Nokia E65 connected to a Aironet 1250
Hello, I have problems to connect my Nokia E65 to the new Cisco Aironet 1250 (draft N). I have tested the same cell phone with a 1121 and it works properly, but I can't associate it with the new AP. What can I do to check if the cell phone is compatible with 1250 AP series?
Thank you.
Hi, I have configured properly the nokia E65 with WPA2-PSK + AES-CCMP and it works. Also I have configured some Nokia E51 and N95 and both are working well. But now I have another problems with the E65. When I try to transfer a call to the E65 the phone restarts automatically. It can make and receives call, but it cannot receive a transfer call. I have the updated to the last version and no changes. The E51 and N95 work perfectly and receive the call without any problem. Has anyone the same problem?
Thank you.
Best regards.
Similar Messages
-
Unable to Connect to Cicso Aironet 1250
My office just bought the Cisco Aironet 1250 and I am task to set it up. Right now, I am unable to connect to AP even when it is configured as Open Authentication without encryption. Tried using both laptops and our products to no avail. The same laptops and products are able to connect to other wireless routers So far, only my Linksys Wireless-G USB network Adapter is able to detect it.
We are very puzzled by this because we are able to setup and connect to it initially. But when we try to reconfigure it to another setting, everything starts to fail. We have tried doing factory default.
The AP is connect only to a Windows 2003 Server running DHCP and IAS. Appreciate if someone can help me on this. ThanksHi All,
Here are screen capture of my configuration
http://img.photobucket.com/albums/v146/tiger3687/Cisco%20AP%201250/ExpressSetup.jpg
http://img.photobucket.com/albums/v146/tiger3687/Cisco%20AP%201250/Security-EncryptionManager.jpg
http://img.photobucket.com/albums/v146/tiger3687/Cisco%20AP%201250/Security-EncryptionManager.jpg
http://img.photobucket.com/albums/v146/tiger3687/Cisco%20AP%201250/Security-SSIDManager02.jpg
http://img.photobucket.com/albums/v146/tiger3687/Cisco%20AP%201250/Security-SSIDManager03.jpg
http://img.photobucket.com/albums/v146/tiger3687/Cisco%20AP%201250/Security-SSIDManager03.jpg
http://img.photobucket.com/albums/v146/tiger3687/Cisco%20AP%201250/Security-SSIDManager03.jpg
http://img.photobucket.com/albums/v146/tiger3687/Cisco%20AP%201250/Security-ServerManager.jpg -
I am having Connection Error in my E65 when I try to dial any number, however it still recognize network operator. Any clue?
I have a Nokia E65-1 but since day one I have had the "Connection Error" problem.
Basically quite often when I try to make a call I can't. I will repeatedly get "Connection Error" on my screen.
Or I'll be in the middle of a conversation (often with 3 Customer Services) and the phone will terminate the conversation.
I'm on the 3-UK network and the work-around above is not available. In the menu I get Menu > Settings > Network > Network Mode > Dual mode
So it is defaulted to "Dual mode" and there are no other options.
I have sent my phone away for repair twice:
1. re-flash done - no change
2. couldn't find an error with my phone
Then 3 replaced my hand-set with a second-hand E65-1 but I still get exactly the same problem.
3 have told me that it is a service issue and that they can't do anything about it.
I have used a friend's K810i with my 3-Sim and the problem didn't happen. Conclusively the phone and since I now have been given a different E65-1 I'm guessing all E65's have this problem or I'm just really unlucky.
Peachy!!Message Edited by areynolds on 29-Oct-200702:17 PM -
Re: Nokia E65 Connection Error
hello?? anybody there who knows why a Connection Error message appears when making calls?? I cant make or receive calls with my N70 phone..
Nokia..please pay attention to this..
thanksHi,
do you have E65 or N70?
however you can check here for the latest available firmware for your phone:
http://europe.nokia.com/A4577224
upgrade your phone to solve your problem.
