Nokia e71, i lost my packet data access point. how...

back when i didnt have a data plan, i deleted the packet data access points, but now that ive upgraded i cannot seem to find those points back. can anyone help me out?

I guess you can call up your service provider customer service and ask them to re-send the settings!

Similar Messages

  • HELP! Ovi Suite "Packet Data Access Point Not Vali...

    So i downloaded Ovi suite to get internet from my phone i have a Nokia 3711 and when i try to connect i get this message on my phone "Packet data access point not valid" what does this mean? and how can i fix it? I have unlimited internet data thing..

    I guess you can call up your service provider customer service and ask them to re-send the settings!

  • E63 Packet data Access point set to None? What hap...

    What happens when Packet Data>Access point is set to None(blank)? I tried to tether with my phone and I was connected to the internet for a moment. Checked my ip and it turns out it's through my mobile phone companies subnet.
    However via the Bluetooth DUN setup on my computer I specifid a computer and login information which it seemed to ignore? Can anyone explain this strange situation?
    The phone I'm using is an E63 GSM phone.

    that will work. You only need to change if you need to have always on (highly unlikley) or if you are using modem dial up and need to specify access point for that.
    If you using Nokia One Touch access then you don't even need to define access point in this menu as that application will take care of it for you.
    All other network aware applications will use access point settings as defined in settings menu.

  • N70 Packet Data/Access Points?

    I got my phone from a friend about a year ago. He had a Telstra sim card in it, but I had a Vodafone. So I put my sim card in, but the MMS wouldn't work. So I changed a few settings and managed to fix it.
    However, my phone recently had it's memory wiped, including all the setting changes I made.
    But now the MMS isn't working again!
    I tried to change the packet data/access point stuff, but it doesn't come up with anything to do with Vodafone...only Telstra.
    Please help?

    Hi, just go to your local nokia website. Settings can be ordered from the support section. Settings will be sent to you by sms.

  • Packet data access point not vail

    Hello,please i need help,any time i try to connect my phone my pc the responce is always packet data not avil. what should i do to get rid of the problem

    that will work. You only need to change if you need to have always on (highly unlikley) or if you are using modem dial up and need to specify access point for that.
    If you using Nokia One Touch access then you don't even need to define access point in this menu as that application will take care of it for you.
    All other network aware applications will use access point settings as defined in settings menu.

  • Packet Data Access Point Names vs real data server...

    I am trying to activate an application that requires GPRS.
    I currently can get EGPRS and assume that will do the same but faster. But I have a question that may not pertain to this but as I am new at this I will ask it here. From reading I see that the settings of packet data appear to have more to do with setting up phone as a modem to use. So I don't know truly if this has any bearing on my problem with the software registering to complete the setup of it.
    However my web access which is unlimited month to month internet access which allows me to go anywhere on web (not a walled garden) also uses this GPRS or EDGE version of GPRS. I am in the USA with T-Mobile. Phone is set to use GSM. The screen where it concerns connectivity says that I have Access Points which were configured by T-Mobile sms file they sent me twice. I actually have 5 names under Access Points.
    1)MMS = wap.voicestream.com
    2)T-Mo WEB = Internet.voicestream2.com with small i in settings
    3)T-Mo WEB(01) - this from 2nd sms copy same
    4)T-Mobile Internet = Internet.voicestream2.com with small i in settings too.
    5)t-zones this is their wall garden = wap.voicestream.com
    ok since I can browse the web anywhere and download the application I don't know why I cannot register it. But it states it needs an internet connection before activation through authentication, or basically registering it to use.
    So I am trying to do this after verifying that I have an internet connection with the too connection arrows symbols on phone screen showing internet connectivity with E over them currently by starting a browser first as the application doesn't seem to do this for me when trying to activate it.
    E
    --> where the lines are solid. Ok here is my issue here.
    The arrows are not coming up correctly in this forum anyway I get what shows I have EGPRS connectivity, I don't know if the application is sensitive to using GPRS only but will find out. I doubt it. The GPRS would show the arrows with an antennae above. I am talking about the indicators from what the pdf and book say.
    Below Access Points on the menu in settings for connection is Packet data.
    Packet data has to variables
    1) when needed , or when available
    2) Access point
    Access point is blank. Should I enter one of T-Mobiles names in the list above this under Access Points such as
    T-Mobile Internet or should I put the server name in specifically internet2.voicestream.com?
    I set the Data Call setting to Unlimited to make sure if its using this process it doesn't turn off after the 5 minute default on the next setting.
    Any ideas why this gprs app is not activating itself and making the gprs internet connection with the pin I was provided? I had to use the pin just to download it and install it.

