Nokia E51 refuses to connect to Nokia BH800 blue...

It took quite a bit of trouble trying to resolve ths problem but it should have been quite simple . The problem itself isn't hard to resolve if you can get the information you'll require to set it right . Ok so here is the solution . Open up menu on the E51, Open up tools , Open settings , Open general. Open factory settings .click on "restore allfactory settings " . Your fone will restart after a few mins.You should now be able to connect your bluetooth unit to the E51 using the normal method . I hope this post is helpful to someone .

If you read this forum, you will see loads of posts about Microsoft Bluetooth and Widcomm conflicts, I suggest you read those and also www.nokia.com/pcsuite support pages FAQ section about Bluetooth (basically you have to choose what you use, Microsoft or Widcomm and activate only one and uninstall the other)
The cable thing does not make sence, if PC Suite indicates in Launcher view:
"N70 connected via cable" and you have usb icon in phone screen, you must be connected ?
Device manager is: My Computer - right click, manage, device manager - wireless communication devices (and modem under "modems") Are you really saying you cannot see anything there..weird, if you are connected...
If you were actually talking about Windows Explorer/Nokia Phone Browser and you get operation could not be completed,do this:
go to Start -> Run and enter
Regsvr32.exe %Windir%\System32\Ole32.dll
Click OKMessage Edited by manta on 23-Feb-2006
08:13 PM

Similar Messages

Installed 10.8.4 and now my wifi refuses to connect to any WPA2 network!

Installed 10.8.4 update yesterday in the office. After restart my wifi refused to connect to the network although it was connecting to it fine before the update. Used ethernet and downloaded the Combo update. No improvement. It connects to the public wifi but not to the WPA2. Went home and opened my MBA and found that it does not connect to my peronal WPA2! Removed security from my Guest network and it connects fine. Put the WPA2 back, and it refuses to connect. Any ideas?

