Nokia E75 and imap-client

Hi
anyone else seen next feature:
When reading mail with imap from gw, client is about 90% cases saying
downloading/getting etc mail and stays in that statusmessage forever.
And ofcourse no mail is fetched from server.
Any know or unknown switches to make IMAP work better for Nokia
Exx-phones in GWIA?
mikkoim @ metropolia

Mikko,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

  • Resetting a nokia E75

    I have a nokia e75 and i forgot the lock code. It was changed from the original lock code of 12345. I've tried resetting using the codes but have been unable to enter them as the only option i have on start up is to enter the lock code. How do I fix this?

    No offence, but how do we know that this is your device? You can bring it in to a Nokia Care Point to get it unlocked.
    http://europe.nokia.com/support/repair-and-recycle/repair/care-points
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • Maps and navigation with the Nokia E75

    Hi
    I am thinking of buying the Nokia E75. Can you now download maps from the noikia store for free
    or is there a one of price or perhaps a subscription And would then also cost to use GPS for turn by turn navigation?

    As E75 is an S60 3rd Ed. FP2 device there are a couple of things to point out. Firstly whilst you can download regional mapping for offline use using Nokia Suite you would need to purchase a navigation license for voice navigation and secondly as device uses map data series 00.01.29.100 it is getting further out of date as time goes by.
    There can be an issue with license manager to allow you to purchase navigation license from shop and may need to backup essential data and restore device to "Out of box" state by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by user) and re-install nokia_maps_3.01_09wk44_b01_s60_3.1_lm_rom.sis ‏5410 KB
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Unity Connection 8.x and Novell GroupWise IMAP client.

    Hi,
    Unity Connection 8.x clusters, the customer is using Novell Groupwise for email message store. We would like to setup GroupWise IMAP for them.
    However one of the customer's restrictions is that they locked down the end-users computers so that Unity Connection message can not be downloaded into end-user's local PC.
    I understand that on Unity Connection COS we can setup the option end-user can only access message header, but they have to dial-in the main-pilot number to retrieve message or use web-inbox tool.
    (1) Is there any way for us to setup the IMAP, so that end-user retrieve message while the message is still in centralized Unity Connection server?
    (2) If option (1) is not possible, can we setup the message folder of IMAP client to a network shared drive such as H, M drive instead of default local drive?
    (3) Any other solution or workaround?
    Thanks,
    JJ

    See sample depiction below of applications and physical core usage on a server with 2 CPUs and 8 total physical cores. In white is the reservation of one physical core.
    Regards.

  • 10.8 client  and 10.6 server email pop and imap problem

    Hi Guys ,
    My problem is 10.8 client and 10.6 server.
    10.6 server have email server running (pop and imap), when i configure same email account (pop) on 10.7 machine  and 10.8 machines , 10.7 machine works , but 10.8 pop does not working
    let me explaing further :
    when i use 10.8 mail application to  setup pop mail account it does not connecting . But  i used the same account to connect imap it connect on 10.8 machine.
    the same mail account connect to another 10.7 machine  with POP and IMAP for testing reason , it works with out any issues
    POP server is running and this email account's users profile enable POP and IMAP mail settings.
    thanks in advance.

    Try checking the Authentication Type for the POP account.  It is located in Mail > Preferences > Accounts > selected account > Advanced
    10.8 tends to use Apple Token.  I think you will need to use a type of MD5 Challenge-Response or Password.

  • Lumia 800 - pop3 and imap

    Anybody setup a POP3 account on the phone and find that it works 100% like an IMAP setting? POP3 traditionally does not synchronise backwards, i.e. you download message to phone and leave original on server, delete off phone, it stays on the server. However in their wisdom it seems that not only can you NOT switch easily between a POP3 and IMAP account setting (you need to delete the account and then reinstall it), it also has defaulted that the POP3 setting, is the EXACT same as an IMAP.
    Am I missing something? Granted this is only my 5th smartphone and 50th time I have set the same account up, but yeah must definately be me, as a company like Nokia would of checked their programs before giving it out... right?
    Any assistance, including proving that it is me stuffing it up, would be greatly appreciated.
    Thanks in advance,
    LUCH

    Hi LUCHlumia800,
    Thanks for your feedback and welcome to the forum.
    What you describe is not really what is different between POP and IMAP. POP actually does allow for syncing back to the server and remove mail there once deleted on the client. Actually POP can (optionally) be configured to either remove from server when removed on the client or remove from server once fetched. While these options are available implementation is not compulsory.
    IMAP on the other hand basically mirrors the server and client sides so whatever happens on one side also happens on the other including adding or removing folders.
    Hope this helps,
    Kosh
    Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

  • What is POP, POP3, and IMAP When I Setup My Email Account in the HP ePrint App?

