(Nokia E63) date changes automatically one or two ...

Why the date of my phone (Nokia E63) changes automatically one or two days forward or backward at any unknown time (mainly after booting). I can find it after it boots and then rectify it manually again and again…
Thanks & Regards,
Narottam
India
Narottam Das
Kolkata, India

I am having the same problem; I checked in the settings and made sure it says "off" under "network operator time", but the problem's still there.
Any other ideas?

Similar Messages

Purchase Order Statistical Delivery Date changed automatically

Hi,
In the purchase order, when I go to change the delivery date, the statistical delivery date changed automatically.
I do not want to change the statistical delivery date.
Is there any User Exit or BADI to validate this?
Please suggest the same.
Regards
Amol Khochare

Hi
Is the delivery date get copied to statistical delivery date ?
For validation, please check BADI - ME_PROCESS_PO_CUST and Method - PROCESS_ITEM
From the interface - IF_PURCHASE_ORDER_ITEM_MM use method GET_SCHEDULES and subsequently from the interface IF_PURCHASE_ORDER_SCHEDULE_MM use method - GET_DATA to get schedule line details.
Let us know, if it helps.

Process order date changes automatically while saving the order

Hi All,
While creating a process order in COR1, system proposes the scheduled start date and finish date as current date (today's date), but while saving the order, the dates automatically changes to previous day's date (one day before). Can any one help in what config change needs to stop this auatomatic date change..? Thanks in advance.
Regards,
DS.

Dear,
I would suggest you to carrout Master reciepe scheduling and update the Inhouse production time to the material master, this would enable the basic start dates and sheduled start dates to be same.
If you dont want to carrout scheduling of order, then in OPUZ transaction for the plant/order type combination deactivate the check box for automatic scheduling.
Regards,
Prasobh

MS Project 2010 Start dates change automatically

Hi,
I hope someone can help with this project problem, its driving me insane!
I have a set of activities which have a start date of 01/09/2014, there are no predecessors to these tasks but there are successors, and a date constraint date (the project start date is 16/06/2014, and these tasks cannot start until 01/09/2014).
When I mark the tasks as 100% complete the dates do not change (as expected), however once I have saved the file and closed it, something weird happens. When I reopen the file the start date (not baseline start) of these tasks has changed to the project
start date (16/06/2014). The % complete is still reading 100% complete and the task finish date has remained the same.
These tasks are milestones and have no duration.
Another aspect that I have discovered is when I take out the % complete (and it returns to 0%), the start dates change back to 01/09/2014.
Can anyone tell me if I have a setting somewhere which I need to change as its driving me insane, the more tasks that are marked as 100% complete, the more tasks I have that change to the project start date, so the problem is getting worse as the days go
on!
Any help would be appreciated.
Thank you!

Do you have the Project Status date set correctly, and is it set for the correct date? If its set back in June and under File, Options, Advanced the Move flags are selected you would get the behaviour you mention.
Rod Gill
Author of the one and only Project VBA Book
www.project-systems.co.nz

One user receiving WINMAIL.DAT attachments from one or two domains

I have a single user in our organization that is RECEIVING WINMAIL.DAT attachments which contain PDF's from only one or two domains external to the organization.
Let me be clear that he is not sending out WINMAIL.DAT attachments to anyone. I have tested sending him RTF emails with a PDF attachment from an external address and he is receiving them just fine. We are running two Exchange 2013 servers in
HA configuration and this user is using Outlook 2010 for his email client. If he looks at these messages in OWA, they still have the WINMAIL.DAT attachment within OWA. I cannot find an answer for this anywhere, and this is not related to disabling TNEF on
our exchange servers. Does anyone have any ideas? I would really appreciate the assistance.
Thanks,
Dean

