Nokia E6 flashlight problem during call conversati...

Hi,
My new Nokia E6 have a problem, If I turn on the flashlight and make a call, then after some time when the flashlight turns on automatically with default time out period, then it wont turn on again, it just blinks and stays off, but If i disconnect the call, it works normal, but then again it wont turn on with call converstaion.
I want to know if this problems is just with me, or anyone else is having the same issue?
Thanks

HI
That needs some clarification. You turn the flashlight ON amd then make a call? I can't imagine the phone being able to make a call with the flashlight on because it uses a lot of power.
hughm_nyksj_dk

Similar Messages

Hi I have a iPhone 4 and I seem to have a problem during calls. If I make or receive a call I can hear the person who is on the line with me but the other person can't hear me. This problem has occurred 1 week ago so please get back thank you

Hi I have a iPhone 4 and I seem to have a problem during calls. If I make or receive a call I can hear the person who is on the line with me but the other person can't hear me. This problem has occurred 1 week ago so please get back thank you

You use Restore to get the latest firmware build, not the Update button. You can only use the Update button, if there is an iOS update, say iOS 5.1.
this link talks about updating to 9A406 to fix the "No Service" issue with iPhone 4S:
http://iphone-and-i.blogspot.com/2011/12/fixing-iphone-4s-signal-problem.html

Nokia N70 Buzzing fault during calls

Purchased N70 yesterday and noticed during calls there was a buzzing sound. Will be returning for a replacement. Has anyone else had this problem? Only happens when the backlight is on. Any ideas how to fix this

I think this has been mentioned here before... as you're both within the return period - get them back and see if a replacement model will sort the problem.
If you were outside the return period, I would suggest taking it to a Nokia Service Centres as I don't think there was a solution mentioned.
I've noticed some interference when I'm on the o2 3G band with a poor signal - Is this when you're on dual mode? Maybe you could try switching it to GSM and see if you're still affected? Not that it's a great solution - but could provide better feedback to the suppliers.
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Nokia 5530 - turns off during calling

Hi!
I have a problem with my nokia 5530. If somebody calls me after i pick up a call, phone is turnig off. Same situation when im making a call. Only puting a phone in loudspeaker mode (or with headset) is solving that problem. I've tried a hard reset, updating, etc.
Please help I dont want to be sad on christmas.
Solved!
Go to Solution.

You're not alone - it seems there are quite a lot of 5530s with such a problem.
Here are links to some of the similar threads (you might find something useful):
/discussions/board/message?board.id=smartphones&thread.id=156140&view=by_date_ascending&page=10
/discussions/board/message?board.id=smartphones&message.id=182183&query.id=458600#M182183
I have the same problem - even went to repair center. They said it was some loose part/connector and it looked that phone was fixed - I was able to make/receive calls with it - for a day. Then the problem reappeared and tomorrow I'll go again to complain. I hoped it was some firmware issue - but it seems I got a malfunctioning unit - so I hope they'll replace it.
Therefore I advise you to send yours to repair.

IPhone 4 mic problem during calls

After upgrade to iOS 4.3.5 I found that mic (near dock connector) doesn't work all time (sometimes mic works fine, but not all time) during calls. Could be this software issue or this is hardware issue? And another question - how fix this issue?

I found this post http://www.mostlyblog.com/ios-4-3-5-bugs-list and it seems that this is a bug of firmware 4.3.5...I hope Apple will fix this issue as soon as possible, because this problem makes me crazy

Iphone 4 - big problem during calls - caller cannot hear me

Dear All,
I have a very big problem with my brand new Iphone 4. I bought it in UK and I'm using it in Poland with Orange sim card. Randomly, during calls (signal strength is not an issue in this case) my caller cannot hear me at all. I still can hear any single word but they think that call is finished (dropped). I did the restore but problem remained. Is there anybody with the same problem?

Saint1974 wrote:
Dear All,
I have a very big problem with my brand new Iphone 4. I bought it in UK and I'm using it in Poland with Orange sim card. Randomly, during calls (signal strength is not an issue in this case) my caller cannot hear me at all. I still can hear any single word but they think that call is finished (dropped). I did the restore but problem remained. Is there anybody with the same problem?
Hi Saint,
It is possible that the creen is activating during the call and your ear is touching the mute button. There appears to be a problem with the iP4's proximity sensor not always actuating when the screen is close to the ear - this can result is so-called 'face dialling'. There is an enormous thread dealing with this exact problem elsewhere on these forums:
http://discussions.apple.com/thread.jspa?threadID=2475509&tstart=15
Fwiw, I also suffer this problem.
Having said all that, maybe you problem is something else. Hope it helps.
Regards,
Richard.

Problems during calls

I have an iPhone 4 16gig on latest update.
My phone is becoming increasingly annoying during making calls.
The screen does not lock or turn off when in call mode. So my ear presses buttons like "loud speaker" "mute" "hold" ect ect. This makes it difficult to use my phone for calls. Which is annoying as i cant do my job properly. And its affecting my work relationships as people are getting frustraighted with these things happening.
I have tried pressing the power button to turn off screen when in a call but this terminates the call. I am sick and tired of this problem. Anyone have a solution?