    I have done as much research as I can do in regards to setting up the HP ePrint App Email Accounts.  If you do not see your email information listed here, feel free to post it below or contact your internet service provider, phone or email company, or whomever else that might know this. I am certain there are many more that could be added but this is a rather extensive list.  I hope you find what you need to finish setting up your email applications.
    I have noticed information differs from website to website but as I have learned over time, with domain masking and companies buying out other companies, I just researched all the information I could find and that way if one of the hostnames or ports don’t work, then you can continue to view further into this page to see if that information is the same. At that point, if you can’t find what you need here, I would say you have done all that you can do before contacting the appropriate support team for your email information.  
    Most of the links are active and the ones listed below should send you directly the pages I pulled this information from but only a few of them were from the actual support sites themselves (Apple support was vague, as well as Microsoft, Macintosh, and commonly used ISPs). Save yourself some time by searching here first. I hope you find what you need in this one-stop-shop and if you get an email address not listed here please post it below and I will add it to this original document.
    Lastly, as this information is from forum-based and other unofficial websites, I would like to add that this is a copy/paste/edit-for-easy-reading document I created in my spare time. This is a very long document so I do recommend using the search and find quick keys to search for the email you need but the top part of this has definitions as to what servers, ports, and hostnames are and the basic setup in case you need to know what these options are used for and what they mean.
    Below are the most common settings needed to set up most POP3/IMAP Email Clients or Devices:
    The following information below can be found at http://www.swestcom.com/Support/q4.htm
    “What is POP3?
    Post Office Protocol version 3 (POP3) is a standard mail protocol used to receive emails from a remote server to a local email client. POP3 allows you to download email messages on your local computer and read them even when you are offline."
    "What is IMAP?
    The Internet Message Access Protocol (IMAP) is a mail protocol used for accessing email on a remote web server from a local client. IMAP and POP3 are the two most commonly used Internet mail protocols for retrieving emails. Both protocols are supported by all modern email clients and web servers."
    "Main difference between IMAP and POP3:
    The POP3 protocol assumes that there is only one client connected to the mailbox. In contrast, the IMAP protocol allows simultaneous access by multiple clients. IMAP is suitable for you if your mailbox is about to be managed by multiple users."
    "What is SMTP?
    Simple Mail Transfer Protocol (SMTP) is the standard protocol for sending emails across the Internet. SMTP uses TCP port 25 or 2525 and sometimes you can have problems to send your messages in case your ISP has closed port 25 (How to check if port 25 is open?). To determine the SMTP server for a given domain name, the MX (Mail eXchange) should have more information."
    "When setting up:
    POP - choose POP and the incoming server port will default to 110
    IMAP - choose IMAP and the incoming server port will default to 143
    All other settings are the same.
    Username = [email protected]
    Password = the password you set up when you configured your mail box
    Incoming Mail Server = mail.yourdomain.com
    Outgoing Mail Server= smtp.yourdomain.com
    Outgoing Server Requires Authentication (typically found in advanced options or settings)
    Do NOT check "Log on Using Secure Password Authentication"
    Use the same Username and Password as Incoming or select "Use Same Settings as Incoming"
    Outgoing Server Port= 2525 or 587This is subject to change based on the individual preferences of your ISP"
    Note - Substitute your actual domain name for "yourdomain.com" and substitute the first part of your email address for "user."
    Email Ports
    For networks, a port means an endpoint to a logical connection. The port number identifies what type of port it is. Here are the default email ports for:     
    POP3 - port 110
    IMAP - port 143
    SMTP - port 25
    HTTP - port 80
    Secure SMTP (SSMTP) - port 465
    Secure IMAP (IMAP4-SSL) - port 585
    IMAP4 over SSL (IMAPS) - port 993
    Secure POP3 (SSL-POP) - port 995.
    For Mozilla, Outlook, Windows mail, Windows Live, Outlook 2003-2010, Entourage for Mac OS, and Mail for Mac OS follow this link: http://help.outlook.com/en-ca/140/cc875899.aspx    (this website has not been looked over for validation but may assist in other leads towards the right direction)
    Have you ever wished you could use your AOL email account with something else, something more powerful, something more convenient than AOL, something like Outlook, Windows Mail, Outlook Express, or The Bat!? Thanks to the wonders of IMAP, you can.
    If you set up your AOL email account in any email client capable of IMAP, you can receive and send messages easily. Even the AOL folders — Spam, Saved, Sent Items and your Trash will be there automatically. Of course, you can also use POP to fetch incoming mail in an uncomplicated fashion.
    For instructions on how to assist you with this you can also follow this link: http://email.about.com/od/aoltips/qt/Access_an_AOL_Email_Account_with_any_POP_IMAP_Email_Program.htm
    Set Up POP or IMAP E-Mail on an Android G1 How do I set up POP or IMAP E-Mail on an Android Device?
    From the home screen, tap Applications > Settings > Accounts & sync > Add account > Manual setup.
    On the Incoming settings screen, in the Protocol drop-down menu, select IMAP or POP3. We suggest you select IMAP because it supports more features.
    In the Email address and Username text boxes, enter your full e-mail address, for example [email protected], and then select Next. Your user name is the same as your e-mail address.
    In the Password text box, enter your password.
    In the IMAP server or POP3 server text box, enter your IMAP or POP server name. For information about how to look up the server settings you need to complete this step and other steps in this procedure, see “How do I find the server settings” later in this topic.