NOKIA means:Night Of King In Alone -
Nokia E65 not connecting to isync
I'm trying to connect my nokia E65 to my mac (running os x 10.5) and isync won't recognise it. I'm not sure what the problem is. I'm using the data cable to connect and have tried connecting in pc suite and data transfer mode, neither modes work. I have also downloaded and installed the isync update from nokia for the E65. That didn't work either. Any help would be greatly appreciated!
I haven't tried to do it via the cable, but my isync works perfectly via Bluetooth, have you tried it that way?
-
Is there any possibility that an 8gb micro sdhc card to work on a Nokia E65?
Check it here: http://mea.nokia.com/find-products-en/accessories/all-accessories/memory-cards-and-cables/memory-car...
I note it's not there - your E65. So ask yourself this question: does your phone take 4GB? If yes, it will take potentially 32GB. The reason for that is that all microSD cards from 4GB onwards are microSDHC. If your phone is capable of accepting the lowest microSDHC available, it will be able to accept the highest - but for some software limitations. Good luck
Symbian connected me to the world, to my dreams.. Thank-you Nokia -
Dear all,
Your urgent help required. i was updating my nokia e65 and only 12 minutes where left when i had and electricity failure and my pc restarted. now my phone is not starting. please suggest as i dont have any nokia care center near by.urgent help requiredFirst remove the battery for 5 minutes, reconnect the battery, connect it to your pc and run the updater again. Leave it for a few minutes and it should go into recovery mode.
If not disconnect it and try a hard reset.
Hard reset:
1. Switch off the phone.
2. Hold down the following three buttons: Green (the call answer button), * button, and '3' button.
3. While holding these buttons, press the power button and switch on the phone.
4. Release when the phone shows the nokia logo or shows other signs of life like the language selection screen.
If that fails to fix it try the advice offered in this post by drummer27:
/discussions/board/message?board.id=swupdate&message.id=14152#M14152
If that still fails then the last option is to take the phone to a nokia care point.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair. -
Cisco Aironet 1250 - How to bridge two AP's and get Non-root to talk to Root AP
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:Arial;
mso-bidi-theme-font:minor-bidi;}
I have two buidlings acroos the street from each other. I have two Cisco Aironet 1250 wireless AP's with the first one going in the main building with network backbone. The Second AP goes across the street with the other wired network segment. Both AP's have long range antenas 2.4 GHZ on top of each building. I have configured the 1st one as the Root Bridge. The one across the street is configured as non-root bridge. I have both AP's configured with the same WEP key and also with the same SSID name with both set to broadcast it. I am still unsure and confused as to how I get the non-root bridge to talk to and use the root bridge to get on the main network.
1- It’s main to use the Root parent Mac address.
2- Is there another config that I am missing to get the signal?
Note: I still not getting any signal from the root although distance between root and non-root is 330m
My root antenna is AIR-ANT24120 and non-root antenna is AIR-ANT1949 and attached files is my configuration files
Thank you.1. How are the AIR-ANT24120 and the AIR-ANT1949 installed?
the AIR-ANT24120 is connected virtically on tower far 11m from the earth and AIR-ANT1949 is connected horizontally on tower far 10m from the earth
2. What is the distance between both APs?
350 m
3. Do you have clear line-of-sight between the two?
there is one tanker in the middle between them but it's far 7m from the earth
4. Is the two APs properly aligned?
i think yes and changed the aligned many times without any news (I don't have any tools for alignment)
5. Which point are the antennas connected to? Primary, Secondary or middle?
I tried in the primary and secondary but never tried the middle antenna
Thanks -
Aironet 1250 Configuration Help
Hello to all,
I'm an vmware\linux system administrator with very low skills in networking, I just bought 3 Cisco Aironet 1250 2.4ghz + 5ghz for my testing network and I need help to configure them.
Scenario:
1 - I have 3 Cisco Aironet 1250
2 - I want to create 2 wifi networks, SSID guest (vlan 11) and SSID production (vlan 1) in 2.4ghz + 5ghz
2a- I want to configure security WPA2-PSK without RADIUS Server.
