Nokia E6 display blank freeze

Driving back home today I noticed that whilst my E6 connected to my bluetooth handsfree, it didnt change profile to car but remained on default. Usually it does as I set it in the accessories options. Anyway I heard a new sms arrive and soon after stopped at home and went to check. I tried unlocking the phone both with pressing the d pad and flicking the side slide, but the display remained blank. I tried the power button and again nothing. I eventually resorted to removing the battery and rebooting. Seemed ok. Not sure why it did this? Anyone else had similar?

Hello I purchased my nokia e6 on 8th september 2011 and since then the phone keep freezing up on me. I started using skype two days ago and the phone turns black and its frozen. And it restarts or i have to force restart it. Please help...is there a update for this problem?

Similar Messages

My nokia N-70 Music Edition Screen displayed blank...

Hi
nokia N-70 Music Edition Screen displayed blank after few hours.After Removing battery,put again & start it becomes ok for few hours.I have already updated the Software Nokia N-70 but no advantage.
Wht should i do?

strange enough some of the pre-installed apps on the N70 are on the memory card and not the phone memory. which means formatting the memory card will remove everything. it's difficult to get everything back but try these :
1- try to find what you need on the n70 support page
http://europe.nokia.com/A4144775
check phone software.
2- if you have the download app installed on your phone , run it and check for the app there.if not check the nokia download store. http://www.download.nokia.com/
3- if your mamory card is not the original provided with the phone, locate your old memory card. using a computer copy and paste the following folders from the old original one to the new one:
* resource
* sys
* private (copy the subdirectories only and not the whole folder)
4- if something is still missing after all this, i guess it's gone for good
Fear not those who argue but those who dodge

Report is displaying blank?

hi all
my report with less parameters is working fine but when i increased parameters its showing me report can anyone guide me plz.its displaying blank page
here is my codes:
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
plid ParamList;
vParamValue number;
BEGIN
plid := Get_parameter_List('tmp');
IF NOT Id_Null(plid) THEN
Destroy_parameter_List( plid );
END IF;
plid := Create_parameter_List('tmp');
add_parameter(plid,'P_num',text_parameter,to_char(:pays.num));
add_parameter(plid,'p_code',text_parameter,to_char(:pays.code));
add_parameter(plid,'p_basic',text_parameter,to_char(:pays.basic));
add_parameter(plid,'p_housing',text_parameter,to_char(:pays.housing));
add_parameter(plid,'p_water',text_parameter,to_char(:pays.ele_water));
add_parameter(plid,'p_transport',text_parameter,to_char(:pays.transport));
add_parameter(plid,'p_desc',text_parameter,to_char(:pays.description));
add_parameter(plid,'p_amount',text_parameter,to_char(:pays.amount));
add_parameter(plid,'p_deduct',text_parameter,to_char(:pays.deduction));
add_parameter(plid,'p_net',text_parameter,to_char(:pays.net_amount));
add_parameter(plid,'p_total',text_parameter,to_char(:pays.total));
add_parameter(plid,'p_other',text_parameter,to_char(:pays.other));
add_parameter(plid,'p_money',text_parameter,to_char(:pays.money_in_words));
add_parameter(plid,'p_num2',text_parameter,to_char(:payslip.num));
add_parameter(plid,'p_name',text_parameter,to_char(:payslip.employee_name));
add_parameter(plid,'p_gender',text_parameter,to_char(:payslip.gender));
add_parameter(plid,'p_nat',text_parameter,to_char(:payslip.nationality));
add_parameter(plid,'p_martial',text_parameter,to_char(:payslip.martial_status));
add_parameter(plid,'p_date',text_parameter,to_char(:payslip.join_date));
add_parameter(plid,'p_job',text_parameter,to_char(:payslip.job_title));
add_parameter(plid,'p_bank',text_parameter,to_char(:payslip.bank));
add_parameter(plid,'p_account',text_parameter,to_char(:payslip.account_no));
add_parameter(plid,'p_year',text_parameter,to_char(:payslip.year));
Add_parameter(plid, 'PARAMFORM', TEXT_parameter, 'NO');
repid := FIND_REPORT_OBJECT('REPORT6');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER, 'paramform=no');
v_rep := RUN_REPORT_OBJECT(repid,plid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://sara:8889/reports/rwservlet/getjobid'
||substr(v_rep,instr(v_rep,'_',-1)+1)
||'?'
||'server=repserver&P_num='||:pays.num
||'&p_code'||:pays.code
||'&p_basic'
||:pays.basic||'&p_housing'
||:pays.housing||'&p_transport'||:pays.transport
||'&p_water'||:pays.ele_water||'&p_amount'
||:pays.amount||'&p_deduction'||:pays.deduction
||'&p_netamount'||:pays.net_amount
||'&p_total'||:pays.total||'&p_other'
||:pays.other||'&p_word'||:pays.money_in_words
||'&p_num2'||:payslip.num
||'&p_name'||:payslip.employee_name
||'&p_gender'||:payslip.gender||'&p_nat'
||:payslip.nationality||'&p_martial'
||:payslip.martial_status||'&p_date'
||:payslip.join_date||'&p_job'
||:payslip.job_title||'&p_bank'
||:payslip.bank||'&p_account'
||:payslip.account_no||'&p_year'
||:payslip.year||'&paramform=no','_blank');
END;
Edited by: SarahSarahSarah on Aug 16, 2009 4:20 AM
Edited by: SarahSarahSarah on Aug 16, 2009 4:23 AM

