior ( Like is saw in Ubuntu and Debian ). But my Fedora 12 doesn´t.
I used the advice:
http://www.islascruz.org/html/index.php/blog/show/Nokia-Internet-Stick-CS-10-on-Linux.html
But weren't give me a result. I was install
Before I saw the device with the command "lsusb" like:
Bus 001 Device 005: ID 0421:060c Nokia Mobile Phones
Like the reference (in the end of this comment), I write the next code in the /etc/udev/rules.d/
SUBSYSTEMS=="usb", SYSFS{idVendor}=="0421", SYSFS{idProduct}=="060c", ACTION=="add", RUN+="/usr/bin/eject -s %k", OPTIONS+="last_rule"
Next I was reboot the machine. Then, I see the device shining the red light, and next the green ( brefore I was config a 3G Telcel connection).
Reference:
http://blog.nielshorn.net/2010/02/using-a-nokia-cs-10-gsm-modem-on-slackware/
Anyway thnx

Similar Messages

Arch Linux doesn't automatically detect my webcam.

I have a Mikomi USB webcam (not sure which drivers it uses). When I'm logged in and on my desktop (which is, for the record, Gnome 3) and I connect my cam, Arch Linux doesn't detect it. I can resolve this problem, however, by logging out and logging back in, in which the camera will be detected and will work.
How can I get it to automatically connect on insertion?
EDIT: Seems as if Arch Linux does detect it on insertion ("lsusb" shows "ALi corp.", which I believe is what the 'cam is based on), but it won't show up in Cheese, Opera, etc.
Last edited by oldtimeyjunk (2012-10-07 21:29:04)

oldtimeyjunk wrote:How can I get it to automatically connect on insertion?
A udev rule.

Nokia Ovi Suit for Linux

I am using Fedora 14. I want to connect to internet using my Nokia N8 mobile. There is no nokia ovi suit for linux and hence I am unable to connect to internet. Can anyone please help?

Hello
Here, Ubuntu, USB cable, and Gnome Default Network Manager
Just right clic on manager to modify connection, choose Wide Band Mobile connection et follow assistant....
That's all, the connection is created, then left clic on manger to use it !
Other way ? Use special apps on the N8 to convert it in a WiFi Hotspot like Joiku Spot

Oracle 10g for Fedora Linux 3 with Kernel 2.6.9

Can any body suggest a link, from where I can download the Oracle database 10g for Fedora Core 3 Linux with Kernel version 2.6.9-1*.
I went through the oracle site site but i was not able to find a one for Fedora 3 instead i found for Fedora 4.
Thanks.......
Suneel

You will not find one exactly as you require.
As I suggested in the duplicate link
Oracle 10g for Fedora Linux 3 with Kernel 2.6.9 you need to take a version of Oracle that seems to close to your Linux and then carefully tinker to make it work.,

Installation problem on fedora linux

Hi
I am trying to install oracle 10g to Fedora Linux.
When I type ./runInstaller :
Exception java.lang.UnsatisfiedLinkError: /tmp/OraInstall2007-08-21_12-40-12AM/jre/1.4.2/lib/i386/libawt.so:...........................
Exception in thread main java.lang.NoClassDefFoundError
Please help me to solve this problem

Ricardinho,
try post full error message (or stack trace) because in this case we can only guess...
Also when you post name of Linux distribution then don't forget post the version.
Anyway according to partial error message I think there is missing libXp.so.6 library on your OS.
So execute "yum install libXp" to install required package. Od locate the package on installtion media and install it via "rpm -ivh" command.
Note: In FC5 and later libXp.so.6 is included in libXp package. In FC4 and older releases you need to install xorg-deprecated-libs package.

SAPGUI problem on FEDORA linux

Hi friends,
we have worked on window OS.
recently we have changed the OS , we are working on FEDORA linux,
comming to problem.
production server and quality server are working fine.
but development server is not working.
when ever we have open this server it will not respond, it shows only blank screen.
the GUI is completly goes to wait stage. it shows a white screen.
what is the problem please post the solution immediatly.
Regards,
Sateesh.