    that will work. You only need to change if you need to have always on (highly unlikley) or if you are using modem dial up and need to specify access point for that.
    If you using Nokia One Touch access then you don't even need to define access point in this menu as that application will take care of it for you.
    All other network aware applications will use access point settings as defined in settings menu.

  • I have updated my 4s iphone to ios 6.1.3 and have trouble connecting it to wi fi . i tried to back up it on itunes and then restore it but now i have left with a phone that still doesnt connect to wi fi and  lost all my data. anyone knows how to fix it?

    i have updated my 4s iphone to ios 6.1.3 and have trouble connecting it to wi fi . i tried to back up it on itunes and then restore it but now i have left with a phone that still doesnt connect to wi fi and  lost all my data. anyone knows how to fix it?

    If no change after restoring the iPhone with iTunes as a new iPhone or not from the backup, there is a hardware problem.

  • Nokia C3+Wifi+subscribe to packet data first

    Hi all I need help with connecting to the net with my Nokia C3 using Wifi, I did have Ver 3.something and I was able to download Apps and games no problem using Wifi but today I updated the phone to Ver 08.63 and now I keep getting "subscribe to packet data first" I did call my provider and they told me it is nothing they did.
    Moderator's note: The post was moved to the most appropriate board.
    Solved!
    Go to Solution.

    Re: nokia c3 wlan
    ‎04-07-2010 21:04
    TO ANYONE EXPERIENCING THIS PROBLEM I HAVE FOUND A SOLUTION!!!!!
    I have had this phone for a week and the WLAN has been very problematic!
    To stop the phone from connecting to the GPRS instead of using the WLAN you must...
    - Change all the settings to 'ASK FIRST', this includes the internet connection under connectivity and within the saved WLANS, each must have ask first selected.
    - You must edit the packet data settings (under connectivity), it must say 'when needed' and then you must change the access point to a different point, e.g. Access point , then edit this access point, the alias can be anything (it is just a name), but the access point must be changed to the WLAN access point you are trying to connect to.
    To find this access point code you must go to ...
    Menu - settings - connectivity - WLAN - available wlans - then click edit on the WLAN you want to use. Look under 'Access point MAC', this should be a long list of numbers and letters separated by colons e.g. 1A:2B:3C:4D:5E:6E.
    This works at home because you can save the WLAN and use the preferred access point, to make this work for 'hot spots' you will probably have to write down the access point code from the WLAN you want to use and create a new access point and change access points when you are using a different connection.
    This works by saving specific access points to available WLAN locations.
    Moderato'r note: The email address was pulled out. Posting of personal info in this forum is not allowed.

  • Nokia C3-01 & subscribe to packet data first.

    Hello !
    I have a nokia c3-01, I am not able to connect to the internet using WLAN, it says subscribe to packet data first. 
    can anyone help me on this.
    Thanks.