    In the Security type drop-down menu and Server port text boxes, specify the POP or IMAP settings that you looked up in step 5, and then tap Next. Your e-mail application will check your IMAP or POP settings.
    On the Outgoing server settings screen, the Login required option should be selected for you, and the Username and Password text boxes should be filled in.
    In the SMTP server text box, enter the SMTP server name you looked up in step 5.
    In the Security type drop down menu and Server port text box, specify the SMTP settings that you located in step 5, and click Next.
    In the Account name, text box, enter a name for your account (for example “Office 365 email” or “Work email”). In the Your name text box, enter the name you want displayed when you send e-mail to others (for example “Tony Smith”), and then select Finish Setup.
    What else do I need to know?
    If your e-mail account is the type that requires registration, you must register it the first time you sign in to Outlook Web App. Connecting to your e-mail account through a mobile phone will fail if you haven't registered your account through Outlook Web App. After you sign in to your account, sign out. Then try to connect using your mobile phone. For more information about how to sign in to your account using Outlook Web App, see How to Sign In to Your E-Mail Using a Web Browser. If you have trouble signing in, see FAQs: Sign-in and Password Issues or contact the person who manages your e-mail account.
    Information below provided by: http://www.defcon-5.com/support/index.cfm?docid=95
    Yahoo:
    POP3: pop.mail.yahoo.com Port 995
    SMTP: smtp.mail.yahoo.com Port 465
    ESMTP should be enabled
    SSL: YES
    User name must not include the @yahoo.com
    GMail:
    POP3: pop.gmail.com Port 995
    SMTP: smtp.gmail.com Port 465
    ESTMP should be enabled
    SSL: YES
    AOL:
    IMAP: imap.aol.com Port 143
    SMTP: smtp.aol.com
    SSL: NO
    ATT World Net:
    POP3: ipostoffice.worldnet.att.net Port 995
    SMTP: imailhost.worldnet.att.net Port 465
    SSL REQUIRED for Incoming and Outgoing
    Cox:
    NOTE: With Cox you can only use their SMTP servers while on their network.
    Central
    POP3: pop.central.cox.net
    SMTP: smtp.central.cox.net
    ESMTP should be enabled
    SSL: NO
    East Cost
    POP3: pop.east.cox.net
    SMTP: smtp.east.cox.net
    ESMTP should be enabled
    SSL: NO
    West Cost
    POP3: pop.west.cox.net
    SMTP: smtp.west.cox.net
    ESMTP should be enabled
    SSL: NO
    Comcast:
    POP3: pop3.comcast.net Port 110
    SMTP: smtp.comcast.net Port 587
    ESMTP should be enabled
    SSL: NO
    User name must NOT include @comcast.net
    Comcast SMART ZONE:
    POP3:  sz-pop.mail.comcast.net Port 995
    SMTP: smtp.compcast.net Port 587
    ESMTP should be enabled
    SSL: NO
    User name must NOT include @comcast.net
    Earthlink:
    POP3: pop.earthlink.net Port 110
    SMTP: smtpauth.earthlink.net Port 587
    ESMTP should be enabled
    SSL: NO
    User name must include @earthlink.net
    Hughes Net:
    POP3: mail.hughes.net Port 110
    SMTP: smtp.hughest.net Port 25
    ESMTP should be enabled
    SSL: NO
    User name must include @hughes.net
    Metrocast:
    POP3: pop.va.metrocast.net Port 110
    SMTP: smtp.va.metrocast.net Port 25
    ESMTP should NOT be enabled
    User name MUST be full email address
    SSL: NO
    MSN:
    POP3: pop 3 . live. com  port #995.
    SMTP: smtp.live. com port #25
    SSL: YES
    ESMTP: should be enabled
    User name must have the full email address
    NetZero:
    POP3: pop.netzero.com Port 110
    SMTP: smtpauth.netzero.com Port 25
    ESMTP should be enabled
    SSL: NO
    User name must include @netzero.com
    Verizon:
    POP3: incoming.verizon.net Port 110
    SMTP: outgoing.verizon.net Port 25
    ESMTP should be enabled
    SSL: NO
    The following information is according to a forum comment at the bottom of this webpage concerning HOTMAIL and mail server settings:
     “As other web based email services, Hotmail is using the HTTP protocol for connecting you to your mailbox. If you want to send and receive Hotmail emails using an email client software, then your software must support Hotmail HTTP access for your email account. Some email clients, such as Outlook Express or Microsoft Outlook, offer builtin support for Hotmail accounts, so you only have to select HTTP when you are asked to select your email account type and select Hotmail as the HTTP Mail Service Provider.”
    Mail Server Settings for Hotmail using the Microsoft Outlook Connector
    If you are using Microsoft Outlook & the Outlook Connector, you can define your Hotmail account just like any regular POP3 email account:
    Hotmail Incoming Mail Server (POP3) - pop3 . live. com  (logon using Secure Password Authentification - SPA, mail server port: 995)
    Hotmail Outgoing Mail Server (SMTP) -smtp . live . com (SSL enabled, port 25)
    Additional information from this website has not been confirmed or validated as of yet but it does include additional information or perhaps corrected information. If the above steps do not fix the problem with setting up an email account for the HP Apps then read on:
    Yahoo! Mail Settings
    Yahoo Mail offers standard POP3 access for receiving emails incoming through your Yahoo mailbox, by using your favorite email client software. To setup your email client for working with your Yahoo account, you need to select the POP3 protocol and use the following mail server settings:
    Yahoo Incoming Mail Server (POP3) - pop.mail.yahoo.com (port 110)
    Yahoo Outgoing Mail Server (SMTP) - smtp.mail.yahoo.com (port 25)
    POP Yahoo! Mail Plus email server settings
    Yahoo Plus Incoming Mail Server (POP3) - plus.pop.mail.yahoo.com (SSL enabled, port 995)
    Yahoo Plus Outgoing Mail Server (SMTP) - plus.smtp.mail.yahoo.com (SSL enabled, port 465, use authentication)
    · Google GMail Settings
    The Google GMail service offers email client access for retrieving and sending emails through your Gmail account. However, for security reasons, GMail uses POP3 over an SSL connection, so make sure your email client supports encrypted SSL connections.
    Google Gmail Incoming Mail Server (POP3) - pop.gmail.com (SSL enabled, port 995)
    Outgoing Mail Server - use the SMTP mail server address provided by your local ISP or smtp.gmail.com (SSL enabled, port 465)
     MSN Mail Settings
    The MSN email service allows you to use the MSN POP3 and SMTP servers to access your MSN mailbox.
    MSN Incoming Mail Server (POP3) - pop3.email.msn.com (port 110, using Secure Password Authentication - SPA)