seems the problem is that the 10.8.4 didn't install properly. here is the install log:
Jun 13 11:27:42 localhost UserEventAgent[11]: SUNotificationPlugin[uid=0]: Start event monitoring
Jun 13 11:27:50 localhost UserEventAgent[208]: SUNotificationPlugin[uid=501]: Start event monitoring
Jun 13 11:27:50 localhost UserEventAgent[208]: SUNotificationPlugin[uid=501]: trigger on login only to notify appstoreupdateagent
Jun 13 11:27:51 localhost Software Update[266]: SUCheckService: sending result 2 to peer
Jun 13 11:27:51 localhost UserEventAgent[208]: SUNotificationPlugin[uid=501]: check done with result SUCheckServiceResultUpToDate
Jun 13 11:27:51 localhost UserEventAgent[208]: SUNotificationPlugin[uid=501]: Notifying appstoreupdateagent for user 501
Jun 13 11:27:51 localhost UserEventAgent[208]: SUNotificationPlugin[uid=501]: appstoreupdateagent notification sent
Jun 13 11:29:30 localhost Install OS X Mountain Lion[426]: @(#)PROGRAM:Install PROJECT:Install-735
Jun 13 11:29:30 localhost Install OS X Mountain Lion[426]: @(#)PROGRAM:IA PROJECT:InstallAssistant-360.1
Jun 13 11:29:30 localhost Install OS X Mountain Lion[426]: Hardware: MacBookAir4,2 @ 1.80 GHz (x 4), 4096 MB RAM
Jun 13 11:29:30 localhost Install OS X Mountain Lion[426]: Running OS Build: Mac OS X 10.8.4 (12E55)
Jun 13 11:29:30 localhost Install OS X Mountain Lion[426]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
Jun 13 11:29:30 localhost Install OS X Mountain Lion[426]: Env: TMPDIR=/var/folders/xq/m2rn_pbx7h75qgc4r4zg3j940000gn/T/
Jun 13 11:29:30 localhost Install OS X Mountain Lion[426]: Env: SHELL=/bin/bash
Jun 13 11:29:30 localhost Install OS X Mountain Lion[426]: Env: HOME=/Users/smazhar
Jun 13 11:29:30 localhost Install OS X Mountain Lion[426]: Env: USER=smazhar
Jun 13 11:29:30 localhost Install OS X Mountain Lion[426]: Env: LOGNAME=smazhar
Jun 13 11:29:30 localhost Install OS X Mountain Lion[426]: Env: SSH_AUTH_SOCK=/tmp/launch-0l6NTO/Listeners
Jun 13 11:29:30 localhost Install OS X Mountain Lion[426]: Env: Apple_Ubiquity_Message=/tmp/launch-k7hwIw/Apple_Ubiquity_Message
Jun 13 11:29:30 localhost Install OS X Mountain Lion[426]: Env: Apple_PubSub_Socket_Render=/tmp/launch-k5ePm5/Render
Jun 13 11:29:30 localhost Install OS X Mountain Lion[426]: Env: COMMAND_MODE=unix2003
Jun 13 11:29:30 localhost Install OS X Mountain Lion[426]: Env: __CF_USER_TEXT_ENCODING=0x1F5:0:0
Jun 13 11:29:30 localhost Install OS X Mountain Lion[426]: Using distribution archive from /Applications/Install OS X Mountain Lion.app/Contents/SharedSupport/OSInstall.mpkg
Jun 13 11:29:31 localhost Install OS X Mountain Lion[426]: Configuring products from SharedSupport folder
Jun 13 11:29:31 localhost Install OS X Mountain Lion[426]: Using product <OSInstallDVDProduct> based on media at /Applications/Install OS X Mountain Lion.app/Contents/SharedSupport at distance 5
Jun 13 11:29:31 localhost Install OS X Mountain Lion[426]: Using product <OSInstallESDProduct> based on distribution at /Applications/Install OS X Mountain Lion.app/Contents/SharedSupport/OSInstall.mpkg at distance 5
Jun 13 11:29:31 localhost Install OS X Mountain Lion[426]: Checking Software Update catalog URL http://swscan.apple.com/content/catalogs/others/index-mountainlion-lion-snowleop ard-leopard.merged-1.sucatalog
Jun 13 11:29:31 localhost Install OS X Mountain Lion[426]: No available package ref for compatibility update. Ignoring.
Jun 13 11:29:31 localhost Install OS X Mountain Lion[426]: JS: installCheckScript threw exception TypeError: 'null' is not an object (evaluating 'my.target.systemVersion')
