Nokia e66 doesn't work after failed update!

Yea i was updating firmware and my phone restarted on the Ovi suit seed that it's normal but it didn't turn back on it just flashes the buttons and thats all few seconds later it turns of.
Please help my!

Welcome to the forum!
Have a look at this post as a precursor to visiting Care Point if unsuccessful:/t5/Pool-of-Knowledge/Recovering-from-a-failed-firmware-update/m-p/398147/highlight/true#M112
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

Nokia 5800 doesn't work after software update

hi,
couple of hours ago i downloaded ovi suite to update my phone's software. then my phone restarted as it was supposed to ,at first it didn't accept my lock code,and now it doesn't work AT ALL. i tried everything,all i see is the blue "nokia" thing then it freezes. it would be awesome if anyone could help. Thanks in advance.
Solved!
Go to Solution.

Try a hard reset
http://friedbrains-friedblogs.blogspot.com/2009/02/3-finger-salute-for-5800-full-hard.html
It WILL sort it
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

My SuperDrive doesn't work after Lion update

My Superdrive doesn't work after Lion update, i have tried a few solutions that i found in forums, but nothing seems to work, please help me shed some light on my problem.
Thanks

I too have had the problem since updating to Lion. My superdrive isn't even recognized. I have repaid hard disk permissions and also reset PRAM. Sure wish I had a fix.

Fit the window with mouse doesn't work after new update 10.9.2

Hi, I could fit a windows using my mouse wheel or two finger(on trackpad), doesn't work after I set up new Mavericks update(10.9.2) I'm using Haswell rMBP. Can anyone help me please? Thanks a lot. (Also, minimize with mouse wheel doesn't work too.)

Doesn't anyone having this issue?

Nokia C7 GPS not working after belle update!

Hi everyone, i had a C7, working great till i updated it with symbian belle.
okay here is what i did.
-my GPS was working on symbian anna with maps version 3.06beta
-i updated the phone to symbian belle from symbian anna.
-installed nokia maps 3.06 beta, and replaced the one that came with the update because it had the option of route planning which the installed map did not.
-this was the first time i checked to see if the GPS was working after the update, and it did not work even after i stood in an open field for half an hour.
-i learned that the latest update of nokia maps in fact had route planning, so i used the nokia PC suite to reset the phone software, and then later updated everything that was listed in the software update app.
-my GPS could still not work after i stood in the same damn field for another half an hour.
-now it will just give approximate positions based on the wireless networks, and not give any accurate position, so i cant use it for navigation anymore.
-i tried running the gpsinfoqt app, and it keeps saying searching for a signal, but it never finds one!
Please help me!! if there is any way i could flash the C7 or run a diagnostic or something so atleast i figure what is wrong!

Hi akkudub,
Welcome to Nokia discussions board!
Have you used Nokia Suite for the update?
I advise you to follow the steps below in order to get your GPS fully working again:
1) Uninstall the current version of Nokia Suite that you have.
2) Clean the registry with a registry cleaner.
3) On your PC, go to Start > Run and type %temp% and click on "Run". Delete all Nokia folders from the folder that opens.
4) Download the newest Beta version of Nokia Suite from this link:
http://betalabs.nokia.com/apps/nokia-suite-beta
You will need to sign in to your Nokia account - the same credentials used to log into this forum.
We will appreciate your feedback once you have tried this program!
Once Nokia Suite is installed, please connect your device to it and perform the available updates if any is available. Alternatively please reinstall the current software. Also, click on the Maps tab and download the relevant maps files (Europe, UK etc...)
Let us know how you get on and feel free to post any other questions you may have.
Regards,
astra2025
Press the 'Accept Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

Nokia Social is not working after FP2 Update

Hello,
Nokia Social stopped working after FP2 update. It says '' Unable to start ''.
When it was working i had problem about imaging facebook photos. The photos that i click on were so blurry that i could not see it clearly. I had hope to see a fix about that problem but it was same until it stopped working. What is the problem that i cant see my and friend's photos clearly?
Many thanks

it gives service not availabe ,getting service etc......but works social verion1.5.....y so help out plzz ASAP

