Nokia E6 - Where is the Access point setting for Y...

I have my Nokia E6 configured for my Corporate Email, MfE and it works fine.  In the settings for MfE, I see a setting for Access Point, where I choose Internet with Priority 1 as my Home WLAN and Priority 2 as my GPRS connection.
Then, I started to configure my private Yahoo mail, evertyhing is done, it works fine, but I do not see any settings for Access Point for the Yahoo mail..
Does this mean it picks up the settings from MfE??? 
Can any other NOkia E6 users or experts comment on this??

Hi Stuart,
To answer your question:
There is no shared secret for the ACS itself.
If the ACS is going to communicate with another device, you have to define a AAA client and define a shared secret.
ACS 4, used that shared secret to protect/secure the replication, in ACS 5, the replication secured with encryption and not shared secrets(hash).
Rate if useful

Similar Messages

  • Where are the default icon set for OSX located?

    Hi all. im new to osx and mac (like 2 weeks in) and really like it so far.
    I really like the folder icons with the stamped icon on them, like the downloads folder with the stamped down arrow, and the applications folder with the stamped A.
    Ive created a folder for my Work files which i'd like to add a custom icon too. i know how to change the icon, but id like to see what other 'stamped folder' icons are available in the osx iconset so i can change it to one of those for consistency sake.
    Anyone know how?
    Thanks

    The commands baltwo gave you will show all hidden files, as will TinkerTool, which you REALLY don't want to do! There is an enormous amount of visual clutter that will appear.
    A new command appeared in Leopard, I think, which made it possible to easily change the hidden bit for any file or folder, without need of the specialized commands from Developer tools. IF the hidden bit is the only problem this will fix it:
    sudo chflags nohidden /System/Library/CoreServices/CoreTypes.bundle
    Just copy the above and paste into the command prompt in Terminal, press Return, then type your admin password (it isn't echoed to the monitor in any way, so type carefully) and press Return again. The CoreTypes.bundle should then reappear.
    Francine
    Francine
    Schwieder

  • Access point setting

    anybody who can help me to figure out what's wrong with my point, every time i try to configure my access point setting, a message will display "setting: memory full. close some appliocations and try again" pls help me

    It is possible. If you give the phone at Nokia care they will also do a hard reset if required to do so. Therefore the risk is everywhere. If you have taken the full backup without problems there is small possibility of backup not getting restored if back-up and restore procedure is done correctly.
    If my post has helped you please click the white star on the right

  • N86 8MP, Nokia Email 2.1.0, Access point troubles

    I know that his has been an never ending saga. I just don't seem to be able to give it up.
    There is a well known issue about Nokia Email 2.1.0 not being able to define group access points.
    When I try to do that I am offered only particular access points or "None". This is ever so annoying as I have to manually change the access point every time I leave my home WiFi.
    I am aware that there are ways around this using connection manager apps (I tried several: Auto WeFi, Easy WiFi....  ) but I was not happy with the results. One of them even disabled me from editing my access points.
    It is weird that it is possible to define "Internet" as a access point for Exchange but not for normal e-mail providers.
    Some people suggested to setup acces point to "Default" while setting up a new email account. However, I've never seen this option.
    I think Nokia's terminology is so vague. What would be "Default" connection as opposed to "Internet"?
    In addition, in "Network Destionations" it is possible to define the "Internet" group as "Default" so this will be the same thing, or...??? Am I missing something?
    I stumbled upon this article that Nokia would release a patch addressing this access point issue.
    I spent hours searching for the patch to no avail. Does anybody know whether that patch exists at all?
    http://www.e71fanatics.com/2009/01/big-ooops-in-recent-nokia-email-version.html
    Having exhausted all possibilities I was thinking I could install Nokia Messaging 9.7. Apparently this version is compatible with S60v3 unlike the Nokia Messaging 10.2.
    I have no idea whether Nokia Messaging 9.7 was ever ment to be for N86 8MP but if not does anybody know whether the unsigned version could be installed instead?
    I would appreciate any piece of advice or suggestion.
    Alex

    Hello!
    I can't update my e-mail client via Nokia e52 internet browser.
    I enter address email.nokia.com, click download link. The application Nokia Email 9.07 has downloaded. After this the suggesting message to install Nokia Email 9.07 appears. But error appears after my agreement - "An incompatible version of this product is detected, and has to be uninstalled first"
    I have no possibility to uninstall detected Email, so I don't see any Email client in Application Manager.
    Nokia developers, please, fix this bug as soon as possible

