Nokia E71x browser no longer loading content corre...

I have had my Nokia E71x since September and until now everything has worked fine. A couple of days ago when I tried to use the browser, it started loading the content differently. So now when I goto my AT&T Media Net homepage, the page is off centered and no longer loads pages with lots of content correctly. Other webpages like google will load fine.
I took the phone into an AT&T device service facility and tried to master reset the phone. That did not work. Then we exchanged the phone for a different one and that did not work. We switched SIM cards and everything but could not figure out what was going on. We tried multiple phones and the same problem came up with each different phone.
Is anyone else out there having this problem with their Nokia E71x on AT&T?
Anyone have a solution to the problem?

Try clearing cookies and cache:
[[How to clear the cache]]
[[Deleting cookies]]
Otherwise use firefox in [[Safe Mode]];
Also try [[Troubleshooting extensions and themes]]

Similar Messages

Finder (Snow Leopard 10.6.8) taking long time to load contents of any directory. Please help?

In my macbook pro 5,2 snow leopard (10.6.8), Finder taking long time to load contents of any directory. Please help?
I have already tried to spotlight re-indexing but it did not help. I am hardly able to work on it, almost for each directory I browse its keeps on spinning for 1min.

Download iTunes from Apple's web site and install it. Don't use Software Update.

Firefox no longer loads home page or deletes cookies. I have repeatedly checked both settings and they are correct. It always goes to the last page I was on when I closed the browser ..

Firefox no longer loads home page or deletes cookies. I have repeatedly checked both settings and they are correct. It always goes to the last page I was on when I closed the browser .

Go to '''TOOLS''' then''' OPTIONS''' then in '''GENERAL''' panel in '''STARTUP '''session choose '''Show my home page''', then click '''OK''' to save it, exit firefox and restart-it.
see for more info: [https://support.mozilla.org/en-US/kb/Options%20window%20-%20General%20panel Options window - General panel]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Safari will no longer load any images in the browser. What could be the problem?

In the last couple of months safari will no longer load any type of image in the browser. All the text loads fine and the layout is correct but everywhere there should be a picture of any sort is blank. what can I do to fix this?

- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

BB10 Internet Browser - loading content window

Hello,
I am new at using BB10 and have an issue with the Internet browser.
After I open a web site that has a lot o contents ( usually is Jalopnik site) I get interupted by a player that lasts around 2 seconds that loads a black page with writting on it "Loading content". This is annoing because if I have the music player opened it will pause it.
Is there an option to turn this thing off?
Thank you!
Vlad

Depends on what it is driven by, you might like to try turning off flash in the settings.
If you've been helped click on , if you've been saved buy the app.
Developer of stokLocker, Sympatico and Super Sentences.

Safari (and other browsers) very slow loading "content rich" web pages

Hi,
I'm a very "light" user of my mac, using it basically for surfing the web, uploading pictures and music, etc... and recently any web page that has a lot of content (examples are nfl.com, nba.com, nhl.com, mlb.com, united.com, continental.com) takes a very long time to load (most other web pages load normally). Safari (and Firefox as well) gets to the web page in an instant, but then sits there trying to load content (mostly high res pictures and ads I suppose), which sometimes takes minutes or just never fully downloads the content. I'm connected to the internet via ethernet (high speed cable modem from Time Warner), and they've already come out and verified that everything on their end is fine. I've followed the instructions posted on some of the other similar posts (emptying cache, deleting cookies, disenabling add on's, reseting safari, logging in as another user, etc..), and this has not helped. Since this problem is persistent with both browsers, I'm wondering if this may be an OS issue as opposed to a browser issue. If someone can walk me through a solution (keep in mind that I'm a novice), that would be much appreciated.
Thanks!
Message was edited by: Mr. Cady

HI and welcome....
Since this problem is persistent with both browsers, I'm wondering if this may be an OS issue as opposed to a browser issue
Could be.
Since the problems exist with multiple browsers, login to another user account on your Mac. Try Safari there. If you see the same behavior with Safari there, then follow the instructions here. You will need your install disc. The startup disk may need repairing. Even if Safari is ok in another account, it's still a good idea to check the startup disk. That way you can rule that out.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
(In Mac OS X 10.4 or later, you must select your language first from the installer menu)
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your startup disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. Make sure there is always 15% free space.
Carolyn

I get the "Fast Browser Plugin not loaded" message every time i run safari and I can't find an MTWB folder anywhere on my hard drive?

