Nokia E71, PC suite will not recognize
hi, i have recently bought a Nokia E71 and i am trying to put some of my files on to my phone from my computer.
i am connecting my phone with cable connection,
PC suite version 7.1.40.1
cable driver 7.1.22.0
when i click the button "connect a phone" and its asking me to connect the cable, i did connect it,but it does not recognize it
and an error message pops up after about 5 mins
please help =/
also, is there any other way to put files on to my phone through the computer other than PC suite?
-jenny.
Hi Jenso,
If you have memory card on your phone, connect your device in Mass memory/data transfer mode, you can copy paste your files from pc to the phone. In Mass memory/data transfer mode, your phone will act as a memory stick(Pen drive, USB storage medium), so once done, make sure that you remove the phone by selecting remove hardware safely option, as just disconnecting the phone will result in data lost and its not recommended to unplug your phone without stoping it from remove hardware safely option.
Hope it helps. If i get time, i will check E71 connectivity with Nokia PC Suite.
Similar Messages
-
Ovi Suite will not recognize N97
I got a N97 last weekend and keep getting the message that Ovi Suite cannot recognize my device. I have spent many hours on the phone with Nokia but uninstalling and reinstalling Ovi Suite is not solving the problem. The USB cable works. I have used it to just copy files from my PC to my N97. I have tried with the security/virus programs on my PC turned off. I have used the Nokia PC Suite cleaner. My OS is XP service pack 3. I am getting really frustrated and am ready to just return the phone and look for a different manufacturer. I read a lot of good reviews about Nokia and heard good comments from people but this is too much. Does anyone have any suggestions? I would really appreciate some help.
This is more likely to be a computer problem/software problem than a problem with your phone. I run W7 and have no problem connecting my N97 to the pc using either mass storage mode or pc suite mode.
You know you have to set your phone in PC suite mode to connect to ovi suite/pc suite? Having both Ovi suite and pc suite on the same computer could be the problem. You should stick with one of them.
Try also to set your phone to automaticly connect in pc suite mode: Menu->settings-> connectivity->usb->Usb connection mode: PC suite.
Then: ASk on connection-> NO.
Try also different usb ports on the computer. You could also open devicemanager on your pc and scan for new devices whilst the phone is connected to it. -
Ovi Suite will not recognize E72
Dear All,
I have recently installed ovi suite. My computer keeps asking me to install the driver for the "bluetooth peripheral" device (and it can't find the program to install). But that is not the real problem. problem is when i connect my phone to the pc it doesn't recognize it, i've gone through all the help files and done everything, checked the connection was right, disconnected, rebooted both devices and reconnected, and made sure it was on use as Ovi Suite when the option comes in the beginning.
Furthermore, although my computer sees the phone as a Bluetooth device and i can browse and copy files to and fro the phone, the pc suite doesn't recognize the phone via the bluetooth route either.again, i've gone through all the help suggestions.
What could possibly be the problem?
Attachments:
OVI SUITE DISCUSSION SCREENSHOT.jpg 123 KBI also encountered this issue recently..
The methods mentioned above may probably work, but what finally got mine to work (PC Suite and Ovi Suite not recognizing connection type, even when WinXP already recognizes the device and can use the Nokia Phone Browser to browse the cellphone's folders) was the following:
I've posted it in more detail here:
/t5/Connectivity/Can-t-connect-N97-to-PC-via-USB-cable/m-p/716873#M31885
Seems to me that there might be some bug with the Nokia Connecitivity Cable Driver and/or PC Connecitivity Solution which caused the cellphones to not be recognized by PC Suite/Ovi Suite sometimes (it worked the other day, but suddenly doesn't recognize today).
Re-posting the steps I tried and got it to work:
Summary:
0) (the phone/USB cable must not be connected to the PC during this time):
1) Uninstall Nokia Connectivity Cable Driver
2) Uninstall PC Connectivity Solution
3) (reboot if necessary)
4) Install Nokia Connectivity Cable Driver (Nokia_Connectivity_Cable_Driver.MSI)
5) Install PC Connectivity Solution (PCCS.MSI)
6) Now connect your cellphone; wait for the cellphone to be installed properly in Device Manager (may take a while since it installs several devices like "Nokia E72 USB Phone Parent, Nokia E72 USB OBEX, Nokia E72 USB modem, etc). It installed around 8 devices on the E72. Similar for E63.
7) Try running Nokia PC Suite: Connect a phone. It should be able to recognize the "USB cable type of connection" and identify the phone's model.
8) Try running Ovi Suite, which should also identify the USB connection type and the cellphone model.