  • How to configure the Access point 1602 that I just purchased

    Hi Everyone,
    Hope you can help. I just purchased a AIR-SAP1602I-A-K9 from one internet vendor. Along with it I also purchased an power injector. I tried to use it as a standalone AP. It does not come with any instruction and I am not good at Wifi config. Hope you can help... My setting requirement is very simple:
    - Create and broadcast SSID called MYCSL
    -  Does not need any authentication or encrytion... (is this open authentication?...so that people just connect to the SSID that the user can start to cruise internet without putting in any keys.)
    - The access point does not need any static ip assigned, instead, it gets an ip from one of my dhcp server in the network.
    - How do I connect my laptop to configure it via web http?
    May you tell me what need to be configured? Although this is a new product from a legitimate retailer... Cisco said they could not support it without any Starnet contract... as a consumer...they should give kind of grace period to support the new products...ANyway, hope you can help me here :)
    Thank you very much for your help in advance.
    Takami Chiro

    https://supportforums.cisco.com/discussion/12217126/access-point-air-sap1602e-k9
    Hi Takamai,
    Thanks for marking the answer are correct.
    Sorry to say I didn't understand your question. But reading through line I assume your trying to broadcast the SSID..If that is the case you could use "guest-mode" command under the SSID but if you have multiple SSID to be broadcasted then you will have to use "mbssid guest-mode"
    Hope that helps
    Regards
    Najaf

  • Where is the option to set a ToDo item to repeat? ...

    I imported some calendar entries from MS Outlook onto my 5800, of which most were set to repeat every month.
    Those items successfully repeat on the device but on creating a new ToDo item using the device's calendar app, there is no option to set repeating occurrence!
    Where is the option to set a ToDo item to repeat?
    Can anyone please help me with this as I do not want to have to keep re-creating items and / or using Outlook to create them then transfer etc.
    'Ta very much.

    Just found an alternative that I thought was possible but wanted to confirm.
    Set yourself up a Nokia account on www.ovi.com and set up an OVI Sync account. Sync the phone to the online account to start with.
    Then, using the online interface to OVI Sync you can create an event that can be repeated weekly among other things. Re-sync the phone and that repeating event will be entered into your calendar.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • LGBD390 blu-ray cannot find the access point of WRT160N/3.

    I have been trying to set up the wireless connection to be able to view streamed movies from netflix through my LGBD390 blu-ray player.  I have successfully connected the wireless router to my Embarq router.  When I check status, it says it is enabled and connection is o.k.  I have been on the phone with Linksys (and was charged $9.99 which did not solve my problem).  I also have chatted and so far that has not worked either.  I have downloaded the upgrade for the firmware.  No matter what I do, the blu-ray cannot find the access point of the router.
    Can you help?

    thank you for your responsse Wizzard, but there are things I need to change that I don't know how to do.  I have no idea  how to assign static ip, subnet and gateway on the blu-ray.  When I went to the link , it was actually for  adifferent router than mine.  I have a WRT160N/v3.  I also did not know what to put in the protocol.  and if I should just put the number in the beg. and ending.   I also don't think I have an ethernet adapter.  Maybe you could give me more information.  Thanks in advance.

  • Cannot associate with the access point error message

    We just got high-speed Internet installed at our house. We have a cable coming into the house that connects to a Linksys WAP54G router in our basement. We have two Dell Dimension computers that we installed Linksys PCI Wireless G Cards into. The computer down the basement is working just fine. The computer upstairs which is directly above the router worked fine the first day. The computer got powered down and upon restart wouldn't connect again. I did a system restore and it worked fine. Windows errored out yesterday, and now even after doing a restore, I cannot get it to connect to the wireless network. The error message "Cannot Associate with the Access Point" comes up. When you search for available wireless networks, none appear. Any ideas?

    Try connecting to the network using the Wireless Zero Configuration...just checkout on the right-hand side bottom of the screen pc right-click the Wireless network connetion icon...click view available wireless networks...click refresh network list...on the same list you will see Change the order of preferred networks...on top of the page click wireless networks...in preferred networks...remove each & every network...click OK. Now, once again right-click the Wireless network connetion icon on right-hand side bottom of the screen & click view available wireless networks...click refresh network list...now you will be able to see your wireless network..if its a secured network it will ask you for the wireless wep key...put in the key...where it says confirm the network key & click connect...it will be CONNECTED....and you will be able to go ONLINE WIRELESSLY!!!

  • Can not associate with the access point

    Greetings!
    I am just new here. I am trying to set-up a wireless connection from our linksys router. I recently purchased a linksys wireless internet receiver thru USB connection. Now, my problem is the pc that is supposed to receive a wireless connection is stating " can not associate with the access point". I am not too good about computers, that is why I am seeking you help.
    I hope I can hear from you guys.
    Thanks in advance.
    Cheers!
    Square

    Lets start with the bad news, no wireless connection. Good news, fixable.
    Make sure all your security settings on the usb adapter are correct. If router is set for wep set adapter to wep,and so on. Also check all your firewalls, in windows, and on any virus suites that you may have running. Try turning off all firewalls, other than router, and see if that helps. Also download the easy link advisor from the linksys home page. Make sure your ssid, and network names are set the same for router, and adapter.
    Stlbluesfan30
    Cisco Network Academy Student

  • HP Pavilion 15-p159na - Where is the keyboard backlight setting to switch this on?

