Nokia E7 After Belle Update Camera is not Working

hi everyone.my nokia E7-00's same problem.my software is 111.040.1511
tried every method 7370 7780 flashed with nokia care suite reinstalled with nokia suite.what can i do nokia?with camera pro software camera has opened one time but when i presssed snap button gave me black screen then strarted to lag but when i tried to turn of my phone after few seconds left to turn off camera flashed.
Moderator's notes: The post was edited. A more appropriate subject was provided.

Sounds like you have performed the full gamut of things to do with it, if something has gone amiss. Unfortunately, your only option now is to take your phone to your local Nokia Care point for them to inspect: http://nokia.com/support

Similar Messages

After ios update volume controls not working

After updating to iOS 7.0.4, when I unlock my phone, the volume buttons no longer work, Ringer window just shows as grey. Volume works fine to adjust ringer when receiving a call, also works fine within apps. However, key tones (clicks) no longer function. Also, can no longer power off the phone, it just restarts.
Tried a hard reset (hold power and home, see apple, release). no change
Tried to erase all content and settings and setup as new phone, no change
Also noticed that Friend Finder no longer plays notifications - IE when a contact leaves or arrives from or to a certain location. Worked fine before the iOS update. Even tried uninstalling, hard reset, re-installing Friend Finder, no change.
Problem is intermittent. It seems to fix itself throughout the day.
Someone suggested replacing the charge port on the phone but I find it hard to believe that the charge port mechanically failed directly after the update to 7.0.4.
Suggestions?

Hi im a newbie here and i recently bought an iphone from a friend (wahh i know i should have bought it legitly but i wasnt paying that price sorry),
I have a 32 GB Black Iphone 4s and theres a problem.
Yesterday i decided i wanted music on my phone and decided to sync my phone to my itunes and computer..
But lets backtrack first... Earlier in the day i decided to plug a (non iphone heaphone into the headphone port) and much to my ssureprise it worked (all ive ever dealt with is blackberry) unplugged the headphones and a few hours later this is where i synced my phone tried to play music an GASP nothing..in the music app the volume nubs are gray and cannot be moved left or right and no sound is being heard.. also when i tried to check to see if my ringer was going up and down it was displaying the little speaker but not the bar that moves. Read the discussions here and it seemed that we've all been screwed now i love my iphone and all its features only phone ive ever wanted but i would love this to be fixed.
I have tried:
Restting all setting
Hard Reset
Restore
Restore from back
Changing everything imaginable in Setting and nothing has worked
Making a voicenote and i actually got sound and my ringer started to work! YAY right.. WRONG
Cleaning it with nail polish removeer
Brushing it with a brush
Using a paperclip and scraping it
*i did find some fluff but it came out*
After a few futile attempts at trying to play videos and games with sound and getting nothing i have decided its time to put my tail inbetween my legs and hope that someone can help.
Im not sure if was the type of headphones that i used or hat but i need help
PLEASE REPLY I NEED MUSIC
I AM ALSO A YOUTUBER AND FILM OFF MY IPHONE AND I NEED TO HEAR WHAT **** I AM TALKING AT THE END OF A VIDEO
THANK YOU

After Lion upgrade, camera does not work on internet services like facebook

After upgrading to Lion, the onboard camera no longer works with internet sites like Facebook.
I tried this with Safari and Google Chrome with the same lack of results.
You will select take photo in Facebook and the next screen is locked up. This failure occurred on two separat Macbooks.
Yet this does not happen with my Macbooks with Snow Leapord - I tried.
Any ideas on how to fix this.
Lion appears to be the first Windows like Mac operating system (glitchy). Not ready for primetime. Is this an omen of what Apple without Jobs will be like (again).
My second computer to be upgraded had conflicts with certain start-up programs that had the effect of locking out the Internet connection.
I had to manually delete these programs to get Internet to work.

Seeing the same issue on a C2D Macbook, camera worked fine yesterday afternoon using GTalk. Upgraded to Lion last night now the camera no longer shows up in any of the utilities that used to be able to see it. Don't buy the "Must be a hardware problem" too wide spread for it to not be software related.