3 - Aironet 1250 # 1 is connected to ethernet vlan1 (production)
4 - Aironet 1250 # 2 is connected to ethernet vlan11 (guest)
5 - Aironet 1250 # 3 is connected to ethernet vlan1 (production)
These are the first configuration commands found:
configureno ip domain-lookupline vty 0 4no exec-timeoutenableconfigure terminalinterface dot11radio 0encryption vlan 1 mode ciphers aes-ccmssid Productionvlan 1authentication openauthentication key-management wpa version 2wpa-psk ascii password1guest-modeend interface dot11radio 1encryption vlan 11 mode ciphers aes-ccmssid Guestvlan 11authentication openauthentication key-management wpa version 2wpa-psk ascii password2guest-modeend
When I try to set the repeater configuration webinterface tells me configuration errors.
Any help is welcome, sorry for my newbie!
Thanks a lot!Since each AP is connected via Ethernet, you don't need to set any as a repeater. Here are some links that show you what you need to have multiple SSID's and multiple vlans.
http://www.cisco.com/en/US/docs/wireless/access_point/12.2_11_JA/configuration/guide/s11ssid.html
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080665ceb.shtml
Tech Guides
http://www.cisco.com/en/US/products/hw/wireless/ps4570/prod_configuration_examples_list.html
Sent from Cisco Technical Support iPhone App -
I have an interesting problem. I have an aironet 1250. For months my wireless clients has been connecting with no problems. One day there was a power failure, don't remember making any chnages which I should of saved. After, all of my equipment rebooted with no problems. Now I'm seeing my 802.11N clients having connectivity problems. After 10 to 40 mins I believe they get logout, but the client don't get updated to this. The G and the B no problems. Some are Intel chip sets and some are apples base computers.
Anyone seen this?
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname blackhole
aaa new-model
aaa group server radius rad_eap
aaa group server radius rad_mac
aaa group server radius rad_acct
aaa group server radius rad_admin
aaa group server tacacs+ tac_admin
aaa group server radius rad_pmip
aaa group server radius dummy
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authorization exec default local
aaa accounting network acct_methods start-stop group rad_acct
aaa session-id common
clock timezone -0500 -5
clock summer-time -0400 recurring
ip domain name javabeans
ip ssh version 2
dot11 ssid JavaBeans
authentication open
authentication key-management wpa version 2
guest-mode
wpa-psk ascii 7 033E5D060F0EB78723C3E1815142B053225535E52754556204D116C577F784846032369512E0C40553B2301080C5219177A683E16
dot11 ids mfp distributor
dot11 ids mfp detector
dot11 ids mfp generator
power inline negotiation prestandard source
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption mode ciphers aes-ccm
ssid JavaBeans
antenna gain 2
speed basic-1.0 basic-2.0 basic-5.5 basic-11.0 basic-6.0 basic-9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
packet retries 128
station-role root
l2-filter bridge-group-acl
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 input-address-list 750
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio1
no ip address
no ip route-cache
encryption mode ciphers aes-ccm
ssid JavaBeans
antenna gain 3
dfs band 1 2 3 4 block
speed basic-6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
channel width 40-above
channel 5180
station-role root
no dot11 extension aironet
l2-filter bridge-group-acl
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 input-address-list 750
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface GigabitEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 10.5.15.1 255.255.0.0
ip helper-address 10.5.20.1
no ip route-cache
ip default-gateway 10.5.1.1
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source-interface BVI1
logging history size 50
logging history notifications
logging 10.5.20.1
snmp-server community java RO
radius-server attribute 32 include-in-access-req format %h
radius-server vsa send accounting
bridge 1 route ip
line con 0
session-timeout 30
line vty 0 4
session-timeout 30
sntp server 10.5.1.1
sntp broadcast client
endthis is what I got from the AP
2009-04-17 15:59:47 Local7.Info 10.5.15.1 214: Apr 17 19:59:46.885: %DOT11-6-ASSOC: Interface Dot11Radio0, Station blackhole 0013.e871.5b29 Associated KEY_MGMT[WPAv2 PSK]
2009-04-17 15:59:52 Local7.Info 10.5.15.1 215: Apr 17 19:59:51.969: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 0013.e871.5b29 Reason: Sending station has left the BSS
2009-04-17 16:00:55 Local7.Info 10.5.15.1 216: Apr 17 20:00:54.298: %DOT11-6-ASSOC: Interface Dot11Radio0, Station blackhole 0013.e871.5b29 Associated KEY_MGMT[WPAv2 PSK]
2009-04-17 17:04:56 Local7.Warning 10.5.15.1 218: Apr 17 21:04:55.640: %DOT11-4-CCMP_REPLAY: AES-CCMP TSC replay was detected on a packet (TSC 0x102313) received from 0013.e871.5b29.