    Can someone please tell me where to locate the keyboard backlight setting for the Pavilion 15-p159na laptop.  I want to turn the backlights on but cannot locate this setting anywhere.  Thanks.
    This question was solved.
    View Solution.

    There isn't a setting. On the keyboard of a notebook that has this feature it is on the F5 key.  It is the lit key in the following image from the keyboard of my current HP Product loan. It is the enable\disable backlight key.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • I have a Canon MX882 and more often than note get an error message saying the printer is not connected. I check the printer and the get the message that the access point is accessed. I have reloaded the software and it worked for awhile. Any ideas?

    I have a Canon MX882 printer and more often than note get an error message that says "Printer not Connected." When I check the printer itself, I get confirmation that the access point is connected. I tried reloading the software and that seemed to have solved the problem for awhile but I'm experiencing the same problem. Any ideas what is causing this?

    Did you delete all receipts with iDVD in the file name  with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/  folder before installing the new copy?  If not then do so and delete the new application also.
    Click to view full size
    Then install iPhoto from the disk it came on originally and apply all necessary updaters: Apple - Support - Downloads
    OT

  • Asking to enter a device password in the access point but I don't have an access point

    I installed the Intel Proseet Wireless Client and upon connection to my Linksys router a wizard comes up asking me to "enter the device password to my access point or external registrar".  It displays an 8 digit number in the device password field.  My only option at that point is to go "back", "next" or "cancel".  If I click "next" it eventually fails to connect to my wireless router.  I do not have an access point installed.  Only the router and cable modem.  Any suggestions would be appreciated.
    Message Edited by dougieg on 11-06-2009 05:12 PM

    If its asking you for the Access Point password when you are trying to connect to your Wireless Network, It means you need to input the Wireless Security Key which you have setup on your Router.
    When you are trying to connect to your Wireless Network and it ask you for the 8 digit password, you need to Flip your router upside down and below you will find a 8 digit pin number (0000-0000) it will be in these format. Just input the 8digit pin without (-) and click on Next and it will connect you to your wireless network. Once successfully connected to your Network wirelessly you should be able to go online Wirelessly from your Computer. 

  • Can I use the Ethernet Port for a computer when it is also used as a wireless network with an Airport Extreme as the access point for the wireless network

    Can I use the Ethernet Port  of the A1264 Airport Express to connect to the Ethernet port of a computer that does not have wireless capability when the Airport Express is also used on a wireless network with an Airport Extreme 5th generation as the access point for the network?
    I have AE 5th gen
    looking to buy (from ebay) the AEX A1264
    Various computers, printers and hubs for the network
    Is this possible to do?

    Bob, Thanks for the info. I have read different articles that said yes, but I wanted to make sure before I commit to buy. I have an older A1084 which I could not use the Ethernet port. I know at one point I was able to when I was on 10.4. Now that I am on an Intel processor and 10.8 I am going to have to upgrade some of my Apple wireless hardware.
    Thanks Again.

  • Where is the 8 points Mask in FCPX Ver 10.1 ?

    Hi there,
    I am on FCPX 10.1.
    Can I know where is the 8 points Mask in FCPX Ver 10.1 ?
    I tried locating in the Effects Panel but all it has under in the Keyer sub category is circle mask, image mask ... etc.
    But I cannot find the 8 points mask.
    Any ideas ?
    Thanks

    furrytoes wrote:
    There's also this one from Alex4D - has 4,8 and 16 point masks
    http://blog.alex4d.com/2012/03/06/mask-plus-fcpx-effects/
    Definitely works on 10.1 - I have a 16-point mask, using it, right in front of me
    How do I install it ? I do not have MTT and do not want to use MTT.
    It says "If you don’t want to use MTT, install these effects in Home / Movies / Motion Templates / Effects / Keying:"
    How do I do this ?
    Thanks

  • How do I see the clients that are connected to the access point?

    Hello,
    In Wireless Control System (WCS), how do I see all the clients that are connected to the Access Point? I can do a particular search that if I know the mac address. But what I really like to know is that which clients is connected to the network. That means it sould be able to show me, example, Client A is connected to AP 1. The problem in WCS is that I can't do that. Can some please advice how I am able to do this? Thanks.

    Two ways:
    First:
    Under monitor, go to Access Points, then chose the target AP and click on it to open a menu, go to the Current Associated Clients tab.
    Second:
    User the search tool on your upper right corner, type in the target AP name, execute the search, on the results, click view list, on the list chose you AP and then go to the Current Associated Clients tab.
    Enjoy.
    Phil.

Maybe you are looking for