    Go to menu-settings-configuration settings-personal settings- my web. Do not enter any data in any field & press back. Do again with my access point. Now select these two as active settings & access point. Now go to connectivity-wlan. Search & save your wlan. Set the connection to do not ask. You will be able to connect using wlan only.
    Please mark the post as solution if it solves your problem.
    Current Device - Nokia Lumia 1020/920

  • Nokia E71, No boot after Up-date

    I have updated my Nokia E71 and right after I realized my phone was actually switched off eventhough the software update was successful (I had the screen on my PC so I guess it went to the end).
    And since, the phone doesn't want to turn on (when I turn it on, there is the background light for 1 or 2 minutes and then it went back to dark again, no sound, no animation).
    I recharge the battery and tried many things but nothing work. 
    What could I do?
    Thanks,

    Hi avign
    As "psychomania" so rightly says, I can confirm that on E71 you depress the (Y/3), (U/*) and Green (call) buttons all at the same time then power on.
    You will find this procedure detailed in Paragraph 45 of FAQ to Nokia Software Updater here:http://europe.nokia.com/A4577229#faq45
    If it is of any consolation to you my E71 "died" when updating firmware to v210.21.006 a few days ago and the above rescued the situation and allowed it to complete. 
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Nokia Internet Radio unable to choose Packet Data ...

    Hi,
    I have just downloaded the Nokia Internet Radio v1.04 to my N95 8GB (v20.0.0.16). It works fine over WLAN but doesn't even display the Packet Data access points (O2 Postpay WAP & O2 Postpay WAP) when I go to settings or when it starts up.
    I have tried uninstalling and reinstalling but that hasn't cured it. I'm not sure how much data was deleted during the uninstallation though as the favourites I have added are still there even after the re-install!
    Has anyone had a similar fault?
    Thanks

    Hello
    I got the same problem.
    Have u solved this issue?
    If so , tell me how.
    Thanks
    Kelson

  • How do I subscribe to packet data first on my Noki...

    I am trying to get onto the wap using a Nokia 7373 i have has my settings set via Nokia but its saying ' subscribe to packet data first' what is this and how do i do it?
    Many Thanks

    Once you are downloading and installing the GPRS from your Service Provider you are subscribing the Packed Data. The full form of abbreviated GPRS = General Packed Data Radio Service. Your problem is a problem with "Configuration" in the Handset. All you need to select NO from PERSONAL CONFIGURATION SETTING by following the path : Main Menu>Settings>Configuaration>Personal Configuration Settings.
    Input Data : Personal Account  : JAVA    click the java
    Home Page : www.google.co.in
    User Name : ppp
    Password : ppp123
    Use Preferred access point : YES
    NOW GO BACK TO CONNECTIVITY Menu item.
    Select : Packet  Data
    CLICK THE ITEM    : PCKET DATA SETTING 
    Put against Active  Access Point : Data Bearer  Packet Data                                                         Put against the item 'Alias for access  point'  :  Data Bearer Packed Data.                                 Put against item 'PACKET DATA ACCESS POINT' :  gprseast.cellone.in

  • 6212 NFC & AT&T - Packet Data Problem

    I have a Nokia 6212 Classic.  I just put an AT&T (california) sim chip in it for the first time.  Cell works, text works.  but Internet says "Must subscribe to packet data first".  I called at&t and they were not helpful (big surprise), all they could say is that i am subscribed.
    Does anyone know what the packet data settings are to do it manually?  Cingular was wap.cingular
    Thanks!
    Frustrated

     Go into Settings.  Go into Configuration.  Go into Personal Configuration Settings.  Now, press Add New (visible if you don’t have a previous Personal Setting created) or press the Options button. When you have pressed the Options button, choose Add new.  When you have pressed Add New, you will get a new menu, which will give several options to choose from.  Now, scroll down and choose the Access Point and press Select. (Please note that this option is not available on the Nokia 3220 model and maybe on some more models, you can instead use the Services option instead of the Access Point option on the Nokia 3220.) Do not choose the Web option, since this will not work with Opera mini.  Now go into Access Point Settings.  Go into Bearer Settings.  Go into Packet Data Access Point.  Now, enter you APN address corresponding to your provider. Then press OK.  Go back to the Personal Configurations Settings menu, where you now should be able to see an Access Point selected.  Now press the Options button, and then choose to activate this Access Point.  Now you should be able to start Opera Mini, and all other internet based applications.