    MSN Outgoing Mail Server - smtp.email.msn.com (select "My outgoing server requires authentication")
     Lycos Mail Settings
    The Lycos Mail Plus service allows you to use POP3 and SMTP servers for accessing your Lycos mailbox.
    Lycos Mail Incoming Mail Server (POP3) - pop.mail.lycos.com (port 110)
    Outgoing Mail Server - smtp.mail.lycos.com or use your local ISP SMTP mail server
     AOL Mail Settings
    The AOL email service is a web based system, designed for managing your AOL mailbox via HTTP IMAP access. Unlike Hotmail, you can use any email client to access your AOL mailbox, as long as it supports the IMAP protocol.
    AOL Incoming Mail Server (IMAP) - imap.aol.com (port 143)
    AOL Outgoing Mail Server - smtp.aol.com or use your local ISP SMTP mail server
     Mail.com Mail Settings
    The Mail.com email service allows you to use POP3 and SMTP servers for accessing your Mail.com mailbox.
    Mail.com Mail Incoming Mail Server (POP3) - pop1.mail.com (port 110)
    Outgoing Mail Server - use your local ISP SMTP mail server
     Netscape Internet Service Mail Settings
    The Netscape e-mail system is web-based, which means you can access their e-mail from any Internet connection. Netscape Internet Service also supports AOL® Communicator, Microsoft® Outlook, Microsoft® Outlook Express, and other POP3 e-mail software. The outgoing mail server needs SSL support, so make sure your email client software supports SSL connections over the SMTP protocol.
    Netscape Internet Service Incoming Mail Server (POP3) - pop.3.isp.netscape.com (port 110)
    Netscape Internet Service Outgoing Mail Server - smtp.isp.netscape.com (port 25, using a secure SSL connection)
    Tiscali Mail Settings
    The Tiscali email service allows you to use POP3 and SMTP servers for accessing your Tiscali mailbox.
    Tiscali Incoming Mail Server (POP3) - pop.tiscali.com (port 110)
    Outgoing Mail Server - use your local ISP SMTP mail server
    Freeserve Mail Settings
    The Freeserve email service allows you to use POP3 and SMTP servers for accessing your Freeserve mailbox.
    Freeserve Incoming Mail Server (POP3) - pop.freeserve.com (port 110)
    Outgoing Mail Server - use your local ISP SMTP mail server
    Supanet Mail Settings
    The Supanet email service allows you to use POP3 and SMTP servers for accessing your Supanet mailbox.
    Supanet Incoming Mail Server (POP3) - pop.supanet.com (port 110)
    Outgoing Mail Server - use your local ISP SMTP mail se
    AT&T SMTP IMAP Server
    smtp.att.yahoo.com
    SSL Port 465
    imap.att.yahoo.com
    SSL Port 993
    Iphone POP/IMAP Setup
    Although I am sure it is out of scope for HP to assist with iPhone setup with mail, contact, calendars, etc so here is a PDF with pictures and a walkthrough from:
    https://www.millikin.edu/it/services/HandH/Documents/iPhone%20IMAP%20POP%20Setup.pdf 
    This hyperlink seems inactive so you may have to copy and paste for a direct walkthrough of this comprehensive pdf.
    Lastly if the above information is incorrect or does help, here is one last website to provide you with a complete list that I found located at att.com to assist their customers trying to setup emails in conjunctions with their apps.
     Popular POP and IMAP e-mail providers and their incoming server names
    http://www.wireless.att.com/support_static_files/KB/KB5892.html
    SUBJECT:
    Popular POP and IMAP e-mail providers and their incoming server names
    What are the AT&T outgoing (SMTP) server names?
    SYMPTOM:
    ISP E-mail servers
     E-mail
    ADVISORY:
    This information has been retrieved from the proper e-mail provider support pages. This is not an exhaustive list, please refer to your e-mail provider for additional information and compatibility.
    FIX:
    Outgoing Servers
    AT&T outgoing SMTP server policy
    Incoming Servers
    Users must contact their e-mail service providers for server addresses not included in this list.
    Incoming POP3 server uses default port of 110.
    Incoming IMAP4 server uses default port of 143.
    When using SSL (Secure Socket Layer):
    The incoming POP3 port needs to be set to 995.
    The incoming IMAP4 port needs to be set at 993.
    Internet Service Provider (ISP)
    Incoming Server Address
    Username
    Port
    1and1.com
    POP: pop.1and1.com
    IMAP4: imap.1and1.com
    More information at 1and1.com Article.
    full e-mail address
    POP3: 110
    IMAP4: 143
    Adelphia
    mail.adelphia.net
    username only
    POP3: 110
    Airmail.net (Internet America)
    pop3.airmail.net
    username only
    Alltel.net
    (See Windstream)
    Ameritech (at&t Yahoo!)
    pop.att.yahoo.com
    More information on support article.
    full e-mail address
    POP3: 995
    uses SSL
    AOL (America Online)
    Instructions and Disclaimer
    username only
    IMAP4: 143
    AIM Mail
    Instructions and Disclaimer
    username only
    IMAP4: 143
    AT&T Broadband Internet (ATTBI)
    mail.attbi.com
    AT&T Worldnet
    ipop.worldnet.att.net
    -or-
    ipostoffice.worldnet.att.net
    Informational only:
    AT&T WorldNet e-mail may not be accessible from any device e-mail client due to firewall restrictions implemented by AT&T WorldNet.
    See alternatives for accessing AT&T WorldNet:
    - Former AT&T Wireless customers
    - New and Existing AT&T wireless services customers
    full e-mail address
    POP3: 995 uses SSL
    Bell Atlantic (Verizon)
    pop.bellatlantic.net
    Bell South
    mail.bellsouth.net
    username only
    Cable One
    mail.cableone.net
    More information at Cable One.
    username only
    Cablevision
    mail.optonline.net
    username only
    Charter
    pop.charter.net
    username only
    Clearwire
    mail.clearwire.net
    More information at Clearwire Article.
    full e-mail address
    POP3: 110
    Comcast
    mail.comcast.net
    More information at Comcast Article.
    username only
    POP3: 110
    ComNetcom.net (Earthlink)
    pop.comnetcom.net
    Compuserve Classic
    pop.compuserve.com
    Compuserve
    imap.cs.com
    username only
    Concentric
    pop3.concentric.net
    Coqui (Puerto Rico)
    pop.coqui.net
    Covad
    pop3.covad.net
    More information on support article.
    full e-mail address
    POP3: 110
    Cox Central
    pop.central.cox.net
    More information at Cox Article.
    username only
    POP3: 110
    Cox East
    pop.east.cox.net
    More information at Cox Article.
    username only
    POP3: 110
    Cox West
    pop.west.cox.net
    More information at Cox Article.