sarah,
Check the query in the report. The reason for blank report will be the query returning blank. So check the report's query in SQL *PLUS or other softwares like TOAD, SQL Developer etc.
Regards,
Manu.

In my Iphone 5, Nothing on my App Store is working its displaying blank (Except for Genius section). I've tried to uninstall and install itunes and all its component but still it doen't fix. Not sure if its problem with apple servers. Someone help please!

In my Iphone 5, Nothing on my App Store is working, its displaying blank (Except for Genius section). I've tried to uninstall and install itunes and all its component in my desktop but still it doesn't fix the app store issue. Not sure if its problem with apple servers. Someone help please!

settigns>itunes and app store to make sure you are signed in.. If you are, you will see your account name..... anyhow, click your account name, sign out and sign back in
also go to to settings>general>reset and reset network settings... if that doesnt work settings>general>reset and reset all settings!
one of those shall work. The last step would be to restore your device (apple.com/support) HT1414

My NOKIA LUMIA 720 -Screen freeze & Automatic fast...

My NOKIA LUMIA 720 -Screen freeze..Automatic fast screen touch working without my input
Since yesterday, i am facing this issue. Its 1 month old mobile.
Today i scared alot with my phone working, because my lumia 720 home screen is automatically working with out any of my input. i had seen 3 to 4 times, it struck off all once and it stands on Calculator screen or messge inbox scrren.
Some times, it automatically asking for deletion of contacts & it is asking for link of contacts to one another & it is automatically going for a new message and asking for some file attachment addition.then i feared alot and i switch off the phone immidiately.
What if, any of my images or personnel files went to a wrong person.
Please suggest any of you, what to do now.

M too having this problem.. tried soft/hard reset but no use.. updated every system and app still no use.. I dont even droped my phone that could be the cause of this f*****g problem. Now the down touch not working. but after 5 to 6 hrs of rest it started to work insanely like you said. I cant even use my phone and sometimes the call been ended coz of this stupid problem -_-"

Email received on BT email display blank content

Hi,
The email received fron certain domain on BT internet mail display blank content. Has anyone come across the problem? Let me know how to solve.

I am getting the same thing - going to post about it shortly as I don't know the solution either.

Nokia C7 Display Scale lines on the Display (Known...

