Nokia E7 switch offed auto and now can not on...

Nokia E7 switch off auto and now can not on...  also it not charging ... what is the problm .. ?? please give me some solution for this ... ASAP... 

Ok first try hold the menu button down for around 8 seconds.
If that fails hold the Menu, volume down and camera buttons down when powering on and dont let go until you feel the phone vibrate.
this will wipe all data of phone...
if this fails its off to a nokia care point
If  i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

  • Just upgraded and now can not update contacts

    I upgraded to the new iPhone software last night and now can not edit contacts.  Help!

    Hi icsailor,
    This sounds like a known issue reported here:
    https://bugzilla.mozilla.org/show_bug.cgi?id=713014
    There was a workaround posted, but I've not tested it myself. Here are the steps.
    # Go into Yahoo Messenger Options - Change the Window in the dropdown to Tab and press OK.
    # Then go back and switch it to small window and press OK.
    Once the bug is officially resolved, you could try running a Nightly or Aurora build to use the fix early.
    Hopefully this helps!

  • In Firefox can not see the Downloads window, in the jump in the boot to be seen - the download speed Downloaded much and now can not see how to fix it?

    in Firefox can not see the Downloads window, in the jump in the boot to be seen - the download speed
    Downloaded much and now can not see how to fix it?

    I hate the new downloads-in-a-tab scheme. This was an unnecessary change in my book (if it aint broke, don't "fix it").
    So in order to get it back, I performed the about:config browser.download.useToolkitUI change, but now all I get is a blank download window that pops up every time I download something.
    Is there something else that I need to do? I've checked the change and it was saved, but it didn't resolve my issue as much as it just caused me a new issue.

  • I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films.

    I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films, but can not listen to my music or show photos. Can anybody help please?

    I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films, but can not listen to my music or show photos. Can anybody help please?

  • Downloaded Firefox 4 to my Mac OS10.5.8 and now can not open Firefox.

    Downloaded Firefox 4 to my Mac OS10.5.8 and now can not open Firefox. The processor is 1.25 GHz Power PC G4 and 768 MB DDR SDRAM memory. Is it possible to go back to an earlier version that was running very well on my Mac?

    Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
    If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

  • Hello buy a movie on apple tv, and now can not find the device tells me I should go to settings / downloads / check downloads, but that does not exist in the menu of the apple tv, please help

    Hello buy a movie on apple tv, and now can not find the device tells me I should go to settings / downloads / check downloads, but that does not exist in the menu of the apple tv, please help

    Welcome to the Apple community.
    A number of people have reported similar issues recently, many appear to have found a discrepancy of some kind in their account settings and making changes to these settings or simply resetting them has resolved the matter.
    Check your account details are correct, check that you are using the correct details for Location, Region and Time Zone. You may want to change these settings and then change them back to see if that helps.
    You might also try logging out of and then back into your iTunes account (Settings > iTunes Store > Apple ID’s > Sign Out) and restarting your router. (Some have reported that after doing this, they need to check for rentals even though it may report that there aren’t any, after which rentals once again appear in the ‘movies’ feature)
    Rentals should appear under their own heading in the ‘Movies’ feature, you might also check at Settings > iTunes Store > Check For Rentals.

  • My wife uploaded new fonts to her macbook and now can not see any writing on her screen, can I fix this?

    Hi, my wife uploaded new fonts to her macbook and now can not see any writing on her screen, can I fix this?
    System fonts deleted accidentally. Does anyone know how I can fix this please?

    Thanks Mike,
    Absolutely right. I restarted in Safe Mode. This enabled me to see the actual text on the screen. Then I backed up. Then reinstalled. All fixed.
    Thanks again,
    Chris

  • I received an Keynote update notice on my Mac Air. I updated and now can not get into my saved keynote docs. I am being asked to upgrade again and purchase the upgrade. Anyone else having this issue?

    I received an Keynote update notice on my Mac Air. I updated and now can not get into my saved keynote docs. I am being asked to upgrade again and purchase the upgrade. Anyone else having this issue?

    Try this repair, ensure you complete all the tasks and in the order shown:
    1  delete all the iWork applications if you have them, not just Keynote, use Appcleaner from Mac Update to           do this, its freeware
    2  restart the Mac;   Apple menu > restart
    3  immediately after the start chime,  press the shift key until you see the Apple symbol.
             let it fully boot up,  it will take longer as the OS is repairing the drive
    4  when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive  then First Aid tab and           click  repair disc permissions
    5  when complete, restart the Mac normally
    6  install Keynote from the Mac App Store
    Please report back to let us know if this helped.

  • I have Nortons security suite under the old version the Idenity protection worked I kept all my passwords under this which used a master pasword I did not save passwords any were else and now can not get it to work supplying passwords for my l0gon site.

    I have Norton's security suite under the old version the Idenity protection worked. I kept all my passwords under this which used a master pasword I did not save my passwords any were else and now can not get it to work supplying passwords for my logon site.