Dear sateesh,
could you please explain in more detail what you are referring to when saying
In our organization sap is installed on fedora linux with 'jre1.6.0_14'
In this forum, we normally assume that you mean SAP on the server side. But the subject of this thread is called, SAPGUI problem, therefore I assume that you are only facing SAPGUI problems on the client side (and not the server side).
SAPGUI problem on the Client side:
For officially supported distributions for the JavaGUI [1] are mentioned in SAP note 959236 - Supported Java frontend platforms for 7.10 / 7.11 / 7.01. This note says that Fedora Linux is supported, so you are on the safe side here.
Also, the JavaGUI is fully compatible with Java 1.6. I', using the JavaGUI with jdk1.6.0_14 without any problems. I'm using a small script to start the JavaGUI on my machine. You should try it youself. Please note that you have to adept the paths accordingly. Sometimes it happens that some variables are not set correctly. Also, the Java path is very important!
#!/bin/sh
# SAP GUI Path
SGP=/home/hannes/data/progs/sapgui/SAPGUI7.10rev8
export SNC_LIB=/usr/lib/libsecude.so
export CREDDIR=/dev/shm/ssoclient-`id -u`
export JAVA_HOME=/home/hannes/data/progs/jdk1.5.0_16
export PLATIN_JAVA_VER=1.5.0_16
export PLATIN_JAVA=$JAVA_HOME/bin/java
export LD_LIBRARY_PATH=$SGP/bin
$SGP/bin/guilogon
Thanks,
Hannes
[1]: ftp://ftp.sap.com/pub/sapgui/java/710r8/

On my iPhone 4s, how do I make it so it doesn't make a sound when I send a text?

On my iPhone 4s, how do I make it so it doesn't make a sound when I send a text? Even if my ringer is set to high, I don't want it to make a sound when it sends my texts..can anyone help?

Flip the Ring/Silent switch.

Animation logic doesn't make sense....

I know this probably should go to a suggestion/feature request or what not but A. I haven't been able to find the place for that and B. I felt like it'd make sense to see what others thought of this as well....
Firstly....I'm learning flash right now and the animation in it is simply put...."backwards". Every other animation program I've touched made sense but here....its mind boggling. After effects, 3dsmax, maya, just about any other animation software you ALWAYS do the animation THEN place the keyframe.
Why is this important? Because then if you move your object just to see how it would be placed elsewhere temporarily and don't like it, you don't have to undo...or if you moved it accidentally you don't have to try and move it back into place. It doesn't key unless you tell it to key. Unless there's some feature in flash I've not yet discovered that reverses this. The other reason is for the sake of conformity. Sure flash isn't the same as other animation programs but if ctrl+Z is undo universally why do you have to go and change it, just to be different?
Thats not all. It doesn't make sense to have to push a button to edit multiple key frames. Why can't we just select them all and then edit, why add in a useless extra step to edit frames?
Lastly and the most annoying part, is the fact that you need to add in 'blank' keyframes to see your animation play. How did this even make sense from inception? Every other animation program your object will always exist ad infinitum unless you make it disappear. Why force us to add keyframes just to see what we have so far...doesn't it make more sense to just push the play button and see it playing endlessly and then during output you set the amount of frames u want rendered? Even more mind boggling is the fact that if you have an element animated within its own timeline you cannot see that animation in the main stage unless you add blank keyframes? Whats the purpose of these blank keyframes? Its so far as I can see just a needless step that never should have been there.
Well thats my rant.
Again, I don't script, I'm still learning it, but I come from a heavy background of animation of after effects/fcp/premiere and 3d packages. They are all consistent with how animation works, but here it just seems like it wasn't very thought out.
Maybe there are some reasons for the way its done for the sake of actionscript or some other reasons I'm not yet aware of. So forgive me if what I'm saying in actuality doesn't make sense. But if it does.....sure this would require what would most likely be a huge overhaul of flash's animation system, certainly not enough time to make it in for cs5....but at least as a future patch or in cs6 it would really make things more logical and flat out less complicated.
Thanks for reading, comments/critiques are welcome.

What is your problem?

