NOKIA E71 "malbox' in use error message cannot sen...

Hi,
I have a Nokia E71 and cannot send emails from the gmail or pop 3 accounts set up on the device.
I can recieve emails and I know the settings are correct for the incoming and outgoing servers.
A google search has shown a number of people had this problem but I can't see any solutions.
An hour on the phone to Nokia care resulted in checking I have the correct system software on the phone ( I do).
Can any one help this problem?

Sometimes, internet service providers block access to any SMTP servers but their own over their networks. If you are sending via mobile internet then that could be the problem, try with your network operator's SMTP server (I have two mailboxes set up on my phone, one using my ISP's SMTP for when I connect via WLAN and one using the Proximus server for when I use GPRS/3G).

Similar Messages

I am using a 2003 eMac and am running on Mac OSX vs 10.4.11. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message: Cannot complete i Tunes Store request. A required iTunes com

I am using a 2003 eMac and am running on Mac OSX vs 10.4.11. I amrunning iTunes 8.2.1 (6) and not able to upgrade iTunes on this computer. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message:
Cannot complete iTunes Store request. A required iTunes component is not installed (-42404)
Please help.

Is this music purchased back in DRM days? I don't actually have any iTunes music so I can't test with my iTunes 7.5, but I know that without iTunes 10 you cannot even connect to the store anymore. I wouldn't think that would require an active connection to the store all the time, otherwise how could you play music on a computer in the middle of nowhere? Did you do something to trigger iTunes suddenly wanting to connect and check on machine authorization?

I'm trying to make a cd from my itunes. I get error message "cannot be used because it is not recognized.

I'm trying to make a cd from my itunes. I get error message "cannot be used because it is not recognized.

I just figured it out. All I had to do was close out of iTunes then restart.

Acrobat X, error message "cannot delete pages, pages are in use"

Recently updated to Acrobat X. After saving a pdf, if I try to delete a page or pages, I get an error message "cannot delete pages, pages are in use". I have to close acrobat and reopen my document to continue deleting pages. Is there a fix for this? So far, I think Acrobat 7 was better that X!!!!!!!!!!!!!!!!!!

What OS are you using? Ive read that preview pane in windows vista and 7 causes an issue with the delete page feature. The suggestion was generally to turn the preview feature off.
Heres technet article on turning off the feature:
http://social.technet.microsoft.com/Forums/en/itprovistadesktopui/thread/d2a9c302-1ef1-4d9 8-9e81-a88603ae8405

I'm using a Mac. When I tried to open my iPhoto library in Elements I get the error message "cannot complete request PE doesn't recognize this type of file"?

I use a Mac. When I try to open my iPhoto Library in Elements I get the error message "cannot complete request, PE does not recognize this type of file." The import option only allows me import a "frame from Video"?

You can't use iPhoto that way. Poking around in the iphoto library from outside iphoto is just begging for trouble, the fastest way to corrupt your library and lose all your images.
You have two choices with iphoto:
1. Set PSE as your external editor and send the photos from iphoto. Save, never save as, and don't change the name or format and iphoto will remember your last saved edits and the original, although you have to lose the edited version to revert to the original. This doesn't work with raw files.
2. Export the photos from iphoto, use File>Open in PSE and then you can make all the changes to name and format that you want. Then import the saved edited version to iphoto as a new file.

Error message "cannot use the spot healing brush because the scratch disks are full. What does this mean? PSE9

Tried to use the spot healing brush and clone stamp and got error messages "cannot use because the scratch disks are full." What does this mean? PSE9

Elements uses drive space to make its calculations, like someone writing down measurements on a scrap of paper. How much free space is there on your hard drive?