I get the "Fast Browser Plugin not loaded" message every time I run Safari and I can't find an MTWB folder anywhere on my hard drive? This doesn't seem to be causing a problem, but is a puzzle?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Reusing/storing Loaded Content in a Movie - Cache in Flash

Suppose you have a slideshow movie that loads content such as images or Flash movies itself and continually replaces content with new images or movies as a viewer browses through content. Is there a way to store images or movies that have been loaded so that if the same content is selected they do not have to downloaded again? Presumably once content has been unloaded or something has ben loaded into the same level the data is wiped from memory and has to be downloaded if it is displayed again. How could content be stored in Flash or does the content stored in the browser cache take care of this?

that happens by default (as long as the user has a browser cache enabled).

Empty Nokia Phone Browser when using PC Suite

I have recently installed Nokia PC Suite v6.86.9.3 for use with my Nokia N95 8GB. I have also updated the firmware on my phone to version 20.0.016 so I should have all the latest versions.
Everything installed ok and i opened PC Suite as normwal. I can see my received messages in the bottom left corner of the Nokia PC Suite main screen but when I click on the envelope icon to create or send message it opens My Computer and nothing happens. The same problem occurs when I click on File manager or Contacts.
I have noticed in My Computer that I now have the Nokia Phone Browser. If I open this I can click on the icons positioned to the left of the window to create a new contact, create a new text message or refresh the folder, however the folder itself is empty.
I have read in the help files that you should be able to browse contact information & text messages along with the phone memory and memory card, but I'm getting no where.
Can anyone help me with this?
Solved!
Go to Solution.

Hi,
Can anybody confirm if this is still the way to solve the problem with phone browser not showing everything?
I used to work with PC suite for Nseries and could easily access my messages and contacts through phone browser. I recently did a firmware upgrade (to version V 31.0.015) for my N95 8GB and installed Ovi suite (2.1.1.1.) and PC suite (7.1.55.0) since then I`ve had several problems among others with maps updater and map loader. For now I`ve solved the maps issue manually. I can make and restore back-ups etc. so it`s got me confused.
I tried on my XP (SP 3) pc in case of compatibility issue for Windows 7 64x but same problem, deleted connectivity cable, all ovi/nokia related stuff, reboot, then restart, pc did found new hardware, drivers added correctly but no messages or contacts in phone browser (the rest of the folders does appear!) and as soon I click on my phone in the tray pc suite shuts down but no way to remove hardware safely.
As my screen also seems to have trouble showing stability at startup since this upgrade, (it comes on, shows my personal picture on screen, takes some extra long seconds to get connected, rebuilds the screen completely, then disappears for half a minute and decides to pop back on again. But when I enter menu a long double line shows up on the right side screen -like opening a browser with a scroll downbar- then the bar disappears and the rest is working just fine! I actually never had any issues with my trusted and beloved phone before hence the long wait for firmware upgrade, if it wasn`t for the update to free maps.. (got a new N97 for a few days so I got excited about it )
The weirdest thing is I`ve already did some soft/hard resets-only with digits not with fingers-, also reinstalled the firmware update again so I`m a bit clueless to what to do next, so I want to try as suggested above but since that was posted 2 years ago...
Any new or better suggestions?
thanks!