Hi
Did you try this article -
http://support.microsoft.com/kb/278061/en-us
If the above article did not help then you can try the following
1) Create an external contact for sender email address from whom the email is sent to the affected user.
Run the below command for that sender external contact
Set-MailContact "External Contact" -UseMapiRichTexFormat Never
Ask the user to send email once again to that affected recipient and see if it still occurs.
Most likely the latter should fix your problem.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you.
Regards,
Sathish

Equipment Master data changing automatically

Dear All,
this is weird but our SAP system is changing equipment's master data once it is created.
we have blocked all the possible chances of using T code "IE02-EQUIPMENT MASTER DATA CHANGE" at user end.
we are finding it very difficult to track because every time the equipment's action log displays new SAP ID's . we have checked with same ID but any where it is not possible for that user to have an authorization for IE02
it mainly changes the master data such as description/Manufacturer/Model number etc into some weird information. and this is happening at any time where in some cases it has been found that at 3:00 am or 4:00 am. we had also checked any background job is running at same timing but we couldn't found out any such case and this is happening without any prior notice so it is difficult for us also to monitor the same
if you have gone through same experience please share with us.
thanks
kiran

Kiran,
I fee that you must investigate through table CDHDR. Run Tcode SE16 --> Give value CDHDR --> Enter.
Here input values as under ( OBJECTCLAS, OBJECTID, USERNAME) and Execute.
In the output, you observe the values of fields TCODE, UDATE. You will come to know whether these changes are happening through IE02 or some other Tcode.
Also you should try without giving the USERNAME also. In this case you will get the lines of both normal changes and surprise change also in the output, where you are likely to find out what is happening.
In a similar way, you can investigate through table CDPOS also.
Jogeswara Rao K

Find/Change (Multiple Date Changes in one Find)

Hi ID geniuses, got a question for your gigantic brains.
This may or may not be an easy one...
I do a lot of production work and I'd like to create a Find/Change or even a GREP search that will allow me to change multiple blank dates at once).
the format changes from file to file and follows these 4 formats usually and all 4 formats could be used in one document.
XX/XX/XX (8 characters)
XX/XX/10 (8 characters)
XX/XX/2010 (10 characters)
9/26/10 - wrong date in place already. (6 – 8 characters depending on the month)
Instead of having 4 different searches, is it possible to do one search that look for any of these text formats and change them at once?
Any ideas/guidance will be appreciated.
Thanks for your time.

Piece of cake.
Of course GREP comes to the rescue. Enter this in your search field:
\b((XX|\d{1,2})/){2}(XX|\d{2,4})\b
and it'll find any of your examples. Wot Doth This All Mean?
\b     a Word break -- there must not be a word character before this entire expression. This means it'll ignore "XXX/XX/XX".
(     repeat group -- see below
( XX | \d{1,2} )     Either "XX" (exactly) or "a digit, 1 or 2". This means it'll ignore "XXX/XX/XX" (three exes), pick up "1/2/3" (one digit), ignore "123/123/123" (three digits)
/     A slash. Nothing special, except ...
)     .. since this is the end of the repeat group ...
{2}     ... we want twice the sequence "XX/" (or "digit/"), to match "XX/XX/" and every possible combo with digits as well.
(     oh yet another group. That's because ...
XX     .. this literal text ...
|     ... OR ... (hold on, I'm gettin' there)
\d{2,4}     .. two to four digits should be matched ..
)     .. in this entire group.
\b     Phew! A Word break to prevent it matching "12/34/56789"

Build view with data rows from one of two views.