Jun 13 11:29:44 localhost Install OS X Mountain Lion[426]: IATool launched
Jun 13 11:29:44 localhost Install OS X Mountain Lion[426]: Using product <OSSoftwareUpdateCatalogProduct> from product keys (null) at distance 25
Jun 13 11:29:45 localhost Install OS X Mountain Lion[426]: Connected to IATool 7fd660f0
Jun 13 11:29:46 localhost Install OS X Mountain Lion[426]: Preventing machine sleep.
Jun 13 11:29:46 localhost Install OS X Mountain Lion[426]: Using product IA_PKSecureNetEnabledProduct <file://localhost/OS%20X%20Install%20Data/> at distance 5
Jun 13 11:29:46 localhost Install OS X Mountain Lion[426]: Using mutable product path: /OS X Install Data
Jun 13 11:29:46 localhost Install OS X Mountain Lion[426]: Retrieving 0 packages (0.000 GB)
Jun 13 11:29:46 localhost Install OS X Mountain Lion[426]: Verifying InstallMacOSX.pkg/InstallESD.dmg
Jun 13 11:30:10 localhost Install OS X Mountain Lion[426]: Finished operation queue
Jun 13 11:30:27 localhost Install OS X Mountain Lion[426]: Linking self-contained dmg into mutable product
Jun 13 11:30:30 localhost InstallAssistantTool[435]: Failed to prep /Volumes/Mac OS X Install ESD for brtool
Jun 13 11:30:30 localhost InstallAssistantTool[435]: Failed to prep /Volumes/Mac OS X Base System for brtool
Jun 13 11:30:30 localhost Install OS X Mountain Lion[426]: Restart requested
guid 0, euid 0
argv[0] = /Applications/Install OS X Mountain Lion.app/Contents/Resources/brtool
argv[1] = copyfiles
argv[2] = /Volumes/Mac OS X Base System
argv[3] = /
argv[4] = /OS X Install Data/InstallESD.dmg
argv[5] = /BaseSystem.dmg
Warning: kextd unavailable; proceeding w/o lock for <unknown>
Warning: proceeding w/o DiskArb
Ensuring /Volumes/Mac OS X Base System's caches are up to date.
Note: /Volumes/Mac OS X Base System/mach_kernel: No such file or directory
Primary kext cache does not need update.
CSFDE property cache does not need update.
rebuilding /System/Library/Caches/com.apple.corestorage/EFILoginLocalizations
Warning: Error 30 rebuilding /System/Library/Caches/com.apple.corestorage/EFILoginLocalizations
creating com.apple.Boot.plist data with UUID 69467D56-8D10-3B5C-B093-5914A842EF2E.
Mounting helper partition...
Looking for missing files.
Copying files used by the booter.
Error copying /Volumes/Mac OS X Base System/usr/standalone/i386/EfiLoginUI/ to /private/var/run/brmnt/com.apple.boot.P/usr/standalone/i386/EfiLoginUI/
ucopyRPS: copying files for booter: No space left on device
Rolling back any incomplete updates.
Cleaning up fallbacks.
Unmounting helper partition disk0s3.
Failed to update helper partition.
BRCopyBootFiles errored: 28
brtool function result = -12
Jun 13 11:31:42 localhost UserEventAgent[11]: SUNotificationPlugin[uid=0]: Start event monitoring
Jun 13 11:31:54 localhost UserEventAgent[234]: SUNotificationPlugin[uid=501]: Start event monitoring
Jun 13 11:31:54 localhost UserEventAgent[234]: SUNotificationPlugin[uid=501]: trigger on login only to notify appstoreupdateagent
Jun 13 11:31:55 localhost Software Update[344]: SUCheckService: sending result 2 to peer
Jun 13 11:31:55 localhost UserEventAgent[234]: SUNotificationPlugin[uid=501]: check done with result SUCheckServiceResultUpToDate
Jun 13 11:31:55 localhost UserEventAgent[234]: SUNotificationPlugin[uid=501]: Notifying appstoreupdateagent for user 501
Jun 13 11:31:55 localhost UserEventAgent[234]: SUNotificationPlugin[uid=501]: appstoreupdateagent notification sent
Jun 13 11:31:55 localhost Software Update[344]: SUCheckService: okay to stop (did timeout=0)