Nokia N9 PR1.1 update: Camera stop to work

Hello,
I've upgraded my Nokia N9 yesterday to PR1.1.
My Camera not work now.
When I see /var/log/syslog, I have this lines:
Nov 9 10:20:06 (2011) applifed[937]: Application 'com.nokia.maemo.CameraService' released from prestarted state, count=1
Nov 9 10:20:07 (2011) camera[2277]: Setting camera pipeline to running state failed.
Nov 9 10:20:07 (2011) wlancond[1009]: Scan issued
Nov 9 10:20:07 (2011) sensord[652]: *WARNING* [../../core/nodebase.cpp:267:bool NodeBase::setIntervalRequest(int, unsigned int)]: Invalid interval requested for node 'compasschain' by session '15': 0
Nov 9 10:20:07 (2011) camera[2277]: Camera pipeline error: "Internal GStreamer error: negotiation problem. Please file a bug at http://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer." , "camerabingeneral.c(61): gst_camerabin_add_element (): /GstCameraBin:QCameraCameraBin: linking capsfilter3 failed" , 7
Nov 9 10:20:07 (2011) wlancond[1009]: Scan results ready -- scan active
Nov 9 10:20:07 (2011) wlancond[1009]: Scan results (1 APs) to :1.109
Nov 9 10:20:07 (2011) icd2 0.201.2+0m6[1224]: Duplicate filter: Do not add filter for app :1.418
Nov 9 10:20:07 (2011) icd2 0.201.2+0m6[1224]: Duplicate filter: Do not add filter for app :1.418
Nov 9 10:20:07 (2011) nped[1419]: GLIB DEBUG ConIc - con_ic_connection_connect_by_id(0x188810, [ANY], 1)
Nov 9 10:20:07 (2011) icd2 0.201.2+0m6[1224]: Duplicate filter: Do not add filter for app :1.150
Nov 9 10:20:07 (2011) icd2 0.201.2+0m6[1224]: Duplicate filter: Do not add filter for app :1.150
Nov 9 10:20:09 (2011) camera[2277]: Setting camera pipeline to running state failed.
Nov 9 10:20:10 (2011) camera[2277]: Camera pipeline error: "Internal GStreamer error: negotiation problem. Please file a bug at http://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer." , "camerabingeneral.c(61): gst_camerabin_add_element (): /GstCameraBin:QCameraCameraBin: linking capsfilter4 failed" , 7
Nov 9 10:20:10 (2011) sensord[652]: *WARNING* [../../core/nodebase.cpp:267:bool NodeBase::setIntervalRequest(int, unsigned int)]: Invalid interval requested for node 'compasschain' by session '16': 0
I suppose I must disable GPS photo tagging?
Can you help me?
Thanks

I've disabled the geo tagging: gconftool-2 -t string -s /apps/camera-ui/settings/geoLocationEnabled no But the issue still exists. Nov 9 11:00:20 (2011) applifed[936]: 'com.nokia.maemo.CameraService' got registered with pid '1800'.. Nov 9 11:00:25 (2011) applifed[936]: Application 'com.nokia.maemo.CameraService' released from prestarted state, count=1 Nov 9 11:00:28 (2011) camera[1800]: Setting camera pipeline to running state failed. Nov 9 11:00:28 (2011) camera[1800]: Camera pipeline error: "Internal GStreamer error: negotiation problem. Please file a bug at http://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer." , "camerabingeneral.c(61): gst_camerabin_add_element (): /GstCameraBin:QCameraCameraBin: linking capsfilter3 failed" , 7 Nov 9 11:00:30 (2011) camera[1800]: Setting camera pipeline to running state failed. Nov 9 11:00:30 (2011) camera[1800]: Camera pipeline error: "Internal GStreamer error: negotiation problem. Please file a bug at http://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer." , "camerabingeneral.c(61): gst_camerabin_add_element (): /GstCameraBin:QCameraCameraBin: linking capsfilter4 failed" , 7

HT4718 I have a new MACBOOK PRO and after running updates IPhoto does not work

After installing Iphoto 9.4.1 from the MACSTORE updates Iphot will not run. I downloaded (.4.1 again and tried to install but it says that the update must be done from the Mac store. But I do not show any updates when checking the mac store and do not know how to proceed. I just purchased the computer and set it up on Saturday. I transferred files from an older Macbook pro.

