Nokia E71, No boot after Up-date

I have updated my Nokia E71 and right after I realized my phone was actually switched off eventhough the software update was successful (I had the screen on my PC so I guess it went to the end).
And since, the phone doesn't want to turn on (when I turn it on, there is the background light for 1 or 2 minutes and then it went back to dark again, no sound, no animation).
I recharge the battery and tried many things but nothing work. 
What could I do?
Thanks,

Hi avign
As "psychomania" so rightly says, I can confirm that on E71 you depress the (Y/3), (U/*) and Green (call) buttons all at the same time then power on.
You will find this procedure detailed in Paragraph 45 of FAQ to Nokia Software Updater here:http://europe.nokia.com/A4577229#faq45
If it is of any consolation to you my E71 "died" when updating firmware to v210.21.006 a few days ago and the above rescued the situation and allowed it to complete. 
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

  • Recovery won't boot after transfering data to new bigger HDD (WIN 8 laptop)

    Hello I just bought a new HP laptop with Windows 8 preinstalled. It has 500 gb HDD and since I also have a 1TB hdd i wanted to swap them. I created Image of the disk and then recovered it on the bigger HDD (using Acronis 13). Everything worked fine, but the F11 recovery doesn't work. It says
    Recovery
    Your PC needs to be repaired
    A required device isn't connected or can't be accessed.
    Error code: 0xc0000225
    [ A text saying I should use recovery tools on my installation media to fix the issue. ]
    Press Enter to try again
    Press F8 for Start-up Settings
    Press Esc for UEFI Firmware Settings
    I then also tried Paragon Free version but with the same result. When i'm in windows it allows me to start the recovery but after restart it just boots windows again. Any ideas?

    Hi,
    You can help us help you by posting the following information.
    1.  The full Model No. and Product No. of the notebook - see This HP web document if you don't know how to locate the model number and\or product number.
    Had you considered using the recovery media (USB or recovery disk set) to do a factory image recovery to the new larger hard disk instead of using the image?  
    The new installation created by factory image recovery should allow the use of F11 from power on.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Nokia e71, i lost my packet data access point. how...

    back when i didnt have a data plan, i deleted the packet data access points, but now that ive upgraded i cannot seem to find those points back. can anyone help me out?

    I guess you can call up your service provider customer service and ask them to re-send the settings!

  • How to make CSD call in NOKIA E71

    Hello,
    I bought two Nokia E71 mobiles with BSNL 3G connection. My service provider(BSNL) providing 3G service. E71 is connected to PC there i dialed to another phone which is conneted to other PC. when i dialed from hyperterminal in winxp by using ATD commnad with out semicolon. I am getting connection error messge on my phone. NO CARRIER on hyper terminal.
    I don't know what the problem is i tried with all commands no use. Is there any setting required for NOKIA E71. How to make data call (CSD call) by using Nokia E71.
    You help is very much appreciated..
    -Vijender

    Hi
    this may or may not be of help.
    I was having a similar problem with a 6230i.
    When trying to make a data call  the No Carrier signal would come back.
    After some research I changed +cbst form 0,0,1 to 7,0,1
    at+cbst=7
    This apparently gives the receiving modem more time to connect. It sends the no carrier signal 30 seconds later after appearing to connect, I still dont get the connect 9600 response.

  • Nokia E71: Messaging Button and Name and Date Form...

    Two questions:
    1. When in stand-by mode and I click on the Messaging button, it always directs me to my e-mail. I would like to set it as such that it will go to my Inbox, instead.
    2. Is there a name separator I can use? On my inbox, the name format is "Last Name First Name". Is there a way I can change it to "Last Name, First Name" or much better would be "First Name Last Name"?
    3. Lastly, I prefer my dates with the months spelled out, like "15 Nov 2008" instead of "15.11.08" It works for older Nokia models, like my brother's phone. Where can I set this for my new E71?