Getting error message Cannot Resolve Symbol when trying to compile a class

Hello All -
I am getting an error message cannot resolve symbol while trying to compile a java class that calls another java class in the same package. The called class compiles fine, but the calling class generates
the following error message:
D:\Apache Tomcat 4.0\webapps\examples\WEB-INF\classes\cal>javac
ConnectionPool.java
ConnectionPool.java:158: cannot resolve symbol
symbol : class PooledConnection
location: class cal.ConnectionPool
private void addConnection(PooledConnection value) {
^
ConnectionPool.java:144: cannot resolve symbol
symbol : class PooledConnection
location: class cal.ConnectionPool
PooledConnection pcon = new PooledConnection(con);
^
ConnectionPool.java:144: cannot resolve symbol
symbol : class PooledConnection
location: class cal.ConnectionPool
PooledConnection pcon = new PooledConnection(con);
The code is listed as follows for PooledConnection.java (it compiles fine)
package cal;
import java.sql.*;
public class PooledConnection {
// Real JDBC Connection
private Connection connection = null;
// boolean flag used to determine if connection is in use
private boolean inuse = false;
// Constructor that takes the passed in JDBC Connection
// and stores it in the connection attribute.
public PooledConnection(Connection value) {
if ( value != null ) {
connection = value;
// Returns a reference to the JDBC Connection
public Connection getConnection() {
// get the JDBC Connection
return connection;
// Set the status of the PooledConnection.
public void setInUse(boolean value) {
inuse = value;
// Returns the current status of the PooledConnection.
public boolean inUse() {
return inuse;
// Close the real JDBC Connection
public void close() {
try {
connection.close();
catch (SQLException sqle) {
System.err.println(sqle.getMessage());
Now the code for ConnectionPool.java class that gives the cannot
resolve symbol error
package cal;
import java.sql.*;
import java.util.*;
public class ConnectionPool {
// JDBC Driver Name
private String driver = null;
// URL of database
private String url = null;
// Initial number of connections.
private int size = 0;
// Username
private String username = new String("");
// Password
private String password = new String("");
// Vector of JDBC Connections
private Vector pool = null;
public ConnectionPool() {
// Set the value of the JDBC Driver
public void setDriver(String value) {
if ( value != null ) {
driver = value;
// Get the value of the JDBC Driver
public String getDriver() {
return driver;
// Set the URL Pointing to the Datasource
public void setURL(String value ) {
if ( value != null ) {
url = value;
// Get the URL Pointing to the Datasource
public String getURL() {
return url;
// Set the initial number of connections
public void setSize(int value) {
if ( value > 1 ) {
size = value;
// Get the initial number of connections
public int getSize() {
return size;
// Set the username
public void setUsername(String value) {
if ( value != null ) {
username = value;
// Get the username
public String getUserName() {
return username;
// Set the password
public void setPassword(String value) {
if ( value != null ) {
password = value;
// Get the password
public String getPassword() {
return password;
// Creates and returns a connection
private Connection createConnection() throws Exception {
Connection con = null;
// Create a Connection
con = DriverManager.getConnection(url,
username, password);
return con;
// Initialize the pool
public synchronized void initializePool() throws Exception {
// Check our initial values
if ( driver == null ) {
throw new Exception("No Driver Name Specified!");
if ( url == null ) {
throw new Exception("No URL Specified!");
if ( size < 1 ) {
throw new Exception("Pool size is less than 1!");
// Create the Connections
try {
// Load the Driver class file
Class.forName(driver);
// Create Connections based on the size member
for ( int x = 0; x < size; x++ ) {
Connection con = createConnection();
if ( con != null ) {
// Create a PooledConnection to encapsulate the
// real JDBC Connection
PooledConnection pcon = new PooledConnection(con);
// Add the Connection to the pool.
addConnection(pcon);
catch (Exception e) {
System.err.println(e.getMessage());
throw new Exception(e.getMessage());
// Adds the PooledConnection to the pool
private void addConnection(PooledConnection value) {
// If the pool is null, create a new vector
// with the initial size of "size"
if ( pool == null ) {
pool = new Vector(size);
// Add the PooledConnection Object to the vector
pool.addElement(value);
public synchronized void releaseConnection(Connection con) {
// find the PooledConnection Object
for ( int x = 0; x < pool.size(); x++ ) {
PooledConnection pcon =
(PooledConnection)pool.elementAt(x);
// Check for correct Connection
if ( pcon.getConnection() == con ) {
System.err.println("Releasing Connection " + x);
// Set its inuse attribute to false, which
// releases it for use
pcon.setInUse(false);
break;
// Find an available connection
public synchronized Connection getConnection()
throws Exception {
PooledConnection pcon = null;
// find a connection not in use
for ( int x = 0; x < pool.size(); x++ ) {
pcon = (PooledConnection)pool.elementAt(x);
// Check to see if the Connection is in use
if ( pcon.inUse() == false ) {
// Mark it as in use
pcon.setInUse(true);
// return the JDBC Connection stored in the
// PooledConnection object
return pcon.getConnection();
// Could not find a free connection,
// create and add a new one
try {
// Create a new JDBC Connection
Connection con = createConnection();
// Create a new PooledConnection, passing it the JDBC
// Connection
pcon = new PooledConnection(con);
// Mark the connection as in use
pcon.setInUse(true);
// Add the new PooledConnection object to the pool
pool.addElement(pcon);
catch (Exception e) {
System.err.println(e.getMessage());
throw new Exception(e.getMessage());
// return the new Connection
return pcon.getConnection();
// When shutting down the pool, you need to first empty it.
public synchronized void emptyPool() {
// Iterate over the entire pool closing the
// JDBC Connections.
for ( int x = 0; x < pool.size(); x++ ) {
System.err.println("Closing JDBC Connection " + x);
PooledConnection pcon =
(PooledConnection)pool.elementAt(x);
// If the PooledConnection is not in use, close it
if ( pcon.inUse() == false ) {
pcon.close();
else {
// If it is still in use, sleep for 30 seconds and
// force close.
try {
java.lang.Thread.sleep(30000);
pcon.close();
catch (InterruptedException ie) {
System.err.println(ie.getMessage());
I am using Sun JDK Version 1.3.0_02" and Apache/Tomcat 4.0. Both the calling and the called class are in the same directory.
Any help would be greatly appreciated.
tnx..
addi