My iphone dosen't doesn't make key tone sounds anymore when I write a text message or when I want to dial a phone number I don't know how to fix this problem, I don't hear the clicking noise anymore does anyone know how to fix this problem?

My iphone dosen't doesn't make key tone sounds anymore when I write a text message or when I want to dial a phone number I don't know how to fix this problem, I don't hear the clicking noise anymore does anyone know how to fix this problem?And all the sounds on my phone are on, even the keyboard clicks.

Try restarting your iPhone by holding down the on/off and the home buttons at the same time until you see the Apple logo, double check the volume button just in case. If you still can't hear the tones go into your settings>sounds and make sure the options are on.

Error in installation Oracle 8.1.6 on Fedora linux

I am getting the following error message while installing Oracle 8i release 2 (8.1.6) for linux intel on Fedora Linux.
"Symbol errorno, version GLIBC-2.0 not defined in libc.so.6 with link time reference (libzip.so)"
Earlier I have sucessfully installed on Redhat linux 8.0 without any problems.
Kindly help

All the rpms mentioned in above link are already installed. the same error comes with Oracle 9i/AS also.
I quote here the exact error message:-
[oracle@sczopngs cdrom]$ ./runInstaller
[oracle@sczopngs cdrom]$ Initializing Java Virtual Machine from /tmp/OraInstall/ jre/bin/jre. Please wait...
/tmp/OraInstall/jre/lib/linux/native_threads/libzip.so: symbol errno, version GL IBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
I don't have newer version of Oracle for linux , but dont think a newer version will solve the above problem as the same message is coming with Oracle 9i/AS also when I tried just to test..
This may problem with new relase of Linux Fedora with kernel 2.6.2.

Can't get windows 8.1 with dual boot for fedora (linux) . system is UEFI .

Can't get windows 8.1 with dual boot for fedora (linux) . system is UEFI .

Hi,
Any update here?
We may seek help at Fedora forum as Milos suggested, if convenient we could share the related thread link here for reference.
In addition, please also check the information in the similar thread:
Dual Boot Windows 8 and Linux?
Best regards
Michael Shao
TechNet Community Support

I am using jboss 4.2, java5.0 and Fedora Linux Enterprise Version 4.0 with

Hi,
I am using jboss 4.2, java5.0 and Fedora Linux Enterprise Version 4.0 with kernel 2.6 and NPTL 2.3.4
I am using open source network chart generation API provided by geosoft ( http://geosoft.no/graphics/). This API generates chart into swing window.
I wrote the code to change this swing window into web browser compatible jpeg image. I used thread to generate the image. It is working fine, for one user and no other processes running on the application.
ISSUE:- When more than 5 users hit the application at the same time, some images get generated, some donot, there is no fixed trend to this image generation process.
I analyzed CPU timing, it is using 100% CPU and after the images are generated / not generated, the CU usage goes down to zero.
When I used the same code with Linux 9.0 (kernel 2.4, NPTL � 0.6), rest remain the same, it is working perfectly fine with more than 10 users, with all images being generated within 30 secs
Can somebody help me out to figure out whether it is a kernel issue / NPTL issue? Does it have something to do with thread processing?
Code for network chart generation :-
NetworkGenerator ntw=new NetworkGenerator();
BufferedImage img;
ntw.setVectRootNodes(vectRootNodes);
ntw.setHashChildNodeNames(hashNodeData);
ntw.setHashNodeRelation(hashNodeRelation);
ntw.setHashNodesCreated(hashNodesCreated);
ntw.setSupplyChainBean(supplyChainBean);
Thread t=new Thread(ntw);
t.setPriority(Thread.MAX_PRIORITY);
t.start();
try{
t.join();
catch(Exception e)
DebugManager.doDebug(className.toString(),e);
if(t!=null)
System.out.println(t.getState().name());
System.out.println(t.isAlive());
public class NetworkGenerator extends JFrame implements Runnable{
public void run()
//call the garbage collector
System.gc();
// Create the graphic canvas
window = new no.geosoft.cc.graphics.GWindow();
window.getCanvas().setSize(screenWidth,screenHt );
// Create the GUI
JPanel topLevel = new JPanel();
topLevel.setBackground(new Color(255,255,255)) ;
topLevel.setLayout (new BorderLayout());
getContentPane().add (topLevel);
topLevel.add (window.getCanvas(), BorderLayout.CENTER);
topLevel.setVisible(true);
// Create scene with default viewport
scene = new no.geosoft.cc.graphics.GScene(window, "My Scene"+ (new Date().getTime()));
no.geosoft.cc.graphics.GStyle style = new no.geosoft.cc.graphics.GStyle();
style.setForegroundColor (new Color (0, 0, 0));
style.setBackgroundColor (new Color (255, 255, 255));
style.setFont (new Font ("Arial", Font.BOLD, 10));
scene.setStyle (style);
int xPos=minY ;
int yPos=0;
int noofChild=vectRootNodes.size();
int dev=(screenHt -minY )/(noofChild+1);
int newDev=Math.round(dev-(dev/5));
//log.debug("---------noofChild-----------------------------------"+noofChild);
if(!hashNodesCreated.isEmpty())
for(int i=0;i<noofChild;i++)
yPos=minY +(dev*(i+1));
String nodeName = vectRootNodes.get(i).toString();
log.debug("root nodename===="+nodeName+" with ypos :"+yPos);
//log.debug("nodeName=="+nodeName);
//create root nodes
Node rootNode = createChildNode( nodeName,minY,screenHt,xPos, yPos ,newDev,1);
scene.add(rootNode);
log.debug("screenWidth ===="+screenWidth );
// if(screenWidth>minExtXval)
// minExtXval = screenWidth;
// w2 o
// * |
// * |
// * |
// * w0 o-------o w1
double w0[] = {0.0,screenHt ,0.0};
double w1[] = {screenWidth,screenHt,0.0};
double w2[] = {0.0,0.0,0.0};
scene.setWorldExtent (w0, w1, w2);
this.pack();
Thanks in advance.