Long Load Times on Graphic Intensive Games

I'm experiencing some absurdly long load times (1-3 hours) with many games (SPORE, Portal, X:3, etc...) that I believe may be related to how graphically intensive they are. Older games with lower graphics quality (WoW, Civ 4, etc...) load up fine.
When I load any newer game the icon appears in the tray and the computer does nothing else for at least an hour, whereupon the program loads and begins playing immediately--often without any further delays or issues.
I also use Boot Camp to run Windows Vista (Ultimate 32) and experience no delays when running SPORE on Windows.
Below are my specs:
Hardware:
Hardware Overview:
Model Name: iMac
Model Identifier: iMac5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.33 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: IM51.0090.B09
SMC Version: 1.9f4
Serial Number: QP7121Q** <Edited by Moderator>
Network:
Bluetooth:
Type: PPP (PPPSerial)
Hardware: Modem
BSD Device Name: Bluetooth-Modem
Has IP Assigned: No
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: Manual
Exclude Simple Hostnames: 0
FTP Passive Mode: Yes
Auto Discovery Enabled: No
Built-in Ethernet:
Type: Ethernet
Hardware: Ethernet
BSD Device Name: en0
Has IP Assigned: No
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
FTP Proxy Enabled: No
FTP Passive Mode: Yes
Gopher Proxy Enabled: No
HTTP Proxy Enabled: No
HTTPS Proxy Enabled: No
RTSP Proxy Enabled: No
SOCKS Proxy Enabled: No
Ethernet:
MAC Address: 00:17:f2:d4:e8:98
Media Options:
Media Subtype: Auto Select
Built-in FireWire:
Type: FireWire
Hardware: FireWire
BSD Device Name: fw0
Has IP Assigned: No
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: Manual
Exclude Simple Hostnames: 0
FTP Passive Mode: Yes
Auto Discovery Enabled: No
Ethernet:
MAC Address: 00:19:e3:ff:fe:81:ea:7a
Media Options: Full Duplex
Media Subtype: Auto Select
Software:
System Software Overview:
System Version: Mac OS X 10.5.3 (9D34)
Kernel Version: Darwin 9.3.0
Boot Volume: MacintoshHD
Boot Mode: Normal
Computer Name: emeldi
User Name: Mike (mike)
Time since boot: 1 day9:05
ATA:
ATA Bus:
MATSHITADVD-R UJ-85J:
Capacity: 423.4 MB
Model: MATSHITADVD-R UJ-85J
Revision: FCQ5
Serial Number:
Removable Media: Yes
Detachable Drive: No
BSD Name: disk1
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Low Power Polling: Yes
Mac OS 9 Drivers: No
Partition Map Type: Unknown
S.M.A.R.T. status: Not Supported
Volumes:
SPORE:
Capacity: 368.7 MB
Media Type: CD-ROM
Writable: No
File System: ISO Rockridge
BSD Name: disk1s0
Mount Point: /Volumes/SPORE
Volumes:
disk1s0:
Capacity: 368.7 MB
Media Type: CD-ROM
Writable: No
File System: ISO Rockridge
Audio (Built In):
Intel High Definition Audio:
Device ID: 0x83847680
Audio ID: 23
Available Devices:
Headphone:
Connection: Combo
Microphone:
Connection: Internal
Speaker:
Connection: Internal
Line In:
Connection: Combo
S/P-DIF Out:
Connection: Combo
S/P-DIF In:
Connection: Combo
Bluetooth:
Apple Bluetooth Software Version: 2.1.0f17
Hardware Settings:
emeldi:
Address: 00-17-f2-be-d3-95
Manufacturer: Cambridge Silicon Radio
Firmware Version: 3.1965 (3.1965)
Bluetooth Power: On
Discoverable: No
Requires Authentication: No
Services:
Bluetooth File Transfer:
Folder other devices can browse: ~/Public
Requires Authentication: Yes
State: Enabled
Bluetooth File Exchange:
Folder for accepted items: ~/Documents
Requires Authentication: No
When other items are accepted: Ask
When PIM items are accepted: Ask
When receiving items: Prompt for each file
State: Enabled
Devices (Paired, Favorites, etc):
JabraBT125:
Name: JabraBT125
Address: 00-1a-45-81-c4-f6
Type: Headset
Services: Headset, Hands-Free unit
Paired: Yes
Favorite: Yes
Connected: No
Manufacturer: Cambridge Silicon Radio ($3, $978)
Incoming Serial Ports:
Serial Port 1:
Name: Bluetooth-PDA-Sync
RFCOMM Channel: 3
Requires Authentication: No
Outgoing Serial Ports:
Serial Port 1:
Address:
Name: Bluetooth-Modem
RFCOMM Channel: 0
Requires Authentication: No