C7 sync doesn't work after Anna update

I normally sync the agenda between outlook 2003 and C7 with Ovi-suite.
After update to symbian Anna it doesn't work.
Strange is that Ovi suite gives the number of events that did not sync.
So he can recognize them, but can't sync.
Any solutions?
Thanks!
Pietth

I have the same problem in C6-01 after Anna Update, there are another two posts around here with other people with the same issue, an, believe it or not, no answer from Nokia
My problem also affects Ovi Maps favourites. I just could update them once since Anna Update, and now that is failed too

Internet Connection doesn't work after windows update.

Hi everyone,
my boyfriend recently updated his laptop.
After the update his computer wouldn't work anymore. I went on the web and read some topics on the forums. And even tried some of them already.
I don't have Norton or Mcfee security software.
Operating system is Windows 7 and it's a 64-bitssystem.
I tried disabling ipv6 but that doesn't help. When i open the cmd and type ipconfig/all i get an overview of several adapters.
DHCP is enabled for everything but Tunnel-adapter for LAN-connection * 3: (sorry translating from dutch).
Also IP-routering and WINS-proxy are disabled.
Also i checked the recent updates. But for some reason the failing ones aren't amongst them.
Can someone pls help? Im wellknown with OS and can try to work with anything u name.
Thanks in Advance!
Nilu

Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
Restart the computer.

EPSON CX5600 PRINTER DOESN'T WORK AFTER MOUNTAIN UPDATE

Hello Dear,
I've using my Epson Stylus CX5600 for a long time with OSX 10.7 Lion on my Mac.
The printer is connected in another computer (Windows 7) and I can print fine from my macbook air
After my system update for OSX Mountain Lion yesterday, my printer works fine only on Windows computer
on my macbook doesn't works anymore
I've re-installed a lot but when I try to print the sheets appears in blank
The driver-version available in Mountain Lion is 1.5
I guess this is the problem and need a urgent correction driver update
I'm looking forward to the internet and Epsons websites but didn't find nothing,
in Epson website doesn't
Can you help me please?
Thankyou

Hi my friend,
I've tryed Bonjour, but only works Windows to install a print for Mac.
I need the opposite... print from Mac to Windows.
Yes, I've a lot of problems to install a printer on Lion, but after 3 days I got success
I can't remember but I did this:
1. In iMac System Preferences->Print&Fax->"+"
2. In "Add Printer" click and Tool Bar->Customize Toolbar...
3. Add "Advanced" to Tool Bar and click "Done"
4. Click Advanced->Type->LPD/LPR Host or Printer
5. URL: lpd//user:[email protected]/EPSON%20Stylus%20CX5600&20Services
6. Printer Using->Select Printer Software... (EPSON Stylus CX5600 Services)
I did this and on Lion works fine. But now on Mountain Lion I can install, but I've received the error message
Do you have any idea?
Thank's again

HTML animation effects doesn't work after last update

After last update my html animation that have different effects with different time: fade, translate, rotation, scale, ecc... plays but some effects doesn't play.
Various animated png in html project appears immediatly without shows transitions or deformations.
I have made html animation with Motion Composer that have time curve for each effect.. and all work fine with previous dps desktop tools...
I don't use Hedge because folios with hedge animation is mooooooooore large than folios with motion composer animation.
A single complex animation (10 .png(1024x768) with multipe effects fo each) made with composer produce a 1MB folio...
The same animation made with Hedge produce more the 100MB folio.
why new version of dps don't show my html anim correctly ? I hope adobe correct this proble.