Hi j,
Gray Screen at Startup (try Safe Boot)
http://support.apple.com/kb/TS2570

[SOLVED] After qemu update: KVM does not work anymore

Hi,
I used to use qemu-kvm, as in
qemu-kvm \
-net nic,vlan=1 -net user,vlan=1 \
-drive file=/home/flash-vm/hdd0,if=virtio,cache=writethrough \
-vga std -vnc localhost:2 -usbdevice tablet \
-m 1024
However, now qemu-kvm has been removed. If I replace "qemu-kvm" with "qemu-system-x86_64" and try to run it with an extra argument "-machine accel=kvm" or "-enable-kvm", what I get is
Could not access KVM kernel module: Permission denied
failed to initialize KVM: Permission denied
The kernel modules are there:
# lsmod | grep kvm
kvm_intel 124064 0
kvm 384721 1 kvm_intel
and the processor is
$ lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) per core: 2
Core(s) per socket: 2
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 37
Stepping: 5
CPU MHz: 1197.000
BogoMIPS: 5321.24
Virtualization: VT-x
L1d cache: 32K
L1i cache: 32K
L2 cache: 256K
L3 cache: 3072K
NUMA node0 CPU(s): 0-3
I have added my user to the group kvm as well, as instructed by pacman. Any help would be much appreciated!
Last edited by ffcitatos (2013-03-07 06:47:06)

Interestingly, mine worked without being in the new group. However, I think that's because I hadn't logged out since the update, so the session didn't know that I had been removed from the group. Though I could be missing something.

After Security update, FireWire iPods not working in iTunes 7.0.2

Hi all,
this past weekend, I installed the latest Apple security update and restarted my Mac.
Everything was working fine until I connected my iPod mini (via FireWire) and realized that although the iPod is mounting on the desktop, it is NOT appearing in iTunes. My other iPod, a 10GB 3G iPod, is also experiencing the same problem. The exception to this is my son's 512MB Shuffle -- it's working just fine.
I've tried all of the following, to no avail:
1. changed FW port
2. reset iPod
3. restored iPod
4. deleted and reinstalled iTunes
5. ran Disk Utility and DiskWarrior and "repaired" iPod hard drive
help!
iMac G5 Mac OS X (10.4.8) iPod mini, iPod, Shuffle, iTunes 7.0.2

Michael
I have both a frist gen. and a fifth gen iPod and both are working on my iMac, which runs iTunes 7.0.2 and it's OS is up to date with the the latest security update.
Rick

After firmware update ipod touch not working with my Sony Home Theater DAV HDX287WC any suggestions

Is there a solution to play music from my iPod touch on my Sony Home Theater System DAV HDX 287WC after recent firmware/software upgrade? However, I am still able to play music through my ipod classic, but I am really missing the the functionality of the iPod touch with my home theater system.

- Check to see if there is a firmware update for the theater system
Sometimes this works but sometimes an IOS update breaks compatibility.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

After Lion update, Outlook 2011 not working...

I update Lion last night, and this morning I can't open the New Message window in Outlook 2011 to send a new message. I rebooted the computer after the install, and after that I tried closing down the program and rebooting.

You should post this in the Lion forums.
https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion
B-rock

Problem setting up email after Belle update

Hi, I was having this problem that after Belle update I could not receive emails after set up.
My email is with eircom.net and phone is with Vodafone Ireland. It is working afet I tried these settings.
Set your own email address, user name and password.
Try this settings:
Incoming server: webmail.eircom.net ( use your own, this in mine with eircom.net)
access point: internet
NB: security: OFF
Port: default
APOP secure login: OFF
outgoing server: For vodafone it is mail.vodafone.ie (Ireland)
Access point: internet
Security: OFF
port:default
Hope these help....

Problem solved. The ipad default is set to IMAP. When I changed it to a POP server, problem solved.

Camera is not working after Lumia Cyan update WP8....