Hi,
On Nokia C7 Display there is scale lines on it, It more visible on white background.
Kindly some one help me on this.
1. Is this a known issue ?
2. Is this a display problem ?
3. Is this a Software Bug ?
Even the replaced display have same scale lines on it.

Same on my C7. I noticed it when I buyed my C7 Dec.2010. Meanwhile becauso of the purple tint I received my money back. When I buy new C7, I'll drop here some info about it.
Now I'm waiting at Anne FW to be in new devices.
Nokia 701
(RM-774, Symbian Belle, 111.030.0609)

Nokia C7 Display Defect

Hi,
I have a Nokia C7-00 that was purchased SIM free and unbranded in Germany, with which I'm experiencing distinct colour banding / gradient problems. It is also common on Nokia N8 displays. I'll try to describe my problem:
The first tell tale sign of the issue seems to be a common one: A purplish tint on the top half of the screen saver clock (visible when the phone is keylocked and then the menu key is pressed).
As time has passed by since first noticing this problem- I have also noticed that videos and images that are predominantly dark are also having issues being displayed properly. The effect being similar to if the image was being shown on a screen with limited colours, for example, if you set your computer screen to display only 16bit colours. In areas of images that black is supposed to fade into lighter colours, the image is completely off.
There is an active discussion about this problem on another forum:
http://www.nokiausers.net/forum/nokia-n8/39462-i-think-nokia-using-two-different-types-screen-n8-may...
I have attached pictures of my screen with the problem.
I have contacted Nokia care and they have no input other than re-installing my firmware (which is impossible to do anyway- as they seem to have provided me with inaccurate instructions- there is no way to re-install my firmware via Ovi Suite or the handset)
Any help?
I've since moved away from Germany and from what I understand my 2 year warranty is only valid in Europe...
Attachment 1 is supposed to be black to white squares in increasing gradient
Attachment 2 is supposed to be black into white, but on my display somehow a brown/purple tint is in between the black and white
Attachment 3 is the screensaver clock that is supposed to be black, but on my screen the top half is displayed with a purple hue
Here is an image of two Nokia N8's from someone experiencing the same display characteristics as my C7, and one with a good display. The problem can be seen better in these images:
Nokia N8 Display 1
Nokia N8 Display 2
Attachments:
DSC00256.jpg ‏10 KB
DSC00260.jpg ‏7 KB
pic.jpg ‏7 KB

hi guys my n8 has this issue too
iam not impressed by it and have contacted nokia on facebook , twitter , email and phone yet they dont seem the least bit intrested at the minute
i have even got a nokia tech from a nsc to report it to them via correct channels yet nokia dont seem to care about this
it happends when colours fade into each other or get lighter , main colours are white/grey/black and these turn to a purple/red colour just like in the pictures above
ive also had another n8 and it didnt have this problem , my girlfriend has a n8 too and is on the same product code etc and the screens are so different it is unreal
i thin nokia might be using two screens on the n8 too meet demand as amoled screens are in demand at the minute so maybe they have sourced another froma differnt amoled maker
i cant see any other reason for the difference in image quality between my girlfriends and my screen , same product code , same firmware , same theme and settings yet the results are so different its worrying
forget using the n8 to watch videos if you have one of these screens with a purple tint as the blacks/whites/greys will look purple and ruin the film etc
my video playing has gone from watching dvd quality to watch a dodgy pirate with pixelation and purple tints and banding
id like to see more users post up here so nokia can see there is a bit of a problem and start looking into it as at the minute they dont seem fussed
perhaps people havent noticed the purple tint but if you have seen one with a proper screen and then one with a puple tint you can easily spot the difference the screen quality is no where near as good as the ones without tints , coliurs are deeper richer and nicer to view on the screen wihout the tint
iam waiting for another n8 to turn up today as a replacement if it has the purple screen too i will be extremley gutted and a unhappy n8 user even though its my dream device itll feel tainted because of the screen

My 6070 navigation display blanks out after 5 seco...