    1: Menu -> Tools -> Settings -> General -> Personalisation -> One-touch Keys and change it from there. there are different options for short presses and long presses.
    2: I think you need to get your contacts organised which in turn will organise your inbox! Go to your contacts -> Options -> Settings -> Name Display....
    3: Can't help you with number 3 since they dont seem to have the ability to have the name of the month displayed, just the number of it. Maybe someone else knows how its done. Good luck to you.
    Nokia E71-1 (254.03)
    110.07.127
    RM-346

  • Nokia E71, date keeps changing

    My date on the Nokia E71 keeps changing. It tends to jump a few days. For example, today (5th March) it has jumped to 7th March. I have the network time on and off, so I don't think it is that.
    http://www.sassco.co.uk/ Soccer and basketball events in the UK and Europe.
    http://www.sasscodesign.co.uk / Freelance website design service

     this could be caused by some 3th party app
    go for software update.
    http://europe.nokia.com/get-support-and-software/download-software/device-software-update 
    be sure you have read   FAQ before starting the proces
    If you need my help or I late with an answer you need, send me a private message
    P.S.
    Please before doing that, be sure you have already searched the topict on this site about the issue you have. Read Help sections before asking. Describe yor issue step by step with complete details.

  • Nokia E71 time and date problems.

    I cant ever set the time and date of my nokia E71. Anytime i access the time and date settings, it just doesn't go through. Please help me out.

    Hi Faces1, 
    Welcome to Nokia discussions board! 
    In order to fix this issue, I advise you to perform a soft reset on your phone: type *#7780#. Default lock code is 12345. If the issue persists, perform a hard reset. First of all, back up your data using Nokia Suite (Tools > Back up). Once your data is fully backed up,  type *#7370# on the keypad. 
    Alternatively, you may also check for updates on Nokia Suite (by going to Tools > Updates).
    Then try to set the time and date again. 
    Let us know how you get on and feel free to post any other questions you may have. 
    Regards, 
    astra2025
    Press the 'Accept Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

  • Mac pro OS X 10.6 Snow Leopard won't boot after software up-date

    I am new to Apple/Mac products. I recently bought an iPad and liked it so much mt epiphany was that this must be why Mac users are so loyal to Apple products. So I bought a used Mac Pro on EBAY, received the unit in good condition, set it up and booted. after I got it online I discovered it was due for a software update. No problem. I followed the software update icon, downloaded 4 updates and began the 2 hour download. When the download completed I clicked to install and left the room. when I returned the screen was blank. I grabbed the mouse in an attempt to "wake it up". The fans kicked on and it sounded like a jet taking off bot the screen remained blank. It has not booted since. Any ideas on how to recover?