DPM failing SQL backups due to error: "the SQL Server instance refused a connection to the protection agent. (ID 30172 Details: Internal error code: 0x80990F85)

I ran across this error starting on 6/4/2011 and have been unable to find the root of the problem. In our environment, we have a DPM 2010 server dedicated to backing up all our SQL envrionment (about 45 SQL Servers total). All of the SQL
environment is backing up fine except for a SQL Cluster Application. This particular SQL Instances is part of a 6 node failover cluster with 6 SQL Instances distributed amongst them. The other 5 SQL instances in the cluster are backing
up fine; only one instance is failing. The DPM Alerts section shows this error when attempting to do a SQL backup of one of the databases on this SQL instance:
Affected area: KEN-PROD-VDB001\POSREPL1\master
Occurred since: 6/11/2011 11:00:56 PM
Description: Recovery point creation jobs for SQL Server 2008 database KEN-PROD-VDB001\POSREPL1\master on SQL Server (POSREPL1) - Store Settings.ken-prod-cl004.aarons.aaronrents.com have been failing. The number of failed recovery point creation jobs =
4.
If the datasource protected is SharePoint, then click on the Error Details to view the list of databases for which recovery point creation failed. (ID 3114)
The DPM job failed for SQL Server 2008 database KEN-PROD-VDB001\POSREPL1\master on SQL Server (POSREPL1) - Store Settings.ken-prod-cl004.aarons.aaronrents.com because the SQL Server instance refused a connection to the protection agent. (ID 30172 Details:
Internal error code: 0x80990F85)
More information
Recommended action: This can happen if the SQL Server process is overloaded, or running short of memory. Please ensure that you are able to successfully run transactions against the SQL database in question and then retry the failed job.
Create a recovery point...
Resolution: To dismiss the alert, click below
Inactivate alert
I have checked the cluster node this particular SQL instance is running on using Perfmon and the machine is nowhere near capacity on CPU, memory, network, or Disk I/O.  I have failed this SQL Application to another node in the cluster and
receive the same error (this other node has another clustered SQL application on it that is actively running as well as backing up fine). The only thing that I am aware of that has changed is that we installed SP2 for SQL 2008 about 2 weeks prior
to when the failures started to occur. However, we updated all six clustered SQL Instances at the same time and only this one is having this issue so I don't believe that caused the problem. We are running SQL 2008 SP2 (version 10.0.4000.0)
on all clustered instances along with DPM 2010 (version 3.0.7696.0) on this particular DPM server that has the issue.
One last thing, I have also noticed errors in the event log pertaining to the same SQL backups that are failing (but the time stamps are not concurrent with each backup attempt):
Log Name:      Application
Source:        MSDPM
Date:          6/13/2011 1:09:12 AM
Event ID:      4223
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      KEN-PROD-BS002.aarons.aaronrents.com
Description:
The description for Event ID 4223 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
DPM writer was unable to snapshot the replica of KEN-PROD-VDB001\POSREPL1\model. This may be due to:
1) No valid recovery points present on the replica.
2) Failure of the last express full backup job for the datasource.
3) Failure while deleting the invalid incremental recovery points on the replica.
Problem Details:
<DpmWriterEvent><__System><ID>30</ID><Seq>1833</Seq><TimeCreated>6/13/2011 5:09:12 AM</TimeCreated><Source>f:\dpmv3_rtm\private\product\tapebackup\dpswriter\vssfunctionality.cpp</Source><Line>815</Line><HasError>True</HasError></__System><DetailedCode>-2147212300</DetailedCode></DpmWriterEvent>
the message resource is present but the message is not found in the string/message table
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="MSDPM" />
    <EventID Qualifiers="0">4223</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-06-13T05:09:12.000000000Z" />
    <EventRecordID>68785</EventRecordID>
    <Channel>Application</Channel>
    <Computer>KEN-PROD-BS002.aarons.aaronrents.com</Computer>
    <Security />
</System>
<EventData>
    <Data>DPM writer was unable to snapshot the replica of KEN-PROD-VDB001\POSREPL1\model. This may be due to:
1) No valid recovery points present on the replica.
2) Failure of the last express full backup job for the datasource.
3) Failure while deleting the invalid incremental recovery points on the replica.
Problem Details:
<DpmWriterEvent><__System><ID>30</ID><Seq>1833</Seq><TimeCreated>6/13/2011 5:09:12 AM</TimeCreated><Source>f:\dpmv3_rtm\private\product\tapebackup\dpswriter\vssfunctionality.cpp</Source><Line>815</Line><HasError>True</HasError></__System><DetailedCode>-2147212300</DetailedCode></DpmWriterEvent>
</Data>
    <Binary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inary>
</EventData>
</Event>
Any help would be greatly appreciated!

Don't know if this helps or not, but I also noticed another peculiar issue that is derived from this problem. If I go to "Modify protection group", then expand the cluster, then expand all six nodes in the cluster, five of them show "All SQL Servers"
and allow me to expand the SQL Instance and show all databases; the one that is having a problem backing up, when I expand the node, doesn't even show that SQL exists on the node, when in fact, it does.
I would also like to add that the databases on this node that will not backup are running fine. They run hundreds of transactions daily so we know SQL itself is OK. Even though it is a busy SQL Server, there is plenty of available resources as
the SQL buffer and memory counters show the node is not under durress.