    username only
    POP3: 110
    Cox Business
    pop.coxmail.com
    More information at Cox Business Article.
    full e-mail address
    POP3: 110
    Earthlink
    pop.earthlink.net
    full e-mail address
    POP3: 110
    Eudora
    mail.speakeasy.net
    Excite
    pop3.excite.com - Requires "Premium/Gold" subscription for POP3 access. More information at Excite.com Article.
    full e-mail address
    POP3: 110
    Flash (SBC Yahoo!)
    pop.att.yahoo.com
    More information on support article.
    full e-mail address
    POP3: 995
    uses SSL
    Gmail (Google Mail)
    Instructions and Disclaimer
    full e-mail address
    POP3: 995 uses SSL
    Go Daddy.com
    pop.secureserver.net
    More information at Go Daddy.com Article.
    full e-mail address
    POP3: 110
    Grande
    mail.grandecom.net
    More information at Grande Article.
    username only
    POP3: 110
    GTE.net (Verizon)
    mail.gte.net
    Hughes Direcway
    mail.hughes.net
    More information at Hughes Direcway Article.
    full e-mail address
    POP3: 110
    Ix.Netcom.com (Earthlink)
    pop.ix.netcom.com
    Insight Broadband
    mail.insightbb.com (SSL must be enabled for remote access)
    More information at Insight Broadband Article.
    username only
    Juno
    POP3/IMAP4 is not available.
    More information on support article.
    Lightfirst (Avenew)
    inmail.lightfirst.com
    Mac.com (Apple Computer)
    mail.mac.com
    POP3 access will not work with "alias" accounts.
    More information at Mac.com. Related articles 25275, 51729, and 86685.
    username only
    POP3: 110
    IMAP4: 143
    Mail.com
    pop1.mail.com
    POP3: 110
    Mediacom
    mail.mchsi.com
    More information at Mediacom Article.
    full e-mail address
    POP3: 995 uses SSL
    MEdia Net
    POP3 access is currently not available to MEdia Net e-mail accounts. Please access MEdia Net e-mail through the device browser.
    POP3: 110
    Mindspring (Earthlink)
    pop.mindspring.com
    full e-mail address
    POP3: 110
    mMode
    pop.mymmode.com
    username only
    POP3: 110
    MSN
    pop3.live.com
    For subscribers that use (and pay for) MSN as their Internet Service Provider, MSN provides POP3 access to their e-mail. More information on configuring e-mail applications, see Microsoft Article 930008.
    Alternatives for accessing MSN from a mobile device:
    - Former AT&T Wireless customers
    - New and Existing AT&T wireless services customers
    full e-mail address
    POP3: 995
    uses SSL 
    MSN Hotmail
    MSN Hotmail is a HTTP e-mail service so a POP3 server name is not offered by MSN Hotmail. While some 3rd party e-mail servers allow access to Hotmail accounts, this may put e-mail security at risk. AT&T will not house 3rd party e-mail server information.
    Alternatives for accessing MSN Hotmail from a mobile device:
    - Former AT&T Wireless customers
    - New and Existing AT&T wireless services customers
    NetAddress or Usa.net
    pop.netaddress.com
    POP3: 110
    Network Solutions
    mail.yourdomain.com
    Network Solutions Support Page
    full e-mail address
    POP3: 110
    NetZero (United Online)
    pop.netzero.com
    NetZero E-mail Support Page
    username only
    POP3: 110
    Netscape
    pop3.isp.netscape.com
    Netscape E-mail Support Page
    full e-mail address
    POP3: 110
    NVBell (SBC Yahoo!)
    pop.att.yahoo.com
    More information on support article.
    full e-mail address
    POP3: 995
    uses SSL
    OptOnline
    mail.optonline.net
    OptOnline Support Article
    username only
    PacBell (SBC Yahoo!)
    pop.att.yahoo.com
    More information on support article.
    full e-mail address
    POP3: 995
    uses SSL
    PeoplePC
    mail.peoplepc.com
    - or -
    pop.peoplepc.com
    PeoplePC Support Article
    full e-mail address
    POP3: 110
    Pipeline (Earthlink)
    pop.pipeline.com
    POP3: 110
    Prodigy (SBC Yahoo!)
    pop.att.yahoo.com
    More information on support article.
    full e-mail address
    POP3: 995
    uses SSL
    Qwest in Albuquerque, New Mexico
    pop.albq.qwest.net
    POP3: 110
    Road Runner
    pop-server.xxxx.com
    "xxxx" equals the users e-mail domain, which can be in the region format ("cfl.rr" for Central Florida or "nyc.rr" for New York City) or simply "roadrunner". The domain can be found after the @ symbol in the e-mail address i.e. [email protected] or [email protected]
    Road Runner Support Pages - Choose the appropriate region/state and select the Help menu to locate e-mail settings as they are different based on each region/state.
     username only
    POP3: 110
    sbcglobal.net
    pop.att.yahoo.com
    More information on support article.
    full e-mail address
    POP3: 995
    uses SSL
    snet.net
    pop.att.yahoo.com
    More information on support article.
    full e-mail address
    POP3: 995
    uses SSL
    Surewest
    pop.surewest.net
    More information at Surewest Article.
    full e-mail address
    POP3: 110
    swbell.net
    pop.att.yahoo.com
    More information on support article.
    full e-mail address
    POP3: 995
    uses SSL
    Verizon
    incoming.verizon.net
    username only
    POP3: 110
    Verizon (custom server)
    pop.verizonemail.net
    POP3: 110
    Verizon (Yahoo! Mail)
    incoming.yahoo.verizon.net
    More information at Verizon Yahoo! Article.
    full e-mail address
    POP3: 110
    wans.net
    pop.att.yahoo.com
    More information on support article.
    full e-mail address
    POP3: 995
    uses SSL
    Websitepros
    Server information varies on product.
    Contact Information
    Windstream
    pop.windstream.net
    More information on support article.
    full e-mail address
    POP3: 110
    Yahoo!
    pop.mail.yahoo.com - Requires a monthly subscription fee for POP3 access.
    More information on support article.
    See Alternatives for accessing Yahoo! E-mail:
    - Former AT&T Wireless customers
    - New and Existing AT&T wireless services customers
    username only
    POP3: 995
    uses SSL
    Yahoo Small Business
    pop.bizmail.yahoo.com
    "Forwarding" must be disabled and "POP access" must be enabled. Yahoo Small Business Support Page
    SPAM/Bulk folders should be emptied if receiving errors occur.
    full e-mail address
    POP3: 110
    If you are viewing information on devices or services, please note: content reflects instructions for devices and services purchased from AT&T. Some differences may exist for devices not purchased from AT&T.
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!
    This question was solved.
    View Solution.

    Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app.  I am certain other applications also need this information.  Although lengthy, I could not find a more comprehensive place to retrieve this information.  Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • Nokia E75 does not support sis files

    I've been trying to upgrade the Ovi maps on my E75, because navigation has kept me saying that I need to renew the license. I went to Nokia web site and found out that I need to upgrade Ovi maps in order to get the free navigation. I have a 202.12.01 firmware and I installed it once again when I had unsuccessfully tried to upgrade Ovi maps. I have Ovi maps v3.01 09wk44b01 (MW OpenGL LM MN) and Map version 0.1.24.114 (OpenBitLM 6.22.5). I've deleted all old maps and started to download new ones successfully over Nokia Ovi Suite. I've downloaded Nokia Ovi Suite and followed the instructions for downloading and installing the newest version of Ovi maps application (I suppose it must be newer than the one I have on now, because navigation still wants me to buy license, I guess it must be 3.03 or higher). I've tried it several times from the scratch, just to make sure I did it right. Of course I've also chosen the right E75 phone from the drop down menu and I downloaded the file nokia_maps_3.01_09wk44_b01_s60_3.2_lm_rom.sis. I double-clicked it and everything seems to be right, but when action on the phone should be required the installation guide says "Nokia E75 does not support sis files". From the sis file name I can only now see that I have this version already installed.
    Does this mean I can not use navigation for free on E75?
    Can anybody help me ASAP, because I need the navigation evey day very badly?