    Me: bought off ebay? then take the DVD OEM discs and clean system install.
    Upper right  corner "About this Mac..." More.... takes you to System Profiler.
    Top lines of what model etc. do not include serial number but you might want to call and / or check that too and order replacement DVDs if it didn't have those.
    but for now, Wipe the drive.
    You can backup first if you want.
    Utility folder: Disk Utility: Restore: allow drag and drop the source and target.
    www.macupdate.com "backup programs" I recommend Carbon Copy Cloner to maintain bootable backups and can also archive changes. Similar to what Paragon Manager Suite offers in Clone OS to SSD.
    Boot from the OS X DVD it should have come with. Choose the Utilities from menu bar : Disk Utility to repair or format. Then go back and Install OS X.
    Using Cloning as a Backup Strategy
    http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
    http://www.bombich.com/software/updates/ccc-3.5.htmlOS X Lion Install to Different DriveHow to create an OS X Lion installation disc MacFixItMigration Assistant Update for Mac OS X Snow Leopard
    http://www.apple.com/support/lion/installrecovery/ Create an OS X Lion Install dischttp://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
    How to clone your system:http://macperformanceguide.com/Mac-HowToClone-backup.htmlhttp://macperformanceguide.com/Mac-HowToClone.htmlhttp://www.macupdate.com/app/mac/7032/carbon-copy-clonerhttp://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html
    Mac OS X Help
    Isolating Issues in Mac OShttp://support.apple.com/kb/TS1388
    https://www.apple.com/support/osx/https://www.apple.com/support/quickassist/http://www.apple.com/support/mac101/help/http://www.apple.com/support/mac101/tour/
    Get Help with your Product
    http://docs.info.apple.com/article.html?artnum=304725
    TimeMachine 101 https://support.apple.com/kb/HT1427 
    Mac OS X & Mountain Lion Communityhttps://discussions.apple.com/community/mac_oshttps://discussions.apple.com/community/mac_os/os_x_mountain_lion?view=discussio ns
    Recovery Modehttp://support.apple.com/kb/HT4718
    reset SMC For "Mac wont' turn on or boot" and relatedhttps://support.apple.com/kb/TS1367
    General purpose Mac troubleshooting guide: Isolating issues in Mac OS XCreating a temporary user to isolate user-specific problems: Isolating an issue by using another user accountIdentifying resource hogs and other tips: Using Activity Monitor to read System Memory and determine how much RAM is being usedStarting the computer in "safe mode": Mac OS X: What is Safe Boot, Safe Mode?To identify potential hardware problems: Apple Hardware TestGeneral Mac maintenance: Tips to keep your Mac in top form
    First, if at all possible make a backup of the drive in its present configuration.  If something goes wrong during repair attempts and makes things worse you will have a backup.  You will have to decide how to work this in the light of any present backups you may have, for example, a backup that may be a few days out of date.  In that case you may want to keep that one and make a second backup of this as they are now, though I realize people often don't have a lot of empty drives sitting around.
    Boot from the System Installer disc that came with your computer or is the one for the version you currently have on there, select language if applicable, choose utilities, run Disk Utility and verify (and repair if necessary) the drive. You can verify a drive from DU on your main drive while booted but I have found this can result in incorrect reporting of errors. To repair your drive you have to run it from a drive other than the boot drive anyway. Next, boot from your drive in Safe Mode (http://docs.info.apple.com/article.html?artnum=107393) and repair permissions.  You can repair permissions while booted from the installer disc but this uses the permissions configuration on the installer disc which may be out of date if you have run any updates on your computer.  Booting your computer to Safe Mode restricts the number of things running on your computer while permissions are being run and does a bit of spring cleaning at the same time.
    Reading
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck - http://docs.info.apple.com/article.html?artnum=106214Using Disk Utility in Mac OS X 10.4.3 or later - http://docs.info.apple.com/article.html?artnum=302672Disk Utility's Repair Disk Permissions 10.0-10.6 - http://docs.info.apple.com/article.html?artnum=25751"Try Disk Utility" (modified from http://support.apple.com/kb/TS1417)
    1. Insert the Mac OS X Install disc that came with your computer (Edit: Do not use this disc if it is not the same general version as what you have currently on your computer, e.g. use a Tiger disc for a Tiger drive, not a Panther disc), then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk."

  • My wife has an NOKIA E71 and she syncs with iSync. Everything works well, but when she adds a meeting on her phone, it does appear on the computer after syncing. Anyone? We have an iMac 24" with the latest MAC OS.

    My wife has an NOKIA E71 and she syncs with iSync. Everything works well, but when she adds a meeting on her phone, it does appear on the computer after syncing. Anyone? 
    We have an iMac 24" with the latest MAC OS.

    Hello Kerrigaj,
    After a re-install of OS X 10.5.8 uninstalled the E71 in iSync and moved it out of the bluetooth-device list first and completely re-installed it using the bluetooth manager (SystemPreferences/Hardware).
    No extra thirdparty-software involved and ever since no problems.
    Goodluck - hope it works for you.
    (MDD 1Ghz DP/2Ghz/OS X 10.5.8 + E71)
    Message Edited by nicle on 28-Aug-2009 07:23 PM
    Message Edited by nicle on 28-Aug-2009 07:24 PM

  • Nokia E71 - after software update from PC suit - p...

    Nokia E71 - after software update from PC suit - problem started for GPRS connection showing "no network connection'
    I am using vodafone service, also saved setting many times but it didnt work.
    How to solve the problem? also wanted to know hard reset or 3 finger reset process and steps.

    Menu » Tools » Settings » Connection » Access points » Options » New access point 
    For the reset, does this help? Because Vodafone operates in different countries with different settings, in which country do you live?

