Nokia E7 -Calendar function extremely slow

i have a new Nokia E7-00. I experience the calendar function to be VERY slow. It takes seconds to open, then more seconds to load the calender entries, then to move from one date to the other, even closing the function is slow. What can I do to make it respond faster?

I found out something very interesting, bur I still don't understand it.
As i've told my E70 syncs with my office using Lotus Notes Traveler. After the initial sync my E70 calendar became very, very slow, and is almost useless. I tried as far as i know everything. (see postings above) but nothing helped.Then I tried something new: I synchronised my calendar (as usual) with nokia suite on my PC at home. Then I erased all entrys on my E70. (about 150 calendar entrys). After that I did NOT sync with my office using Lotus Notes Traveler, but I reloaded my E70 by syncing it with my PC at home. (MS Outlook calendar) The about 150 entrys were back again on my E70. After that my E70 calender runned very smooth. Now I can switch between functions on the calender very quick.
The question is: What is the difference between the calendar data downloaded from my office (which slows down my E70 extremely) and downlading the same data from Nokia Suite (which originally came from my office and were synchronised on my home-pc?)
Now my Nokia is running fine but I cant backup it on my home-pc dayly with Nokia Suite, then erase my phone and synchronise again to get my data back, to keep it running.
I did an extra test. I've put some test entrys in my calendar on the E70 and synchronised it with my office. I also made som test entrys in my remote office calendar and synchtonised it. The data transferred from the phone to the office and back as it should, and still the E70 runs smooth. But these were only a few test entries. I'm not a technician, but hopefully somebody understands what I try to discribe and knows the answer.
Thanx in advance.

Similar Messages

Subscribed calendars - iPhone calendar gets extremly slow.

Hi, I tried to use subscribed calendars on iPhone. Due to the fact that there is still no brithday calendar implemented on iPhone I had to add several calendards:
1: brithday calendar - I published the iCal birthday calendar to mobile me.
2: calendar week - as there is still no ISO calendar week on iPhones CalApp I subscribed for a calendar with whole day events on every monday - showing the week number.
3: a friends calendar - A standard Google calendar
With these three subscriptions, my MobileMe calendar and my ActiveSync the CalApp on iPhone gets extremely slow. Does anybody else does have the same problems. Having a limit with not more than two subscribed calendars, app speed is slow but acceptable. Having just one subscribed calendar we can speak about normal behavior.

You could reduce to 2 subscribed feeds by using a ISO calendar that is merged into an existing calendar in your .mac account instead of as a subscribed feed. Those numbered weeks aren't going to change, so why not just make permanent? I did the same thing in my Google calendar.
I have subscribed to 5 calendar feeds in iPhone 3.0 and have no speed performance issues. However, the calendar app only displays information for one of the subscribed feeds! I cannot get the other feeds to work. I have tried installing each one before and after the one working feed, but still they do not work. All the feeds work in iCal on my computer.
The 4 feeds that are not working properly on the iPhone are schedules to my favorite MLB, NFL and college teams from Yahoo! Sports. I want subscribed feeds because game times and t.v. listings change from week to week.
This is disappointing because subscribed calendar feeds was the major improvement I wanted to see in 3.0.

Computer function extremely slow

My Macbook Air is really slow, running so slowly internet doesn't load properly to the point where it stops loading, computer function is slow. it is not an internet problem because no one else using the same internet connection has a problem. My macbook is 7 months old, do i have a virus? what should i do ?

You do not have a virus. Most likely, you simply have some crap software installed that is killing your Mac's performance. Download a copy of EtreCheck:
http://www.etresoft.com/etrecheck
Run it and paste a copy of the report it generates into a reply here.

Outlook 2010/13 Laptop Calendar access extremely slow after opening shared calendar

I have a problem with several laptops running Win 7 Ultimate on a network running SBS 2008 (Exch 2007) when they are on the internal network. Outlook response is fine until they tick any shared calendar (either shared by the user or with full access
to the mailbox granted at the server level)- the response of the calendar screen for the
local users calendar or the shared calendar
when using the advance or retreat arrows on the weeks drops down to roughly 20 seconds to advance to the next week, if the shared calendar is then unticked the speed stays slow for accessing the local calendar. if the user exits outlook and restarts
it the speed for accessing their own calendar returns to normal until they open another shared calendar.
this is a problem that has started within the last couple of months. SP are up to date on the windows and office.
I have tried ticking the download shared folders on and off, and also switching to using HTTP instead of TCPIP through the outlook anywhere. they run in cached mode as they are laptops- uncached is not an option
network access is fine
The problem affects some users on the network but not others. the problem shows on office 2010 and 2013. they don't appear to have the problem when they are out of the office.
Any thoughts anyone?