1st Gen iPad won't connect to my home router. EVER. Refuses to connect to my wifi.

HELP ME PLEASE WITH THIS 1st GEN IPAD refusing to connect to Wi-Fi ISSUE
It shows up as having full signal, and shows the name of our network. But go to Safari and try to go do anything and it spins and spins then tells me "Cannot Open Page...Safari could not open the page because the server stopped responding." Well...it never responded in the first place, so....
Apple says it works fine on their in-house system when we took it in. Told us to call Comcast. More than once, Comcast walked me through 20 mins of reconfiguring the router and the iPad and multiple phone calls and a trip to Comcast later...no go.They say it's Apple's problem now or that I have to buy a special Comcast technical support account for further help --- which doesn't guarantee anything....
This is rather BS to have this unusable thing for so long and now be expected to pay MORE money to get something like this working....and why won't anyone take responsibility? It cannot be that big a deal.
We now have been unable to use our expensive iPad for about 4 months or more. What the heck am I supposed to do? Throw it in the trash take the huge loss as a life lesson to not bother paying Apple prices for stuff that only works for a few months before some glitch or software issue makes it unusable without having to buy a new unit or pay someone to keep trying only to hear '...sorry, call someone else...'*
*Same thing happened with my perfecctly perfect dual G5 tower...motherboard burned out for no reason. Paid 1200 to replace that...then a year later the other main board fries...on a computer that barely ever got used...ended up having to literally give it away on Craigslist and buy a new iMac...which then made all my expensive music software and projects unusable. So I have about three years of special music project files sitting on a harddrive that will never be able to be used.
...I'm beyond frustrated since all we wanted the iPad for in the first place was to be able to check some websites and emails...help me help me.

If the iPad works on other Wi-Fi systems then I'd have to agree that it is your own router causing the problem. To be sure take your iPad to a Starbucks or your library and a few other places than have Wi-Fi and test it out. If it works in those locations you'll need to talk to Comcast some more and be assertive. Something could have failed in your router.
Regarding your hard disk full of music. Put it in an enclosure and connect it to your Mac. Other World Computing sells all sorts of hard drive enclosures that you can install your drive in.
Computers can be frustrating but solutions are sometimes just around the corner.

Server Admin refuses to connect, servermgrd runs but no ports are open

Server Admin refuses to connect to server when run locally or remotely. Upon investigating, servermgrd seems to run but when I run network utilities and port scan the server, neither port 311 or 687 are open. All other services appear to be running fine. No firewall is running. Server Monitor also has the same problems but WorkGroup Manager seems to work fine.
About 3 weeks ago, I had the problem and after trying many things, I did a clean install but the problem has reappeared after a few days/weeks.
At some point, servermgrd was crashing with a message about NSURL.... (lost and forgot the exact message).
-Tried to remove all the files in /private/var/servermgrd/
This solved the crashes but it now runs without opening the ports. After starting, it doesn't run away and consume any CPU.
Could not locate in system.log, console.log and servermgr.log any error messages indicatind something is wrong with servermgrd.
The log does show that server names are coherent.
Apr 18 23:06:31 server-1 servermgrd: servermgr_dns: hostname and DNS entries for this server are synchronized
- Tried rebooting.
- Tried running servermgrd with various flags, including alternate port but nothing happen. In fact the alternate ports do noot seem to get open. Even passing faulty options, it runs without complaining !
- Tried to reinstall the admin tools
- Tried to remove keychain paswords entries
- Tried Disk Utilities repair permissions.
Searching the posts, found somebody talkingabout servermgr_ctl
I'm starting to suspect some hardware failure (RAM).
Any suggestion how to test the ram.
Running out of idea.
Desperate for solution.
Background
OS X Server 10.4.9
Server Admin version Version 10.4.7 (157.8)
Xserve Dual G4 with 2 GB ram. Mac OS X (10.4.9)