How do I do that as I checked for it in utilities and is not there? Thanks in advance

Red Hat Linux project merges with Fedora Linux project

Will this mean that the Fedora Linux project will become the officially supported Linux platform for Java releases in the near future? Please reference http://fedora.redhat.com/
What will be the supported Linux platform for v1.5?

A sidenote: I have been happily using a plethora of JDK and J2SE versions on different versiond of SUSE Linux although SUSE was never "the" officially supported Linux distribution.

IPhone doesn't make audible alerts while docked

My iphone 4 doesn't make audible alerts for text messages while docked. Is there a fix for this?

I seem to have a similar problem as I cannot seem to figure out how to set audible alerts for all mail, text messages or WhatsApp when my iPhone5 is locked! Can anybody help or do I have to go back to Blackberry for that?

It doesn't make any sense (trouble adding new songs/podcasts)

Hi all
When I add new songs to my Ipod shuffle, some will play, some won't. When I try to add some podcasts, I can't add them directly by dragging and dropping, so I had to create a new playlist where I can add some new podcasts. And some will play, and some won't.
By the way, I can't see a whole list of files "inside" the ipod. Instead, I see them in two separated screens.
OS: Windows XP
All podcasts and songs are ok, they can be listened to when played on iTunes
Already changed options for podcasts, so they will play when playing in random order.
iPod shows up in iTunes when pluged in
Used apple stuff for some time now.
I used a ipod shuffle 2nd gen for some time and no problem at all...
thanks in advance.
This whole things it has been doing my head in for the last two days...
PS: And sometimes it only plays podcasts. And sometimes only music and no trace of podcasts. As I said... it doesn't make any sense...
Message was edited by: MGLVGLM
PS 2nd: Tried again, now with two podcasts (ok to play random) and one song. Only can listed to the song. No idea why it doesn't play the podcasts.
Help anyone?
Thanks again
Message was edited by: MGLVGLM

well, it seems that I have found the solution (i read somewhere, not already checked)
Since ipod shuffle 3G, you have to add podcasts to a playing list, otherwise you can't listen to them.
If I get it solved, I will write here for the next who doesn't receive much help from Apple and has to google the solution.

Nokia CS-10 Fedora Linux, doesn't make detection

Similar Messages

Maybe you are looking for