If you run your profile in Exchange cache mode and enable "Download share folders", please try to run SCANPST file to fix the OST/PST file and check the result.
http://support.microsoft.com/kb/287497/en-us
By the way, does it for all shared calendr when you go to access them?
Tony Chen
TechNet Community Support

Repeating Calendar events & Extreme slow Syncing in Itunes

Every since I have upgraded to Lion, I have been getting multiple entries on my iphone from Ical on my mac. For example if I have an event scheduled for tomorrow on my mac and move it one hour up or back, I will get 3-4 entries on my iphone when I sync. I sync through Itunes and have already tried replacing the iphone events with the mac. This has not worked. Additionally syncing between my mac and iphone takes a little over 13 minutes each time. Any ideas would be appreciated. Prior to Lion sycning took under 3 minutes and no duplicates. Would appreicate any help someone might could give me on this problem.

This link provides the data included with your iPhone's backup, which includes photos and/or video in your iPhone's Camera Roll, contact info, various iPhone settings, recent calls, call favorites, SMS/MMS, Safari history/cache/cookies, email account settings, wi-fi network settings, 3rd party app settings and data created and stored by a 3rd party app.
http://support.apple.com/kb/HT1766
http://support.apple.com/kb/HT3603
Something may be wrong with your backup or with some of the data included with the backup since it shouldn't take 12 hours or anywhere close to that. My iPhone's backup takes well less than 5 minutes. You can delete the existing backup and create a new backup to see if this makes any difference. An initial new backup will take longer that succeeding backups.

Why are my paste and insert functions extremely slow in P6.5.1?

When inserting text from Microsoft Word, or even copying and pasting within PM 6.5.1, it takes 10 seconds for each insert transaction to finish. During the 10 seconds I am frozen out of doing anything in PM. I'm working on a magazine deadline and this has never happened to me before. I tried scanning my computer for viruses, but it came up clean. PLEASE HELP!!! What can be causing this? I'm ready to pull my hair out!!
Thanks for any assistance,
JLKCMO

In addtion to Bob's and Buko's comments, "place" your text into PM, and use another format such as RTF or, preferably in IMO, TXT.
Word files are full of junk and try as it might, PM can't filter it all out. You may even find that after successfully pasting, PM runs slowly anyway as the Colour and Style palettes full of unwanted MS stuff.
The long term answer is move on to InDesign.
Iechyd da! John
20:50 17/08/2009 BST

Calendar extremely slow on 9300i

The access to the calendar in my 9300i is extremely slow, almost useless. Any idea on how to speed up it???

How much data have you got on the phone?
You could either try reducing the quantity of data you have if you have loads, or you could try backing up your phone, formatting it and then restoring the backup to see if that helps get it back to its usual self...
To format the communicator, remove and then replace the battery. Then when you see the word Nokia in blue on the inside screen, hold down the ctrl, shift and F keys simultaneously. After the word Nokia disappears and before the Nokia handshake logo appears, you should be given the option to completely format the device .
ALL DATA on the phone memory will be completely erased and the original settings restored so make sure you have any important data backed up.
If you didn't get the option to format the device before the Nokia handshake logo appears, repeat the same process again and hopefully you will receive the option before this logo appears.

File display extremely slow with call of OLE_FLUSH_CALL standard function

Hi,
We are running SAP R/3 Enterprise 640 with Doculink extension.
When trying to display PDF files stored in an SAP Archive Server, it takes quiet a while to retreive the document, while displaying it through a web browser is very fast.
I have made a some performances tests in ST05, and the results clearly shows that the ABAP execution time takes most of the process time. When digging deeper into which function takes so many time, I can see that the standard program SAPLOLEA takes a long while on a wait for RFC call. And then when I display the source code responsible for this call, I see that the OLE_FLUSH_CALL call takes the most time.
I have tried to look around in SAP Notes but didn't find any relevant information regarding this problem. I wondered if I would be able to find more interesting opinions on SDN.
Thanks in advance for your help,
Thibault

Query returns anywhere from 6000 to 32000 rows. For each of those rows a parameter is passed in to 4 different functions to get ytd totals. When I call the functions in the in-line view but do not select from them in the main SQL, the report (oh, this is Application Express 4.0 interactive reports, just an FYI) runs fast. The report comes back in a few seconds. But when I select from the in-line view to display those ytd totals, the report runs extremely slow. I know there are the articles about context switching and how mixing SQL with PL/SQL performs poorly. So I tried a pipeline table function where the function for the ytd totals populate the columns of the pipeline table and I select from the pipeline table in the SQL query in the interactive report. That seemed to perform a little worse from what I can tell.
Thanks for any help you can offer.