Hello. I've got problem with PL/SQL.
I have built two PL/SQL views. Now I have to write a third
view based on the data from "view_1" or "view_2". "view_2" contains all data rows
but "view_1" contains special information. If the needed data rows (it's
always a tupel of two rows) are available in "view_1" i have to use these data.
Are they not available in "view_1" i have to get it from the second view.
I've tried it with the DECODE function and a procedure I've written but I think it's
the completly wrong way because I have to search for a tour_id and there are always
two shipments for one tour.
It looks something like:
>
SELECT
DECODE(FNC_OPERATION_INSTRUCTION_EXISTS(T1.TOURNO),0,
(SELECT SHIPPING_NO
FROM VIEW_SHIPPINGADRESS
WHERE TOUR_ID=TO_CHAR(T1.TOURNO)),
(SELECT SHIPPING_NO
FROM VIEW_SHIPPINGADRESS_OPERATION_INSTRUCTION
WHERE TOUR_ID=TO_CHAR(T1.TOURNO)) "SHIPPING_NO"
FROM
TB_TOURS     T1
WHERE
But for sure I've got the error "ORA-01427: single-row subquery returns more than one row."
because there are always two rows for one T1.TOURNO.
I think that it's a standard problem but I also think that I'm on the wrong way.
I will be very thankful for any hint.
Thanx,
Christoph

select col1,
       col2,
       col3
from (select (select decode(count(*),0,0,1) cnt
                   from view_1
                  where ...)) chk,
                 col1,
                 col2,
                 col3
           from view_1
          where ...) tab1
where tab1.chk = 1
union all
select col1,
       col2,
       col3
from (select (select decode(count(*),0,0,1) cnt
                   from view_1
                  where ...)) chk,
                 col1,
                 col2,
                 col3
           from view_2
          where ...) tab1
where tab1.chk = 0note: untested.

Conitional formattimg on group data change access report

I want to do apply a conditional format on an access report when data changes from one group to another.
So on the on format property of the report, the ordinary conditional method would be something like:
if [SomeField]=SomeValue then
do action A
elseif [SomeField]=SomeValue2 then
do action B
else
do action C
end if
what I want to do is:
If somefield changes data from one thing to another (ie the data in the field changes value at some point, without knowing what those values are)
do action A
end if
Thanks

Hi
Please have a look at the wiki Troubleshooting Issues with VS .NET Datasets and Crystal Reports.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Best practice UOM changes for one master data

Hello ALL,
What are the best practices must be followed while changing one master data UOM data.
for eg i have two UOMs respectively,
basic UOM = EA another one ia Alternative UOM CAR . 1 car = 10 EA.
now my master data team deleting this CAR via MM02 .
what are the follow up actions we should follow.
(1) for eg i have contract existed for thi smaterial as CAR
(2) I have many POs without doing GR
like wise can you list what are the impacts in the system.
how we can go ahead.
What are the best practices followed while this UOM changes for your customer.
br
muthu

Hi Ravi / tao
Yes . I am deleting alternate UOM CAR in mm02 .
I created a contract for that material in CAR .
my contarct also refered in source list.
share your views.
what happen to my open documents.
What happen to open documents ? .. System may not allow me to do GR right?
br
muthu

Nokia E63:no data cable.

I purchased nokia e63 on the first day of the launch. When i came home and opened the box i was disappointed, Nokia is selling a business class phone without a connectivity cable that's really unacceptable. I spent 1,200/- more on the cable. I purchased it from a nokia priority dealer but a got the cable without any box. How can i verify the cable i purchased is original? If Nokia give the cable in box then it will obviously be original and i wouldn't mind paying couple of thousands extra. It was really unacceptable. I am using a lot of nokia phones like Nokia N95 , Nokia N73 , Nokia 1650 but if i get this kind of disappointment from nokia then i have to go for some other brands.

i was to choose between e51 & e63...& e51 had a data cable included in the box while e63 didn't...thats what i came to know from the website...
after visiting the nokia priority shop...i got a confirmation to this...
then i visited another nokia shop, they said that red e63 has a data cable included blue one doesn't...thats coz blue one is more preferred by people...
i went to another shop to buy e63...they said that in new stock even blue ones have data cable included in the box...
unfortunately blue ones are out of stock...
i bought a red one, it came with a data cable...
regards,
anupam149
regards,
anupam149

My Mozilla Firefox Browser v15.0 open then some file loading and my desktop display automatically created folder name is old Firefox data then ask me chose two

''duplicate of https://support.mozilla.org/en-US/questions/936244 - locking this one''
'''My Mozilla Firefox Browser v15.0 open then some file loading and my desktop display automatically created folder name is old Firefox data then ask me chose two option 1st is Safe Mode or 2nd is Restore so i chose Restore and then open Mozilla Firefox Browser page Blank Black display page,
How can i do solve this error plz plz plz plz help me out what you say troubleshooting,error or issue.'''