I fixed it!!!!
Basically I had to reset all settings by going to settings, general, reset, reset all settings. Then phone goes off. Comes back on and it looked like it did when I turned it on for first time after ios 5 update. But I clicked restore as new iPhone. And i tried to make a call and it fixed it

Nokia N97 Repeated beeping during calls

Yesterday when i was making a call, the call conected and started to ring, but along with this came rapid repeated beeps from the handset as if i had dialed a wrong number or something, but the call conected and i was talking to the other person, but with these annoying beeps that were too loud to hold the phone to my ear to make the call worth while anyway. I hung up and tried again, same thing, tried different numbers and the same again. I switched the phone off and back on which seemed to have solved this, but is this going to be a recurring problem? It was only a few days previous to this that i couldnt make calls at all untill i swithced the phone off and back on as it made the same similar beep but not as loud and wouldnt connect to the other persons number, as if i had no signal, this got very frustrating as i was trying a few different numbers, then tried to call my friend next to me at the time and it called his number fine first time with no beeps. Has anyone else experienced this so far?
Ive been around 2 weeks without a bug on this phone and now this starts to happen, along with the alarm clock problem that happened this morning. I am still on firmware V11

carves wrote:
cgg123 wrote:
I am still on v11, waiting patiently for Nokia UK to release v12.
Chris
You dont have to wait for V12 since V2.0 is just around the corner (October) according to NW09.
version 2.0 will be releasing in october, if your phone is unlocked. if you got it on contract it wil be up to your carrier.
those beeps could be a result of the settings. not too sure where it is (don't own an n97), but in the call settings check if minute beeps are on (where the phone beeps every minute) its a feature i know some people use as a means of monitoring their call time.
everything happens for a reason
check out my blog @ http://mycellife.blogspot.com/

How can I fix no sound problem during calls since I have upgraded iphone 4 to ios 7?

Hi friends
Since I have upgraded my iphone 4 to ios 7, I am practicing too much problems regarding to sound:
- playing music has no sound at the same time no sound in during phone calls unless I open the speaker.
- sometimes sound in music and phone calls comes back for short period and then same problem occuring again.
I think and I beleave it is software problem and I feel that ios 7 have killed my iphone.
any one has any idea how to solve the problem or downgrading back to ios6

Try a reset: hold down the home button along with the power button until you see the Apple, then let go.

Weird audio problem during calls

I have a weird audio problem and was wondering if anyone else has had a similar problem or could help...
My wife and I both have iPhone 5's and sometimes (not all the time) when she calls me (or I call her), it connects, but no matter which audio input I choose (phone, bluetooth, speaker, headphones), I cannot hear her, but she can hear me... I hang up, call back (and when I call, there is no dialing sound, nor any other phone sounds) and it's the same thing. Sometimes restarting the phone works, other times I have to restart it 3-4 times before it'll work again. I try different things during these calls, like turning on/off bluetooth and/or wifi (pretty much anything I can think of that would make a difference), but nothing seems to help.
The (other) weird part is that after the last time of this happening, I tried calling my iPhone with my office phone and it worked fine, so then I immediately call my wife back with my iPhone and it was doing the same thing again. I called her back using my office phone and could talk to her fine...
This problem has been going on for a few months now and I have tried restoring the phone a couple times (and I am on the latest iOS) and sadly, that hasn't done anything to help... Does anyone have any ideas what is going on? I'd make an appointment for the problem, but since it doesn't do it all the time, I don't know what good it would do... But it is getting very frustrating!
Thanks for any help!
-Jason

Thanks for the response! It happened again yesterday... It seems to be happening more frequently in the past few weeks now.
I checked the link and have tried all of the things listed at one point or another over the past few months. I did just check my Carrier settings and it said it had updated (it's on 14.1), but I am not sure when that happened (could have been today, could have been after my last restore last week, not sure). I'll keep my fingers crossed that maybe that fixed it...
If it continues to act up, would you recommend that I bring the phone in to an Apple store or an AT&T store? I bought the phone through Apple, but my carrier is AT&T (and if you suspect that the problem may be with the cellular conection), maybe the AT&T store would be the better choice?
I really wish the problem would be more consistant or go away, cause trying to get the problem solved is driving me crazy!

NOKIA C3 pure static during calls

For the last few days, whenever my mom sends or recieves a call on the c3, the person on the other line hears nothing but loud static while my mom hears them clearly through the c3.
we have tried using a headset and that didnt work
Any suggestions would be appreciated THANK YOU in advance!!

Does it happen in all cases? If not & the phone isn't network locked u can try inserting other sim card. If it doesn't work then pls contact nokia care of ur region as it seems to b a hardware problem.
Please mark the post as solution if it solves your problem.
Current Device - Nokia Lumia 1020/920

Problem during calls!

when i am in a call the following issues appear-
1. a dim red light close to the speaker blinks continuosly during the call(is that a sensor? i dont know)
2. a small distortion or noise is heard.
3. the screen blacks out. ( i tried covering the light and then uncovering it and then sometimes the screen would lit up and i could use the functions, but most of the time its justs blank and unlit during the calls.
What is this??
Please help.