My 6070 navigation display blanks out after 5 seconds. Not enough for a 'silver surfer' I am not able to find the adjustment, and it is not in the handbook. Can anyone help. Many thanks
Solved!
Go to Solution.

A reply from service would indicate this a feature of the 6070, back light being turned off. The time out cannot be altered. This feature is unsatisfactory as it times out too soon for slow fingers!

XL Reporter Do Not Display Blank Records

hey all,
I've built a standard P&L Budget report in XL Reporter with parameters for each segment of the account code as made possible by patch 02. However, when I uncheck "Do not display blank records," the generated report lists an instance of each account for each segment that I've chosen in the parameters.
The selections for the account segmentation don't seem to filter the accounts themselves, instead they filter the balances of each account. Does anyone know why it only filter's the balances rather than the accounts themselves and ends up repeating the accounts for each segment selected? Is this a bug?
thanks in advance!
Kevin Lee

Hi Kevin,
Seems that noone in this forum can answer your question. Maybe this is related to the fact that the main focus here is the SAP Business One SDK?
In case the question is still open:
I would recommend that you try these forums - which should fit better:
For SAP partners only there's a forum where you can discuss implementation questions etc.:
Got a question about customization / implementation? Maybe ask it in CPSN!
...and here's the SAP Business One Forum in the "SAP Community" (public to anybody):
Re: Got a question about customization / implementation? Maybe ask it in CPSN!
...or you might try your luck with SAP Support?
Bugs should anyway be reported to SAP Support!
HTH
Frank

TS1382 Display blank iPod nano 2nd gen

Display blank iPod nano 2nd gen

You may get better response if you post in the iPod Nano Community forum
or else hopefully this Apple Support Article on iPod Reset will help you.
Have a nice day!

Is it possible to have the lid open on a MacBook Pro connected to a Cinema Display and have the Mac display blank with the Cinema in highest definition?

Is it possible to have the lid open on a MacBook Pro connected to a Cinema Display and have the Mac display blank with the Cinema in highest definition?

Hi,
Create a play list that you wish to burn. Select playlist, the file from main menu which gives to an option to burn the playlist. A pop up box appears allowing you to select burn speed and disc format.
Jim

FAGLL03 : customer and vendor columns displaying blank

hi experts,
In FAGLL03 tcode , customer and vendor columns are displaying blank .
Is there any settings need to be done in SPRO for displaying the 2 columns .
kindly give me any suggestions.
thanks & regards,
Raghul

hi Radhika,
Thanks for your prompt reply.
I already defined table and field names as mentioned by you .
Also i checked FAGLPOSYEXT structure the two fields were appearing as it was not there previously.
When i checked by running FAGLL03 , the fields customer and vendor were appearing blank only.
Also i tried by executing the report BALVBUFDEL - for buffer reset.
Kindly give me any suggestions how to rectify this .
Thansk & regards,
Raghul

Display blank for # in Query Designer

Hello,
I am executing a query using Query designer. The blank characteristic are displayed as # in the report. I want to display blank instead of the #.
Please help me in this
Thanks in Advance.

Hello Shraddha,
in that case you will have to use VBA.
just copy the code mentioned in the above links in Workbook->Tools->Macro
Create a macro with name SAPBEXonRefresh for the workbook in which the output is needed as " " in place of #.
Hope it helps..
thanks,
(please dont forget the points...)

Nokia n95 display crash repair

Kindly help me to repair my nokia n95 display crash . How much it will cost in India. I am from Imphal.
Moderator note: E-mail address removed.
Message Edited by wildreamer on 01-Nov-2009 06:36 AM

Contact your local Nokia Care Point and request a quotation.
You can find your nearest Nokia Care Point at:
For UK
http://www.nokia.co.uk/A4228006
For Europe:
http://europe.nokia.com/A4388379
For Asia-Pacific
http://www.nokia-asia.com/A4416070
Elsewhere:
http://www.nokia.com select your country, go to the support section, then select repair.

Nokia E6 display blank freeze

Similar Messages

Maybe you are looking for