If you've previously installed Nokia PC Suite (or maybe Ovi Suite?), there seem to be a backup copy of the required installer files residing in C:\Documents and Settings\All Users\Application Data\Installations\{<CLSID-a long string of numbers>}\Packages\CCD\Setup\Nokia_Connectivity_Cable_Driver.MSI and C:\Documents and Settings\All Users\Application Data\Installations\{<CLSID-a long string of numbers>}\Packages\PCCS\Setup\PCCS.MSI .
Hoping this might work for you too.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~
Appreciate clicking the green "Kudos" star button if this message has been helpful for you. -
Ovi Suite/PC Suite does not recognize the connecte...
Error message: "Ovi Suite/PC Suite does not recognize the connected phone.Ovi Suite/Pc Suite cannot read the required information from the phone.Check that the connected phone is supported by Ovi Suite/PC Suite".
You can try this which can solve your problem.
1. Disconnect your phone from PC if connected.
2 .Open Control Panel and go to ‘Programs and Features’
3. From the list of available programs, choose ‘Nokia Connectivity Cable Driver’
4. Click on the ‘Change’ button on top toolbar.
5. In the setup dialog box that pops up next, choose ‘Repair’ and select ok. Wait for setup to complete.
6. Restart the computer if prompted.
7. Now connect your phone to the PC. Driver installation should complete and PC/Ovi suite (hopefully) should detect your mobile properly now.
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You@ Omarbooyaka,
Welcome to the forum! You should use Nokia Suite to update your device to Belle. If still the same, please go to control panel > printer and devices > right click the phone icon > remove the device. Then try to connet again. Also try all the steps provided by magovoru. Could you also report the issue here if connection still does not work.
Hope this helps!
Jampe
If the answer solves your issue, please click the ACCEPT AS SOLUTION button so other users can benefit from it as well. Giving a kudos (the white star) if my answer has helped will be appreciated. -
Windows Security Suite does not recognize Verizon Internet Security Suite
Windows Secuity Suite does not recognize that the Verizon Internet Security suite on one of my PC's is running and keeps popping up aWindows Security Alert. The Firewall is enabled within Verizon Internet Security suite.
My other PC's don't have this issue.
All PC's are running Windows Vista Home Premium.
Any ideas?
Cheers,
Markwell that error message is saying that Windows security center no longer supports the way that the VISS is reporting. Which means that even though VISS is working and it is even reporting its status to WSC. WSC doesnt recognize it anymore. Likely one of the windows updates made the change. I can see the fight comming now. Verizon is going to say. Its working and if the other program doesnt support it, too bad. And windows is going to say the same thing in reverse. My guess would be that it will probably stay that way unless Verizon or Microsoft get enough complaints to make a change in the recognition system.
But the good news is that VISS is running and protecting you. The WSC just doesnt "speak the same language" anymore and cant understand the message from VISS saying "I'm up and running"
====================================================================================
Error exists between keyboard and chair. -
IMAC DVD Player does not recognizing dvd movie . I have an IMAC (10.7.4) using DVDPlayer (vers. 5500.26.11) and it will not recognize/play a dvd movie...it thinks it is a blank dvd. The IMAC will play rented dvd movies. The dvd movie plays fine on my Mac Book Pro (10.6.8) on the Pro's DVDPlayer (vers.5.4) abd in my external Sony DVD Player The dvd move was made/burned on a PC. Why will a dvd movie play on my Macbook Pro and not my IMAC?
Hello:
This is not an area I have much experience in......I rarely insert DVDs and I have never had a similar problem.
When the DVD is in the drive (and DVD players is open) click on File>get disk info.
Barry -
TS1363 my computer will not recognize my iphone
My iphone has been working fine with my computer. After I did an update for itunes today, the phone froze up and will not work at all. It has a picture stating to connect it to itunes, which it is. The itunes will not recognize the iphone now. help!
Phone not recognised in itunes
device not recognised by iTunes on PC or device not recognised by iTunes on Mac
Some of those things which concern itunes also help with your problem. In particular try rebooting the computer, try a different USB cable to attach the phone or try a different port -
It got A new router today and wanted to turn on apple tv but my remote app on iPad and iPhone will not recognize apple tv. Btw- I do not have apple tv remote.
It reboots it but unplugging can also rectify communication issues like this. A restore would be the next step.
-
Solution center will not recognize J4680 in wifi
My J4680 will print a document in wifi so I know my computer and printer are communicating. I have reinstalled the software and I am still able to print. However, when I open HP Solution center to check ink level or scan an item it will not recognize the wifi printer. It will recognize it as if I have the USB connected. This defeats the purpose of having wifi options if I cannot communicate with the printer except to print. I cannot even run diagnositics like cleaning printer heads etc because HP Solution center will not communicate via wifi. Solutions?
That link is not working for me at the moment either @judomax , perhaps if you wait it out for a few hours or a day it will be back up and running. It is possible there are changes being made to the page. It would be nice it if said "under construction" or something of that sort, but in the meantime I guess we sit and wait.