    I'v followed the directions of chanchan05 "Just uninstall the maps app, delete the folder and file I mentioned, then reboot your phone. Open the maps app, and it should recreate the qf file and cities folder in a version compatible to 3.03." on /t5/Maps-Navigation-and-GPS/Wasn-t-it-supposed-to-be-quot-Navigation-on-your-Nokia-Free/m-p/668305#M...
    Afterwards I installed the sis file you pointed me to and it worked. The maps on the phone were deleted, so I downloaded new ones over Nokia Ovi Suite and tried the navigation. Unfortunately it stills demands buying the licence for the navigation.
    I guess this is because the recommended sis file is v3.01 and not v3.03? Is that right?
    Any other solution?

  • Nokia E75 - sent mail

    Hi there
    I have an E75 and it is syncing nicely with two separate work e mail addresses. One syncs with Outlook via Mail for Exchange and updates calendar, tasks, contacts etc perfectly.
    The other is not through Mail for Exchange - it syncs with a company server over the web.
    My problem is with this second account - and the problem is that when I send an e mail using the phone, the e mail itself does NOT end up in my "Sent Items" box on my PC. It just disappears. It obviously goes into "sent items" on the phone....but not on the PC.
    Can anyone help me to make it so my sent e mails end up in my "sent items" box on my PC please?
    And just to repeat, this account does NOT not use Mail for Exchange to connect.
    Thanks
    Ian

    well i'm here to dissapoint you, but your sent messages will not be synced, but there is a way to get them on your computer.
    you have following options:
    when you sent your mail enter in BCC field your email address this way you will receive your sent mail into your inbox.
    i prefer this way - all my mails sent or received are kept in same box. it is also makes it easy for viewing -on my computer i have email client setup for threaded viewing and it gives "conversation" feel to email.
    you go to your sent box on you mobile and manually move message to inbox - in "sent items" press options-> actions -> and you can choose inbox. then you will see your message in your inbox, but still not in sent folder unless of course you will then again manually move this email to sent folder on you computer.
    # if you have found my comment useful please click on KUDOS! button #

  • About TV-out in nokia E75

    I reseve this message in my nokia e75 from nokia
    Tip:Enjoy your photos and videos on a big screen. Connect your device to a TV and watch your favourite photos and videos in a slide show >>>
    what that mean ?????????

    I receive this message from Nokia
    this is message details :
    From :
    Nokia
    Date:
    16/09/2010
    type:
    Text message
    thank you for reply
    Attachments:
    Scr000003.jpg ‏42 KB

  • Nokia e72 and where did the memory go????

    New Nokia e72, after the disappointing Nokia E75 i really didn`t expect Nokia to release another unfinished phone!
    Dont get me wrong, great Phone the E72, solid hardware, but it has the same memory problem found in other nokia devices. 42 M at start up. Tried to go on the internet with the build in browser, 2 big flash sites like CNN and sadly the memory was down to between 356 K to 1 M, and the phone didn´t react anymore. After shuting down the browser, the E72 had 42 M in free memory again. It's the same story when using Spotify or Youtube. 
    Is there any one else with the same problem?  What will/can Nokia do about it?
    Best regards

    I am using the program PhoNetInfo to check for available RAM.  Find it at http://www.patrickfrei.ch/phonetinfo/index.html.  Not sure if there's an easier solution?  You will need to follow the instructions to have it signed at http://symbiansigned.com for it to work.
    As for the main thread, I am using an E73, which is basically the same as an E72.  Memory was one of the shortcomings I knew about when buying the phone, but so far I have hit only one browser "Out of memory" error.  Guess the sites I use either have a mobile version or simply aren't so memory intensive?  But I might look at this problem from the other perspective.  Unless they're loaded with pictures, web sites that trigger "Out of memory" are probably obscenely FAT!  I marvel at the design of certain modern web sites.  It's as if the programmers get paid by line of code, or are in competition to win this year's Rube Goldberg prize, for the most unnecessarily complicated invention.  Try downloading such a web site over a dial-up connection.  In this case, the problem is totally different, but the resulting frustration is the same.  And IMHO, the cause is the same: BAD DESIGN.  Simpler is better for visitors and both cheaper and easier to maintain.
    Has anybody tried the Skyfire?  While it likely has some problems of its own, I assume it will work around a straightforward "Out of memory" error...because it's not a real web browser?

  • Nokia E75 Battery Status Indicator?

    Hello, well i have a problem. on most phones, if you go in the settings, there will be a section where it says all of the phone status. and i find this really useful when it comes to the battery. But on the Nokia E75 i cant seem to find the battery status indicator. Does anyone know where it is?
    ***Battery Status Indicator is where is says how much percent of the battery is left. 

    Faulty battery maybe. The battery has circuitry that reports its charge level and it sounds like that isn't working. You should have it replaced under warranty if possible!

  • No Attachments with IMAP Client

    We are having an intermittent issue where we cannot see attachments using an IMAP client. I thought this might've been a NotifyLink issue, but we still have the problem when using Thunderbird via IMAP. I saw some other threads about missing attachments with IMAP, but I did not see any addressing GW8.0.2, which we have across the board. Any ideas on how to correct? If I missed a thread that addresses this, please point me to it.
    Thanks,
    -Jason

    Jasonpgutierrez,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Nokia E75 wont turn on

    I was carrying my nokia e75 in my pocket and I looked into phone and it was turned off. I tried to turn it on but when I press turn on/red phone button nothing happens. I thought that battery is empty and I connected phone to charger, and when I connect it it gives "charging" sound and shows nokia logo without light, but when I try to turn it on with charger connected it doesnt work either.
    Can someone tell me how can I fix problem or how can I hard reset it? Thanks.