2009-04-17 17:05:24 Local7.Warning 10.5.15.1 219: Apr 17 21:05:23.570: %DOT11-4-CCMP_REPLAY: AES-CCMP TSC replay was detected on a packet (TSC 0x10C31F) received from 0013.e871.5b29.
it looks like the clients reconnect 30mins later after, what ever happens. -
Aironet 1250 Overlapping Channels
Hi,
In my LAN, I have always been used an Aironet 1250 for internal use and always work fine. Now, I added a 3com AP but both AP are not correct. When I turned off the AIRONET 1250, the 3COM AP settings works fine. When both are turn on, the 3COM AP loses connectivity all the time.
I have heard about the overlapping channels in 802.11b/g networks.
Someone could tell me what I could do for solving this?
Note: Due to restrictions on my security lan, I could not use two SSID(using vlans) on my aironet 1250. This will be the best scenario, but it was not possible.
Thanks in Advance,
Fernandoyes. The Aironet 1250 connects to a DHCP server in the range 10.150.x.x and the 3com AP connects to a range 192.168.1.x. The DHCP servers are in different places and there is no any possibility that they could overlap one and another.
But I realized that the problem must be between the two access point because the 3 com AP got an IP Address from the range 10.150.x.x(it sounds crazyness but its true). Offcourse, soon the 3COM AP loses the connection.
Tks you very much,
Fernando -
Aironet 1250 in lightweight mode?
Can the Aironet 1250 802.11n WAPs be made to run in lightweight mode like the 1240's can?
Been poking around the cisco site and cant find anything that clearly says yes or no.
thanks
e-Y'sure can. Here's a link to show you how it's done:
1. The EASY way:
Upgrading Autonomous Cisco Aironet Access Points to Lightweight Mode
www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html
2. The CLI way:
Requirements:
⢠Image file (The recovery file has the prefix ârcvâ in the image name, such as c1200-rcvk9w7-tar.122-15.JA.tar);
⢠AP is connected to the Wireless LAN Controller; and
⢠AP can ping the TFTP server where the image is located.
Procedure
1. Copy the recovery file to the AP using the following command:
archive tar /x tftp:/// flash:
2. Let the AP boot on this image:
boot system flash://.bin
3. Reboot the AP.
OPTIONAL
⢠DO NOT ALLOW THE AP TO JOIN THE WIRELESS LAN CONTROLLER.
⢠IF POSSIBLE, type the following commands:
ï¾ clear lwapp private-config (This will bring the AP to factory default.);
ï¾ clear lwapp ap ip address
ï¾ clear lwapp ap hostname
ï¾ clear lwapp ap controller ip address
4. Let the AP connect to the Wireless LAN controller.
OPTIONAL
If an AP refuses to join the Wireless LAN Controller, type the following command from the AP:
lwapp ap controller ip address
Hope this helps. -
Hi all!
First of all sorry for my bad english.
I buy a Nokia e65 "internet limited edition" on vodafone and when I try to upgrade with Nokia software updater says that:
Connected phone was not recognized.
I can use the pc suite but can`t upgrade. Why?
Can anyone help me?Hello karma,
Sincerely, besides the minor speed improvement, didn't notice any more improvements.
At the Nokia Care Point they told me this firmware was mainly bug corrections and some adjustments, so it would not be noticeable to the end-user (besides some battery managing improvements, more stability and as I mentioned, the small speedup).