Ok, I ran memtest 4.2 and discovered the ram was failing, In replacing the dimm, they started working again so it may have been a mis-seated dimm module or some oxidation on the contact. My file system was already corrupt despite it being a fresh install. Then I checked and notice that the file com.apple.servermgrd.plist in Library preferences was gone. Either I stuppidly deleted it trying to fix the problem or it was hosed by the memory/file system corruption. Anyway, I copied it from another server and Both Server Admin and Server Monitor are now working.
SOLVED.
PS: in view of this event, once I'm satisfied the memory issues is solved, I'll do again a clean install. Who know what else was corrupted.

Error in Ultra Search in portal. listener refused the connection

hi
I implement a portal.I wanted to use ultra search(portlet) in my pages. so I defined an user and graned access to him. I created a provider for ultra saerch and schedule too. then add ultrasearch in page. it worked currectly but now give an errr such this :
oracle.ultrasearch.query.SearchException: WKG17005: connection failure: Listener refused the connection with the following error: ORA-12514, TNS:listener does not currently know of service requested in connect descriptor The Connection descriptor used by the client was: //IP Server:1521/ORCL
How can I solve this problem?
please help me

Went to the control panel administrative tool and services
After I did that I got this error Failure Io exception The Network Adapter could not establish the connection
Also, I got this in the command prompt
lsnrctl service
LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on 07-JUL-2012 15:35
:19
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=co-67349b991dc4)(PORT=15
21)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
lsnrctl start
LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on 07-JUL-2012 15:37
:41
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Starting tnslsnr: please wait...
Failed to start service, error 1053.
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on 07-JUL-2012 15:40
:27
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=co-67349b991dc4)(PORT=15
21)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error

I have an ipad and it's been refusing to connect to the wifi lately no matter where I go, anyone know how I can fix it?

I have an ipad and it's been refusing to connect to the wifi lately no matter where I go,
it used to work and then all of a sudden it wont.
i type in the password and it comes up with 'unable to connect to wifi'
anyone know how I can fix it?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Java.sql.SQLException: Listener refused the connection with the following error: ORA-12514, TNS:listener does not currently know of service requested in connect descriptor

Good Day,
I'm encountering this problem
     java.sql.SQLException: Listener refused the connection with the following error:
     ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
here's the java code
Class.forName("oracle.jdbc.driver.OracleDriver").newInstance();
String url = "jdbc:oracle:thin:@//10.143.85.21/UCSL";
String userName = "mssoriano";
String passWord = "mssoriano_4319";
conn = DriverManager.getConnection(url, userName, passWord);
and here's my tnsnames.ora
UCSL =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = 10.143.85.21)(PORT = 1521))
    (CONNECT_DATA =
      (SID = psusldb11)
Please do let me know if what may the cause of the problem and how to solve this. Thank you and God bless.

Hi,
see this example
Connect to Oracle DB via JDBC driver
Frank

Facebook and Twitter are refusing the connection

Hey there,
for two days I'm using Mavericks now (I came from a windows-PC) and I just wanted to add my facebook- and twitter-accounts to the "Internetaccounts" (I don't know if they're called this way in the english OS, therefore I`m sorry if not). But they refuse to connect and keep saying that my username or password couldn't be checked, as you may see here http://i.imgur.com/CoQkhRp.jpg (sorry for the german, again)
There are no typos in the usernames or passwords, I even get Messages of facebook, that the macbook is accessing my account, but the macbook keeps refusing the connection.
I hope anyone could help me

Same problem here. Read on another thread to update Java, but that didn't work either. Seems like a bug only affecting some installs. Do you have a kernal panic when you click the Share button in Safari? Can't seem to figure it out and seems we are waiting on an update...