Experiencing extreme slowness of the Admin console for any function in Weblogic 12.1.1.

Experiencing extreme slowness of the Admin console for any function in Weblogic 12.1.1.
Configuration is Admin server plus 28 JMS servers - no nodemanager - all on the same server.
When I bring up Admin console alone response is quick but bringing up JMS servers one by one will slow it down.
I did not experience this problem when this configuration was in Weblogic 9.
Memory configuration is -Xms4g, -Xmx4g.
Any ideas what else I should check ?
Thanks.

Hi,
Collect multiple thread dump at the interval of 10 sec and check what the threads are doing .
Thread dumps will give you some information about why there is a slowness .
Ways to collect thread dumps
Thread dumps & Ways to take thread dumps - weblogicexpert
Hope it helps

Firefox 4 is extremely slow to perform any function on my lap top compared to previous versions. Why? And how do I change this!

Firefox 4 is extremely slow to perform any function on my lap top compared to previous versions. Why? And how do I change this!

Firefox 21 and Firefox 22 running on Windows 7 have been reported to take a long time to "wake up" from sleep. I realize hibernation is different than sleep, but... this is the closest match for your description.
Some users have reported that this problem is resolved in Firefox 23 (currently in beta). Others have had inconsistent luck with minimizing Firefox before letting Windows sleep and other measures.
Please check out this (very long) thread for more information: [https://support.mozilla.org/questions/961898 browser freezes after resuming from sleep]
Or jump to the part about Firefox 23: https://support.mozilla.org/questions/961898?page=3#answer-457321
The fact that this just started recently suggests perhaps it is related to another program or update, but I don't think anyone has confirmed the exact interaction that causes the problem.

JSF calendar makes IE7 extremely slow

When using the Calendar component in a datatable I notice that IE7 is extremely slow. Clicking on anything in IE (scrollbars, menus, even the X to close it) we experience a 3-5 second delay to get the focus. If we remove the columns with the calendar components, IE is more responsive. There is no delay at all when using Firefox. Has anyone else experienced this? I've read IE has problems with javascript, is this the problem here? Possible solutions? thanks in advance

The core JSF components are from http://java.sun.com/jsf/core and are listed here: [http://java.sun.com/javaee/javaserverfaces/1.2_MR1/docs/tlddocs/index.html].
I am not sure, but according to the taglib it look like part of Woodstock. Check [http://woodstock.dev.java.net]. It may be good to know that this project was almost dead for more than one year and that they stopped development since january this year and that all users are recommended to migrate to RichFaces or IceFaces.

MBP 5.1 I have a recent problem with airport connectivity. ethernet connection is working fine, but wifi has become extremely slow and bad functioning. signal is received, no problem with the wlan (my husband 's wifi with MBP is perfect) please help

I have a MBP 5.1 with snow leopard 10.6.8. It has been working fine until few days ago, when it started to have different problems:
1) airport is not working well. it is extremely slow, has difficulties in fully loading pages, looses connectivity, It is not browser related, behaves thesame in safari or firefox; it is not the router/wlan; my husband mbp wifi works fine (as it was mine...) and iphone wifi is also working fine. it sees the signal and different networks. , it is also very very slow in opening skype (after that, it is working ok) if I connect via ethernet cable to the same router, everything works perfectly and with the correct speed.could it be a damaged airport card? a software problem/corruption? logic board? (I hope not, the computer is out of apple care now....)
2) after a certain time (more than hours) of use, the trackpad is behaving strangly, increase sensitivity to touch, unwanted selection of folders, files and text or images in web pages when i move the cursor, the cursor jumping all over the places while writing, ecc I have the impression it starts doing that when I use heavily the CPU ( and the temperature goes up). Is this again a problem of the mother/logic board?
I had recently serviced it since it was not booting properly, but except some permissions repaired, they did noit find anything wrong in the hard drive (which I have now substituted with a SSD) or other hardware.
thanks in advance for any help/suggestions
alessandra

I think I solved the wifi connection problem, just by switching off completely the router! sounds trivial, but in this case it worked!!!
the funny behaviour of the trackpad/cursor still persists. any suggestion???
thanks again

ESS team claendar appears extremely slow

Hello,
we use employee self services with a SAP NetWeaver Portal 7.0.
A few days ago we installed patch level 38 to our SAP HR 600. Since then the team calendar view in our portal appears extremely slow.
We get no error message and the leaving times and names of clerks in our departmens are shown but it takes several minutes - before it was viewn within a few seconds.
Other functions, for example creating a leave request, work fine and in normal time.
Does anyone here have this issue or an idea how to solve it, too?
Kind regards,
Marco

Hey colleague,
Maybe you have created an inconsistency on your support package levels. Check my wiki page to see if you are fulfilling all requirements of the SP stack you are:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/profile/marcio+leoni
As well, try runnin db statistics for the HRP tables, also try to reproduce the issue using a "clean user". Only with SAP_ALL and SUPER_ADMIN roles...
Cheers,
Márcio

Help! MacBook Pro only boots in Safe Mode and runs extremely slow (bonus: happened in Brazil and there are no Apple stores here - I need you guys!)