Did you perform a Firefox Reset either by clicking the button on the Help > Troubleshooting Information page or via the Safe mode start window?
You may have gotten the Safe Mode start window as the result of not being able to start Firefox more than once after crashes.
See:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes
If you have submitted crash reports then please post the IDs of one or more crash reports that have this format:
*bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
*You can open the <b>about:crashes</b> page via the location bar, like you open a website.
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter
If you can't open Firefox then see:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter#Location_of_crash_reports
*http://kb.mozillazine.org/Mozilla_Crash_Reporter#Viewing_crash_reports
"Reset" creates a new default profile with a time stamp appended to identify it and tries to recover settings like bookmarks and history and passwords and cookies and auto-fill data from the old profile, but you lose data like extensions and other customizations.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Firefox 15+ versions will move the old profile folder to an "Old Firefox Data-##" folder on the Desktop that gets a number appended if you use reset more than once, so you can no longer use the profile manager to revert to the old profile.

Can OBIEE automatically update a filter if underlying data changes?

Suppose there is a saved request that shows some data set, and it uses the following filter: "Country_Name is equal to / is in USA".
Now suppose that the value in the underlying data source changes from "USA" to "United States". The aforementioned request would now return no data, since there is no "USA" anymore.
Other than changing the way the request was initially designed (i.e. setting the filter to use the Country_ID instead of Country_Name), how would you handle this case? Is there an approach to use in OBIEE that would handle updating the filter automatically? Is this simply bad report design? Do you build something into the ETL process that triggers some action (either manual or automated) if dimension tables are updated? I could probably do an XML Search and Replace in the catalog upon learning that the value changed, but I'm wondering if there is a better way.
Any thoughts?

First of all: The best way to avoid this is to use saved filters in your report... then you only need to change these filters, instead of every single report.
I don't think it is possible to automatically change the underlying filters of a report when data changes.
About ETL: when you implement a Type 2 Slowly Changing Dimension you will create a new record for the dimension when the value of a column changes, to preserve the history. This means you will get two records with two row_ids. In your fact table you will use the dimension's new row_id for new data.
For your report this means that it will give the same results for old data (because it filters on "USA"), but it won't show the new data, since it doesn't filter on "United States". So I don't think this ETL approach will solve your problem.
Maybe a Type 3 Slowly Changing Dimension can help you. This means that you will preserve the history in the same record, using 2 columns for example "Current Country" and "Prior Country". This can solve your problem because you will filter on the same records (which is not the case in Type 2 SCD). But it means you will get two country columns, which is not the most elegant solution maybe..
So maybe going through all your reports is the best way to solve your problem for now and encourage the report builders to use saved filters in their reports.
Regards,
Stijn

HT204053 I set up one apple id for icloud on my iphone and another apple id for ipad. I cannot use icloud to automatically sync the two.

I set up one apple id for icloud on my iphone and another apple id for ipad. I cannot use icloud to automatically sync the two.

How can I delete the incorrect apple id?

Automatic PO date change

Hi All,
Can anyone help me with this please. In our factory when we change schedule of top level produch (finish product) i.e. if we move fwd or back any product then we need to change dates of purchase order manually againes that moved product.
Is there any way that when we move product schedule then our PO dates are change automatically ?..
Regards
Ali

Hi Ramesh,
Thanks for answering, can we PO delivery date be changed automatically once we move order from top level and run MRP ??
your answer will be much appriciated
Regards
Ali

(Nokia E63) date changes automatically one or two ...

Similar Messages

Maybe you are looking for