  • C3-01 Packet Data explanation needed

    Can someone explain how the packet data function works on the C3-01 and what all the submenus under the connectivity menu mean.  The manual does not cover any of this.  I only want to connect via WiFi and do not want the phone to be able to access or download any data via GSM at all.

     Go into Settings.  Go into Configuration.  Go into Personal Configuration Settings.  Now, press Add New (visible if you don’t have a previous Personal Setting created) or press the Options button. When you have pressed the Options button, choose Add new.  When you have pressed Add New, you will get a new menu, which will give several options to choose from.  Now, scroll down and choose the Access Point and press Select. (Please note that this option is not available on the Nokia 3220 model and maybe on some more models, you can instead use the Services option instead of the Access Point option on the Nokia 3220.) Do not choose the Web option, since this will not work with Opera mini.  Now go into Access Point Settings.  Go into Bearer Settings.  Go into Packet Data Access Point.  Now, enter you APN address corresponding to your provider. Then press OK.  Go back to the Personal Configurations Settings menu, where you now should be able to see an Access Point selected.  Now press the Options button, and then choose to activate this Access Point.  Now you should be able to start Opera Mini, and all other internet based applications.

  • 6021 Subscribe to packet data for Vodafone contrac...

    Can anyone help me? I'm trying to get my Nokia 6021 to bluetooth connect to my HP Ipaq 2210. My phone is on a contract basis with Vodafone and I keep getting the error "please subscribe to packet data" when the two pieces of hardware connect. I can browse the web on my mobile but it will not allow my phone to connect to the IPAQ. Currently the active access point is set to "internet", which I think is incorrect but I don't know what else it should be!!? Vodafone have been no use!!! I'm running out of options. Thanks for any help.

    I have the same problem attempting to connect with an iPAQ (hx4700) via a 8800 to GPRS and it constantly makes the bt connection, shows the big "G" top LHS for a short while and then gives error "packet data access point not valid". My Service Provider is O2.
    The bluetooth connection seems fine, and I can successfully use my laptop with bluetooth via the 8800 to GPRS but I cannot figure out why on earth the iPAQ keeps provoking this error message on the Nokia 8800. Has anybody had the same trouble and found a solution?
    FYI the PC Suite between the laptop and 8800 works fine (with the exception of MESSAGES which keep duplicating and for which i have given up trying to find a solution. Nokia is not much help.

Maybe you are looking for

  • Execute GET_SEARCH_RESULTS service in doFilter method

    Hi everybody, I would like to copy "template file" into primaryFile by CHECKIN. The "template file" is saved in the UCM. I use custom component and now i run "doFilter" method. First step in doFilter method is GET_SEARCH_RESULTS service. I found this

  • Check for updates always pops up file dialogue

    My iPhone is connected and I have updated to iTunes 10.5, but everytime I click the check for update button it brings up the file selection dialogue as if I had option+clicked it.  I can't find an obvious cause for this sort of behavior, but I would

  • Importing new Address Book into Address Book but keeping it separate.

    I have an existing Address Book on my MacBook Pro and would like to import my office Address Book - BUT keep it as a separate group.  The office Address Book has over 1,000 names so it is a lot of work to import it and then, one by one, find, separat

  • Joining Multiple CDs into One Track

    I listen to books on CD. When I rip each CD I join the tracks to get one track for each CD. Is there a way to join all 8 or 9 CDs into one big single track so I will have only a single track for the book? It would be easier to bookmark a single track

  • InvalidUrlRuntimeException using the LinkToUrl-Control

    Hello, I have built a view containing a LinkToUrl control. The control is being filled with an URL that points to a document in an archive system for documents. The given Link is only valid for one hour starting at the the time of its creation. My pr