It's a MBP mid 2010. Last year it had some problems and an Apple authorised shop changed the HD and upgraded the OS from Snow Leopard to Lion. After that it seemed fine. Recently it started getting very slow and apps (e.g. Chrome, Flash) would crash. At some point it seemed stuck so I gave it a hard shutdown - bad idea. After that it would only boot in Safe Mode. I ran repar disk and repair permissions from the Disk Utility and it booted normally again but extremely slow. I upgraded to OS X 10.8.2, but didn't solve it. I tried booting with Command D to have a hardware diagnostic - it wouldn't boot and now it only boots in Safe Mode.
All data is backed and I have an external HD (but not an OS X Disc). Ready to anything. Help please!
Utility Disk Logs
Repairing permissions for “Macintosh HD”
Group differs on “Library/Java”; should be 0; group is 80.
Permissions differ on “Library/Java”; should be drwxr-xr-x ; they are drwxrwxr-x .
Repaired “Library/Java”
Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.
Permissions differ on “System/Library/Frameworks/CoreGraphics.framework/CoreGraphics”; should be lrwxrwxrwx ; they are lrwxr-xr-x .
Repaired “System/Library/Frameworks/CoreGraphics.framework/CoreGraphics”
Permissions differ on “System/Library/Frameworks/CoreGraphics.framework/Resources”; should be lrwxrwxrwx ; they are lrwxr-xr-x .
Repaired “System/Library/Frameworks/CoreGraphics.framework/Resources”
Permissions differ on “System/Library/Frameworks/CoreGraphics.framework/Versions/Current”; should be lrwxrwxrwx ; they are lrwxr-xr-x .
Repaired “System/Library/Frameworks/CoreGraphics.framework/Versions/Current”
Permissions repair complete
Verifying volume “Macintosh HD”
Checking file systemPerforming live verification.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Verifying and repairing partition map for “ST9500325AS Media”
Checking prerequisites
Checking the partition list
Adjusting partition map to fit whole disk as required
Checking for an EFI system partition
Checking the EFI system partition’s size
Checking the EFI system partition’s file system
Checking all HFS data partition loader spaces
Reviewing boot support loaders
Checking Core Storage Physical Volume partitions
Updating Windows boot.ini files as required
The partition map appears to be OK

See this for incompatible log in items
https://support.apple.com/kb/TS4348
Also you can perform #1 and #2 as these occur before Safe Mode, so you just reboot again with Shift key if you need to enter Safe Mode again.
At this point it sounds like your hard drive is dying or some sort of other hardware issue which I can only advise this.
Try to install OS X on a external drive and boot from it, if it's fine then you know your internal boot drive is dying.
Create a data recovery/undelete external boot drive
You can replace your internal drive yourself.
OtherWorld Computing is pretty good about providing drives and tool kits to perform that function yourself.
Install/upgrade RAM or storage drive in Mac's

Zoom (Accessibility feature) is extremely slow with multiple monitors [OSX 10.10]

When connecting an external display to my Laptop and using the "Ctrl + Scroll" functionality for accessibility zooming, the display/graphics are extremely slow.
An estimate of FPS would be sub 1FPS. The machine becomes unresponsive and is unusable for a minute or so, until I can get it zoomed back out, and it begins responding normally.
This is very disruptive, as its a feature I use often.
The same laptop on OSX 10.9 did not exhibit this issue.
Hardware: MacBook Pro 13" Retina Mid 2014, 16GB Ram
Software: OSX Yosemite 10.10
System Information: http://cl.ly/image/0H1p032w0M0w
Reproduction steps:
1. Enable CTRL+SCROLL zoom functionality in System Preferences > Accessibility
2. Connect external monitor (Display port cable)
3. Hold CTRL and Scroll to zoom
4. System becomes slow, graphics slow, showing < 1 FPS without any other applications running

Just to note, I have the same problem....
When you use Thunderbolt display with 15" MB Pro late 2013, it zooms unreasonably slow.
But when you close the laptop display and only have the Thunderbolt display on, it zooms a bit faster, but still too slow for such a new laptop.
I think it could be optimised a bit better, something somewhere can be improved here.
Regards,
Ned

Nokia E7 -Calendar function extremely slow

Similar Messages

Maybe you are looking for