    Symantec need to correct a mistake they made with their add-ons. They originally updated their add-ons after quite a delay to work with Firefox 4.0 as shown here - http://community.norton.com/t5/Norton-Internet-Security-Norton/Firefox-4-compatibility-hotfix-is-now-available/td-p/428894
    They made an error with the update in only listing it as compatible with Firefox 4.0, so they will not install on Firefox 4.0.1 and subsequent Firefox security updates. Symantec have indicated they will be releasing an update to correct their error soon, for details see http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-Toolbar-not-compatible-with-FF-4-0-1/td-p/442788/page/12

  • Switched startup disc and now can't start...

    i tried to boot up from an old disc warrior cd, and couldn't. i switched the startup disk in sys pref, and now can't start the computer at all (i keep getting the message "you need to restart your computer...") now i know i need a new version of DW, but how do i start up from my hard drive??
    Thanks.

    Here's something that should work:
    Restart the computer in single-user mode by pressing and holding down COMMAND-S immediately after the chime until the computer starts to a black screen with white print. At the prompt enter the following commands pressing return after each:
    prompt> /bin/df
    (to get the /dev name of the drive)
    prompt> /usr/bin/hdiutil eject -force /dev/drivename
    (where you got drivename from df)
    If you are successful you can restart the computer by entering "reboot" at the prompt (without the quotes) and pressing return.
    If you are not comfortable using the command line you can also eject the disk manually by inserting a straightened large paperclip into the small eject hole located on the side of the optical drive slot.

  • I just updated my IPad to iOS 5 and now can not send email. The error message says the server rejects the address which is not true Asti sends on my desktop.

    I just updated my iPad to iOS 5 and now can't send email- I have tried the obvious but no luck. Any suggestions?

    Usually 'authentication required' means that you need to submit a username (or e-mail address) and password to the e-mail server, when sending a message. This logic is not different between Outlook and Thunderbird, and even with the latest and previous version of Thunderbird.
    Of course you can try the previous version again to see if it solves the problem, although you'll be less secure because you would be missing the latest fixes.
    If you'd be willing to get back to Thunderbird, say if your frustration level with your new app would increase too much, please see our article [https://support.mozilla.org/en-US/kb/cannot-send-messages cannot send messages] for further help.
    In all other cases I'd appreciate it if you could mark this as answer so we know you don't need further help.

  • Down loaded adobe x and now can not open recently viewed files

    I downloaded the new version of adobe but I now can not open any files. I get a white screen and windows task manager says adobe in not responding.
    Any suggestions. Thanks.

    Adobe has magically started to run again. I had the program running with just a white screen and after about a 10 minute delay it seems to be ok.
    I hope that is the end of the problem. I have no idea what the problem was, maybe it was doing an internal update , I am not a computer whiz.

  • I Beta tested 4.0 RC1 and now can not upgrade to 4.0. Error message is need to reboot to complete prior instalation. Have removed all previous versions of Firefox, rebooted and still same error message.

    I Beta tested up to and including 4.0 RC1 without major problems. However I can not now upgrade to 4.0. Same error message time and again, "need to reboot to complete prior upgrade instalation". I rebooted several times, then tried first removing all previous versions of Firefox using both MS Add/Remove and then iolo System Mechanic, then again downloading 4.0. Even after rebooting same error message. I can not therefore install/use Firefox.

    Do a clean (re-)install:
    * Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 4.0: http://www.mozilla.com/firefox/all.html
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Don't remove personal data if you uninstall the current version.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • I just updated my iTunes and now can not access it at all. I click on the icon and it flashes, then nothing.

    Hello,
    I installed the updates that iTunes has been bugging me to install for a long time now and now I can't access iTunes at all.
    Also, my mac is now extremely slow in opening other programs.
    I've rebooted the computer twice.
    Thanks,

    Hi thanks i just finished uninstalling itunes, i restarted my computer and then reinstalled itune and now the ipod is being recongnised but i tells me "this ipod can not be used because the apple mobile device is not started"what does this mean?
    my ipod is on!

  • I try to restore my iphone in recovery mode but didn't get it and now can not come out of recovery mode please help me

    Hi I had perches one iphone4 from Hong Kong last month but after coming back i try to restore my iphone but it's give error 3194 then i try to restore it in recovery mode but still can not restore error -1 and now i cannot get out of recovery mode please help me to shovel this problem.

    Are you running modified software on your phone?  This error seems to be common if the firmware has been modified and you're trying to restore the phone again. 

Maybe you are looking for

  • Trying to install Visio Professional 2013 on 64 bit machine but install says I have 32 bit office

    I am Trying to install Visio Professional 2013 on 64 bit machine but when I try to install it says I have 32 bit office already installed.  How do I know if I have 32 bit Office installed, and if so how do I change it to 64 bit. And how do I install

  • Best way to include a jpg file in a project (where to locate the file)

    Inside of my main VI - I am "building a path to the current VIs" directory where I have a jpg file. This jpg file displays fine when running this VI.  To do this I get the current path, strip the VI name and then add the jpg name to the path. Now whe

  • X61 - System Recovery

    I want to use the Lenovo System Recovery (no CD/DVD, but straight from the hidden partition). I have no backup whatsoever, hence I want to use the system recovery without using a backup source. Additionally to the C partition where Vista resides, I h

  • Maintenance Orders

    hi When i am setling the plant maintenance orders. A controling document is being posted, i think this is not correct. please explain whats is wrong. I have one activity type MAINT which is being used by Product cost collector and Maintenance orders.

  • Is it mandatory to create a project for every enhancement?

    Hello Gurus, I have written some code in one user exit. Now i have activated it and it is working fine. I wanted to know. is mandatory to create a project(in CMOD) for every user exit? Also what is the functionality of the project?