    This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
    hard reset - hold the following buttons *, 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Bluetooth simulation between J2SE server and J2ME client

    hi there,
    I have a working bluetooth client/server application (using BlueCove), with the server on a PC (the PC has bluetooth hardware) and the client on a mobile telephone.
    I wish to move the application to a bluetooth simulated environment, however.
    To simulate bluetooth between 2 mobiles, I could open 2 instances of the WTK simulator and the mobiles will find each other -- but this doesn't meet my needs. I wish to simulate the bluetooth environment between a J2SE server and a J2ME client.
    Can I do this using the wireless toolkit? Does anyone have other ideas?
    thanks,
    Manoj

    OK - I have the solution.
    My PC (server) code used BlueCove to talk to the bluetooth stack. The trick is to use Sun's own KVM packages. This creates a virtual bluetooth device on your machine, shared by the WTK emulator.
    Here's the server code:
    package com.encube;
    import java.awt.BorderLayout;
    import java.io.InputStream;
    import javax.microedition.io.Connector;
    import javax.microedition.io.StreamConnection;
    import javax.microedition.io.StreamConnectionNotifier;
    import javax.swing.JFrame;
    import javax.swing.JList;
    import javax.swing.JScrollPane;
    import javax.swing.JTextArea;
    import com.sun.kvem.bluetooth.BluetoothStateException;
    import com.sun.kvem.bluetooth.DiscoveryAgent;
    import com.sun.kvem.bluetooth.LocalDevice;
    public class Server {
         public static final String UUID_STRING = "A781FDBA229B486A8C21CEBD00000000";
         public static final String SERVICE_NAME = "BTCHATSVR";
         private StreamConnectionNotifier server;
         JFrame jframe;
         JTextArea textArea;
         public static void main(String[] args) {
              Server svr = new Server();
              svr.doWork();
         public void doWork() {
              this.jframe = new JFrame("BT Server");
              this.jframe.setLayout(new BorderLayout());
              this.textArea = new JTextArea(6, 20);
              JScrollPane jsp = new JScrollPane(this.textArea);
              this.jframe.add(jsp, BorderLayout.CENTER);
              this.jframe.pack();
              this.jframe.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
              this.jframe.setVisible(true);
              startServer();
         public void logMessage(String message) {
              this.textArea.setText(this.textArea.getText() + message + "\n");
              this.textArea.setCaretPosition(this.textArea.getText().length());
         public void startServer() {
              LocalDevice local;
              try {
                   local = LocalDevice.getLocalDevice();
                   local.setDiscoverable(DiscoveryAgent.GIAC);
                   this.logMessage("max of "
                             + LocalDevice
                                       .getProperty("bluetooth.connected.devices.max")
                             + " connection(s) supported");
                   String url = "btspp://localhost:" + UUID_STRING + ";name="
                             + SERVICE_NAME;
                   server = (StreamConnectionNotifier) Connector.open(url);
                   this.logMessage("waiting for connection...");
                   StreamConnection conn = server.acceptAndOpen();
                   this.logMessage("connection opened");
                   InputStream is = conn.openInputStream();
                   byte buffer[] = new byte[1000];
                   while (true) {
                        int numChars = is.read(buffer);
                        String s = new String(buffer);
                        logMessage("received from mobile phone: " + s.substring(0, numChars));
              } catch (Exception e) {
                   this.logMessage(e.getMessage());
    }You need to include the location of WTK as the kvem.home define. If its installed in c:\wtk22 (the default), start the server with the parameter -Dkvem.home="c:\wtk22". You also need to include these 3 libraries:
    c:\wtk22\wtklib\gcf-op.jar
    c:\wtk22\wtklib\kenv.zip
    c:\wtk22\wtklib\kvem.jar
    That's it for the server. My code of the sample client (the mobile phone, running in the WTK emulator) is messy (sorry about that -- still cleaning it up)!
    import java.io.IOException;
    import java.io.OutputStream;
    import java.util.Enumeration;
    import java.util.Timer;
    import java.util.TimerTask;
    import java.util.Vector;
    import javax.bluetooth.BluetoothStateException;
    import javax.bluetooth.DeviceClass;
    import javax.bluetooth.DiscoveryAgent;
    import javax.bluetooth.DiscoveryListener;
    import javax.bluetooth.LocalDevice;
    import javax.bluetooth.RemoteDevice;
    import javax.bluetooth.ServiceRecord;
    import javax.bluetooth.UUID;
    import javax.microedition.io.Connector;
    import javax.microedition.io.StreamConnection;
    import javax.microedition.lcdui.Display;
    import javax.microedition.lcdui.Form;
    import javax.microedition.lcdui.StringItem;
    import javax.microedition.midlet.MIDlet;
    import javax.microedition.midlet.MIDletStateChangeException;
    public class MainMIDlet extends MIDlet {
         protected void destroyApp(boolean arg0) throws MIDletStateChangeException {
              // TODO Auto-generated method stub
         protected void pauseApp() {
              // TODO Auto-generated method stub
         protected void startApp() throws MIDletStateChangeException {
              MainForm mainForm = new MainForm();
              Display.getDisplay(this).setCurrent(mainForm);
              mainForm.initializeDisplay();
    class MainForm extends Form {
         public static final String UUID_STRING = "A781FDBA229B486A8C21CEBD00000000";
         private StringItem log;
         private DiscoveryAgent agent;
         Object lock = new Object();
         static EndPoint currentEndPoint;
         static Vector serviceRecords = new Vector();
         public MainForm() {
              super("BT Client");
         public void initializeDisplay() {
              this.log = new StringItem("", "");
              this.append(this.log);
              try {
                   LocalDevice local = LocalDevice.getLocalDevice();
                   agent = local.getDiscoveryAgent();
                   agent.startInquiry(DiscoveryAgent.GIAC, new Listener(this, agent));
              } catch (BluetoothStateException e) {
                   this.logMessage(e.getMessage());
         public void logMessage(String message) {
              this.log.setText(this.log.getText() + message + "\n");
         public void processServiceRecord(ServiceRecord sr) {
              try {
                   String url = sr.getConnectionURL(
                             ServiceRecord.NOAUTHENTICATE_NOENCRYPT, false);
                   logMessage("opening URL " + url);
                   StreamConnection conn = (StreamConnection) Connector.open(url);
                   OutputStream os = conn.openOutputStream();
                   String smessage = "test message from phone emulator";
                   os.write(smessage.getBytes());
              } catch (IOException e) {
                   logMessage("error while processing service record: "
                             + e.getMessage());
         class Listener implements DiscoveryListener {
              private MainForm mainForm;
              private Vector pendingEndPoints;
              private DiscoveryAgent agent;
              public Listener(MainForm mainForm, DiscoveryAgent agent) {
                   this.mainForm = mainForm;
                   this.agent = agent;
                   this.pendingEndPoints = new Vector();
              public void deviceDiscovered(RemoteDevice dev, DeviceClass deviceClass) {
                   this.mainForm.logMessage("found device");
                   this.pendingEndPoints.addElement(new EndPoint(dev));
              public void inquiryCompleted(int arg0) {
                   this.mainForm.logMessage("done searching for devices");
                   for (Enumeration enm = this.pendingEndPoints.elements(); enm
                             .hasMoreElements();) {
                        EndPoint ep = (EndPoint) enm.nextElement();
                        ep.calculateRemoteName();
                        this.mainForm.logMessage("device name: " + ep.getRemoteName());
                   new Timer().schedule(new DoServiceDiscovery(), 100);
              public void servicesDiscovered(int transID, ServiceRecord[] arg1) {
                   mainForm.logMessage("found " + arg1.length
                             + " service(s) on device "
                             + currentEndPoint.getRemoteName());
                   for (int i = 0; i < arg1.length; i++) {
                        serviceRecords.addElement(arg1);
              public void serviceSearchCompleted(int arg0, int arg1) {
                   synchronized (lock) {
                        * unlock to proceed to service search on next device see
                        * DoServiceDiscovery.run()
                        lock.notifyAll();
                   mainForm.logMessage("done searching for services on "
                             + currentEndPoint.getRemoteName());
              * Inner class. Called a short time after the last device is found.
              class DoServiceDiscovery extends TimerTask {
                   public void run() {
                        try {
                             UUID uuids[] = new UUID[2];
                             * ok, we are interesting in btspp services only and only
                             * known ones -- check for our UUID
                             uuids[0] = new UUID(0x1101);
                             uuids[1] = new UUID(MainForm.UUID_STRING, false);
                             for (Enumeration enm = pendingEndPoints.elements(); enm
                                       .hasMoreElements();) {
                                  EndPoint ep = (EndPoint) enm.nextElement();
                                  mainForm.logMessage("searching for services on "
                                            + ep.getRemoteName());
                                  currentEndPoint = ep;
                                  ep.transId = agent.searchServices(null, uuids,
                                            ep.remoteDev, new Listener(mainForm, agent));
                                  synchronized (lock) {
                                       try {
                                            lock.wait();
                                       } catch (InterruptedException e) {
                                            // do nothing
                                            mainForm.logMessage("exception while waiting: "
                                                      + e.getMessage());
                             mainForm.logMessage("discovered all services; found "
                                       + serviceRecords.size() + " record(s)");
                             * assume we have just 1 service record
                             if (serviceRecords.size() > 0) {
                                  processServiceRecord((ServiceRecord) serviceRecords
                                            .elementAt(0));
                        } catch (Exception e) {
                             mainForm.logMessage("error during service discovery: "
                                       + e.getMessage());
    class MiscUtils {
         * Get the friendly name for a remote device. On the Nokia 6600, we're able
         * to get the friendlyname while doing device discovery, but on the Nokia
         * 6230i, an exception is thrown. On the 6230i, we get the friendly name
         * only after all devices have been discovered -- when the callback
         * inquiryCompleted is called.
         * @param dev
         * the device to examine
         * @return a friendly name for the device, otherwise the IP address as a
         * hex-string
         public static String getDeviceName(RemoteDevice dev) {
              String devName;
              try {
                   devName = dev.getFriendlyName(false);
              } catch (IOException e) {
                   devName = dev.getBluetoothAddress();
              return devName;
         public static EndPoint findEndPointByTransId(Vector endpoints, int id) {
              for (int i = 0; i < endpoints.size(); i++) {
                   EndPoint endpt = (EndPoint) endpoints.elementAt(i);
                   if (endpt.getTransId() == id) {
                        return endpt;
              return null; // not found, return null
    class EndPoint {
         // remote device object
         RemoteDevice remoteDev;
         // remote device class
         DeviceClass remoteClass;
         // remote service URL
         String remoteUrl;
         // service hosted on this device -- populated after searching for devices
         ServiceRecord serviceRecord;
         // bluetooth discovery transId, obtainsed from searchServices
         int transId = -1; // -1 must be used for default. cannot use 0
         // local user nick name
         String localName;
         // remote user nick name
         String remoteName;
         // vector of ChatPacket pending to be sent to remote service.
         // when message is sent, it is removed from the vector.
         Vector msgs = new Vector();
         public EndPoint(RemoteDevice rdev) {
              remoteDev = rdev;
         * This functionality isn't called in the constructor because we cannot
         * retrieve the friendly name while searching for devices on all phones. On
         * some phones we have to wait until after devices have been discovered.
         public void calculateRemoteName() {
              this.remoteName = MiscUtils.getDeviceName(this.remoteDev);
         public RemoteDevice getRemoteDev() {
              return remoteDev;
         public String getRemoteName() {
              return remoteName;
         public ServiceRecord getServiceRecord() {
              return serviceRecord;
         public void setServiceRecord(ServiceRecord serviceRecord) {
              this.serviceRecord = serviceRecord;
         public int getTransId() {
              return transId;
    ...and that's it. Start the server, then the client (all on the same machine) and you've simulated bluetooth between the 2.
    To get the server working with a real mobile, you'll need to use the BlueCove library instead of the 3 WTK jars (and can remove the kvem.home directive as well). The rest of the code should remain the same (haven't quite tested that yet!).
    cheers
    Manoj
    null

Maybe you are looking for