Is ConnectionPool in this "cal" package as well as PooledConnection? From the directory you are compiling from it appears that it is. If it is, then you are compiling it incorrectly. To compile ConnectionPool (and PooledConnection similarly), you must change the current directory to the one that contains cal and type
javac cal/ConnectionPool.

Keep getting the error message "cannot connect to iTunes..." error message (-3212)??, keep getting the error message "cannot connect to iTunes..." error message (-3212)??

I keep trying to upgrade my iPad using iTunes..The error message "cannot attach to iTunes store...error message (-3212). Suggestions?

I get that problem once in a while and I will not be able to connect to the Internet with any of the 5 or 6 (or 7 or 8 ) web browsers that I use on my iPad. The one thing that I do that has never failed to work for me is to close all apps on my iPad and reset the device. I can't guarantee that it will work for you, but this works for me every time I get the server failed to load/can't connect to the Internet message.... Or whatever the exact message is.
If you have a ton of apps in the multitasking display, it can take a while to close them all, so you could just trey resetting the iPad first and that might be all that you need to do.
Closing apps in iOS 7 works like this. Drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

When packaging a file in indesign - Error message - Cannot copy necessary linked file(s)

When packaging a file in indesign - Error message - Cannot copy necessary linked file(s)

Can you select all Links in the Links Panel
Use the Flyout Menu on the top right of panel.
Choose "Utilities>Copy Links to"
And see if that works.

Error message "cannot locate file"

I purchased a new computer and used Detto Intelli Mover to transfer all my music files. When I opened the library, they all appeared to be there, but when I try to plan anything I get an error message "cannot locate file" This happens with all of my 1,200 songs. The error message also says "would you like to look", but I am unable to locate then. Can anyone help with this?

Have you added all the songs to the library? Just by dragging and dropping?

Error message "cannot connect to server"

Often I get an error message "cannot connect to server" when
I want to connect to acrobat.com directly from a .pdf document in
order to upload it . Is it possible that there is some security
issue involved, e.g. that the document is protected somehow? Or
could browser or firewall settings be involved?