As I never had major issues with firmware v2, to me it really didn't change much.
Cheers -
I have an E65 and tonight I was completely unable to make any calls in an emergency situation (WORST situation to not be able to make calls in). my phone had full bars of signal and full battery, but any time I tried to call a roadside assistance number or my partner, I got dead air (no ringing dialtone or anything to indicate a call was starting) and a message popped up on my screen saying "connection error".
I turned off my phone and turned it back on again and the same thing kept happening...it seems to have adjusted itself now and let me make a call some 6 hours later, but I need to know if anyone else has experienced this and knows how to fix it if possible.
thanks in adv.I have a Nokia E65-1 but since day one I have had the "Connection Error" problem.
Basically quite often when I try to make a call I can't. I will repeatedly get "Connection Error" on my screen.
Or I'll be in the middle of a conversation (often with 3 Customer Services) and the phone will terminate the conversation.
I'm on the 3-UK network and the work-around above is not available. In the menu I get Menu > Settings > Network > Network Mode > Dual mode
So it is defaulted to "Dual mode" and there are no other options.
I have sent my phone away for repair twice:
1. re-flash done - no change
2. couldn't find an error with my phone
Then 3 replaced my hand-set with a second-hand E65-1 but I still get exactly the same problem.
3 have told me that it is a service issue and that they can't do anything about it.
I have used a friend's K810i with my 3-Sim and the problem didn't happen. Conclusively the phone and since I now have been given a different E65-1 I'm guessing all E65's have this problem or I'm just really unlucky.
Peachy!!Message Edited by areynolds on 29-Oct-200702:17 PM -
Hi I have three questions regarding problems with iSync at the moment.
1. I'm confused with iSync the program and iSync the '.Mac' feature in System Preferences.
2. iSync often believes I'm trying to connect via Exchange. Not true, but it's stopping my syncing contacts in particular. I never use the Office Exchange program and one of the laptop user logins uses exchange for their email account via Mail. Can this be prevented. It currently stops all four users.
3. Nokia E65 - iSync Plug-in Problem:
I have downloaded the plug-in Nokia made available from their site ( twice and when I try to install it stops at the 'select the destination' section when I supposed to select my hard drive with a green tick. However, it has a red cross and says 'installing this software requires 156kb of space. You cannot install the phone plug-in on this volume. Please update to the latest version of iSync using Software Updates.'
FYI, I have the latest versions according the my Software Update of System Preferences on my 10.4.9 MacBook. I also have 3.7Gb of free space on my hard drive, and I've tried the recommended process from Nokia three separate times.
Any tips, anyone? I've posted this on a Nokia discussion board to see if there are any Nokia specific solutions.
Many, many thanks.
PB G4 Mac OS X (10.4.9)I have the same issue.. am trying out the option given on http://tek-kon.blogspot.com/2010/03/phone-memory-full-phonememory-phone.html
Maybe you are looking for
-
Caseid 4670247907 worst customer support ever seen
caseid 4670247907 today was 15 day of my camplain log i have been provided with replacenet of defective part 2 times but both them self required replacement. this is the worst service support i have seen
-
I want to run down how dissatisfied I currently am with Verizon Wireless
I want to run down how dissatisfied I currently am with Verizon Wireless; this stated with the pre-order of the iPhones on Friday I like many other customers received the "ecdp" error on the web site and it took 45 minutes to actually be able to plac
-
IPod Nano 2nd Gen won't restore
The thing took a crap on me the other night, and now it won't work at all. There is no music on it anymore. When I try formatting it through Windows, it says the format could not be completed, and I've tried all the "R"s that are humanly possible wit
-
Hi All I would be greatful if someone could please help... I am still attempting to get cells painted within a WDA ALV grid display. I have tried to use the method stated in the WDA sap press book - but this method is for use with TABLE element and I
-
I tried to ask this question a few months ago, but I must not have given enough details for anyone to even guess what my problem might be. So I created a simple example to demonstrate what's happening. I have a cluster of 2 WL servers (7.0) running o