Diagnostics:
Power On Self-Test:
Last Run: 6/22/08 3:50 AM
Result: Passed
Disc Burning:
MATSHITA DVD-R UJ-85J:
Firmware Revision: FCQ5
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media:
Type: CD-ROM
Blank: No
Erasable: No
Overwritable: No
Appendable: No
FireWire:
FireWire Bus:
Maximum Speed: Up to 400 Mb/sec
Graphics/Displays:
ATI Radeon X1600:
Chipset Model: ATY,RadeonX1600
Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: ATI (0x1002)
Device ID: 0x71c5
Revision ID: 0x0000
ROM Revision: 113-xxxxxx-139
EFI Driver Version: 01.00.139
Displays:
iMac:
Display Type: LCD
Resolution: 1680 x 1050
Depth: 32-bit Color
Built-In: Yes
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Display Connector:
Status: No display connected
Memory:
BANK 0/DIMM0:
Size: 1 GB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0x2CFFFFFFFFFFFFFF
Part Number: 0x3136485446313238363448592D3636374433
Serial Number: 0xDB086DDD
BANK 1/DIMM1:
Size: 1 GB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0x2CFFFFFFFFFFFFFF
Part Number: 0x3136485446313238363448592D3636374433
Serial Number: 0xDB086DDC
Power:
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 15
Sleep On Power Button: Yes
Automatic Restart On Power Loss: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: No
Hardware Configuration:
UPS Installed: No
Printers:
Lexmark All In One:
Status: Idle
Print Server: Local
Driver Version: 1.1.3
Default: Yes
URI: usb://Lexmark/Lexmark%20All%20In%20One?location=1d120000
PPD: Lexmark All In One
PPD File Version: 1.0
PostScript Version: (3011.104) 0
Lexmark All In One-1:
Status: Idle
Print Server: Local
Driver Version: 1.1.3
Default: No
URI: usb://Lexmark/Lexmark%20All%20In%20One?location=3d120000
PPD: Lexmark All In One
PPD File Version: 1.0
PostScript Version: (3011.104) 0
Serial-ATA:
Intel ICH7-M AHCI:
Vendor: Intel
Product: ICH7-M AHCI
Speed: 1.5 Gigabit
Description: AHCI Version 1.10 Supported
WDC WD2500JS-40TGB0:
Capacity: 232.89 GB
Model: WDC WD2500JS-40TGB0
Revision: 20.06C04
Serial Number: WD-WCANY2508218
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Mac OS 9 Drivers: No
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
MacintoshHD:
Capacity: 232.57 GB
Available: 11.26 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
Volumes:
disk0s2:
Capacity: 232.57 GB
Available: 11.26 GB
Writable: Yes
File System: Journaled HFS+
USB:
USB High-Speed Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x27cc
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0xfd
Built-in iSight:
Version: 1.84
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Manufacturer: Micron
Product ID: 0x8501
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27c9
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x3d
USB Hub:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: OEM
Product ID: 0x0061
Vendor ID: 0x043d
Lexmark All-in-One:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Lexmark
Product ID: 0x0069
Vendor ID: 0x043d
All-in-One:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Lexmark
Product ID: 0x0060
Vendor ID: 0x043d
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27ca
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x5d
USB Multimedia Keyboard:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: ALCOR
Product ID: 0x9462
Serial Number: Au9462
Vendor ID: 0x058f
USB RECEIVER:
Version: 25.10
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0xc50e
Vendor ID: 0x046d
USB Multimedia Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: ALCOR
Product ID: 0x9410
Serial Number: Au9462
Vendor ID: 0x058f
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27c8
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x1d
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x27cb
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0x7d
Bluetooth USB Host Controller:
Version: 19.65
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Apple, Inc.
Product ID: 0x8206
Vendor ID: 0x05ac (Apple Computer, Inc.)