Hi Peterernst,
Thanks for posting.
Perhaps yes, firewall, and browser popup blockers have been
known to cause some behavioral, and connectivity issues within
Acrobat.com
Users have had success with allowing *.acrobat.com as a
trusted site locally, to see if that allows connectivity.
Also what browser, and OS are you using?
If still in the Unix environment, do you have access to a
Windows, or Mac environment?
Thanks!
Pete

Download error message - "Cannot Create File"

Recently I developed a problem and am unable to download anything (files, software, etc) from any website. I begin a download, the download manager comes up and it shows an error message "Cannot Create File." I am using the default manager that is incorporated in OS X 10.3.9.
I never had a problem until a week or so ago when I downloaded a software demo. I decided to get the full software package and trashed the demo files per the company's instructions. I got the error message when I tried to download the full program and now get the message no matter what I attempt to download. Might I have trashed a file I wasn't supposed to trash?
I tried installing 10.3.9 again on my main drive but still have the problem. If I use an external hard drive with spare copy of 10.3.9 and make that my start up drive, I can download files successfully.
Any help would be greatly appreciated.
Dave
2002 DP 1GH Quicksilver Mac OS X (10.3.9)

Recently I developed a problem and am unable to
download anything (files, software, etc) from any
website. I begin a download, the download manager
comes up and it shows an error message "Cannot Create
File." I am using the default manager that is
incorporated in OS X 10.3.9.
I never had a problem until a week or so ago when I
downloaded a software demo. I decided to get the full
software package and trashed the demo files per the
company's instructions. I got the error message when
I tried to download the full program and now get the
message no matter what I attempt to download. Might I
have trashed a file I wasn't supposed to trash?
I tried installing 10.3.9 again on my main drive but
still have the problem. If I use an external hard
drive with spare copy of 10.3.9 and make that my
start up drive, I can download files successfully.
Any help would be greatly appreciated.
Dave
2002 DP 1GH
Quicksilver Mac OS X (10.3.9)
I have the same problem ! Not being able to download a file from the Adobe site. I need Reader 7 to download some files from exact exams but can't do it. Just keep getting the Cannot Creat File message in the download window. Can anyone help?
eMac 1.25 & G4 800 iBook Mac OS X (10.4.5)
eMac 1.25 & G4 800 iBook Mac OS X (10.4.5)

Bearts Audio Control Pannel will not open. Get error message cannot find startup file

Bearts Audio Control Pannel will not open. Get error message cannot find startup file!
Downloaded and instaled up-date for IDT audio from driver up-date. After installation could no longer oppen Beats Audio Control Pannel. Looked for download to re-install BEATS Audio but cannot find one.
Any suggestions.
Sound works with IDT driver installed.
Pavilion P7-1500Z

Hi,
Try using Recovery Manager to reinstall the IDT HD Audio Driver ( this will also reinstall the Beats Audio interface ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
Recovery Manager - Windows 8.
Recovery Manager - Windows 7
After the reinstallation has completed, restart the PC.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Getting error message "cannot prepare project for publishing (-50) -- and it wont publish my project. What's up?!

getting error message "cannot prepare project for publishing (-50)" and, subsequently, it won't publish the bloody thing. I have publsihed many videos previous to this one so I have no idea waht is going on.
So, my question is -- WHAT IS GOING ON?!!

Hi
See if this might help
Error -50
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Yours Bengt W

HT4623 I keep getting an error message "cannot connect to the internet." Is this a problem with my internet provider, or has anyone else had this problem.

I keep getting an error message "cannot connect to the internet." Is this a problem with my internet provider, or has anyone else had this problem.

I get that problem once in a while and I will not be able to connect to the Internet with any of the 5 or 6 (or 7 or 8 ) web browsers that I use on my iPad. The one thing that I do that has never failed to work for me is to close all apps on my iPad and reset the device. I can't guarantee that it will work for you, but this works for me every time I get the server failed to load/can't connect to the Internet message.... Or whatever the exact message is.
If you have a ton of apps in the multitasking display, it can take a while to close them all, so you could just trey resetting the iPad first and that might be all that you need to do.
Closing apps in iOS 7 works like this. Drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

NOKIA E71 "malbox' in use error message cannot sen...

Similar Messages

Maybe you are looking for