Airport refuses to connect to dlink router

When I try to connect to dlink (WBR-1310) network, Airport gives me a message "There was an error joining the AirPort network dlink" after I enter my password. I created my password with the help of a dlink technician and they have no clue why it would not work. If I do not password protect my network, it works, but I do not want to go unprotected. Any suggestion? Thanks much.
Yvan

danycom, Welcome to the discussion area!
When you say "Airport refuses to connect to dlink router", do you mean that you are trying to get an AirPort Express (AX) to connect wirelessly to the router? Or do you mean that you are trying to get your Mac to connect wirelessly to the router?

Database: Listener refused the connection -please help

middlegen:
[middlegen] Database URL:jdbc:oracle:thin:@localhost:1521:PUSSDB
BUILD FAILED
C:\cvs-1-11-17\middlegen\samples\build.xml:232: middlegen.MiddlegenException: Couldn't connect to database: Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
localhost:1521:PUSSDB
Total time: 8 seconds
C:\cvs-1-11-17\middlegen\samples>

Did you try a tnsping to see if it can provide name resolution? Can you connect to the database using the connect string service name such as sys@pussdb? These would indicate whether the database has been properly defined in your databse names resolution method (e.g. tnsnames).

OBIEE 11G - The database Weblogic is trying to connect to is refusing the connection.

Hi,
The database Weblogic is trying to connect to is refusing the connection, per my error messages. Which file will have the JDBC connection information?
Thanks for your time and help.

Can u paste the error log messages?

Since installation of last 4.0b12 version, I'm unable to connect to any https site through a proxy. Connection works if no proxy is involved, with proxy I receive a message like "proxy refuses the connection". Thank you for your answer

I'm connected to a customer's network and I have to use a proxy.
I correctly authenticate myself to the proxy and I try to access https://mail.google.com.
I receive a message that the proxy refuses the connection.
I noticed that this happens with all the https sites.
If I connect with my mobile internet key without proxy, I'm able to connect: the combination of proxy and https is failing.
Other computers on the same network with different browsers can connect to https through the proxy.

I'm working with the Firefox development team on this one. As far as I can tell, they seem to think that there are 2-3 different problems with the same/very similar symptoms, all involving proxies. They think they've fixed them all for RC1.
Right now, it looks like we just want people to test an early build.
You can get that here:
[http://ftp.mozilla.org/pub/mozilla.org/firefox/nightly/2011-03-03-12-mozilla-central/firefox-4.0b13pre.en-US.win32.installer.exe]
Install that somewhere (not in your current install directory), quit all open Firefox instances and try it. Let me know if it works.

Error 10061 refused the connection

The error 10061 connection refused appear me trying to connect 2 applications in the same machine. I switched off the firewall for testing but there were no difference. The OS is W008 64bit. What could be the problem? Thank you in advance

hi,
Please refer to the articles below to get more information about this error:
http://social.technet.microsoft.com/Forums/forefront/en-US/f2f4eea6-a020-4837-90c9-b5bc0a555513/error-code-10061-connection-refused-when-connecting-to-websites?forum=Forefrontedgefirewall
http://www.chicagotech.net/msapps/isa2.htm
http://forums.isaserver.org/Error_Code_10061%3A_Connection_refused/m_2002027419/tm.htm
Best Regards
Quan Gu

IPhone 3G - iOS 4.2.1 - WiFi Refuses to Connect.

As it says... my iPhone 3G has refused to connect to the internet using Wifi.
Bit of history on it... It was a Telstra phone, and worked perfectly with WiFi, but since it was racking up unknown $3000 bills per month we decided to switch it to Optus, and it still worked fine.
Ever since we have swapped SIM Cards, or upgraded to iOS 4+ the WiFi just refuses to connect. It will pickup the router fine, and will say its connecting but then say it cannot and I have to dismiss the notification.
Any ideas? Solutions? Workarounds?
Thank you in advance.

There is no solution available other than selling it and putting the money towards a new iPhone.
(77645)

Nokia E51 refuses to connect to Nokia BH800 blue...

Similar Messages

Maybe you are looking for