  • Nokia e71 New messages not showing in inbox

    I recently updated my nokia e71 with the new software from pc suite, everything went fine but i recieved around 3 messages just after I had restored all my data onto it, I went into the inbox to read them but its showing no new messages. On the message menu my Inbox logo has a read star indicating it has new messages but they are not showing up, its also saying I have 4 unread messages when I synchronise my phone to my pc yet I cant read them via the pc. Help please!!
    (Ive reset, restored to factory settings & rung nokia support with no help)
    Message Edited by beckuhgreaves on 19-Jan-2010 04:21 PM

    If you have a memory card, check to see if the phone is still storing messages in the same place. Example, if the phone is currently set to store messages on the phone memory, switch it to the memory card and see if the messages then show up.
    If I have helped you with your problem in some way, please take a little time and hit the kudos button in my post. Without your feedback, I don't know if I am being helpful or should just be put out to pasture.

  • E71 wlan issue after firware upgrade

    I just upgraded by E71 to the latest software version. The upgrade went without any issues. After the upgrade I realised that t had removed all my contacts - so I had to restore my backup(I restored the SETTINGS as well). I was using a app for my 'WiFi' (for prioritizing my access points) and after the firmware upgrade - I could not see this app at all. The following are my issues now:
    1. I cannot connect to my home wifi(WEP) - it was fine before the upgrade. The first time it says - 'Connection not available' and every subsequent time it irritates by showing 'WLAN already active. Please close the connection and retry'.
    2. I have tried to restore the factory settings and it still does not work.
    3. I have renamed my Access point to the ones that the app was using - still no luck.
    So, what are my options now? Can somebody please help? I never thought a small software upgrade could spoil my whole evening!

    Hello,
    I have just had EXACTLY the same problem.
    I have a Nokia E71 and it was working OK before the upgrade. I just used the latest Nokia Updater and latest nokia pc suite to upgrade to 500.21.009.
    The upgrade performed perfectly, and after the upgrade I restored my backed up data.
    I have the exact symtpoms as psankar. I have factory reset the phone and tried again. Same problem.
    Connection not available, and then connection already active. Small Wireless icon appears at top right of screen, and stays there, but there is no active connection in connection manager.
    The only way to remove the wifi icon and to get the phone to attempt to reconnect is to power off the phone, but then on reconnectig then you get connection not available and then the whole cycle begins again.
    Help appreciated
    TIA
    Alex

  • Nokia E71 Menu View Totally Changed. How to revert...

    The menu view of my nokia e71 has changed radically. the installations,connectivity,media,tools etc all the folders have disappeared and all their contents (buetooth,infrared,gps,realplayer,recorder etc) are cluttering up the menu. i want all the folders back with their contents in them. what should i do to get back the normal menu view?
    Solved!
    Go to Solution.

    try the following
    2.*#7370# - Reformat your phone (out of the box, tho keep in mind that most newer nokia phones at least n series, e series and s60 based phones have udp - user data preservation so not ALL data may be lost. still it is a good idea to always do a back up of your stuff.)3. This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
    3. hard reset - hold the following buttons * (star key), 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Nokia E71 Shuts down automatically, even when full...

    My new nokia E71 keeps shutting down even if its fully charged, tried just about everything, also will not except an update, haved tried many times to update, fails at last minute 1%. Has nokia got a glitch in their system. The phone fails to turn on about 40% of the time, then I push the button an hour or 2 later and it works , then a few hours later it turns off again, same problem time after time. what is the problem and ho do I fix it. I have the phone on contract with 3Italia, but I'm going to Dublin Ireland for 5 months, will nokia Ireland fix it under guarantee if I can fix it here.

    Howdy asem18,
    This article provides troubleshooting tips that can help you resolve the issue with your iPhone 4 restarting unexpectedly upon start up.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    If your device gets stuck during startup
    When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
    Make sure that you have iTunes 12 or later on your computer.
    Put your device in recovery mode.
    When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
    Get more help
    If you still need help after trying the steps above, contact Apple Support.
    So long,
    -Jason

  • To Do Entries in Nokia E71

    my phone is nokia e71
    Whenever i try to save something in the TO DO list
    the phone is showing SYSTEM ERROR.
    Other calendar functions are okay?
    What may be the reason?
    please help.

    what is the firmware onthe device?
    also try out *#7370# after taking a backup of required data, which might help out
    If this post helped... Add some kudos!!

Maybe you are looking for