Where do you see this red light... is it the red LED at the top right of the 9720?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Nokia X2 Image Display during Call

Hello There,
On Nokia X2, if I assign an image to a contact and when I receive a call from that contact, I cannot see the image, it is being hidden by the call notification. Only 30% of the image is visible and that too is a widened image. Also, the notification msgs are occupying the whole screen. Overall, the display factor isn't that good from a user perspective, it needs to be enhanced at a high rate. I have few more issues and will discuss them in other threads.
Regards,
Praveen P

Jimmy, I have seen better on other Nokia phones and I would expect the same from X2 as well. As you, I am also a fan of Nokia phones but this isn't what anyone would expect out of it. And X2 isn't an entry level phone compared to other brands, I would say Nokia couldn't manage it well to release it with quality.
I tried changing the theme but even that isn't working, for any theme, the call display is same. Do you have any better theme suggestion?

Problem during call java class (model layer) from jsp page (view layer)

I created new Fusion web application so I have now to parts in the application navigator (model, viewcontroller)
I want to write java class in the Model part as following:
package persistence;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.PreparedStatement;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.sql.Statement;
public class DBManager {
Connection connection = null;
public DBManager() {
super();
public void init() {
try {
// Load the JDBC driver
String driverName = "oracle.jdbc.driver.OracleDriver";
Class.forName(driverName);
// Create a connection to the database
String serverName = Constant.DB_SERVER_NAME;
String portNumber = Constant.DB_PORT_NUMBER;
String sid = Constant.DB_SID;
String url =
"jdbc:oracle:thin:@" + serverName + ":" + portNumber + ":" +
sid;
String username = Constant.DB_USER_NAME;
String password = Constant.DB_PASSWORD;
connection = DriverManager.getConnection(url, username, password);
System.out.println("*");
System.out.println(connection.getCatalog());
} catch (ClassNotFoundException e) {
System.out.println("Could not find the database driver");
} catch (SQLException e) {
System.out.println("Could not connect to the database");
e.printStackTrace();
and wrote JSP page in the view controller part as following :
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<%@page import="persistance.*"%>
<% persistance.DBManager manager = new DBManager(); %>
<%@ page contentType="text/html;charset=windows-1252"%>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252"/>
<title>Browse</title>
</head>
<body>
<table>
</table>
</body>
</html>
but this I have the following error in the jsp page :type persistance.DBManager not found
my job is to build simple ADF application using JSF and java without any ADF faces or JPA or any another technology
thanks

Duplicate message.
type persistance.DBManager not found
Add a Dependency on the Model project in the View project. In Project Properties select the Dependencies node to add dependencies.
Edited by: dvohra16 on Jun 19, 2011 8:37 AM

Error PLS-00306 during calling PL/SQL function from Java

Hi all,
I am facing a problem during call of oracle PL/SQL function from java using CallableStatement.
I receive following error message.
java.sql.SQLException: ORA-06550: line 1, column 13:
PLS-00306: wrong number or types of arguments in call to 'EXPORT_HIST_ALARMS_FUNC'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
As per above error EXPORT_HIST_ALARMS_FUNC in oracle has this signature.
CREATE OR REPLACE FUNCTION EXPORT_HIST_ALARMS_FUNC(startDateTime VARCHAR2, endDateTime VARCHAR2, meType VARCHAR2) RETURN VARCHAR2 IS
END EXPORT_HIST_ALARMS_FUNC;
Above function I have called following way in java.
String sql = "begin ?:= EXPORT_HIST_ALARMS_FUNC(?, ?, ?); end;" ;
CallableStatement cStatement = null;
cStatement = connection.prepareCall(sql);
cStatement.registerOutParameter(1,Types.VARCHAR);
cStatement.setString(2,startDateTime);
cStatement.setString(3,endDateTime);
cStatement.setString(4,meType);
cStatement.execute();
msg = cStatement.getString(1);
Actually above function requires three input parameters and one return parameter.
During execution of above java code it throws SQLException and shows PLS-00306: wrong number or types of arguments in call to 'EXPORT_HIST_ALARMS_FUNC' error.
I have run this function directly from oracle with three parameters and run successfully and finally it returns string.
But I am unable to figure out why it doesn't run from above java code.
Please help regarding this.
Thanks.
Regards,
Shardul Banker

Try this:
String sql = "begin ?:= EXPORT_HIST_ALARMS_FUNC(?, ?, ?); end;" ;
CallableStatement cStatement = null;
cStatement = connection.prepareCall(sql);
cStatement.registerOutParameter(1,Types.VARCHAR);
cStatement.setString(1,startDateTime);
cStatement.setString(2,endDateTime);
cStatement.setString(3,meType);
cStatement.execute();
msg = cStatement.getString(1);Regards,
Martijn Teigeler
Edited by: mTeigeler on Oct 13, 2007 10:22 AM

Nokia E6 flashlight problem during call conversati...

Similar Messages

Maybe you are looking for