IR Receiver:
Version: 1.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Apple Computer, Inc.
Product ID: 0x8240
Vendor ID: 0x05ac (Apple Computer, Inc.)
AirPort Card:
AirPort Card Information:
Wireless Card Type: AirPort Extreme (0x14E4, 0x87)
Wireless Card Locale: USA
Wireless Card Firmware Version: Broadcom BCM43xx 1.0 (4.170.46.7)
Current Wireless Network: ACTIONTEC
Wireless Channel: 9
Firewall:
Firewall Settings:
Mode: Limit incoming connections to specific services and applications
Services:
File Sharing (AFP): Allow all connections
Printer Sharing: Allow all connections
Applications:
com.apple.iChat: Allow all connections
com.apple.ODSAgent: Allow all connections
com.aspyr.empireatwar: Block all connections
com.RealNetworks.RealPlayer: Allow all connections
Locations:
Automatic:
Active Location: Yes
Services:
Bluetooth:
Type: PPP
IPv4:
Configuration Method: PPP
IPv6:
Configuration Method: Automatic
Proxies:
Proxy Configuration Method: 2
Exclude Simple Hostnames: No
FTP Passive Mode: Yes
Auto Discovery Enabled: No
PPP:
ACSP Enabled: No
Display Terminal Window: No
Redial Count: 1
Redial Enabled: Yes
Redial Interval: 5
Use Terminal Script: No
Dial On Demand: No
Disconnect On Fast User Switch: Yes
Disconnect On Idle: Yes
Disconnect On Idle Time: 600
Disconnect On Logout: Yes
Disconnect On Sleep: Yes
Idle Reminder: No
Idle Reminder Time: 1800
IPCP Compression VJ: Yes
LCP Echo Enabled: No
LCP Echo Failure: 4
LCP Echo Interval: 10
Log File: /var/log/ppp.log
Verbose Logging: No
Built-in Ethernet:
Type: Ethernet
BSD Device Name: en0
Hardware (MAC) Address: 00:17:f2:d4:e8:98
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
FTP Proxy Enabled: No
FTP Passive Mode: Yes
Gopher Proxy Enabled: No
HTTP Proxy Enabled: No
HTTPS Proxy Enabled: No
RTSP Proxy Enabled: No
SOCKS Proxy Enabled: No
Built-in FireWire:
Type: FireWire
BSD Device Name: fw0
Hardware (MAC) Address: 00:19:e3:ff:fe:81:ea:7a
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
Exclude Simple Hostnames: No
FTP Passive Mode: Yes
Auto Discovery Enabled: No
AirPort:
Type: IEEE80211
BSD Device Name: en1
Hardware (MAC) Address: 00:19:e3:df:5e:9b
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Proxy Configuration Method: 2
Exclude Simple Hostnames: No
FTP Passive Mode: Yes
Auto Discovery Enabled: No
IEEE80211:
Allow Net Creation: Yes
Disconnect On Logout: No
InterferenceRobustness: 0
Join Mode: Automatic
JoinModeFallback: Prompt
MAC Address: 00:19:e3:df:5e:9b
PowerEnabled: 1
PreferredNetworks:
SecurityType: Open
SSID_STR: ACTIONTEC
Unique Network ID: F0FA7942-54E7-409B-A1CA-10B05F3B2EDE
SecurityType: WPA2 Personal
SSID_STR: D Pad
Unique Network ID: A391D57D-A4EC-4B2E-B741-0D6569BD77AB
Unique Password ID: 404D3742-17AA-4C24-A229-7E37725522EA
SecurityType: Open
SSID_STR: linksys
Unique Network ID: FD2A5229-348A-4E90-B4E2-48E4DE62C394
SecurityType: Open
SSID_STR: M and M
Unique Network ID: D980D42A-E76C-4A68-920D-AAC9537C26C9
SecurityType: Open
SSID_STR: default
Unique Network ID: 5A2D9117-3263-46B9-952D-A4463BA5F377
SecurityType: Open
SSID_STR: Sweet Lou's **** Shack
Unique Network ID: FA247542-1EF4-41B6-A242-688E75C85B57
RememberRecentNetworks: 1
Ethernet Adaptor (en2):
Type: Ethernet
BSD Device Name: en2
Hardware (MAC) Address: 00:01:23:45:67:89
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
Ethernet Adaptor (en3):
Type: Ethernet
BSD Device Name: en3
Hardware (MAC) Address: 00:10:32:54:76:98
IPv4:
Configuration Method: DHCP
IPv6:
Configuration Method: Automatic
AppleTalk:
Configuration Method: Node
Proxies:
Exceptions List: *.local, 169.254/16
FTP Passive Mode: Yes
Volumes:
net:
Type: autofs
Mount Point: /net
Mounted From: map -hosts
Automounted: Yes
home:
Type: autofs
Mount Point: /home
Mounted From: map auto_home
Automounted: Yes
Universal Access:
Universal Access Information:
Cursor Magnification: Off
Display: Black on White
Flash Screen: Off
Mouse Keys: Off
Slow Keys: Off
Sticky Keys: Off
VoiceOver: Off
Zoom: Off