We just released an update to the DPS tools that addresses the issues around HTML/iFrame and buttons in release 25. You can download the updated components by following the links at http://www.adobe.com/go/learn_dps_install_en.
Neil

RM 900 remote doesn't work after driver update

Hi!
After solving the proble of? "crackle, pops and noise" with a driver update for Audigy Platinum Ex, I see that my remote is no longer working, i've try reinstalling Remote Center from original drivers and applications CD and after a Volume Up or Down the Rear Left Speaker gives me no sound.
I've seen in others threads in the forum and they say about installing Media Source, but after installing it still doesn't work.
Any clue how to make it work again?
Using Windows XP SP3 and Audigy Platinum Ex.
Thank you again in advance.
PD: Excuse my poor english, it's not my nati've language.

Hello Jashue67,
Sorry to hear about all the trouble with the Apple TV. It sounds like you have done a restore but need to pair your Apple TV remote at this point. You can follow these steps to pair the remote:
Or, you can press and hold the Menu and Next/Fast-forward buttons on the white Apple Remote, or hold the Menu and right buttons on the aluminum Apple Remote, for 6 seconds to pair.
You can find the full article here:
Apple TV: Pairing and unpairing the Apple Remote
http://support.apple.com/kb/ht1555
Thank you for using Apple Support Communities.
Best,
Sheila M.

N73: restore doesn't work after firmware update

Hello!
I just made a firmware update to my N73 with NSU, and the procedure completed with no errors.
Just before the update I made a backup with the application in the phone menu; the app wrote a backup.arc file in the MMC.
After the update I tried to restore the backup via the same app.
Here's the problem: the app seems to work (but the "restore" lasts just 1-2 seconds), the phone reboots, but nothing is restored.
Googleing aroung I found a solution: buy the Noki 1.7 software, extract SMS, contacts and files from the backup.arc, and put everything back on the phone...
Is there another solution that doesn't involve buying this 3rd party software?
TIA

The phone is working well...
I have been searching in internet, and there'a a lot of people with the same problem. Everybody tells to use PC Suite to backup... if I only knew before.

Internal camera doesn't work after Firmware Update

Hi everybody,
I had some troubles after updating the Firmware to version 1.1 on my MacBook (the black model). Since the update my camera (the one mounted on top of the screen) doesn't work any longer (it keeps capturing a plain green picture) and the led near the camera is always lighted. Is there anyone who had the same problem? Any idea to solve it?
thanks
MacBook Mac OS X (10.4.8)

Hi,
problem solved restarting with OptAlt+PR

Ipod doesn't work after firmware update

I have an old ipod and I tried to update the firmware. After the update It did'n work. ON the Ipod screen it appear like a plug indicating to charge it, but I charged it several times and the result is the same.
Now i'm trying to recover it again but my computer doesn't recognize it.
¿Is there anything I can do?
Thanks in advance.
Jse

The best place to look for help first is Genuine Apple help directly from Apple.
Read the iPod Touch Users Guide.
http://support.apple.com/manuals/#ipodtouch
Also start with the basics from Apple.
1. *Restart iPod touch:* Press and hold the On/Off Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPod touch. To turn iPod touch back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
If you can’t turn off iPod touch or if the problem continues, you may need to reset iPod touch. A reset should be done only if turning iPod touch off and on doesn’t resolve the problem.
2. *Reset iPod touch:* Press and hold both the On/Off Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears.
For more troubleshooting suggestions, see Appendix B, “Support and Other Information,” on page 214.
And More..........

HP Laserjet m1214nfh MFP Doesn't work after firmware updating

Hello
HP Laserjet m1214nfh MFP (USB Connetcion).
I downloaded the latest firmware (ver: 20130211 4 Mars 2013) and updated it.Now it doesn't work and on its LCD it prompts "Initializing" and after some seconds LCD turns off and again prompts "Initializing".
Please guide me.
thank you

Hi,
Please try plugging the printer to a direct power source without any power hub or surge protector usage and check if that may help.
If the same persists please contact HP support by following Technical support after you buy for your region below:
http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Nokia e66 doesn't work after failed update!

Similar Messages

Maybe you are looking for