Hellooo Sir, I am Kailash Kumar from India (Uttar Pradesh). I have Nokia Lumia 620, I got this from my friend May 2014 and he bought it from Saudi Arbia and now it is out of warrently..
when I got this its front camera was not working But rear(back) works fine with flash, But after some days I Updated it to win8.1 with Preview of Devloper, and after updating my Camera has Stoped working when I click the Camera Button, within a second it comes to Home Screen..... So I Downgrade to Win8.0 OS via Nokia Software Updater and My Camera Start Working again....
Someone Suggest me to wait for official realese of Lumia Cyan with W8.1 OS and I waited for it and In August last My phone shows that a Update is Available and Now Update it again Officialy to Win8.1 with Cyan Update via Wifi, and the Same problem Again Happening My Camera Stopped working again after click the Camera Button, within a second it comes to Home Screen, I tried everything, Soft reset, Hard Reset, Uninstalling Nokia Camera App & Installing Again, Reset Camera Button.... But the problem remain Same, Stil Camera is not working.........
I go for the nearest Customer Care Service, they told me I Updated it via Wifi and they will update it with PC Charges Rupee 450/- But I didn't give my phone to Care.... After a Day I updated it Via PC from NSU 4.2.1 (I think Customer Care will do the Same) But the Problem Remaining Same Camera Stil is not working......
PLEASE HELP ME SOMEONE WITH THIS PROBLEM.. HERE ARE SOME MORE INFO OF MY LUMIA 620:-
1- FIRST IT IS OUT OF COUNTRY (SAUDI ARBIA) AND OUT OF WARRENTY...
2- OS VERSION: - 8.10.12393.890
     FIRMWARE REVISION NO. : 3058.50000.1425.0002
     HARDWARE REVISION NO. : 5.0.2.0
     RADIO SOFTWARE VERSION : 2.0.242037.8
     CHIP SOC VERSION : 82207
I WILL HIGHLY THANKFULL TO YOU.
Moderator's note: The attachments were removed as it contain the phone's IMEI. For security purposes, avoid posting any of your presonal information on public forums like this.

try hard reset and see if it works and let me know if it does. take phone off. press (green call) key, (*) key, (3) key and power button then wait for phone to come on then let go of keys.

X7 headset is not recognized after Belle update

Hi,
afters Belle update my original headset is not recognized by Nokia X7, can't listen to music or radio. The icon is not visible.
Headset is 100% ok, I tried it on different phone and works fine.
After hard reset is starts working but after unplugged and plugged one again it is still not working. Another hard reset didn't help.
Also tried accessories settings in settings menu - changing profiles and other setting - didn't help.
Any ideas?
Regards

Same problem here too.
Updated to Belle and tried to listen to my music using the original nokia x7 headsets and the music plays only from the speakers too. Tried the headsets on my brother's nokia x7 updated to belle too and they worked fine. Others headsets also didnt work in my nokia x7 but they did in my brother's. I tried to reinstall Belle, restore orinigal settings several times and it didn't work.
Think i just gonna have to sent my phone to the SAT

Webcam not working for Macbook Air 2013 after upgrading to OSX Mavericks? Yahoo/ Google/Skype cam chats not working. Facetime works though. Any updates of Mavericks released to fix this?

Webcam not working for Macbook Air 2013 after upgrading to OSX Mavericks? Yahoo/ Google/Skype cam chats not working. Facetime works though. Any updates of Mavericks released to fix this?

I have a MacBook Pro Retina display: 15.4-inch late 2015 with OS X Mavericks install, only on second week.
Insight works on FaceTime, Skype, but yahoo program does not show insight cam in dropped down.
Now when I got my new MacBook Pro, I down loaded all new Skype (worked tested), FaceTime (Worked Tested), Yahoo (not worked)
Fix:
With the new Maverick you have to use there messager program Version 8.0 (4218). Once I add my yahoo account video works again.
It also supported AOL, AIM, Google Talk, Jabber.
Guess I miss it frist time... hope this helps...

Messaging Not Working Fine After Belle Update

My C7 has issues after Belle update when any incomeing new message in inbox then i read message from the inbox after i read the message then toush the back botton the message is delete in the inbox automaticaly.....i cannot recover this message...!
plzz help me to solve this problem.......?

If the update does not work for you then do as I explained in my previous post and roll back to the previous driver. That philosophy can be applied to all updates.
If there is no pressing or emergent reason to update and your PC or notebook is running just great... don't update. (that is especially true when it comes to a BIOS update)
For your issue #2, the problem could be your wireless connection (hotspot, router or modem) that causes the dropped connection.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

IPad 2 front and back camera is not work after update iOS 7.0.4 it gives like the resolution is not adjusted

After updating my ipad 2 to iOS 7.0.4 , front and back camera is not working it gives like very small dots or dash. I did restore from iTunes and reset by holding on the home and sleep button, I also tried to close the app from the task bar but still all trials didn't solve the problem.

I haven't heard of this before so I doubt it's a bug. Probably something happened during the 7.04 download.
Backup your iPhone to iTunes and restore it as a new iphone, then restore from the backup. This will give you a fresh copy of iOS 7.04.

Nokia E7 After Belle Update Camera is not Working

Similar Messages

Maybe you are looking for