That's old info for the HDD space--I've purchased an external, so my main drive stays plenty free, now.

ITunes no longer loads "checked" songs onto my iPhone 5. It seem to be all or nothing or choose from the 4 categories. What happened to "sync only checked songs?"

iTunes no longer loads "checked" songs onto my iPhone 5. It seem to be all or nothing or choose from the 4 categories. What happened to "sync only checked songs?"

In the case you aren't trolling, here's some alternative mapping services.
Apple is constantly working on improving their new Maps service, but until it reaches the level of finesse necessary to be usable, take a look at some alternatives.
If you would like to send a suggestion to Apple, please go to http://www.apple.com/feedback or you can Report a Problem via the Maps app by tapping the bottom right.
Bing Maps offers a very good maps service with Bird's Eye, a feature similar to Flyover. It's arguably better than Google Maps.
http://itunes.apple.com/us/app/bing/id345323231?mt=8
You can use Google Maps by creating a shortcut to the Home Screen with help from the article below.
http://www.ign.com/articles/2012/09/20/how-to-get-google-maps-on-ios-6
MapQuest also has a very nice app available.
http://itunes.apple.com/us/app/mapquest/id316126557?mt=8
Nokia Maps is another great service that you can add to your Home Screen via a web shortcut.
http://m.maps.nokia.com
Waze is another very well reviewed app.
https://itunes.apple.com/us/app/waze-social-gps-traffic-gas/id323229106?mt=8
Here's an article detailing how to receive Public Transport directions.
http://www.wired.com/gadgetlab/2012/09/transit-apps-ios6-woes/?pid=3798
If you want a YouTube app, Google has made a very improved version available on the App Store.
http://itunes.apple.com/us/app/youtube/id544007664?mt=8

Load content in another viewing space... Button..Viewer..Video..Panorama.. Carousel..Dreamw..Flash..

Dear Reader,
I made a site with a custom player to show video. I made my own buttons in Flash. On type showed while hovering over the played video and are used for controlling play/pause - button for homepage and two buttons for the next or previous gallery. The other type are underneath the playing video and let you pick thumbnails whose links were shown in the player window.
First I wanted to use a carousel (Lee Brimelow) for the second type of buttons, but I couldn't integrate these with the rest of the player code (my flash-code knowledge is rather limited).
Later on I wanted to show a panorama wich I only got to work with the Away3D-method. In this case I couldn't integrate it with any other code, so I used Dreamweaver to let a viewer choose thumbnails. One can navigate in the viewer window by dragging in the window, so I left out the other navigation buttons within the player window, mentionned earlier.
Now I am thinking of this concept:
- Button(s) for Homepage and (Next/Previous) gallery;
- Viewer window, with
- timeslider and Play/Pause button integrated in case of a video or slideshow;
- dragging in case of a Panoramic view;
- Carousel for picking a subject that will be shown in the Viewer window.
Question:
- Can I combine these 3 types of the concept as Flash-movies and buttons/carousel in Dreamweaver and still have the carousel control the viewer window?
or:
- Should I do all in Flash and make a personal Flashplayer (like I did before) and study more Flash?
What tutorials could I take a look at? (For instance I found a lot of sites about how to make a carousel. I don't know how to make it control a viewer window (to make it load content in another window or space.)
Greatings,
Richafrost.