I will keep you posted if the link is no longer valid and the Print and Scan Doctor link changes. I will keep an eye on it.
Thanks for letting me know.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
I am trying to hook my MacBook Pro to a Sony Bravia TV via DVI to HDMI cable and the TV will not recognize the signal. I have used the same setup with three other TV's, each a different brand with no problem. Any ideas?
Is the TV set to take input from the HDMI connection?
On your computer, if you open the Displays preferences and do not see an Arrangement tab (or there is an Arrangement tab that shows only a single monitor) then there is something physically wrong with your connection. Try clicking Detect Displays just to see if the computer can now sense the presence of the connection. Check your connections.
If you do have an Arrangement tab, and it shows two screens, then click Gather Windows to bring the TV's Displays preferences on to your main screen if the TV is not yet showing an image. Set the proper resolution (probably 720p, 1080i, or 1080p). Set the refresh rate (probably 60Hz) if that preference is shown. You should see a picture at this point. I recommend turning off mirrored displays if it is enabled. -
Just downloaded 7.2 into my Iphone 5 what a mess. Dropped called no audible notifications for email or text messages. Went to the apple store and reset phone to original specs. Now trying to restore apps and music and itunes will not recognize the phone. I have gone thur the steps for windows 7 and still nothing??? I have downloaded the newest version I itunes too.
Hi Midwestboy,
If your iPhone isn't being recognized by iTunes on your Windows machine, you may find the following article helpful:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Regards,
- Brenden -
I have a Sony radio in my car. With IOS 4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio. After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone . Any thoughts.
I am reading on this site about the error I am getting and it wants me to change some files that I am not comfortable messing with. Mainly because it is like a foreign language. Will the store do this for me or tell me if it is neccessary?
-
how can I transfer photos from my comp to my ipad2.I have the connection kit and can transfer photos that are direct from camera BUT if I transfer photos from comp to card it will not recognize them ????
To sync photos from a Mac or Windows PC to your device using photo applications
Make sure you have the latest version of iTunes installed.
In iTunes, select your device's icon in the Devices list on the left.
Click the Photos tab.
Choose "Sync photos from."
On a Mac, choose iPhoto or Aperture from the pop-up menu.
On a Windows PC, choose Photoshop Album or Photoshop Elements from the pop-up menu.
Note: Some versions of Photoshop Album and Photoshop Elements don't support collections. You can still use them to sync all your photos.
If you want to sync all your photos, enable the option for "All photos, albums, events, and faces." If you want to sync photos from only some albums, events, or faces, enable the option for "Selected albums, events, and faces" and then select the albums you want. If syncing on a Mac with iPhoto version 6.0.6 or later, you may enable the option to "Include videos" to sync videos directly from iPhoto to your device. (Requires iOS 3.0 or later).
Click Apply.
To sync photos from a folder on your hard disk to your device
Drag the images you want into a folder on your computer. If you want images to appear in separate photo albums on your device, create folders inside the main folder and drag images into the new folders.
In iTunes, select the device icon in the Devices list on the left.
Choose "Sync photos from."
Select Choose Folder from the pop-up menu and choose your main image folder.
Click Apply. -
How do I sync my iPhone 5 to my new PC? iTunes will not recognize it even when plugged in the USB port. Settings>General>iTunes wifi sync is still my old laptop. Any help is appreciated.
See also Recover your iTunes library from your iPod or iOS device.
tt2 -
Hi, I have a new cell phone, I wanted to give my iphone to my father, instead of deleting the content on the iphone I have deleted the entire iphone. It starts up no more. iTunes will not recognize the iphone. How do I get my old data back onto the phone?
Place the device in DFU mode (google it) and restore as new.
Maybe you are looking for
-
Can there be buttons/links on or in flash object?
Hi, I have no idea how to ask this question properly. I am only designing this, not making it, so simple answers for me would be good, but also technical answers that I can pass on to the flash person. On my home page, I am going to have 3 images tha
-
Hi Gurus How can get the deleting list for sale order? Useful answer duly rewarded back. Regards, Devendra
-
REF CURSOR problem .. function call from select
Hello, I am still on the search for a way to call a function from with in a select statement. I've done it in SQL*Plus like this and it works. SELECT name, f_format(name) FROM user WHERE id = 12; This returns first the unformatted (raw) version of th
-
With the standard patching process(installcluster), it takes a looong time since each zone needs veridated. Any option that I can apply the patchset to the global zone only, then later upgrade the non-global zones? If possible, I'd like to use LU.
-
Hi Experts, I am not able to see the standard ALV toolbar to download the output to an Excel or local file..etc. I placed my ALV container on a screen below some I/O text boxes in display mode only. I also need to download the I/O text boxes. Can som