Hi,
Just wanted to clarify a few things to try and eliminate what could be causing the problem.
1. You are using rtmps protocol. Do you have SSL certificate configured and port 443 enabled?
2. When you tried playback via the hosted OSMF player was it via rtmps?
3. The standard way the request url is protocol://server-domain-or-IP/fms-app-name/[fms-app-instance-name/][codec-prefix:]file-pa th[filename-extension]. Could you try with that?
I tried to reproduce your issue with simple rtmp prtocol and here are my observations/suggestions :
1.When I first entered the source url I got the error you mentioned : "The video player is in the connection error state." However, when I publish the same .fla again it works fine.
2. When you are placing the on a computer on the same network and running the html in the browser, it might not have permission to access the network. You will generally get a pop-up saying "Flash Player has stopped a potentially unsafe option". In any case, in your Flash player settings manager you can go to the Advanced tab and add the location of the folder containing the swf as a Trusted location and then try to reload the page again. I get the "status bar spin" when the folder did not have permissions.
3. Also, when you try playback via Share Point can you go back to FMS and check if a connection request has actually come to the server. You can check under the access logs in root_install/logs or the application logs under root_install/logs/_defaultVHost_/vod/
Please let me know if this helps.
Thanks,
Apurva

E71 native browser doesn't loading

Hi I have nokia e71-1, s60 v3, sw version: 300.21.012 rm346, those value were taking while typing: *#0000# on my phone. The problem occurred after I got the message: "Memory is full", after that my phone was stack so I it was need to restart. it After restatrting I can not loading any more the browser. Can anyone advise me how can I reinstall the native browser or cause the browser to be loaded again. When I click on the beowser nothing happen.
Thanx Ronen

i have had this happen a couple times on my e90.
i found clearing the cache helped....so, the question you have now is how do you clean the cache if you cannot open the web browser?
install LCG x-plore - http://lonelycatgames.com/?app=xplore
or do a search for y-brower
open up lcg and then
c:/cache/vss
highlight all the files in vss and delete.
after you do that try your browser again and it should open.

Browser can't load sites using 1.4 plugin when service is running

Hi,
I am having some strange problems and am hoping someone here might be able to offer some insight to help me solve it.
Some customers have reported a problem with our software that runs as a service on Windows machines. When the service is started, they cannot use IE or Netscape to view sites that require the Java 1.4 plugin [They have 1.4.2 installed].
We tried to reproduce the problem here and were unable to. We tried a different machine and now can reproduce it all the time. All of our test machines and the customer's test machines have the same software installed - except for hardware drivers.
Here is what happens:
If the browser is open already, and our software service is started, then the browser has no problem connecting and viewing applets that use the 1.4 plugin.
If the browser is not open when the service is started, then when the browser is opened one cannot view applets that require the 1.4 plugin.
So, it seems as though everything works fine as long as the browser is open before running our service. If the browser is closed when the service is started, then there seems to be some conflict with the 1.4 plugin and the browser will not load sites that require it.
Any ideas what may be happening here?
Thanks!

Hi all,
I have the same problem. If I start Tomcat 5.0.24 as a service on my Win2k and
open a page containing an applet (using 1.4.2_02 plugin) the IE hangs.
If the IE started before the Tomcat service then it works fine.
Any comments would be appreciated.
Regards,
Peter Bartha

Purchased Content -- Error Loading Content Persists

I've been recieving the "Error Loading Content" message even after Restarting and Restoring my 3rd Gen Apple TV.
This only happens with purchased iTunes content -- movies, shows -- and not Netflix content, etc.
Anything I can try?

There are two location redirects send by the server on that request and Firefox doesn't allow that.
* http://www.bimmerpost.com/forums/showthread.php?t=593711&goto=newpost
Location: http://e89.zpost.com/forums/showthread.php?t=593711&goto=newpost
Location: http://www.bimmerpost.com/forums/showthread.php?s=573ac68950c42d88c06365e73c215759&p=10568611#post10568611
If you leave out the &goto=newpost then only one redirect is send and it works.<br />
If you click the above link that has a trailing ')' then that also makes the server send only one redirect because that link is no longer valid.

Nokia E71x browser no longer loading content corre...

Similar Messages

Maybe you are looking for